ECC slow,its urgent
Hi all
I have ECC 6.0 im ny landscape.I have installed develoment and quality servers on one server of hp which is having 4 gb of ram.my os is HP-UX.now i am facing performance issue,system is very slow and i feel that since both development and quality instances are on one server that is why?
when i see in st02,there are many reds in swaps namely
program buffer and CUA.
the size of program buffer is 350 mb and CUA is 300 kb on both development and quality servers.Please help me as it is urgent
Regards
Praveen
OK, you have 4GB of RAM
If your DB is 500MB it will be slow but not deadly, as you are not MCOD that mean 2 x 500MB DB's.
Equally if you set your shared mempory in each system to be say 800MB in total, you will get it a little slow but OK.
Add 700MB for the OS and you now are using 2.5 GB
Having 2 GW's , 2 ICM's and 2 Dispatchers as well as say 10 WP per instance will give say 1.2 GB of memory and so you are up to 3.7 GB of memory IF you have sized your systems as I suggest... this is without any extended memory and to be honest if ytou have only a few users on these well tuned systems for the memory then you will be over 4GB.
What your problem is likely to be is that you have over allocated in the shared memory and databse areas and I would do the opposite of what everyone else is suggesting and look at dropping the DB sizes and the shared memory sizes.... to be honest though, is far easier and not that expensive to double up on RAM to 8GB and at least have a chance of running as what I have suggested fo rthe best use of 4GB is stoll going to make your system poerform fairly poorly
Similar Messages
-
Its urgent pls help me .
how can i call a portal from webdynpro application
my requirment is
i was created webdynpro application.
in that i was created one view . in that i was created one button (go).
if i click that button i want move some other portal.
how can i acchive pls help me.
its urgent.
pls send any example programe
Message was edited by:
madipadiga nagaraju
Message was edited by:
madipadiga nagarajuhi,
there is no direct tcode for going to webdynpro component/interfaces in ecc 6.0.
but u have se58 in ecc 5.0,as webdynpro convertor.u give ur program name and click web dynpro convertor button then it takes u to se80 .but this wda(webdynpro abap) component comes as in application tree hierarchy .
i can say in wda component refers a class .if u select webdynpro component/interface,it ask u to create a class or interface.
after that it automatically generate component controller(it is also a class),
interface view and windows.all these 3 are classes.for every window one interface view will be created.ie.. window is internal visible where as interface view is external visible.
u create view and embed these views in windows.by going to the window layout,right click on the window name and click embed view.u can enbed as many view as u wish.in order to navigate from one view to other view ,click "create navigation" by right clicking the view plugs.
by default windows and view have inbound plugs.this is literally a event of that class.
if u want to navigate from view1 to view2 ,create outbound plug for view1,the click outbound plug of view1 and right click the click create navigation the select inbound plug of view2.
then create a application .this is simillar of creating an object.
click on this object and test .this will open in browser.
for deploying u have use "sap webdynpro iview". -
hai friends
my reequirement is extracting data from 4.6 c for purchase order me21 into flat file format.(tab delimitter) .currently we are working on ecc 6 version.i had already written bdc code for me21 in ecc6 version for uploading data.
please help me its urgent.
give any sample code for writing extract programHi Friend,
if it help full to u please give me max point.i am sending code.
REPORT ZMXX0295 LINE-SIZE 132 NO STANDARD PAGE HEADING.
+
Comparisom of PIR or Contract price with latest PO price
+
This program was created to compare PIR prices or contract prices
with the latest PO price.
It reads the source lists for the specified materials to determine
the PIR or contract prices. Afterwards it reads the PO history to
get the purchase order prices.
The material to be processed can either be selected from the data
base (material master) or via an PC upload file.
The output can be sorted in different variants.
+
+
*eject
Definition of database tables --------------------------------------+
TABLES: EINA, "Purchasing Info Record: General Data
EINE, "PIR: Purchasing Organization Data
EIPA, "Order Price History, Info Record
EKAB, "Contract Release Documentation
*EKKO, "Contract / PO header
EKKO, "Contract / PO header
*EKPO, "Contract / PO item
EKPO, "Contract / PO item
EORD, "Source list
TCURC. "Currency codes
*eject
Definition of internal tables / data -------------------------------+
DATA: BEGIN OF MAT_PRICE OCCURS 0,
VRTYP LIKE EORD-VRTYP, "Document type
INFNR LIKE EINE-INFNR, "Info record / Contract
MATNR LIKE EINA-MATNR, "Material
WERKS LIKE EINE-WERKS, "Plant
EKORG LIKE EINE-EKORG, "Purch. organization
LIFNR LIKE EINA-LIFNR, "Vendor
FLIFN LIKE EORD-FLIFN, "Fix Vendor
IRPRS LIKE EINE-NETPR, "Info record price
PEINH LIKE EINE-PEINH, "Price unit
EBELN LIKE EIPA-EBELN, "PO header
EBELP LIKE EIPA-EBELP, "PO item
BEDAT LIKE EIPA-BEDAT, "PO date
POPRS LIKE EIPA-LPREI, "PO price
LPEIN LIKE EIPA-LPEIN, "Price unit
MENGE LIKE EKPO-MENGE, "PO quantity
MEINS LIKE EKPO-MEINS, "PO unit of measure
END OF MAT_PRICE.
DATA: BEGIN OF MAT_SEL OCCURS 0,
MATNR LIKE EINA-MATNR,
END OF MAT_SEL.
DATA: T_EORD LIKE EORD OCCURS 0 WITH HEADER LINE.
DATA: CURSORFIELD(15), "Fieldname of Cusor pos
INV_DATE LIKE SY-DATUM, "Inverted date
W_EFFPR LIKE EINE-EFFPR. "Hiwi price
DATA: W_FILE TYPE STRING. "JAN29NOV05
CONSTANTS: C_0(01) TYPE C VALUE '0',
C_F(01) TYPE C VALUE 'F',
C_I(01) TYPE C VALUE 'I',
C_K(01) TYPE C VALUE 'K',
C_X(01) TYPE C VALUE 'X'.
