ECC install on HA - which SAPINST options do I use?

I am attempting to install ECC 6.0 and have a dilemma. When installing ECC 6.0 I have noticed the HA selection in the SAPinst screen. If I plan to use an HA solution that uses HW replication, do I do a normal install and then setup the HA solution afterwords.
I am installing DB/CI on same server and use the HA solution for failover to another server. I also want to install separate enque server.
So do I use the sapinst HA install option or the normal install?
Thanks
Alex

Actually I was able to set this up using her Apple ID for ICloud and for ITunes, and did finally get it to work to prompt me for permissions sp that it would be charged to my account, but in the end I went back to just using her ID for ICloud and mine for ITunes, as I would have to pay for another Match account. That was a deal killer for me with four in my family. I don't want to pay for four Matches.

Similar Messages

Which kerning option do you use in After Effects, and which should be the default?

Which kerning option do you use, Metrics or Optical?
Which do you think should be the default?
How would you feel about us changing the default to Optical and creating a new preference where you can set the default?

OK. Here's where we've ended up for now:
One of our software engineers is working on fixing the bug that keeps the setting from being persistent. So, if you like Optical, you can set it that way once and it will be the default for new text layers created after that.
We're not going to change the default right now. Our thinking is that fixing the bug makes it so that the people who want Optical only need to change it once, and we should continue to match Photoshop and Illustrator with their default. Also, Angie makes a good case that even if Optical is the right solution much of the time, having the default be Optical will cause people to miss out when a type designer has done the right thing and done the pairs correctly for the Metrics case.
We'll revisit this decision if it turns out that our incremental step of just fixing the bug isn't enough to satisfy everyone.
Thanks for the feedback, everyone.

Which SLD option should be used while Installing BI in SAP

hi all,
I had installed my BI development server with local SLD. now while installing quality server i want to use the same SLD which is there in development.now while installation its ask for the option of choosing SLD.
can i choose use central SLD and give the host name of development SLD.is this the correct procedure or should i install using the option
"Configure a local SLD"
Regards,
Priya

If you want to use the Development SLD then for QA you need to select the Central SLD option and then provide the host name and the port no of the Development server.
Decision of Local SLD vs. Central SLD totally depends on the system load. For PI systems generally it is recommended to have local SLD for each D, Q and P.
Hope this helps.
Thanks,
Naveed

Why -jar option used to install a software which is in executable jar file?

Hi all,
i have a query, i have a generic installer which is used to install the oracle weblogic 10.3 software in unix platform(i.e., which is in .jar extension) which is executable jar file.
To install this software which have to use -jar option to install
java -jar net_server<version>_generic.jar
my question that why we use -jar option to install or to extract the software
can any one clarify my doubt...
thanks in advance
abhi
Edited by: sumanth_abhi on Jan 27, 2009 11:50 PM

According to the Jar Guide (http://java.sun.com/j2se/1.4.2/docs/guide/jar/jarGuide.html)
Executable Jar Files
On Microsoft Windows systems, the Java 2 Runtime Environment's installation program will register a default association for Jar files so that double-clicking a Jar file on the desktop will automatically run it with javaw -jar. Dependent extensions bundled with the application will also be loaded automatically. This feature makes the end-user runtime environment easier to use on Microsoft Windows systems.
The Solaris 2.6 kernel has already been extended to recognize the special "magic" number that identifies a Jar file, and to invoke java -jar on such a Jar file as if it were a native Solaris executable. A application packaged in a Jar file can thus be executed directly from the command line or by clicking an icon on the CDE desktop.
Despite that every JAR file can be executed as a program if and only if the META-INF/Manifest.mf contains the Main-Class tag. This done through java -jar jarfile.jar
--olaf

Brand new Mac, had to erase drive through disk utility as time machine back up failed. Now disk utility only has the option to install Mountain Lion which my Mac won't allow. Anyone any ideas as my Mac won't load anything up but disc utility!

Brand new Mac, had to erase drive through disk utility as time machine back up failed on initial setup, USB cable popped out Now can only access disk utility as won't load to log in screen. The only has the option in disc utility is to re-install Mountain Lion which my Mac won't allow or loading another time machine back up but after an hour of it processing, that didn't resolve the issue either! The time machine back up is the latest back up of my Mac Book Pro which was using OS X Maverix. I'm guessing I'm going to have to take my Mac to the store but that would be a hassle so does anyone have any ideas?

Follow this guide using another Mac.
Insert your newly created Mavericks USB into you Mac, press the power button and then hold down 'option,' until it gives you an option to boot from the USB. You will then be able to erase the internal disk with Disk Utility and reinstall Mavericks straight after.
After that you should be able to use Migration Assistant to restore your applications and user data.

