ECC6 EHP2 (ABAP+Java) system copy using file system copy

Hello Experts,
I have a question around system copy method for a dual stack ECC6 EHP2 system.
We are planning to take full file system backup of this entire ECC6 EHP2 dual stack system and throw it on a completely new hardware with new host name but same SID. We are also planning to do a host renaming in instance profiles and re-building the control files in target system after we finish the file system restore.
Is this method supported in SAP ? Or we strictly have to use SAPinst to do export and import method. In any case our source and target platform is not going to chance as per our scenario.
Any suggestions will be greatly appreciated.
Thanks,
Harshal

> Thanks for the quick response. Is their any document that says it is not supported ? Because of no proper document that says no to do it, client want's to try it out.
For the ABAP part this is certainly feasible.
The Java part has not only issues with the secure store but also with SID and hostname. The old values are stored in many places in the database and in, depending on the applications installed, many .properties files in the filesystem. So it would be not enough to somehow regenerate the secure store but also change hostname and SID in different places that are not really all documented.
What you are basically looking for is
Note 757692 - Changing the hostname for J2EE Engine 6.40/7.0 installation
with the significant sentence
This note should be applied only when the hostname of a machine
where the j2ee engine was already installed has changed.
It does not replace the SAP official system copy procedure and
MUST NOT be used for copying of an instance to another host and/or with different SID.
Markus

Similar Messages

Is database using File system, RAW devices or ASM?

Hi there
Is is possible to find out if the database is using File system, RAW devices or ASM for storage?
I think for ASM, we can tell by querying the V$DATAFILE view if it has ' DATA ' or something like that (a name that has ' ' prefixed to it). Is this the only way? How about other sotrage types (RAW and Filesystem)?
Thanks in advance!

user12033597 wrote:
I think for ASM, we can tell by querying the V$DATAFILE view if it has ' DATA ' or something like that (a name that has ' ' prefixed to it). Is this the only way? How about other sotrage types (RAW and Filesystem)?V$DATAFILE or DBA_DATA_FILE
Raw depends on your OS - in *nix, likely something like /dev/sdc1
ASM depends on ASM and will include + and will follow an ASM pattern, such as described http://docs.oracle.com/cd/B19306_01/server.102/b14200/clauses004.htm
File depends on OS - in *nix, likely start with a '/' and NOT be in /dev or /proc. In Winders start with C:\ or some other disk path.
Nicely discussed in the docs in the Administrators Guide found at http://tahiti.oracle.com

Migration using File System Utility

Dear Hyperion Experts
We have EPM foundation services installed on a stand alone Development Enviroment.
We have to migrate the application to another instance. I am looking for suggestions on suitable strategy to achieve this objective essentially using file system deployment.
What all components would we require to move to the new instance.

Hi,
You didn't need to try and reconfigure, it is possible to try and recover the ldap database, though it had to work in the first place to recover it.
I am not sure of the state of your environment so it may be that you have to drop the database and start again, it is not easy to diagnose the problem from the information given.
Cheers
John
http://john-goodwin.blogspot.con/

TS1363 When I sync my ipod all goes well until I try to eject then it says that other systems are using files on the ipod. Nothing else is running and when I physically eject the ipod hasnt synched....ideas anyone?!

When I sync my ipod all goes well until I try to eject then it says that other systems are using files on the ipod.
Nothing else is running.
The only way I can eject is to do so manually, when I do I then find the ipod hasnt synched.
Any ideas?

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Problem with the EFI system partition's file system.

I installed latest yosemite 10.10.2 update - did a verify disk on “WDC WD1001FALS-403AA0 Media” (internal HD on my iMac 21.5-inch, Mid 2011) and got
Problems were found with the partition map which might prevent booting
Error: The partition map needs to be repaired because there’s a problem with the EFI system partition’s file system.
However a verify disk on the volume partition gets a clean bill of health!
I haven't done a 'repair disk' yet. Thought I'd check if anybody else has same message first.
Cheers

I had issues where my MacPro 8-core would not boot after the 10.7.4 upgrade, but my MacBook Air 13" 2011 upgrade worked just fine.
I had to restore my MacPro HD from my TimeMachine back up. Apparently, the Softraid raid drivers that I use on my MacPro are not compatible yet with 10.7.4. See here for more info:
http://macperformanceguide.com/blog/2012/20120511_1-MacOSX-SoftRAID.html
I contacted Softraid and they are already aware of the issues and are working with Apple for a fix.
Cheers.
Bud

MacBookPro SSD Error- ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.