CONSTANTS: C_ASC(10) TYPE C VALUE 'ASC'. "JAN29NOV05
*eject
Definition of selection screen -------------------------------------+
SELECTION-SCREEN BEGIN OF BLOCK B01 WITH FRAME TITLE TEXT-B01.
PARAMETERS: P_DBASE RADIOBUTTON GROUP R01. "Read mat's via select.
SELECT-OPTIONS: S_MATNR FOR EINA-MATNR. "Material
SELECTION-SCREEN ULINE.
PARAMETERS: P_XFILE RADIOBUTTON GROUP R01, "Read mat's via PC file
P_DATEI LIKE RLGRAP-FILENAME. "PC file with MATNR's
SELECTION-SCREEN SKIP.
SELECT-OPTIONS: S_MATKL FOR EINA-MATKL, "Material group
S_WERKS FOR EINE-WERKS, "Plant
S_EKORG FOR EINE-EKORG, "Purch. organization
S_BEDAT FOR EIPA-BEDAT. "PO price date
PARAMETERS: P_WAERS LIKE EINE-WAERS "Output currency
OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B01.
*eject
Process after input ------------------------------------------------+
AT SELECTION-SCREEN ON P_WAERS.
PERFORM READ_TCURC.
AT SELECTION-SCREEN ON P_DATEI.
IF NOT P_XFILE IS INITIAL
AND P_DATEI IS INITIAL.
MESSAGE E999(ZZ) WITH 'Please sepcify PC file name'.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_DATEI.
PERFORM CALL_WS_EXPLORER.
*eject
Start of main program ----------------------------------------------+
START-OF-SELECTION.
IF NOT P_XFILE IS INITIAL.
PERFORM UPLOAD_MATERIAL_SELECTION. "Read mat's from file
IF MAT_SEL[] IS INITIAL.
MESSAGE E999(ZZ) WITH
'No records were found in file'(E01) P_DATEI(40).
ELSE.
PERFORM GET_MATERIAL_SELECTION. "Process upload file
ENDIF.
ENDIF.
PERFORM SOME_REWORK.
PERFORM PROCESS_MATERIALS. "Process mat. selection
END-OF-SELECTION.
End of Main program ------------------------------------------------+
SET PF-STATUS 'LIST'.
SORT MAT_PRICE BY MATNR WERKS EKORG POPRS.
PERFORM AUSGABE.
IF SY-SUBRC EQ 0.
MESSAGE I999(ZZ) WITH TEXT-002.
MESSAGE S999(ZZ) WITH TEXT-001
'Material/Plant/PurchOrg/PO Price'(003).
ENDIF.
*eject
User commands - interactive reporting ...
AT USER-COMMAND.
IF SY-UCOMM EQ 'ORDR'.
PERFORM DISPLAY_ORDER.
ENDIF.
AT LINE-SELECTION.
PERFORM CHANGE_SORT_SEQUENCE.
*eject
+
TOP-OF-PAGE
+
TOP-OF-PAGE.
PERFORM LIST_HEADER.
*eject
+
TOP-OF-PAGE during line-selection.
+
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM LIST_HEADER.
*eject
Form CALL_WS_EXPLORER
FORM CALL_WS_EXPLORER.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = '*.txt,' "JAN29NOV05
DEF_FILENAME = '*.txt' "JAN29NOV05
DEF_PATH = 'D:\'
MASK =
Block Changed From Here JAN29NOV05
'Text files,.txt,Data files,.dat,All files,.,.'(MSK)
' Text files,.txt,Data files,.dat,All files,.,.'(MSK)
Block Changed Till Here JAN29NOV05
MODE = 'O'
TITLE = 'Upload Materials to be processed'(004)
IMPORTING
FILENAME = P_DATEI
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4.
ENDFORM. " CALL_WS_EXPLORER
*eject
Form PROCESS_MATERIALS
Read source list for specified materials and then process
either PIR or contracts.
FORM PROCESS_MATERIALS.
PERFORM READ_MATERIAL_SOURCE_LIST.
LOOP AT T_EORD.
CLEAR W_EFFPR.
TRANSLATE T_EORD-VRTYP USING ' I'. "Set I = Infor record
IF T_EORD-VRTYP EQ C_I.
PERFORM GET_PIR_INFORMATION.
ELSE.
T_EORD-FLIFN = T_EORD-FEBEL.
PERFORM GET_CONTRACT_INFORMATION.
ENDIF.
ENDLOOP.
ENDFORM. " PROCESS_MATERIALS
*eject
Form GET_MATERIAL_SELECTION
FORM GET_MATERIAL_SELECTION.
SORT MAT_SEL.
CLEAR S_MATNR.
S_MATNR-OPTION = 'EQ'.
S_MATNR-SIGN = 'I'.
LOOP AT MAT_SEL WHERE
MATNR CO ' 0123456789'.
SHIFT MAT_SEL-MATNR RIGHT DELETING TRAILING ' '.
TRANSLATE MAT_SEL-MATNR USING ' 0'.
S_MATNR-LOW = MAT_SEL-MATNR.
APPEND S_MATNR.
ENDLOOP.
ENDFORM. " GET_MATERIAL_SELECTION
Form READ_EIPA
FORM READ_EIPA.
SELECT EBELN EBELP BEDAT
INTO CORRESPONDING FIELDS OF EIPA
FROM EIPA
UP TO 1 ROWS
WHERE INFNR EQ EINA-INFNR
AND WERKS EQ T_EORD-WERKS
AND EKORG EQ T_EORD-EKORG
AND BEDAT IN S_BEDAT
ORDER BY BEDAT DESCENDING.
PERFORM READ_ADDITIONAL_PO_DATA
USING EIPA-EBELN EIPA-EBELP.
CHECK SY-SUBRC EQ 0.
PERFORM FILL_MAT_PRICE USING 'X' EINA-INFNR
EINE-EFFPR EINE-PEINH EINE-WAERS.