Stuck at "Prepare to install minimal configuration" during SAPinst

Dear Experts,
I was trying to install Solution Manager via SAPInst on windows server 2008 R2 and MS SQL 2008, but stuck at "prepare to install minimal configuration" step. The message at the status bar, showed :-
"Java process server0 of instance SOL/DEVBMGS01 [ABAP : ACTIVE, JAVA : (dispatcher: running, server0 : Unknown) did not start after 1:30"
the following is the final part of "sapinst_dev.log" file.
TRACE 2011-01-28 17:37:09.610
NWDialogInstance.getRunningState() done: ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)
TRACE 2011-01-28 17:37:09.610
NWDIState.assertStateProgress(ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN))
TRACE 2011-01-28 17:37:09.610
NWDIState._assertABAPStateProgress(ACTIVE, ACTIVE)
TRACE 2011-01-28 17:37:09.610
NWDIState._assertABAPStateProgress() done
TRACE 2011-01-28 17:37:09.610
NWDIState._assertJavaStateProgress(PARTRUNNING, PARTRUNNING)
TRACE 2011-01-28 17:37:09.610
NWDIState._assertABAPStateProgress() done
TRACE 2011-01-28 17:37:09.610
NWDIState._assertJavaProcessStatesProgress(dispatcherRUNNINGserver0UNKNOWN, dispatcherRUNNINGserver0UNKNOWN)
TRACE 2011-01-28 17:37:09.611
NWDIState._assertJavaProcessStateProgress(dispatcher, RUNNING, RUNNING)
TRACE 2011-01-28 17:37:09.611
NWDIState._assertJavaProcessStateProgress() done
TRACE 2011-01-28 17:37:09.611
NWDIState._assertJavaProcessStateProgress(server0, UNKNOWN, UNKNOWN)
TRACE 2011-01-28 17:37:09.611
NWDIState._assertJavaProcessStateProgress() done
TRACE 2011-01-28 17:37:09.611
NWDIState._assertJavaProcessStatesProgress() done
TRACE 2011-01-28 17:37:09.611
NWDIState.unbalancedStates()
TRACE 2011-01-28 17:37:09.611
NWInstState.getElapsedString()
TRACE 2011-01-28 17:37:09.611
NWInstState.getElapsedString() done: 1:30
TRACE 2011-01-28 17:37:09.612
NWDIState.unbalancedStates() done: nw.progress.waitingForStartJavaFailed2SOLDVEBMGS01ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)1:30server0
TRACE 2011-01-28 17:37:09.612
NWDIState.unbalancedStates()
TRACE 2011-01-28 17:37:09.612
NWInstState.getElapsedString()
TRACE 2011-01-28 17:37:09.612
NWInstState.getElapsedString() done: 1:00
TRACE 2011-01-28 17:37:09.612
NWDIState.unbalancedStates() done: nw.progress.waitingForStartJavaFailed2SOLDVEBMGS01ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)1:00server0
TRACE 2011-01-28 17:37:09.613
NWException thrown: nw.progress.waitingForStartJavaFailed2:
Java process server0 of instance SOL/DVEBMGS01 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 1:30 minutes. Giving up.
TRACE 2011-01-28 17:37:09.613
Function setMessageIdOfExceptionMessage: nw.progress.waitingForStartJavaFailed2
WARNING[E] 2011-01-28 17:37:09.613
 CJSlibModule::writeError_impl()
CJS-30151 Java process server0 of instance SOL/DVEBMGS01 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 1:30 minutes. Giving up.
TRACE 2011-01-28 17:37:09.698 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-01-28 17:37:09.822 [sixxcstepexecute.cpp:950]
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|startJava was executed with status ERROR .
TRACE 2011-01-28 17:37:09.876 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > MS SQL Server > Central System > Central System. You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS. </body></html>
TRACE 2011-01-28 17:37:09.876 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2011-01-28 17:37:23.236 [sixxcstepexecute.cpp:1003]
An error occured and the user decided to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|startJava".
Does anyone knows what went wrong?
Regards,
Abraham

Please paste dev_server0 and std_Server0 logs from the work directory.
Thanks
Sunny

