ECC System Refresh - impacts IDOC connections to PI

All,
Whenever we refresh ECC QA system with prod, we have to do all the ale/IDOC settings all over again in ECC QA to connect to QA PI.
Can you please list the tables that are used for We20, We21, BD64, SM59 so that BASIS can take a backup of these tables before refresh and apply the backup once the system refresh is complete.
Thanks.

Hi Vicky,
Partner profile (WE20) is store in below tables
EDPP1: General partner profile
EDP12: Partner profile outbound, additional data NAST
EDP13: Partner profile outbound
EDP21: Partner profile inbound
regards,
Harish

Similar Messages

Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Connecting multiple ECC Clients on same ECC system to BW system(s)

Hello.
We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about? Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'? Any and all comments are welcome as we have not yet acted on our ideas yet.
Thanks very much for whatever comments you might provide,
Geoff.

We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
No impact on the BW system. The only thing that you will have to take care of is that any process chains which fetch data from this DEV ECC system should not be put on periodic cycle because after disconnecting the ECC system, these would start failing.
Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about?
Again no impact on ECC system. As for the client connected earlier to sandbox system, just clear all the queues in RSA7, LBWQ
Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'?
No its not at all a bad practice

Connectivity between SAP ECC system and SAP BI

Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!

Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan

IDOC Tables with Errors Post System Refresh

Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- Ishan

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

No Idocs were getting generated after the system Refresh

Hello Experts,
Recently my Sand box system has been refreshed with the Development system. (Its a system refresh and hence all the objects were also copied like Development).
After the refresh, we have performed the below activities --
BDLS to change the logical system
Maintained the LS in WE20
Partner Profiles from WE21 with proper settings with respect to the new logical system name. (Sand box).
RFC to myself source system and to the Flat File.
While executing a test load from Flat File the system is not able to generate any IDOCS in the system and failing with
"No Idocs generated; file system
Diagnosis
No IDocs have been created. With file systems as source systems, the IDocs are created in BI. As this did not happen, it is probable that there was a short dump in BI.
I dont see any short dumps in ST22 for this load and also any logs in SM21.
Any idea why the system is not able to generate IDOCS in the system?
We are planning to connect R/3 sandbox to BI sandbox once the Flat file load is running fine.
Thanks for your answers.
Raman

Hi ,
Hi
BD87 Update Idocs manually.
1. When you look in the Monitor screen for the first time on a day you mostly will see some Loads that have yellow traffic lights. When you click on the lowest line of the Load (with the time of Load start) you will get the next popup screen:
2. Here you can click on the "Yes" button. The Load specification window (right side of the screen) will now be filled with data.
3. You can now start the manual processing of the IDocs. You go to the "Details" tabpage of the right window. You right click on the line with the red traffic light stating "Request IDoc : IDoc ready to be transferred to application" on the "Details" tab page of the Load. In the option menu that appears choose the option "Update manually in OLTP" (click it).
4. You will get to the next screen (which is in fact a transaction in the source system (SAP R/3) where you can update the IDoc that is send by the source system)
5. Now click the "Excecute" button on the left of the screen (or press the F8 button on your keyboard). You will get to the next screen:
6. This states that the IDoc has been passed through to BW. You return to BW by clicking the "Back" button (or pressing the F3 button on your keyboard) twice. After the first time you will see the previous screen and after that the Monitor screen again.
7. You will now see that the Status of the Load has turned to yellow or green. When it is yellow you will have to wait a little time (the execution of the Load in BW is still running) and by clicking "Refresh Details" button on the left upper side of the screen (or pressing the F8 button on your keyboard) you will see the Load turn green.
Regards,
Rahul.

** Not able to import IDoc from SAP ECC system

Hi Friends,
I am not able to import the IDoc from SAP ECC system in IR. I have checked that, hostname, client, server no. everthing is correct. I checked in SLD also. Host Name is correct.
While import (after giving the user name and password), I am getting the following error.
Problems to reach R3 System
What could be the probelm ?
Kindly help me friends.
Thanking you.
Kind regards,
Jegathees P.

Hi,
Just counter check following step
1. Go to SWCV definition tab select radio button for Import of RFC....
2. In Connection Data for Import from SAP System maintain correct System and correct Client.
3. Make sure you maitain ECC system in Central SLD.
4. In Import Screen check at the top of the screen have SAP System, is that system from where you want to import the IDOC.
With Regards
Sunil

ECC 6 system refresh

Hi all
I am trying to do the system refresh of ECC 6 for the first time. The database part is done and database is up and running but the CI dies after sometime stating that the J2EE status info unavilable.
When I dig deep in it it feels like something is wrong with the SAPUSER table in the database thats having the sapecc user and the password for it. I did the R3TRANS -X and it created the log file that tells me that its not able to connect to the database.
Can anyone tell me the correct way to do the system refresh or how can I rectify this issue now.
Thanks in advance.