APPEND MAT_PRICE.
ENDSELECT.
ENDFORM. " READ_EIPA
*eject
Form FILL_MAT_PRICE
FORM FILL_MAT_PRICE USING
*ID X_EBELN X_EFFPR X_PEINH X_WAERS "JAN29NOV05
Block added from here JAN29NOV05
ID TYPE C
X_EBELN TYPE C
X_EFFPR TYPE EINE-EFFPR
X_PEINH TYPE EINE-PEINH
X_WAERS TYPE EINE-WAERS.
Block added till here JAN29NOV05
CLEAR MAT_PRICE.
IF X_WAERS NE P_WAERS.
PERFORM CONVERT_TO_OTHER_CURRENCY USING
X_EFFPR X_WAERS P_WAERS.
ENDIF.
MAT_PRICE-VRTYP = T_EORD-VRTYP. "PIR / Contract no.
MAT_PRICE-INFNR = X_EBELN. "PIR / Contract no.
MAT_PRICE-MATNR = T_EORD-MATNR. "Material
MAT_PRICE-LIFNR = T_EORD-LIFNR. "Vendor
MAT_PRICE-FLIFN = T_EORD-FLIFN. "Fix Vendor
MAT_PRICE-WERKS = T_EORD-WERKS. "Plant
MAT_PRICE-EKORG = T_EORD-EKORG. "Purch. organization
MAT_PRICE-IRPRS = X_EFFPR. "PIR / Contract price
MAT_PRICE-PEINH = X_PEINH. "PIR / Contract pr.unit
CHECK ID NE SPACE. "PO history found ?
latest PO data ...
IF EKKO-WAERS NE P_WAERS.
PERFORM CONVERT_TO_OTHER_CURRENCY USING
EKPO-EFFWR EKKO-WAERS P_WAERS.
ENDIF.
MAT_PRICE-EBELN = EKPO-EBELN. "PO number
MAT_PRICE-EBELP = EKPO-EBELP. "PO item
MAT_PRICE-BEDAT = EKKO-BEDAT. "PO date
IF EKPO-MENGE NE 0.
MAT_PRICE-POPRS = EKPO-EFFWR / ( EKPO-MENGE "Last PO price = value
EKPO-BPUMZ / EKPO-BPUMN ). " / Qty. in sales unit
ELSE.
MAT_PRICE-POPRS = EKPO-EFFWR. "Last PO value
ENDIF. "PO price unit
MAT_PRICE-LPEIN = EKPO-PEINH. "PO price unit
MAT_PRICE-MENGE = EKPO-MENGE. "PO quantity
MAT_PRICE-MEINS = EKPO-MEINS. "PO unit of measure
ENDFORM. " FILL_MAT_PRICE
*eject
Form CONVERT_TO_OTHER_CURRENCY
FORM CONVERT_TO_OTHER_CURRENCY USING
XVALUE FR_CURR TO_CURR. "JAN29NOV05
Block added from here JAN29NOV05
XVALUE TYPE ANY
FR_CURR TYPE EKKO-WAERS
TO_CURR TYPE EINE-WAERS.
Block added till here JAN29NOV05
CALL FUNCTION 'MS_CONVERT_TO_OTHER_CURRENCY'
EXPORTING
DATE = SY-DATUM
FROM_CURRENCY = FR_CURR
FROM_AMOUNT = XVALUE
TO_CURRENCY = TO_CURR
COMPANY_CURRENCY = 'EUR'
IMPORTING
TO_AMOUNT = XVALUE
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC NE 0.
MESSAGE E999(ZZ) WITH 'Currency conversion error from'(E02)
FR_CURR 'to' TO_CURR.
ENDIF.
ENDFORM. " CONVERT_TO_OTHER_CURRENCY
*eject
Form UPLOAD_MATERIAL_SELECTION
FORM UPLOAD_MATERIAL_SELECTION.
Block commented from here JAN29NOV05
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = P_DATEI
FILETYPE = 'DAT'
TABLES
DATA_TAB = MAT_SEL
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
Block commented till here JAN29NOV05
Block added from here JAN29NOV05
MOVE P_DATEI TO W_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = W_FILE
FILETYPE = C_ASC
HAS_FIELD_SEPARATOR = C_X
TABLES
DATA_TAB = MAT_SEL
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
Block added till here JAN29NOV05
IF SY-SUBRC NE 0.
MESSAGE E999(ZZ) WITH 'Error uploading from file'
P_DATEI(40).
ENDIF.
ENDFORM. " UPLOAD_MATERIAL_SELECTION
*eject
Form AUSGABE
FORM AUSGABE.
LOOP AT MAT_PRICE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: /01 MAT_PRICE-VRTYP, "Document type
03 MAT_PRICE-INFNR, "Info record / Contract
14 MAT_PRICE-MATNR, "Material
23 MAT_PRICE-WERKS, "Plant
28 MAT_PRICE-EKORG, "Purch. organization
33 MAT_PRICE-LIFNR, "Vendor
44 MAT_PRICE-FLIFN, "Fixed Vendor
46 MAT_PRICE-IRPRS NO-SIGN, "Info record price
61 MAT_PRICE-PEINH NO-SIGN. "IR price unit
FORMAT COLOR 2 INTENSIFIED.
IF NOT MAT_PRICE-EBELN IS INITIAL.
WRITE: 68 MAT_PRICE-POPRS NO-SIGN, "PO price
83 MAT_PRICE-LPEIN NO-SIGN, "PO price unit
90 MAT_PRICE-MENGE, "PO quantity
107 MAT_PRICE-MEINS, "PO unit of measure
111 MAT_PRICE-EBELN, "PO number
123 MAT_PRICE-BEDAT. "PO date
ELSE.
WRITE: 74 'No PO price was found'(005),
132 ' '.
ENDIF.
HIDE MAT_PRICE-VRTYP.
AT END OF MATNR.
SKIP.
ENDAT.
ENDLOOP.
CLEAR MAT_PRICE.