Creating ASM after installing grid infrastructure software only option

OS environment is Solaris 10 sparc (64 bit) with suncluster 3.2. Oracle version is 11.2.0.3.0... ASM configuration also..
Grid binaries (i.e. GRID_HOME) will be placed in local disk on both the nodes. Oracle Binaries (ORACLE_HOME) also will be placed in local disk on both the nodes..Oracle database only will be placed in shared storage with ASM...
My doubt is If i select "install grid infrastructure software only" option, can i create separate ASM instance on each node by using "$GRID_HOME/dbs/initSID.ora" file of each node?
Is it possible to create two ASM instance in the clustered environment since Single instance Oracle ASM is not supported with Oracle 11g release 2 as per "Oracle® Solaris Cluster Data Service for Oracle Guide"?
Please tell me the suggestion if anyone knows........
Thanks & Regards
Ramesh M

Hi,
First of all "software only installation" only places the binaries onto the local disks. This software only binaries later have to be configured either for GI Standalone Server or GI for Cluster environment. It differs in the root.sh script to be called, and in the need to use config.sh to configure the cluster environment.
So by configuring standalone server GI later, you will only have a local ASM installation.
However you will not end up with a initSID.ora file for the ASM instance, since the spfile of the ASM instance will always be placed inside the first ASM diskgroup to be configured. (the same for GI cluster, as for GI SI).
Now creating clustered ASM and SI ASM => you can only create clustered ASM for nodes which participate in the same cluster. So if you configured both nodes with clustered GI, but did not tell them to be 1 cluster, but 2, then both ASM instances will be separate. Resulting in beeing ASM1 instance on both nodes, and not able to mount the same diskgroup (consistent of the same disks) on both servers at the same time. So in the end having 2 clusteres consisting of one node each, does not really differ much from the ASM point of view, other than having ASM1 as instance name instead of +ASM (in GI SI). The difference is in the cluster stack below ASM, which simply has more processes and requirement for the clustered GI version.
And last but not least, yes you can have separate ASM instances on 2 separate nodes. If they are not part of the same cluster, the ASM instances are independent.
They are not really single instances, since they know that they are RAC ASMs, however they do not communicate with other nodes. However you may only have one ASM instance on each host (either physical or virtual host, as you can have an ASM instance in each solaris container).
Hope that clarifies it.
Regards
Sebastian

**I am trying to install CRXi R2 , but some option is there ..

Hi,
I am trying to install CRXi R2 , but some option is there do u want to install server or client ??
which option should i select?? what does it mean
i have gone thru some PDF's of CRXi R2 ,but i am not getting complete info
so i am asking , can any body answer
or send me some material on this , i am really not finding on web
Regards,
kathyaini
Edited by: kolahalam kathyaini on Dec 2, 2008 9:34 AM

Hi,
It seems that you are having issue with Crystal reports
Post your question in Crystal Reports Design forum.
That forum is monitored by qualified technicians and you will get a faster response there. Also, all .CR Design queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Amit

I have downloaded/paid fora plug in from adobe site (cracked backgrounds) it told me ti install creative Cloud which i have done but i cannot install the plug in into lightroom5 via plug in manger to use the backgrounds...please help as this is the firs

Ihave downloaded/paid for a plug in from adobe site (cracked backgrounds) it told me ti install Creative Cloud which i have done it shows the plug in on there as downloaded but i cannot install it into lightroom 5 to use? i have tried the plug in manger but it says cannot install plug in..also downloaded the Adobe extension manager cc but that does not add either....Please help first time i ave tried to install a plug in !!!!!! Lucy

Dear Lucy
Please remember to unzip the file from your Downloads folder in order to load them into Lightroom.
What is the error in Lightroom?
Did you read the 'Where to Find it' section?
Thanks,
Krystal - Add-ons team

HT5622 I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that par

I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that particular function is in grey and cannot be clicked on

Depending on what kind of computer you have, you're gonna need to put that backup in the appropriate folder or itunes is not gonna be able to see it for you to use.

I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. what do i need to do?

I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. What do i need to do?

Does it happen with the apps that came with the iPod?
Does it happen with all apps you have downloaded/installed?
Have you ried deleting the apps and redownload/install the apps? You will not be charged again if you are signed into the same iTunes account that originally purchased the apps.
Next would be to restore from backup
Last would be to restore to factory defaults/new iPod.

Got an iPhone 4. Running OS 10.6.3. Need to install new iTunes, which requires 10.6.8. Do I have to install 10.6.4-10.6.8 one at a time?

Got an iPhone 4. Running OS 10.6.3. Need to install new iTunes, which requires 10.6.8. Do I have to install 10.6.4-10.6.8 one at a time? Here is my hardware setup:
Model Name:          MacBook
Model Identifier:          MacBook2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.16 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          4 GB
Bus Speed:          667 MHz
Boot ROM Version:          MB21.00A5.B07
SMC Version (system):          1.17f0

No. Download and install the Combo update for Snow Leopard 10.6.8 which will get any version of 10.6 to 10.6.8
Allan

Which browser is better to use as an option to Safari and how do you download it?

