ECC - MQ - XI1 - XI2 - AS2 Connectivity

Hi ,
We have a requirement of sending an XML file from ECC unix box to XI via MQ-JMS communication and then from XI to another XI system and finally to third party system via AS2 protocol. This is a simple file transfer interface from ECC to the third party system without any modification to the data or mapping requirement.
The solution i am thinking of is as follows:
1. MQ picks up the file from desginated interface directory on the ECC unix box and sends it into XI-1through JMS adapter
2. Dummy message interface will receive the file and send to the dummy receiver interface of XI through receiver determination
3. receiver interface will send the file to XI-2 system via XI (http) receiver Adapter
4. dummy sender interface in XI-2 will receive the file through XI (http) sender adapter
5. dummy receiver interface in XI-2 will send the file to third party system via AS2 adapter
Can you please confirm if this approach will work? or suggest any other/better approach to transfer the files across?
Thanks

>
> We have a requirement of sending an XML file from ECC unix box to XI via MQ-JMS communication and then from XI to another XI system and finally to third party system via AS2 protocol. This is a simple file transfer interface from ECC to the third party system without any modification to the data or mapping requirement.
>
First you have to use File adapter to read data data from ECC unix box then use use JMS Receiver adapter to send data to MQ,MQ will not read data direclty from ECC File system.
so your flow will be like this
ECC->XI--->MQ.
REMAINING PART you can design...
Regards,
Raj

Similar Messages

HTTP 403 Error in AS2 Connection

Hi,
Would really appreciate some inputs on this one. Just to give a background, we're tying to establish an AS2 connection between us and a 3rd party. The 3rd party tried to send a test message using our connecton details, but they got an HTTP 403 Error - Forbidden when trying to send a message.
I have confirmed the following:
- All the certificates (AS2 certificate, SSL, etc) needed for this has been uploaded in the 3rd party's system.
- The firewall has be opened for the 3rd party's sending IP address.
- We have also uploaded the 3rd party's certificates to our system.
- I checked the destination url of the message, and it seems that it is up as well.
As I am not very familiar and new to AS2, I'm currently stuck and running out of possible options.
Is anyone familiar with this? And, a possible cause and solution?
Thanks a lot!

Hi Ivan,
Actually, we have verified our AS2 ID that is set up in the 3rd party already, and it should already be the expected one. Although, I think I will need to ask them the full details already.
I also tried the tool you gave (was helpful btw), and it seems that I was able to send a message successfully to the 3rd party. This was the log:
OUTGOING TRANSMISSION TO ... Originator: ... Recipient: ... Signature: on Encryption: on Compression: off MDN Requested: Asynchronous: http://localhost:8080/AsyncMDN.aspx MDN Signature: on Transmission was successful. -TIMESTAMP Tue, 14 Jul 2009 13:03:20 +08:00 [1247547800343]- Verification of receipt is pending an asynchronous MDN.
The problem is as this software is on my localhost. I'm not sure if it is practical to have the 3rd party test and send to this other connection for this dummy server as this won't be used anyway in the planned implementation.
So I guess the conclusion that I got from this is so far, the configuration that I currently did on the actual connection is supposedly to be correct, and that the problem is on the 3rs party's side? Is that right?

Seeburger AS2 connectivity issues.

Hello,
is it possible to have one single certificate for both AS2 and SSL, using HTTPS protocol.
if yes should we upload the certificates twice (AS2 & SSL)?
Also when we sent some messages via AS2, the seeburger AS2 server seems to be closing the connection abruptly. are there any logs generated on the seeburger side in order to check what actually happened?

Hi
AS2 and SSL follows two different protocols. So It's not possible to use same certificate for both of them.
for AS2 connectivity you can ask your network team to open the network port only for AS2 authentication.
regards
chandra

AS2 Connectivity - SAPXI

Hi,
I am new AS2 connection settings. I just wanted to know is it possible to pick up a file from a folder and send it via AS2 to the Partners VAN ?
I have done with the Scenario with file adaper as sender service and As2 adapter as Reciever service .
Will it work ?
Thanks
Laks

Hi ,
Iam still getting the error messge
"Could not deliver as2 message to partner: 401 [ISS.0084.9004] Access Denied # null"
any idea why i am getting this error message ?
I haven't used Basic Authentication in Receiver AS2 Communication channel ? IS it because of it ?
I checked the detailed error in Runtime Workbench
the error is
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied #
Exception caught by adapter framework: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied #
Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # : javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied #.
Can anyone help ?
Laks

How to check Connectivity between ECC 6.0 and AS2

Hi all
We are having a scenario of connecting an ECC 6.0 with an MDM GDS system through XI .Can we check the settings without doing a proper scenario?As we don't have the details of the Idocs as yet.