ENDFORM. " AUSGABE
*eject
Form READ_TCURC
FORM READ_TCURC.
CLEAR TCURC.
TCURC-WAERS = P_WAERS.
READ TABLE TCURC.
IF SY-SUBRC NE 0.
MESSAGE E999(ZZ) WITH P_WAERS 'Currency code invalid'(E03).
ENDIF.
ENDFORM. " READ_TCURC
*eject
Form LIST_HEADER
FORM LIST_HEADER.
FORMAT INTENSIFIED.
WRITE: /01 'Output currency'(006), 25 ': ', P_WAERS,
122 'Page'(007), SY-PAGNO,
/01 'Plant'(008), 25 ': from '(009), S_WERKS-LOW,
46 'to '(010), S_WERKS-HIGH,
/01 'Purchasing Organization'(011),
25 ': from '(009), S_EKORG-LOW,
46 'to '(010), S_EKORG-HIGH,
/01 'PO date'(012), 25 ': from '(009), S_BEDAT-LOW,
46 'to '(010), S_BEDAT-HIGH.
ULINE.
FORMAT COLOR 1.
WRITE: /01 TEXT-T01.
ULINE.
ENDFORM. " LIST_HEADER
*eject
Form CHANGE_SORT_SEQUENCE
FORM CHANGE_SORT_SEQUENCE.
GET CURSOR FIELD CURSORFIELD.
CASE CURSORFIELD+10(5).
WHEN 'EKORG'.
SORT MAT_PRICE BY MATNR EKORG POPRS.
PERFORM AUSGABE.
MESSAGE S999(ZZ) WITH TEXT-001
'Material/Purch.Organization/Info Rec.Price'(013).
WHEN 'BEDAT'.
SORT MAT_PRICE BY MATNR BEDAT POPRS.
PERFORM AUSGABE.
MESSAGE S999(ZZ) WITH TEXT-001
'Material/PO Date/Info Rec.Price'(014).
WHEN 'IRPRS'.
SORT MAT_PRICE BY MATNR IRPRS.
PERFORM AUSGABE.
MESSAGE S999(ZZ) WITH TEXT-001
'Material/Plant/Info Rec.Price'(015).
WHEN 'POPRS'.
SORT MAT_PRICE BY MATNR POPRS.
PERFORM AUSGABE.
MESSAGE S999(ZZ) WITH TEXT-001
'Material/Plant/PO Price'(016).
WHEN 'LIFNR'.
SORT MAT_PRICE BY MATNR LIFNR POPRS.
PERFORM AUSGABE.
MESSAGE S999(ZZ) WITH TEXT-001
'Material/Vendor/PO Price'(017).
WHEN OTHERS.
SORT MAT_PRICE BY MATNR WERKS EKORG POPRS.
PERFORM AUSGABE.
MESSAGE S999(ZZ) WITH TEXT-001
'Material/Plant/PurchOrg/PO Price'(018).
ENDCASE.
SY-LSIND = 0.
ENDFORM. " CHANGE_SORT_SEQUENCE
*eject
Form DISPLAY_ORDER
FORM DISPLAY_ORDER.
DATA: X_BELNR(10) TYPE C.
CLEAR CURSORFIELD.
GET CURSOR FIELD CURSORFIELD.
IF CURSORFIELD+10(5) NE 'EBELN' AND
CURSORFIELD+10(5) NE 'INFNR'.
MESSAGE I999(ZZ) WITH 'Invalid cursor position'.
EXIT.
ENDIF.
GET CURSOR FIELD CURSORFIELD VALUE X_BELNR.
CASE CURSORFIELD+10(5).
WHEN 'EBELN'. "Purchase order
SET PARAMETER ID 'BES' FIELD X_BELNR.
CALL TRANSACTION 'ME23' AND SKIP FIRST SCREEN.
WHEN 'INFNR'. "Info rec. / Contract
IF MAT_PRICE-VRTYP EQ C_I. "Info Record ...
SET PARAMETER ID 'INF' FIELD X_BELNR.
CALL TRANSACTION 'ME13' AND SKIP FIRST SCREEN.
ELSE. "Contract ...
SET PARAMETER ID 'VRT' FIELD X_BELNR.
CALL TRANSACTION 'ME33' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
CLEAR MAT_PRICE.
ENDFORM.
*eject
Form SOME_REWORK
FORM SOME_REWORK.
IF NOT S_BEDAT-LOW IS INITIAL AND "Align date for output
S_BEDAT-HIGH IS INITIAL.
S_BEDAT-HIGH = S_BEDAT-LOW.
MODIFY S_BEDAT INDEX 1.
ENDIF.
CONVERT DATE SY-DATUM INTO INVERTED-DATE "today's inverted date
INV_DATE.
ENDFORM. " SOME_REWORK
*eject
Form READ_ADDITIONAL_PO_DATA
FORM READ_ADDITIONAL_PO_DATA USING
X_EBELN X_EBELP. "JAN29NOV05
Block added from here JAN29NOV05
X_EBELN TYPE EIPA-EBELN
X_EBELP TYPE EIPA-EBELP.
Block added till here JAN29NOV05
SELECT SINGLE WAERS BEDAT
INTO CORRESPONDING FIELDS OF EKKO
FROM EKKO
WHERE EBELN EQ X_EBELN.
SELECT SINGLE EBELN EBELP MENGE MEINS
PEINH EFFWR BPUMZ BPUMN
INTO CORRESPONDING FIELDS OF EKPO
FROM EKPO
WHERE EBELN EQ X_EBELN
AND EBELP EQ X_EBELP
AND LOEKZ NE 'L'.
ENDFORM. " READ_ADDITIONAL_PO_DATA
*eject
Form READ_MATERIAL_SOURCE_LIST
Read source list entries for specified materials
FORM READ_MATERIAL_SOURCE_LIST.
SELECT * INTO CORRESPONDING FIELDS OF TABLE T_EORD
FROM EORD
WHERE MATNR IN S_MATNR
AND WERKS IN S_WERKS
AND EKORG IN S_EKORG
AND VDATU LE SY-DATUM
AND BDATU GE SY-DATUM
AND ( VRTYP EQ SPACE
OR VRTYP EQ C_K ).