Which browser is better to use as an option to Safari and how do you safely download it? Thanks

I use Firefox when a site doesn't work well with Safari. Some people like Google's Chrome, but I find it too instrusive and do not trust Google's security. You can download Firefox from firefox.com.
Regards.

Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing the software, which it was.

Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.

Hello Everyone. I have an older version of aperture, aperture 2, that I wanted to install on my MAC. I attempted the installation, and during the install there was a check to see if my computer was capable of installing the software, which it was. After the install completed I tried running the software, and I got a message telling me I can't run this version with my operating system. Does anyone know why I can't run the aperture software, and why I was allowed to install it without some notification.

Sd_mod, sr_mod: which kernel options?

Hello all,
I just started fiddling around with compiling my own kernel because I'm not satisfied with the performance/latency of my desktop system.
I thought it would be a good thing to start with
http://wiki.archlinux.org/index.php/Kernel_Compilation_From_Source
to get a hang of the whole procedure. I compiled a few kernels with minor changes (moving modules into the kernel etc.) just to see what happens and practice a bit. It all worked fine, adjusting menu.lst, mkinitcpio and so on...
Then I started to remove all the stuff that I (thought I ) didn't need for my laptop (TravelMate 4650). I ran into problems when mkinitcpio reported 'ata_piix' and other ata stuff missing but I went back to gconfig and it was easy to find out what I shouldn't have removed.
Now -- after ruthlessly double-clicking around in gconfig ("if it doesn't sound familiar, it has to go" ) -- mkinitcpio tells me I need 'sr_mod' and 'sd_mod', some really important SCSI modules (apparently). I don't even have SCSI devices but my disks are all /dev/sd* so that means I need SCSI support, right? This is the message:
[13:50:26][luke@calculon][~/kernelbuild/linux-2.6.23]$ sudo mkinitcpio -k 2.6.23-MY_ARCH -g /boot/kernel26-my-arch.img
:: Begin build
:: Parsing hook [base]
:: Parsing hook [udev]
:: Parsing hook [autodetect]
:: Parsing hook [pata]
ERROR: module 'sd[-_]mod' not found
ERROR: module 'sr[-_]mod' not found
:: Parsing hook [keymap]
:: Parsing hook [filesystems]
:: Generating module dependencies
:: Generating image '/boot/kernel26-my-arch.img'...SUCCESS
My problem now is that I can't figure out which kernel options are related to these two modules. The 'SCSI device support' section lists 'BLK_DEV_SD' and 'BLK_DEV_SR' which I activated with the 'M' (I looked up the config from abs to find the standard settings). I still get the same message. Does it make a difference (to mkinitcpio) if you mark something 'M' or 'Y'? I mean, does it realize that if something isn't there as a modul it might be integrated in the kernal already?
All in all I have to say is that the whole kernel compilation is not that complicated. I was always afraid to try but now (thanks to Arch) I started diving into the innards (eewww) of a Linux system. The important thing is to keep a working backup version in case something goes wrong (which will happen).
I've read a little (only superficially so far) about patching the kernel to increase performance/responsiveness on the desktop (which is my ultimate goal). There seems to be a big discussion going on (with Con Colivas and all) about this issue. I know, there are a lot of topics about this already but is applying kernel patches worth the effort? Can you feel a difference in performance? I've set the Processor Family option the Pentium-M (my CPU) and I set the Preemption Model to PREEMPT but that hasn't really made a difference. If you ask me, it's probably worse than before.
OK, the last paragraph was a little OT, my main problem are 'sd_mod' and 'sr_mod' . It takes 20 minutes to compile every time so I'm a little reluctant to just use trial and error with every module.
Thanks for immediate help or giving relevant links. Is there something that tells you exactly which module is linked to which config option? That would be really helpful.
--masterluke
Last edited by mmmasterluke (2008-02-13 13:47:56)

I tried to mkinitcpio with both scsi disk support built into the kernel and as a module both ways I am not able to make my system work with the new kernel.
I get the same error if I try to run mkinitcpio with scsi disk support build into the kernel.
When the scisi disk sopport is left to be loaded later as a module, mkinitcpio works fine but later while booting the system complains that the partition was not found, i.e /dev/disk/by-uuid/"some kinda code" was not found.
I am not able to boot into my new kernel.
please help.

ECC install on HA - which SAPINST options do I use?

Similar Messages

Maybe you are looking for