Hi,
Check with these
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
/people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
/people/balas.gorla/blog/2007/02/05/r3-xi-mdm-outbound-scenario
/people/sriram.vasudevan3/blog/2005/09/01/mdm-55-data-distribution-using-sap-xi
/people/kamaljeet.kharbanda/blog/2005/09/14/sap-netweavercomplete-information-integration-platform
Regards
Seshagiri

AS2 Connection error in PI

Hi PI Experts,
IDoc to AS2 (HTTPS) scenario.
I am using AS2 Rece Channel with HTTPS Transport Protocol.
PI Receiving the data from ECC and while sending the data from PI to Third Party Partner getting below error .Please help me on this issue.I will appriciate you .
Error:
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: key inappropriate for algorithm., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: key inappropriate for algorithm.
Thanks,
Aadi

Hi Harikumar,
Thanks for your reply, now i am getting different error,
Could not deliver as2 message to partner: java.net.SocketException:
Connection reset # null
Please can you help me on this issue.
Thanks,
Aadi

AS2 Connectivity

Hi
I have installed an AS2 adapter we have loaded all the trusted certificates & configured the receiver channels correctly,When i try to send the data using an AS2 i am getting an
Error***********
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found # , SEEBURGER AS2: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found #
Any help would be highly appeciated...
Thanks
Sri

Hi ,
Iam still getting the error messge
"Could not deliver as2 message to partner: 401 [ISS.0084.9004] Access Denied # null"
any idea why i am getting this error message ?
I haven't used Basic Authentication in Receiver AS2 Communication channel ? IS it because of it ?
I checked the detailed error in Runtime Workbench
the error is
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied #
Exception caught by adapter framework: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied #
Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # : javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied #.
Can anyone help ?
Laks

AS2 connection Error 403 / 400

Hi ,
We are working on AS2 interface,
1.. Sending delivery schedule from Backend - > PI AS2-> 4PL External system ====> This Works
2.. Sending Invoice from 4PL External system -> PIAS2 -> Backend === > This does not work
When sending data from 4PL to PI we are getting error as
"Error" "403 Forbidden;Source file not deleted." ,
if we also get error
Error" "400 Connection Failed (VLProxy java.net.ConnectException: Connection timed out: connect);Source file not deleted."
Kindly help!
Best Regards,
Bijal

For 403 error
check these configurations
This error may have different reasons:
a) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
b) A valid sender agreement is missing.
c) There are more then one AS2 sender agreements with the same sender AND receiver party.
d) The corresponding inbound channel is set to inactive.

Seeburger AS2 - connectivity

Hello,
is it possible to have one single certificate for both AS2 and SSL, using HTTPS protocol.
if yes should we upload the certificates twice (AS2 & SSL)?
Also when we sent some messages via AS2, the seeburger AS2 server seems to be closing the connection abruptly. are there any logs generated on the seeburger side in order to check what actually happened?

Hi,
AS/2 details:
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Seeburger thread:
Refer this forum which talk about the configuration which need to be done for AS2 adapter. This is very helpful:
Re: Pls.. Help Needed.. Seeburger Mapping Names..!!
Re: Seeburger AS2 adapter...
Re: AS2 Module tab.. Mapping Names for modified Standard Msg types ? ? BIC ??
AS2 adpater-- Configuration details for both SND and RCV.
AS2 Sender Adapter -- Need few details.
Flow of data:
EDI-SEEberger-XI-IDOc-R/3
Seeburger info:
Re: seeburger adapter
Re: SEEBURGER's VAN Adapter
AS2 info:
Re: Regarding Seeburger AS2 Adapter
SEEBURGER EDI adapter
Wanna Party ?
Wanna Party ?
How to Set up an SAP XI Integration Directory Scenario with Party to Support EDI Partner Processing
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Here is the link for your reference:
EDIFACT to XML - Stylus Studio Solution
The steps to convert EDI to XML / XSD can be found at the following link:
http://www.stylusstudio.com/edifact_to_xml.html
Stylus studio download link: http://www.stylusstudio.com/xml_download.html
Or
Using the Conversion agent
How to get started using Conversion Agent from Itemfield
Conversion Agent a Free Lunch?
Integrate SAP Conversion Agent by Itemfield with SAP XI
More on the SAP Conversion Agent by Itemfield
SAP XI supports EDIFACT
How to get started using Conversion Agent from Itemfield
More on the SAP Conversion Agent by Itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
SAP XI supports EDIFACT
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
Regards,
Nithiyanandam