IF SY-SUBRC NE 0 OR
T_EORD[] IS INITIAL.
MESSAGE S999(ZZ) WITH 'No data found for this selection'(S01).
ENDIF.
ENDFORM. " READ_MATERIAL_SOURCE_LIST
*eject
Form GET_PIR_INFORMATION
Process purchase info records --> purchase order history
FORM GET_PIR_INFORMATION.
SELECT INFNR
INTO EINA-INFNR
FROM EINA
WHERE LIFNR EQ T_EORD-LIFNR
AND MATNR EQ T_EORD-MATNR
AND MATKL IN S_MATKL
AND LOEKZ EQ SPACE.
SELECT SINGLE EFFPR PEINH WAERS
INTO CORRESPONDING FIELDS OF EINE
FROM EINE
WHERE INFNR EQ EINA-INFNR
AND EKORG EQ T_EORD-EKORG
AND ESOKZ EQ C_0
AND WERKS EQ T_EORD-WERKS
AND LOEKZ EQ SPACE.
CHECK SY-SUBRC EQ 0.
PERFORM READ_EIPA. "Read PO history
IF SY-SUBRC NE 0.
PERFORM FILL_MAT_PRICE USING ' ' EINA-INFNR
EINE-EFFPR EINE-PEINH EINE-WAERS.
APPEND MAT_PRICE.
ENDIF.
ENDSELECT.
ENDFORM. " GET_PIR_INFORMATION
*eject
Form GET_CONTRACT_INFORMATION
text
FORM GET_CONTRACT_INFORMATION.
SELECT SINGLE WAERS
INTO *EKKO-WAERS
FROM EKKO
WHERE EBELN EQ T_EORD-EBELN
AND LOEKZ EQ SPACE.
SELECT SINGLE EBELN EBELP EFFWR PEINH
KTMNG BPUMZ BPUMN
INTO CORRESPONDING FIELDS OF *EKPO
FROM EKPO
WHERE EBELN EQ T_EORD-EBELN
AND EBELP EQ T_EORD-EBELP
AND LOEKZ EQ SPACE.
CHECK SY-SUBRC EQ 0.
Get effective price in sales unit ...
IF *EKPO-KTMNG EQ 0 OR
*EKPO-BPUMN EQ 0.
W_EFFPR = *EKPO-EFFWR.
ELSE.
W_EFFPR = *EKPO-EFFWR / *EKPO-KTMNG
*EKPO-BPUMZ / *EKPO-BPUMN.
ENDIF.
PERFORM READ_EKAB.
IF SY-SUBRC NE 0.
PERFORM FILL_MAT_PRICE USING ' ' *EKPO-EBELN
W_EFFPR *EKPO-PEINH *EKKO-WAERS.
APPEND MAT_PRICE.
ENDIF.
ENDFORM. " GET_CONTRACT_INFORMATION
*eject
Form READ_EKAB
Read released document (PO's) of contract
FORM READ_EKAB.
SELECT EBELN EBELP BEDAT
INTO CORRESPONDING FIELDS OF EKAB
FROM EKAB
UP TO 1 ROWS
WHERE KONNR EQ T_EORD-EBELN
AND KTPNR EQ T_EORD-EBELP
AND WERKS EQ T_EORD-WERKS
AND EKORG EQ T_EORD-EKORG
AND BEDAT IN S_BEDAT
AND BSTYP EQ C_F
ORDER BY BEDAT DESCENDING.
PERFORM READ_ADDITIONAL_PO_DATA
USING EKAB-EBELN EKAB-EBELP.
CHECK SY-SUBRC EQ 0.
PERFORM FILL_MAT_PRICE USING 'X' T_EORD-EBELN
W_EFFPR *EKPO-PEINH *EKKO-WAERS.
APPEND MAT_PRICE.
ENDSELECT.
ENDFORM. " READ_EKAB -
Its urgent:plz tel me what is the steps move to produection oaf page.
Hi All,
I developed one oaf page.that page move to production.
i already move to produection but its not working fine.
its throw an error.
plz tell me what is the steps follow when move to production.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_NO_REGION_DATA. Tokens: REGIONCODE = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG;
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:529)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
at oracle.adf.mds.MElement.findElement(MElement.java:97)
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
at oracle.adf.mds.MElement.findElement(MElement.java:97)
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._RF._jspService(_RF.java:102)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
thanks
Seshu.
Edited by: its urgent on Feb 8, 2012 2:31 AMDeployement steps:
1) Copy the Class files and move to into server
We can get class file >>F:\OAF\jdevhome\jdev\myclasses\imp
\myprojects
(imp) Load into server (java TOP) >>D:\oracle\viscomn\java\
2) Run the XML import Scripts in Command Prompt
F:\OAF\jdevbin\jdev\bin
For every Page and every Lov region
3) Next Go to apps
System administrator Create Function for a page
Description tab:
Function Name : IMP_STUDENT_REGISTRATION
User Function Name: Imp Student Registration
Description : Imp Student Registration
Properties Tab:
Type: SSWA JSP function
WebHTML Tab
Function:
HTML call: OA.jsp?page=/imp/oracle/apps/po/student/webui/ImpStudentResitrationPG
Note: DO the same for all the pages
4) Attach these Functions to Imp Student Operations menu to Imp Student Operations responsibility to User.
5) Bounce the apache.
Regards
Meher Irk -
PLZ ITS URGENT!!!!!!!!!!
hi i developed a smartforms......
in it i am using 'SSF_OPEN' and 'SSF_CLOSE' functions to suppress the print preview box which was coming again n again.....
firstly it was working properly bt i made some changes in my smartforms and then it started giving me the problem n giving the error after executing'Previous Output Request was not finished'...
plz help me out how to solve this problem....
PLZ ITS URGENT!!!!!!!!!!!!!!!!!
plz tell me anyone...........