I am trying to do the system refresh since the last 5 days and I am not able to do it. Here is what I did last night:
1) I restored the backup of the target server and make sure that everything is working the way its supposed to work before the refresh.
2) I exported SAPUSER table and other users who are database owners.
3) I refreshed the database of the target server with source server.
4) Bring up the Oracle database.
5) Imported the users and tables.
6) Now I dont see problem with the SAPUSER table but still I am not able to start the CI. When I execute the R3trans -X following is the log file generated. I am running ECC 6 with Oracle 10 G with ABAP and Java.
Thanks for all your help.
4 ETW000 r3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 11.03.2007 - 15:52:03
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Sun Mar 11 15:52:05 2007                                  0.000000
4 ETW000 [dev trc     ,00000] db_con_init called                                        0.000000
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                                 0.000000
4 ETW000 [dev trc     ,00000] Loading DB library 'dboraslib.dll' ...                    0.000000
4 ETW000 [dev trc     ,00000] load shared library (dboraslib.dll), hdl 0          5068 0.005068
4 ETW000 [dev trc     ,00000]      using "E:\usr\sap\ECX\SYS\exe\uc\NTAMD64\dboraslib.dll"
4 ETW000                                                                              35 0.005103
4 ETW000 [dev trc     ,00000] Library 'dboraslib.dll' loaded                        11 0.005114
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000                                                                              17 0.005131
4 ETW000 [dev trc     ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.73)
4 ETW000                                                                              93 0.005224
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000                                                                              15 0.005239
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000                                                                              24 0.005263
4 ETW000 [dev trc     ,00000] New connection 0 created                              17 0.005280
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              29 0.005309
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         15 0.005324
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              14 0.005338
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              19 0.005357
4 ETW000 [dev trc     ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000                        DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000                          assuming using instant client with unspecified location.
4 ETW000                                                                             198 0.005555
4 ETW000 [dev trc     ,00000] Oracle Client Version: '10.2.0.1.0'                 6567 0.012122
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         26 0.012148
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8          2394 0.014542
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPECC's password           30 0.014572
4 ETW000 [dev trc     ,00000] Connecting as /@ECX on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000                                                                              20 0.014592
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              19 0.014611
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0000000005524090 0000000004FB41C0 0000000004FB9988
4 ETW000                                                                             111 0.014722
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       18 0.014740
4 ETW000 [dev trc     ,00000] Allocating server context handle                      14 0.014754
4 ETW000 [dev trc     ,00000] Attaching to DB Server ECX (con_hdl=0,svchp=0000000004FB9848,svrhp=00000000055430E8)
4 ETW000                                                                              38 0.014792
4 ETW000 [dev trc     ,00000] Sun Mar 11 15:52:06 2007                           19562 0.034354
4 ETW000 [dev trc     ,00000] Assigning server context 00000000055430E8 to service context 0000000004FB9848
4 ETW000                                                                              27 0.034381
4 ETW000 [dev trc     ,00000] Allocating user session handle                        29 0.034410
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0000000004FB9848,srvhp=00000000055430E8,usrhp=0000000004FB49D8)
4 ETW000                                                                              26 0.034436
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1045
4 ETW000                                                                           46843 0.081279
4 ETW000 [dev trc     ,00000] server_detach(con_hdl=0,stale=1,svrhp=00000000055430E8)
4 ETW000                                                                              17 0.081296
4 ETW000 [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=0000000004FB9848,srvhp=00000000055430E8)
4 ETW000                                                                              17 0.081313
4 ETW000 [dev trc     ,00000] Deallocating server context handle 00000000055430E8
4 ETW000                                                                             415 0.081728
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1045'
4 ETW000                                                                              26 0.081754
4 ETW000 [dev trc     ,00000] Try to connect with default password                  68 0.081822
4 ETW000 [dev trc     ,00000] Connecting as SAPECC/<pwd>@ECX on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000                                                                              16 0.081838
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              18 0.081856
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0000000005524090 0000000004FB41C0 0000000004FB9988
4 ETW000                                                                              21 0.081877
4 ETW000 [dev trc     ,00000] Allocating server context handle                       9 0.081886
4 ETW000 [dev trc     ,00000] Attaching to DB Server ECX (con_hdl=0,svchp=0000000004FB9848,svrhp=00000000055430E8)
4 ETW000                                                                              29 0.081915
4 ETW000 [dev trc     ,00000] Assigning server context 00000000055430E8 to service context 0000000004FB9848
4 ETW000                                                                           13391 0.095306
4 ETW000 [dev trc     ,00000] Assigning username to user session 0000000004FB49D8
4 ETW000                                                                              21 0.095327
4 ETW000 [dev trc     ,00000] Assigning password to user session 0000000004FB49D8
4 ETW000                                                                              28 0.095355
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0000000004FB9848,srvhp=00000000055430E8,usrhp=0000000004FB49D8)
4 ETW000                                                                              20 0.095375
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000                                                                           20919 0.116294
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              17 0.116311
4 ETW000 [dblink      ,00431] ***LOG BY2=>sql error 1017   performing CON [dblink#3 @ 431]
4 ETW000                                                                             100 0.116411
4 ETW000 [dblink      ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 431]
4 ETW000                                                                              15 0.116426
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'ECX'"