AS2 connectivity issue

Hi,
I am facing an issue with connecting through AS2 server to PI server. Below is the scenario:
We receive different types of files from customer (EDI and Non EDI). We have maintained one configuration scenario (CS) for EDI and another one for non EDI. But there is only one Party. Two communication channels, one for EDI transactions and one for non EDI transactions.
I have configured the AS2 setup for EDI transaction and tested. It worked fine. Then I set up the AS2 configuration for Non EDI transaction. (basically two communication channels polling the same AS2 server). When I tested the setup using the stand alone tool i am getting the error as HTTP protocol error. 403 Forbidden.
It works fine if I set up the configuration for only one communication channel. Not working with both the configuration at the same time.
Is it because of two different configuration scenarios (two communincation channels) and same Party? Is there any configuration I need to set up for this scenario?
Please help.
Regards,
Vas

The only option seems to be saving the file at some location and then pick them from there for differnt scenarios. If you go with this approach, you can use single communication channel towards AS2 sender partner. You may agree upon a message subject or AS2 Filename with your EDI partner and then based on Subject or Filename value, place the file in different directories or with different names. For this you may use Dynamic Configuration as I have explained here:
http://wiki.sdn.sap.com/wiki/display/XI/AttribMapper-AssignAS2Filename+Dynamically
Regards,
Prateek Raj Srivastava

HANA views call in ABAP ECC 6.0 via secondary connection

Dear Folks,
We have created views in HANA, same views we need to call it in ABAP ECC 6.0(Netweaver 7.3) i.e. via secondary database connection.
So,
1.Is it possible to call HANA vies in ABAP ECC 6.0?
2.Is there any version limitations? or will work fine on ECC 6.0
3. If yes can you give me sample code of abap to access hana as secondary database
Note : I have gone through Mr. Thomas Jung thread.
Regards,
Amol

Hi Amol,
so, ADBC is available in your system, but you have to make sure that the correct DBSL library for HANA (HDB) is available in your system. You can then just check if you can correctly communicate with the report ADBC_TEST_CONNECTION (using the secondary connection maintained in table DBCON) to your HANA database.
You may have a look at the example on how to select from an external view in report ADBC_QUERY (which selects from a DB table), by using a secondary DB connection to your HANA DB and using the HANA view instead of a DDIC table.
Of course in ADBC you have to take care about the correct type mapping (as you cannot use a DDIC type for definition of your internal table into which you select).
Best,
Jasmin
BTW: One word of precaution, the tasks you try to accomplish is rather cumbersome. We definitively recommend to use a more recent release (e.g. NetWeaver 7.4 SP5 or beyond), however, I think that's not your decision, right?

ECC System Refresh - impacts IDOC connections to PI

All,
Whenever we refresh ECC QA system with prod, we have to do all the ale/IDOC settings all over again in ECC QA to connect to QA PI.
Can you please list the tables that are used for We20, We21, BD64, SM59 so that BASIS can take a backup of these tables before refresh and apply the backup once the system refresh is complete.
Thanks.

Hi Vicky,
Partner profile (WE20) is store in below tables
EDPP1: General partner profile
EDP12: Partner profile outbound, additional data NAST
EDP13: Partner profile outbound
EDP21: Partner profile inbound
regards,
Harish

VERY VERY URGENT..!! AS2 connectivity to partner system.

