ECC & PI on same Server

Hi All,
Hardware
Server u2013 4 x 4 cores
RAM u2013 64 GB
HDD u2013 6 TB
OS u2013 Win 2K8 R2
DB u2013 SQL Server 2K8 R2
System Landscape
SAP SRM 7.0
SAP ECC IDES 6.04
SAP MDM 7.1
SAP CE 7.2
SAP NW EP 7.01
SAP NW PI 7.1 EHP1
Now we are facing issue in starting PI & ECC system. All others systems are running fine.
When ECC system is getting started successfully, PI is not getting started.
When PI system is started successfully, ECC is not getting started.
Is there any memory and parameter settings, that needs to be configured to make both system to run in parallel.
Regards
Ponnusamy

> Now we are facing issue in starting PI & ECC system. All others systems are running fine.
> When ECC system is getting started successfully, PI is not getting started.
> When PI system is started successfully, ECC is not getting started.
>
> Is there any memory and parameter settings, that needs to be configured to make both system to run in parallel.
You need to configure ALL those systems running in parallel to use only a certain amount of memory. If you use the default all systems will try to allocate half of the physical memory.
Markus

Similar Messages

How to install both solution manager and ECC Development on same server

Hi All,
Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
Pls let me know.
Regards,
Karthik

Hi Karthik,
I try to answer you message, my answer may not be sufficient for you.
Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
Verify sizing of both systems.
SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
Best regards,
Ruediger Stoecker

Install ECC 6.0 and Solution Manager on same server Error (MaxDB/Linux)

I have installed Solution manager on one server and then ECC 6 also in the same server with another SID. during the installation it errored out at phase "SLD configuration" with UME error , J2EE_ADMIN locked etc..we checked the user id and noticed it got locked in ECC 6 system and we unlocked it.
But after the ECC installation the solution manager java engine is not coming up error with "com.sap.security.core.ume.service failed" error. Prior to the ECC installation the Solution Manager J2EE was working.
thanks in advance
Mathew

error in the /j2ee/cluster/server0/log/defaultTrace.1.trc
is as follows
#1.5#00137256A483001E0000001700006F190004163784D40864#1150327614343#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_61##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
When I looked at using jcmon the dispacher is up and the server0 and SDM is down

BI 7.0 and ECC 6.0 in the same server

Dear experts,
In my company the scenarion is like, we have installed ECC 6.0 in server where development work is going on.
Now we have requirement to implement the BI 7.0 in the same server as already BI content is existing in the same server.
My question is
Is it possible to implement the BI on the same server?
If yes, is it possible to extract the data from the development client on the same server where ECC 6.0 running?
If No, then what is the use of the BI contents in the ECC 6.0 server?
Regards,
SUD

Hi
> it possible to implement the BI on the same server?
Yes, why not? But that will be a separate SAP installation with different SID.
>If yes, is it possible to extract the data from the development client on the same server where ECC 6.0 running?
Yes, that is possible. Both the system will be having different Logical system name. You have to create a source system connection from ur BI to ECC system and then data extraction is possible.
>If No, then what is the use of the BI contents in the ECC 6.0 server?
BI Content in ECC is there to facilitate data extraction from ECC to BI. It would provide you the structure of data extraction. Presence of BI Cont does not mean a ECC system will be working as BI system.
Hope this clarifies your doubt.
Regards
Anindya Bose

BI and ECC 6.0 installation in the same server

Hello SAP Experts,
I am given a task of installing BI 7.0 and ECC 6.0 in the same server. Can someone suggest me of what are all the Do's and Don'ts in this scenario and what is the hardware requirements.
Thanks & Regards
Vanitha

Hi,
For installing BI, you have to install Netweaver.
You already have ECC 6.0 in the System.
As a part of BI system, you will be extracting data from ECC Ssytem and loading in BW System.
Hence if your requireement is like data is loaed in the the BW System every one hour, it will slow down the ECC System.
In future you may need to do some OS patch update, database patch update which is not required in ECC, but it will effect both systems
I have not seen any scenario where OLTP and OLAP System are in the same box
But if you are just doing for learning purpose and you are doing it in your sand box , that should be fine

ECC 6 with BIW on same server?