CALL_FUNCTION_OPEN_ERROR in CRM while trying to connect to ECC system

Hi All,
We are having issues while connecting to ECC system from CRM at specific point of time.
It occurred only once yesterday . Since it is a production system, we need to investigate the cause of the issue.
Upon checking the logs, I can see dumps in ST22 stating CALL_FUNCTION_OPEN_ERROR while trying to connect to ECC.
This issue has been faced by multiple users at the same time.
Both CRM and ECC are in the same server . There are no errors in ECC system ,
The error description says
Error opening RFC connection
Error text........... "Group USER not found"
Description.......... "LgIGroupX"
The response time is fine for the system and during the time when the error occurred.
Both the systems are in kernel 720 patch level 416.
There are no errors in dev_rd and dev_ms as well.
The errors in trace file also give information that ECC system cannot be reached.
However our ECC system was available , up and running and there were no issues at that time with ECC.
I have attached the dump, kernel and patch level details , work process trace files and the response times.
Please suggest.
Thanks,
Sowmya.

LB: Hostname or service of the message server unknown#DEST =PUCCLNT220#MSHOST
=puc.apps.eon.com#R3NAME =PUC#GROUP =USER"
disp+work information
kernel release 720
kernel make variant 720_EXT_REL
compiled on Linux GNU SLES-11 x86_64 cc4.3.4 use-pr121116 for linuxx86_64
compiled for 64 BIT
compilation mode UNICODE
compile time Feb 16 2013 02:50:12
update level 0
patch number 416
source id 0.416
Error from work process trace file
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
M
M Mon Apr 20 15:48:09 2015
M ThPlgTimeout: ThPlgTimeout for plugin T144/U17974
A
A Mon Apr 20 15:58:59 2015
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c    9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
A
A Mon Apr 20 15:59:02 2015
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c    9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c    9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c    9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1

Crystal Report connecting Multple ECC systems

Hi,
I am working on crystal where I compare the data between to two diffrent databases(ECC tables). I am using SAP Table, function mudule option to create connection.
I have built a main report against ECC system A and imported a sub report built on ECC system B. Now I see that connection in my main report is overwrting the connection in the sub report. If I change the connection in the subreport with set data source location it changes the connection of both sub report and main report. After I deploy this report to infoview, in cmc I see only one database connection.
Is this a bug or can we have only one connection to ECC system per one crystal report even if it has sub reports?
Thanks

Yes that happens automatically, I just checked the same logic with universes built against oracle data source, I could see two coonections in the CMC. Its like its there is this issue when I am connecting to sap tables directly

MDM to Multiple ECC System connection using PI

Hello experts,
My scenarios is to Send Customer and vendor records from MDM system to multiple system. In First release we are sending data to two SAP ECC systems. So we are using File to IDoc.
Please help in the right architecture design as source is same but target are different and couple of field value in IDOC depends on target system. So do I need to do two complete scenarios - Separate Mapping, sender agreement, receiver determinations, interface determinations, communication channels etc or I can re-use some parts. If so how shall I approach with 1 source file to two target files with different values.
Thanks!
Regards,
Ahmed