Hi all,
I supposed to do EDI --> Idoc Scenario
Im having partners A,B,C with three sender communication channels (for 3 interfaces)
CC_AS1   for partner A ,
CC_AS2   for partner B,
CC_AS3   for partner C.
all the messages (ediorders,ediinvoice .. etc) will be sending to the AS2 url
HTTP://<your-xi-server>:50000/SeeburgerAS2/AS2Server
from there the messages has to point to each communication channel (either to CC_AS1 or CC_AS2 or CC_AS3) depending on the
Partner(A,B,C) -- which we will provide in party configuration and
message(orders,invoice.. etc).
My question is
1. How it will point to each communication channel?
2. How it will transfer the correct message to correct CC.?
3. What are the details we need to provide in AS2 sender communication channel to differentiate each communication channel.?
Need help urgently.
Thank You.
Note : Make sure that we are not using any WAN or Mail box .. to give mail subject line in Message subject.
Regards
Deepthi.

Normally :
The messages will flow from partner system thorough WAN to Mail box and we will put that mail subject (ex: orders_918902)to the Message subject of AS2 sender adapter.
So it will pick the files according to the subject of mail box.
Now to reduce the cost, they are completely replacing this WAN or mail box.
The messages now will flow to AS2 server through internet.
HTTP://<your-xi-server>:50000/SeeburgerAS2/AS2Server
So all the messages from all the partners will be pointing to that url.
Now my problem is how the messages will differentiate to which communication channel it has to go??
EX: Orders will be coming from three partners(A,B,C)
then how the AS2 adapter of party A will receive the correct msg which belongs to them.
We need to differentiate that by giving some information in AS2 adpater.. either Message subject or someother information..
I need that exact information.
Regards
Deepthi.

Question with AS2 Connectivity with eXchange (JCAPS 5.1.3 U2)