Hi,
I am installing ECC 6 (ABAP) in one server, now there is a requirement for BW also, in ECC 6 version BW comes with the ERP 2005 CDs, and does SAP recommends to install in same server as well?.
(In ECC 5 I had a separate server for BW, and installed as another SID..can same is possible or along with ERP the BW also suggested)
thanks,
Mathew

Hi Mathew,
Currently, you can only implement SAP ECC/SAP NetWeaver BI on the same server on a project basis. (You'll see this mentioned in the upgrade/installation guides for SAP ECC.) This means that you will need to get approval from SAP to pursue this option. SAP will review your project to determine whether we think you are a good candidate for this approach and monitor your project. Please see SAP Note 855534 for more information on this landscape option.
You can also find more on this in some of the threads on the Integration with mySAP ERP 2004 forum at SAP NetWeaver Technical Integration with ERP
Regards,
Katie Beavers
SAP NetWeaver Product Management

[Help] Move ECC system from one server to another - Considerations

Hi Guys
We currently have two SAP ECC 5.0 Instances over DB2 9.7/AIX 6.1 on a same server (WS01), and now we are splitting this, by leaving Development box on WS01 and moving QA to WS08
What would you think/recommend the best approach to fulfill this requirement
Im taking in mind such things like, transport system, RFC connections, Database and SAP Profiles
What steps would you think are mandatory to have QA system fully working on a brand new server
Is an option to install an system from scratch on that new server (WS08), and they restore the actual database and perform the post processing steps just like a refresh, and then adding that system to the actual ECC landscape
Best Regards
Martin

> We currently have two SAP ECC 5.0 Instances over DB2 9.7/AIX 6.1 on a same server (WS01), and now we are splitting this, by leaving Development box on WS01 and moving QA to WS08
>
> What would you think/recommend the best approach to fulfill this requirement
>
> Im taking in mind such things like, transport system, RFC connections, Database and SAP Profiles
>
> What steps would you think are mandatory to have QA system fully working on a brand new server
This process is called "system copy".
> Is an option to install an system from scratch on that new server (WS08), and they restore the actual database and perform the post processing steps just like a refresh, and then adding that system to the actual ECC landscape
It's an option but not necessary to first install a full featured system and then "overwrite" the database.
You can install a new system using the database backup of the original system.
http://service.sap.com/instguides
Markus

Forward to different web-app on same server

I can forward a request from a servlet to another web-app on same server, but the authenticated principal is not propagated from original servlet to forwarded servlet. I'm using the requestDispatcher.forward(req,resp) method. It seems that if you forward to a web-app within same EAR or server than the user's identifty should be propagated.

With tomcat you can use single sign on .
http://jakarta.apache.org/tomcat/tomcat-5.0-doc/config/host.html#Single%20Sign%20On
regards Dietmar

Error while uninstalling and then re installing sharepoint 2013 on same server(windows server 2012)

Hi All,
I have installed SharePoint 2013 prerequisites successfully on windows server 2012. While installing SharePoint 2013, system struck on for several minutes. I have restart my system manually. Later I then installed prerequisites which showed a successful
lessage. But When I try to install SharePoint 2013. I am getting the following error:
trial editions and lincensed editions of SharePoint, Project Server, and Office Web apps products may not be installed on the same server.
I am unable to find solution for this issue. what is the solution for this?
Thanks in Advance..
Prem Kumar

To be honest, the quickest thing you could do (and what I would do regardless) is re-build the server (re-install Windows).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Move file from App server to same server on different path

Hi All,
I have to move a file from Application server to a folder in the same server....
pls tell me how can i do this....
its very urgent....
Thanks...............

Hi
First you read the file in output mode using Open dataset and Read dataset statement with the initial application server path.
Then write this data back to another file path by opening the file in Input mode and using Transfer statement.
Example.
open dataset <file1> mode output encding default.
if sy-subrc = 0.
do.
read dataset <file1> into wa_itab.
if sy-subrc = 0.
append wa_itab to itab.
else.
exit.
endif.
enddo.
open dataset <file2> mode input encding default.
if sy-subrc = 0.
loop at itab into wa_itab.
transfer wa_itab to <file2>.
endloop.
endif.
~ Ranganath
PS : Reward points for all useful answers !