Edited by: Pardeep Sharma on Dec 24, 2007 11:38 AM
Edited by: Pardeep Sharma on Dec 24, 2007 11:57 AM
Edited by: Pardeep Sharma on Dec 24, 2007 12:12 PMHi,
Is the requirement to supress the print preview or the dailog box containing the parameters for the print?
Regards,
Kk -
How to Fix the row in sap script, its urgent......
Hi Experts,
first i explain my sap script, i have print void check in my script client give readymade format means box are there, lines are there. i have to fix in box and line data form database table. everthing is working fine. i got all data. i have total 6 window in my script .but i have one issue In my sap script in header window total five rows... like below
Check voucher no:8888
check No: 1234
Date:1/28/2007
Bank:xyz
Batch no: 5678
now sometime check voucher is balnk....
Check voucher no: BLANK/NULL
check No: 1234
Date:1/28/2007
Bank:xyz
Batch no: 5678
because of that all rows are move up side and all window also move up side and so script not fix to the box and line all data are seen not perfectly... so guru`s how to fix the row and window in script....
its urgent...
Waiting for ur reply
Thanks & regards
JigarHi,
Follow the below steps . Definately your issue will bve resolved.
Let us suppose you are printing following fields
PH &v_text&
PH &v_text1&
PH &v_text2&
you will get the output as you expected.
and if you have any conditions for these fileds
/: if v_text is not initial.
PH &v_text&
/: endif
PH &v_text1&
PH &v_text2&
if you have data in each field then you will get output as expected .
But when v_text is initial.
the data will be moved up wnhich is happening in your case.
so what you need to do is?
/: if v_text is not initial.
PH &v_text&
/: else
PH (Here you need to mention empty line with same paragraph format
/: endif.
PH &v_text1&
PH &v_text2&
Reward points if useful
Regards,
Nageswar -
Hi All how to add new payscale for an employee in sap hr-abap,its urgent
Hi All ,
how to add new payscale for an employee in sap hr-abap,its urgent.
Message was edited by:
bharat kumar
Message was edited by:
bharat kumarHi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji -
Hi All,Please send me abap-hr material .Its urgent please.
Hi All,Please send me abap-hr material .Its urgent please.
These are the FAQ's that might helps you
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.sapgenie.com/sapfunc/index.htm
http://www.sap-img.com/abap/sample-hr-reports-allocate-petrol-allowance.htm
http://www.sap-img.com/hr021.htm
http://www.sap-img.com/human/hr-faq.htm
http://www.sap-img.com/human/finding-the-list-of-hr-module-tables.htm
additional info......
Download the ABAP e-book for HR in the below link under the section 'Free ABAP eBook Download'
http://www.sap-img.com
Also have a look at the following links-
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://planetsap.com/index.htm
http://www.atomhr.com/library_full.htm
http://www.sap-basis-abap.com/saphr.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/60/d8d8c7576311d189270000e8322f96/frameset.htm
http://www.sapfriends.com/sapstuff.html
http://www.atomhr.com/know_preview/Reading_Payroll_Results_with_ABAP.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Payroll
http://www.sap-press.com/product.cfm?account=&product=H967
http://www.sapdevelopment.co.uk/hr/payres_abap.htm
http://www.sapdevelopment.co.uk/hr/payres_tcode.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
you can see some Standard Program examples in this one..
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification -
Is it possible to export contacts from Outlook 2011 for Mac and importing this file back into Mac Address Book.? please reply me its urgent
Is it possible to export contacts from Outlook 2011 for Mac and importing this file back into Mac Address Book.? please reply me its urgent
-
Hi All requirement on Purchase Order.Its Urgent
Hi All,
Pls provide me the soure code for the following requirement ASAP. Its urgent.
Program: Z_PO_PRINT_MAIL
Transaction: ZPOP
Purchase order number: (should be a parameter not a select option) (Code the lookup using search help MEKK)
Radio button for: 1. Print Preview
2. Print
3. E-mail
Additional parameters based on above selection:
1. No additional parameters needed
2. Printer (code the F4 to search printers)(default users default printer)
3. E-mail address, cc (should also have same validations as e-mail address)
Description:
On pressing enter, use the Purchase order number to look up vendor number and name and display either to the right or below the purchase order number.
Vendor Number: EKPO-LIFNR
Vendor Name: LFA1-NAME1
1. Print Preview: Use function ME_DISPLAY_PURCHASE_DOCUMENT with 2 parameters only:
I_EBELN = PO Number
I_PREVIEW = X
2. Print: For this we have to do a BDC.Use transaction ME9F. Enter the purchase order number, blank out the rest. Select the first message, hit Message details. Enter a new message via Edit>new Entries. For new entries, you will need to enter NEU for Output type with Medium 1 (Print output). Hit enter. Select the message and click on further data. Set dispatch time to 4. Green arrow back. Select the message and click on Communication method. Enter the Logical destination as the printer, select Print Immediately and Release after output. Green arrow back and save.
3. E-mail: Use the following function modules:
ECP_PO_OTF_CREATE
CONVERT_OTF_2_PDF
SO_NEW_DOCUMENT_ATT_SEND_API1Hi,
You can explore following link for more details;
http://www.sap-basis-abap.com/sapmo017.htm
http://www.erpgenie.com/sap/sapfunc/purchasing.htm
Bye,
Muralidhara -
Maximize Purchase Order -- Error -- Its Urgent!!!!
Hai To All,
Iam customizing Purchase Order Form. There iam adding one button near cancel button. If i maximum purchase order form i got the following error and SAP Application is closed.
The instruction at "0x77fcb333" referenced memory at "0x000c0101". The memeory could not be "written".
Click on OK to terminate the program
Click on CANCEL to debug the program
OK CANCEL
Can anyone help me........... Its Urgent
Regards,
Anitha
Edited by: ani nazir on Mar 27, 2008 11:43 AMHello Petr,
S where i change place also its showing error.