So we are using File to IDoc.
Please help in the right architecture design as source is same but target are different
and couple of field value in IDOC depends on target system. So do I need to do two complete
scenarios -
Separate Mapping, sender agreement, receiver determinations, interface determinations, communication channels etc or I can re-use some parts.
If so how shall I approach with 1 source file to two target files with different values.
if two target structure are different
esr:
one source service interface(a)
two target service interfaces (b,c)
2 operation mappings(ab),(ac)and 2 message mappings (ab),(ac)
id:
in receiver determination , you have to define 2 receivers and sending data by using xpath condition.
need to create 2 receivers communication channels
need to create 2 Receiver agreemnets(because we need to use 2 target service interfaces for different structures)
need to create 1 interface determination.
thanks,

IDOC with extension from external ECC system

Hello experts.
I have a scenario where I need to receive an IDOC with extenstion from an external system.
how can I define the xsd of that IDOC in my PI system?
will I need to receive an xsd file from the external system and import it as an external defenition?
how is it done? (this 3rd party doesn't have a PI system, so they can't export XSD like me)
another option is to build a similar IDOC with extenstion in our SLD, and import it into the PI system... but it seems a bit problematic.
I'll be happy to hear suggestions from people who had to implement a similar scenario.
thanks,
Imanuel Rahamim.

Hi,
Three questions:
1. how your external system will send to you the data: by an Idoc-XML file ? or by directly an IDoc (so with an ALE config) ?
if it's ALE config, then you should have also a connexion to this Ext. ECC system, for instance to return back an acknowledgment. And so, if you have a connexion, you can import this IDoc into PI.
If it's a file, they have to provide to you an XSD file, that you can use as External Def, and create a Service Interface. So it will be not really like an IDoc, but like all other message which look like an idoc.
2. with this ext. ECC system, do you have a logon connexion ?
if yes, you can import this IDoc into PI.
3. Do you have to send the same IDoc to your own ECC system ?
if yes, that means the extension has to be developped in also in your own ECC. In that case, you will be able to import it PI and use it for source and target.
> how is it done? (this 3rd party doesn't have a PI system, so they can't export XSD like me)
you can find on SDN, some program to generate an XSD from a DDIC table/structure, but for complete IDoc, I don't know.
Anyway, if it's really an ECC system, the better way to exchange data, it's to do an ALE config from their system to your PI, and no issue to import the IDoc def in PI.
regards.
Mickael

'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies

Dear Experts
I am currently facing an issue when I want to connected multiple PI instances to one ECC client for
ABAP Proxy purposes.
In transaction 'SPROXY', in the Enterprise Service Brower, only one PI instance is shown and accessable.
Can this setting be changed to allow multiple PI systems in this Enterprise Service Browser?
Thanks for your ideas.
Mathias

Hi,
Check these replies.
R/3 connected to multiple XI instances
'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies
Multiple XI Instances
Multiple XI instances or multiple app server
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 4, 2008 11:43 AM

2 clients of 1 apo system connecting to 2 clients in same ECC system

Hi
We have a requirement at our end as below-
1)We have 2 clients in our APO Developement system and they are using BW functionality of APO
2)These 2 clients need to talk to 2 different client in our ECC System for ex:- APD has 2 clients(100 & 200) and ECC has two clients(101 and 201).
We need APD 100 to talk to ECC client 101 and APD client 200 talking to ECC client 201.
The query is - Is this possible to do the same .
If yes,can anyone guide me with some required documents

Hi sunny
One more query :-
The scenario is we want to connect 2 APO systems to 2 different clients of same ECC box
For Ex:-
ECC 100 ---> APD100
ECC 200 ---> APT200
There is only 1 ECC box with 2 clients.
I am not sure if we have some restrictions with regards to BW of APO connecting to 1 ECC box.
Do you have any idea if there are some issues while doing it as we will have 2 APO-BW client talking to 2 clients in ECC
Thanksbasisadmin

Connect two ECC systems with one SAP CRM 7.0

Hi Gurus!
I have to do a customizing for connect two ECC 6.0 and one SAP CRM 7.0, only I need the organizational structure from both systems and they need update when the structure from CRM has changes. The business partner goes to ECCs system by PI interfaces.
Both organization models are different, so I have to maintain and update depending the changes in the business.
But I don't know if this is possible, I don't know if we can do this by Middleware, ALE or PI.
Can you please, give your oppinion about this topic?
Best regards,
Eugenia.-

Hi Eugenia,
Please see note 1084315 which descriibes the the multiple backend scenario.
This should be relevant here.
Best regards
Christophe

ECC System Refresh - impacts IDOC connections to PI

Similar Messages

Maybe you are looking for