All,
I'm using the eXchange product that goes with JCAPS. We are using a Business Protocol of X12 and a delivery protocol of AS2 over HTTP/HTTPS. I am getting the following exception and am wondering if anyone as seen this error before.
Regards,
John
Line 2.1 expecting: {http://seebeyond.exchange.httpHeaders}AS2HTTPHeaders, found: {}HTTP
Stack:
com.stc.otd.runtime.UnmarshalException: Line 2.1 expecting: {http://seebeyond.exchange.httpHeaders}AS2HTTPHeaders, found: {}HTTP
at AS2HTTPHeaders.AS2HTTPHeaders_.unmarshal(AS2HTTPHeaders.AS2HTTPHeaders_:902)
at AS2HTTPHeaders.AS2HTTPHeaders_.unmarshalFromString(AS2HTTPHeaders.AS2HTTPHeaders_:1024)
at com.sun.b2b.as2.collab.jcdEX_HttpClient_AS2.execute(com.sun.b2b.as2.collab.jcdEX_HttpClient_AS2:52)
at Deployment.cmAS2_Handlers_jcdEX_HttpClient_AS21.jcdEX_HttpClient_AS2_Runtime_Handler.handleRequest(Deployment.cmAS2_Handlers_jcdEX_HttpClient_AS21.jc
dEX_HttpClient_AS2_Runtime_Handler:393)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:140)
at com.sun.ejb.containers.EJBLocalObjectInvocationHandler.invoke(EJBLocalObjectInvocationHandler.java:135)
at $Proxy64.handleRequest(Unknown Source)
at com.stc.codegen.eInsightImpl.runtime.ejb.MDBWSProvider.invoke(MDBWSProvider.java:200)
at sun.reflect.GeneratedMethodAccessor3895.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.SecurityUtil$2.run(SecurityUtil.java:146)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.application.EJBSecurityManager.doAsPrivileged(EJBSecurityManager.java:940)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:151)
at com.sun.ejb.containers.MessageBeanContainer.deliverMessage(MessageBeanContainer.java:948)
at com.sun.ejb.containers.MessageBeanListenerImpl.deliverMessage(MessageBeanListenerImpl.java:42)
at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:136)
at $Proxy71.invoke(Unknown Source)
at com.stc.bpms.bpelConnector.impl.AbstractWSProvider.invoke(AbstractWSProvider.java:105)
at com.stc.bpms.bpelImpl.runtime.Interpreter$1.run(Interpreter.java:659)
at com.stc.bpms.bpelConnector.impl.ExecutorImpl$WorkImpl.run(ExecutorImpl.java:338)
at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:54)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:382)
-- caused by --
at Line 2.1: com.stc.otd.runtime.UnmarshalException: Line 2.1 expecting: {http://seebeyond.exchange.httpHeaders}AS2HTTPHeaders, found: {}HTTP
at com.stc.otd.xsd.runtime.provider.XsdParse.match(XsdParse.java:1123)
at com.stc.otd.xsd.runtime.provider.XsdParse.parseComplex(XsdParse.java:1037)
at com.stc.otd.xsd.runtime.provider.XsdParse.parse(XsdParse.java:1433)
at com.stc.otd.xsd.runtime.provider.XsdParse.parse(XsdParse.java:1411)
at AS2HTTPHeaders.AS2HTTPHeaders_.unmarshal(AS2HTTPHeaders.AS2HTTPHeaders_:900)
at AS2HTTPHeaders.AS2HTTPHeaders_.unmarshalFromString(AS2HTTPHeaders.AS2HTTPHeaders_:1024)
at com.sun.b2b.as2.collab.jcdEX_HttpClient_AS2.execute(com.sun.b2b.as2.collab.jcdEX_HttpClient_AS2:52)
at Deployment.cmAS2_Handlers_jcdEX_HttpClient_AS21.jcdEX_HttpClient_AS2_Runtime_Handler.handleRequest(Deployment.cmAS2_Handlers_jcdEX_HttpClient_AS21.jc
dEX_HttpClient_AS2_Runtime_Handler:393)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:140)
at com.sun.ejb.containers.EJBLocalObjectInvocationHandler.invoke(EJBLocalObjectInvocationHandler.java:135)
at $Proxy64.handleRequest(Unknown Source)
at com.stc.codegen.eInsightImpl.runtime.ejb.MDBWSProvider.invoke(MDBWSProvider.java:200)
at sun.reflect.GeneratedMethodAccessor3895.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.security.SecurityUtil$2.run(SecurityUtil.java:146)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.application.EJBSecurityManager.doAsPrivileged(EJBSecurityManager.java:940)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:151)
at com.sun.ejb.containers.MessageBeanContainer.deliverMessage(MessageBeanContainer.java:948)
at com.sun.ejb.containers.MessageBeanListenerImpl.deliverMessage(MessageBeanListenerImpl.java:42)
at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:136)
at $Proxy71.invoke(Unknown Source)
at com.stc.bpms.bpelConnector.impl.AbstractWSProvider.invoke(AbstractWSProvider.java:105)
at com.stc.bpms.bpelImpl.runtime.Interpreter$1.run(Interpreter.java:659)
at com.stc.bpms.bpelConnector.impl.ExecutorImpl$WorkImpl.run(ExecutorImpl.java:338)
at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:54)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:382)

the jsp pages are pre-compiled in a folder :
logicalhost\is\domains\MyDomain\generated\jsp\j2ee-apps\dpMyDP\My_war\org\apache\jsp\
sometimes these aren't updated.

Error Connecting to SLD, while CC integration with ECC 6.0

Dear All,
I am using the CC v and from ECC IDES. I cannot connect to the SLD. It is giving an Error.
When I try to register the Server Programs in Vis Admin and click the SET button I am getting an error "Error Adding Bundles". In the ABAP part I am getting the same error of RFC connection.
Now from ECC when I do a SM59, and then goto TCP/IP connections, on creating this connections I cannot make them UNICODE as the R3 system is Non-Unicode. So these dont work.
What am I supposed to do.
Please let me know. This is very urgent and useful replies will be awarded full points.
Thanks and Best Regards
Chakra and Somnath

Replying to this old post hoping for some answers.
We had researched this and converted to Integrated ITS using our ZCATW over a year ago. The notes read that while integrated ITS is a suppoted platform, ESS scenarios for which newer technology exists are no longer supported. We tested ZCATW under ECC5 and decided to move forward because of a pending technical upgrade. We are now in the middle of the technical upgrade and wishing to keep it technical we are trying to keep ZCATW going and then look at the newer components as a seperate project. Has anyone found a way to overcome the above issue in CATW/ECC6?
Thanks,
Doug

ECC - MQ - XI1 - XI2 - AS2 Connectivity

Similar Messages

Maybe you are looking for