How can I migrate file shares & permissions from one volume to another on the same server?

I am replacing a storage array and as part of that process, I need to move files/folders and Shares/permissions from one Volume to another volume within the same server.
The server is Windows 2003 file server. The file transfers are not a problem, moving all 40 shares with permissions etc. is my main concern because in order to maintain everything I need to change the drive letter of the new volume to match the old
one so that links to various resources throughout the network do not break.

Hi,
If you want to copy files/folders from one Volume to another volume within the same server, you could use the File Server Migration Tool (FSMT) or Robocopy to accomplish your goals. The tool can move all of the files from the shares on your original volume
to the new volume.
For more detailed information, you could refer to the articles below:
File Server Migration Toolkit
http://technet.microsoft.com/en-us/magazine/2006.10.utilityspotlight.aspx
The File Server Migration Toolkit (FSMT) is a free download available at:
http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=10268
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
FSMT and Robocopy will not copy Share permissions but only NTFS permissions. So if the drive letter will not be changed, you can backup and restore the Share permission with steps here:
Saving and restoring existing Windows shares
http://support.microsoft.com/kb/125996
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Access to different application in same server

Any know an easy way to access the JNDI/EJB of a different application
running in the same server?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services

Only the classfiles of any user-defined classes/interfaces that are possibly used
as parameters or return values from the methods in the home/remote interfaces. If
you aren't doing that, then the home and remote interfaces is all you need.
Bill
Perry Hoekstra wrote:
[email protected] wrote:
Hrm. It's no different from accessing EJB's deployed in the same application
(EAR) except that local calls are no longer possible.
Perry Hoekstra <[email protected]> wrote:
Any know an easy way to access the JNDI/EJB of a different application
running in the same server?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services--
DimitriI should have explained myself better. I was thinking more from a
packaging point of view. Beside the remote and home interfaces of the
called bean, are there any other files necessary to be packaged with the
calling bean ejb.jar?
Perry Hoekstra, MS
E-Commerce Architect
Talent Software Services
[email protected]

Different logon pages for same server.

hi Expert,
I have created two different logon pages with different URL's for the same server, now i can use both the pages to logon in to the system.
what i need to do now is :-
URL "A" users set ="A"
URL "B" users set ="B"
If we have the above two different URL and respective users for those URLs.
Now if i am User from the User set "A" and try to Login by using URL "B".
I am able to login, but i want to restrict.
ie.
users from set ="A" login only by the link URL "A"
users from set ="B" login only by the link URL "B"
Points would be given to helpful answers.
Regards,
Sanjyoti.

Hi Sanjyoti,
I am not sure if this would work, but if time permits then do try this.
User A -- URL A
User B -- URL B
Now make User A a part of Group A, and set conditions in code that Group A can logon only through URL A and User B can logon through URL B.
Then in code check the association user - group and group - url and accordingly allow / disallow the user to go ahead.
This is just a thought.....do tell me if this works.....or if it doesnt then do post the solution you use....
Thanks,
GLM
P.S: PLEASE CLOSE THE THREAD IF THE ISSUE HAS BEEN RESOLVED
Edited by: GLM on Aug 27, 2008 2:08 PM