The following code i used to place the button
oItem = PO_Frm.Items.Add("rm", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
oItem.Left = PO_Frm.Items.Item("2").Left + 75 '150 '
oItem.Width = PO_Frm.Items.Item("2").Width '65 'PO_Frm.Items.Item("51").Width
oItem.Height = PO_Frm.Items.Item("2").Height '20 '
oItem.Top = PO_Frm.Items.Item("2").Top + 10 '505 '
oItem.Visible = True
oItem.Enabled = True
Dim d As SAPbouiCOM.Button = oItem.Specific
d.Caption = "RateMaster"
Regards,
Anitha -
hi experts'
i have to generate asset utilization report in webdynpro
inputs for report are some rfcs
i get result from rfcs
i need to float report i used bussinessgraphic object
its not interactive
if i go for tables
how to create tables with drill down inside table
how to set color for each cell of table depending on condition
please help me
its urgent
and send me code n linkHi Vani,
Your requirement has many things
1. How to call RFCs
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#15 [original link is broken]
2. Once you have data, how to work with BusinessGraphics ?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ba2db0e5-0601-0010-9790-e271902f2c38
(This docs contatins all the required info on webDynpro UIElements)
3.Tables
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#46 [original link is broken]
Regards,Anilkumar -
Lsmw issue plz help its urgent
Hi Experts ,
i need to create a LSMW using batch input .
but the requirement is on the basis of conditions my recording need to be changed .
dat means
3127POL09 3127POL09-1 CTR 3127-1003E 100 FUL
3127POL09 3127POL09-2 WBS 3127POL01 60 FUL
for ctr i ill have to post data in screen number 200
and for wbs i ill have to post data in screen number 400 .
can we put some conditions in recording in lsmw ?
i no we can create multiple recording but how can we use them to fullfill my requirement .
plz help its urgent
thanx in advanceHi,
Within LSMW, there is an option to write our own code wherein this code can be incorporated.
This is in the Field Mapping Option...
Just go to the Menu Extras->Layout
and click on the check box Form Routines
Global Data.
Here you can define Global Variables and also perform your ABAP Coding.
Regards,
Balaji. -
How to install adapters in pi 7.0 ex(tibco adapter) its urgent plz help
hi friends
can any one help me how to insatlll the tibco adapter in pi 7.0 its urgent plz help
thanks in advance
bye
rajaHi Raj,
Is your Sender System Tibco If so Use JMS Adapter to get the Data from tibco and Use IDOC Adapter to Post in R3. For this you no need to Install any Adapter in XI System.
Similar discussions ,
XI integration with Tibco
XI Integration with Tibco EMS (Using JMS Adapter)
Regards
Agasthuri Doss -
Eclipse error while debugging ! Its Urgent
Hi All,
I am trying to debug a java project using eclipse 3.1 and i am getting this internal error
Source method signature could not be resolved Error org.eclipse.jdt.debug.ui
org.eclipse.core.runtime.CoreException: Source method signature could not be resolved
at org.eclipse.jdt.internal.debug.ui.actions.ToggleBreakpointAdapter.toggleMethodBreakpoints(ToggleBreakpointAdapter.java:296)
at org.eclipse.jdt.internal.debug.ui.actions.BreakpointLocationVerifierJob.run(BreakpointLocationVerifierJob.java:163)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:66)
I am not able to set Line breakpoints...
Can anybody help me ..Its urgent
Message was edited by:
Ajay_Javahi
an error occurred when eclipse start or debugging
the error is :
!SESSION 2008-05-19 13:47:11.687 -----------------------------------------------
eclipse.buildId=M20071023-1652
java.version=1.5.0_15
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.equinox.app 2008-05-19 13:47:12.578
!MESSAGE Product org.eclipse.sdk.ide could not be found.
!ENTRY org.eclipse.osgi 4 0 2008-05-19 13:47:12.593
!MESSAGE Application error
!STACK 1
java.lang.RuntimeException: No application id has been found.
at org.eclipse.equinox.internal.app.EclipseAppContainer.startDefaultApp(EclipseAppContainer.java:236)
at org.eclipse.equinox.internal.app.EclipseAppContainer.start(EclipseAppContainer.java:98)
at org.eclipse.equinox.internal.app.Activator.addingService(Activator.java:112)
at org.osgi.util.tracker.ServiceTracker$Tracked.trackAdding(ServiceTracker.java:1064)
at org.osgi.util.tracker.ServiceTracker$Tracked.trackInitialServices(ServiceTracker.java:926)
at org.osgi.util.tracker.ServiceTracker.open(ServiceTracker.java:330)
at org.osgi.util.tracker.ServiceTracker.open(ServiceTracker.java:274)
at org.eclipse.equinox.internal.app.Activator.start(Activator.java:54)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl$2.run(BundleContextImpl.java:999)
at java.security.AccessController.doPrivileged(Native Method)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:993)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:974)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:346)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:260)
at org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:400)
at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLazyStarter.java:111)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java:417)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoader.java:189)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findLocalClass(BundleLoader.java:340)
at org.eclipse.osgi.framework.internal.core.SingleSourcePackage.loadClass(SingleSourcePackage.java:37)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java:405)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:369)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:357)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:83)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at org.eclipse.core.internal.runtime.PlatformActivator.startAppContainer(PlatformActivator.java:47)
at org.eclipse.core.internal.runtime.PlatformActivator.start(PlatformActivator.java:32)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl$2.run(BundleContextImpl.java:999)
at java.security.AccessController.doPrivileged(Native Method)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:993)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:974)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:346)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:350)
at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1118)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:634)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:508)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:282)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.dispatchEvent(StartLevelManager.java:468)
at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:195)
at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:297)
!ENTRY org.eclipse.osgi 2 0 2008-05-19 13:47:12.703
!MESSAGE One or more bundles are not resolved because the following root constraints are not resolved:
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.703
!MESSAGE Bundle update@plugins/org.eclipse.help.webapp_3.3.1.v20070823_33x.jar was not resolved.