Activating MS Office 2013 ProPlus via KMS running on the same server

Given: Microsoft Windows Server 2008 R2 Enterprise 64-bit, all the latest security updates applied.
KMS service set up and running, all the recommended updates applied (to handle possible activation issues for Windows 8 etc)
Microsoft Office 2013 Standard deployed on the server mentioned above and on workstations on intranet, volume licensing in effect (proper KMS key for activation of Microsoft Ofice 2013 has been entered).
Problem: I can't activate MS Office 2013 installation running on the same server where KMS service is being run.
There are no entries in KMS event log related to this failure.
Everything was restarted, reinstalled etc several times already (including installing 32-bit and 64-bit versions of the Office).
Output of slmgr.vbs /dlv 2E28138A-847F-42BC-9752-61B03FFF33CD:
Windows Script Host
Software licensing service version: 6.1.7601.17946
Name: Office 15, KMSHostVL edition
Description: Office 15, VOLUME_KMS channel
Activation ID: 2e28138a-847f-42bc-9752-61b03fff33cd
Application ID: 0ff1ce15-a989-xxxx-xxxx-xxxxxxxxxxxx
Extended PID: 55041-00206-234-486666-03-xxxx-xxxx.xxxx-xxxxxxx
Installation ID: 01683679734050124078134659xxxxxxxxxxxxxxxxxxxxxxxxxxx
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxxx
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/05/2015 10:00:12 AM
Key Management Service is enabled on this machine
Current count: 0
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 0
Failed requests received: 0
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 0
Requests with License Status Initial grace period: 0
Requests with License Status License expired or Hardware out of tolerance: 0
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 0
OK
Output of cscript ospp.vbs /dstatus
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
SKU ID: b13afb38-cd79-4ae5-xxxx-xxxxxxxxxxxx
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
LICENSE STATUS: ---OOB_GRACE---
ERROR CODE: 0x4004f00c
ERROR DESCRIPTION: Run the following: cscript ospp.vbs /ddescr:0x4004f00c
Last 5 characters of installed product key: GVGXT
DNS auto-discovery: KMS name not available
Activation Interval: 120 minutes
Renewal Interval: 10080 minutes
KMS host caching: Enabled
---Exiting-----------------------------

Given: Microsoft Windows Server 2008 R2 Enterprise 64-bit, all the latest security updates applied.
KMS service set up and running, all the recommended updates applied (to handle possible activation issues for Windows 8 etc)
Microsoft Office 2013 Standard deployed on the server mentioned above and on workstations on intranet, volume licensing in effect (proper KMS key for activation of Microsoft Ofice 2013 has been entered).
Problem: I can't activate MS Office 2013 installation running on the same server where KMS service is being run.
There are no entries in KMS event log related to this failure.
Everything was restarted, reinstalled etc several times already (including installing 32-bit and 64-bit versions of the Office).
Output of slmgr.vbs /dlv 2E28138A-847F-42BC-9752-61B03FFF33CD:
Windows Script Host
Software licensing service version: 6.1.7601.17946
Name: Office 15, KMSHostVL edition
Description: Office 15, VOLUME_KMS channel
Activation ID: 2e28138a-847f-42bc-9752-61b03fff33cd
Application ID: 0ff1ce15-a989-xxxx-xxxx-xxxxxxxxxxxx
Extended PID: 55041-00206-234-486666-03-xxxx-xxxx.xxxx-xxxxxxx
Installation ID: 01683679734050124078134659xxxxxxxxxxxxxxxxxxxxxxxxxxx
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxxx
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/05/2015 10:00:12 AM
Key Management Service is enabled on this machine
Current count: 0
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 0
Failed requests received: 0
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 0
Requests with License Status Initial grace period: 0
Requests with License Status License expired or Hardware out of tolerance: 0
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 0
OK
Output of cscript ospp.vbs /dstatus
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
SKU ID: b13afb38-cd79-4ae5-xxxx-xxxxxxxxxxxx
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
LICENSE STATUS: ---OOB_GRACE---
ERROR CODE: 0x4004f00c
ERROR DESCRIPTION: Run the following: cscript ospp.vbs /ddescr:0x4004f00c
Last 5 characters of installed product key: GVGXT
DNS auto-discovery: KMS name not available
Activation Interval: 120 minutes
Renewal Interval: 10080 minutes
KMS host caching: Enabled
---Exiting-----------------------------

XI and R/3 Running on the same Server.

Hello Friends!
One year ago I've installed XI on a machine that already had a R/3 instance. Although there were different instances, one for SAP R/3 and one instance for the ABAP part of XI, I couldn't get to connect XI to the R/3, appartently XI searched for the instance through the IP address, ignoring the instance ID parameter.
Now I have again the same challenge, I have only one machine to run R/3 and XI.
Does anyone know if it is possible to do?

Hi Tadeo,
from ERP 2004 you can install XI on the same server.
Regards,
Udo

ECC & PI on same Server

Similar Messages

Maybe you are looking for