!SUBENTRY 2 org.eclipse.help.webapp 2 0 2008-05-19 13:47:12.703
!MESSAGE Missing required bundle org.apache.jasper_5.5.17.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.703
!MESSAGE Bundle update@plugins/org.eclipse.equinox.jsp.jasper_1.0.1.R33x_v20070816.jar was not resolved.
!SUBENTRY 2 org.eclipse.equinox.jsp.jasper 2 0 2008-05-19 13:47:12.703
!MESSAGE Missing imported package org.apache.jasper.servlet_0.0.0.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.703
!MESSAGE Bundle update@plugins/org.eclipse.help.base_3.3.1.v20070813_33x.jar was not resolved.
!SUBENTRY 2 org.eclipse.help.base 2 0 2008-05-19 13:47:12.703
!MESSAGE Missing required bundle org.apache.lucene.analysis_[1.9.1,2.0.0).
!ENTRY org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE The following is a complete list of bundles which are not resolved, see the prior log entry for the root cause if it exists:
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE Bundle update@plugins/org.eclipse.sdk_3.3.2.R33x_v20071022/ [20] was not resolved.
!SUBENTRY 2 org.eclipse.sdk 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing required bundle org.eclipse.help.ui_[3.2.0,4.0.0).
!SUBENTRY 2 org.eclipse.sdk 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing required bundle org.eclipse.help.base_[3.1.0,4.0.0).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE Bundle update@plugins/org.eclipse.pde.ui_3.3.1.v20070912-0800.jar [25] was not resolved.
!SUBENTRY 2 org.eclipse.pde.ui 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing imported package org.apache.lucene.demo.html_0.0.0.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE Bundle update@plugins/org.eclipse.equinox.jsp.jasper.registry_1.0.0.v20070607.jar [27] was not resolved.
!SUBENTRY 2 org.eclipse.equinox.jsp.jasper.registry 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing imported package org.eclipse.equinox.jsp.jasper_0.0.0.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE Bundle update@plugins/org.eclipse.equinox.jsp.jasper_1.0.1.R33x_v20070816.jar [32] was not resolved.
!SUBENTRY 2 org.eclipse.equinox.jsp.jasper 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing imported package org.apache.jasper.servlet_0.0.0.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE Bundle update@plugins/org.eclipse.jdt.compiler.tool_1.0.1.v_780_R33x.jar [53] was not resolved.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE Bundle update@plugins/org.eclipse.help.webapp_3.3.1.v20070823_33x.jar [57] was not resolved.
!SUBENTRY 2 org.eclipse.help.webapp 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing required bundle org.eclipse.help.base_[3.1.0,4.0.0).
!SUBENTRY 2 org.eclipse.help.webapp 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing required bundle org.apache.jasper_5.5.17.
!SUBENTRY 2 org.eclipse.help.webapp 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing required bundle org.eclipse.equinox.jsp.jasper.registry_1.0.0.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE Bundle update@plugins/org.eclipse.pde.ui.templates_3.3.0.v20070608-1300.jar [59] was not resolved.
!SUBENTRY 2 org.eclipse.pde.ui.templates 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing required bundle org.eclipse.pde.ui_[3.3.0,4.0.0).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE Bundle update@plugins/org.eclipse.jdt.apt.pluggable.core_1.0.1.R33x_v20070831-0435.jar [76] was not resolved.
!SUBENTRY 2 org.eclipse.jdt.apt.pluggable.core 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing imported package org.eclipse.jdt.internal.compiler.tool_0.0.0.
!SUBENTRY 2 org.eclipse.jdt.apt.pluggable.core 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing imported package org.eclipse.jdt.internal.compiler.apt.dispatch_0.0.0.
!SUBENTRY 2 org.eclipse.jdt.apt.pluggable.core 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing imported package org.eclipse.jdt.internal.compiler.apt.model_0.0.0.
!SUBENTRY 2 org.eclipse.jdt.apt.pluggable.core 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing imported package org.eclipse.jdt.internal.compiler.apt.util_0.0.0.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE Bundle update@plugins/org.eclipse.help.ui_3.3.1.v20070726_33x.jar [86] was not resolved.
!SUBENTRY 2 org.eclipse.help.ui 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing required bundle org.eclipse.help.base_[3.3.0,4.0.0).
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE Bundle update@plugins/org.eclipse.jdt.compiler.apt_1.0.1.R33x_v20070831-0435.jar [129] was not resolved.
!SUBENTRY 2 org.eclipse.jdt.compiler.apt 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing imported package org.eclipse.jdt.internal.compiler.tool_0.0.0.
!SUBENTRY 1 org.eclipse.osgi 2 0 2008-05-19 13:47:12.718
!MESSAGE Bundle update@plugins/org.eclipse.help.base_3.3.1.v20070813_33x.jar [130] was not resolved.
!SUBENTRY 2 org.eclipse.help.base 2 0 2008-05-19 13:47:12.718
!MESSAGE Missing required bundle org.apache.lucene.analysis_[1.9.1,2.0.0).
Maybe you are looking for
-
I need help with an error message
Has anyone run across this error java.lang.class cast exception ? I dont know what caused it and how to fix it. It also seems to be killing my battery life. Any suggestions? Thanks
-
I have just installed Raceview by NASCAR and it requires Firefox 3.5. Where can i download Firefox 3.5?
-
VAL_FIELD selection to determine RSDRI or MDX query: performance tuning
according to on of the HTG I am working on performance tuning. one of the tip is to try to query base members by using BAS(xxx) in the expension pane of BPC report. I did so and found an interesting issue in one of the COPA report. with income statem
-
This program works as I want it to with one exception: sometimes when resizing the frame, the contained JPanels do not fully cover the frame's BorderLayout center region. If you run the program you'll discover that a light gray area often appears on
-
Epsom Printer won't print / driver problems / rastertoescpII issues
Basically, I can no longer print from my iMac to my Epsom Stylus Photo RX640, even though the scanner on the same all-in-one printer works fine. I know there have been a few posts on this print problem issue (an error message reading " /Library/Print