MacBook Pro OS x Mavericks. I have Sandisk 256GB SSD and I am getting a below error message.
ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
Does anyone know how to resolve this error and fix it ? unfortunately I don't have a Time Machine backup. Thanks!

Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.

How adutilities comes to know that the file system is shared file system

How adutilities comes to know that the file system is shared file system ?
In multinode shared file system : if we want genearte message file we can invoke adadmin from any node and perform this activity. In this case, how adadmin knows that the filesystem is shared filesystem.

Duplicate post.
How adutilities comes to know that the file system is shared file system
How adutilities comes to know that the file system is shared file system

SAPINST: install IDES ECC6 EHP4 ABAP+JAVA (Windows 32 - Oracle)

Hi,
I have received the new IDES ECC6 EHP4 DVDs and I nedd to install a ABAP+JAVA instance.
It is not clear which option I have to choose in the SAPINST program.
In the past was present ERP2005 central instance. And now ?
Thank
Andrea

Hi Andrea,
As of SAP ERP 6.0 SR3, you must install an SAP ERP system only on 64-bit operating
systems.
For the dialog instance, you can still use a 32-bit operating system
As of SAP enhancement package 4 for SAP ERP 6.0, you can no longer install SAP
ERP dual stack (ABAP+Java) systems. If you want to use both SAP ERP ABAP and
Java Components in your system landscape, you have to proceed as follows:
1. Install a separate SAP ERP ABAP system.
2. Install a separate SAP ERP Java system.
3. Configure the connection of the SAP ERP Java system to the SAP ERP ABAP
back-end system
Hope this clarifies your concern!!!
Regards,
Rajesh

Problems in Dialog instance installation for ECC6.0(ABAP+JAVA)

Does anyone can help me what should be a procedure of installing Dialog instance for ECC 6.0 with both ABAP + Java Stacks.
When installing app server do we also choose ABAP and Java or just ABAP. Installation manual does not cover this and when we run the sapinst we have following problem:
The following are the activities that I have done as pre-reqs on the standby on the server that is to host dialog instance
I have mounted the following file systems on ddrsap02. Created the local filesystem /usr/sap/DSP/D00 and NFS mounted the others
/dev/appsaph 5505024 5503856 1% 5 1% /usr/sap/DSP/D00 (is this required or SAPINST should create it itself)
ddrsap00:/stage 419430400 149761708 65% 90835 1% /stage
dprsap01:/sapmnt/DSP 4718592 2888416 39% 12790 2% /sapmnt/DSP
ddrsap12:/usr/sap/trans 2752512 1084932 61% 5107 3% /usr/sap/trans
Then when I run the sapinst from ddrsap02 to install the DI I get the following error
ddrsap02[/tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI]#vi sapinst_dev.log
"sapinst_dev.log" 20516 lines, 641048 characters
TRACE
Running with toplevel file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/toplevel.xml
Running with dialog file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/dialog.xml
Running with keydb file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/keydb.xml
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaejs701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iacdlib701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaccdlib.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iapasswdman701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
This is SAPinst, version 701, make variant 700_REL, build 817256
compiled on Mar 14 2006, 23:39:26
TRACE [syxxsyshlp.cpp:175]
 syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
_ = /tmp/sapinst_exe.397528.1170221882/sapinstexe
SAPINST_EXE_DIR = /tmp/sapinst_exe.397528.1170221882
LANG = en_US
LOGIN = root
PATH = /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
SAPINST_EXEDIR_CD = /stage/51031797/IM_AIX_PPC64/.
LC__FASTMSG = true
WINDOWID = 8388621
"sapinst_dev.log" 20516 lines, 641048 characters
 EJS_Installer::writeTraceToLogBook()
2007-01-31 09:42:48.898 NWDB.getDBHost() done: undefined
ERROR 2007-01-31 09:42:48 [iaxxinscbk.cpp:271]
 abortInstallation
CJS-00030 Assertion failed: in getSidFromProfiles: Variable dbHost should be defined
TRACE [iaxxejsbas.hpp:388]
 handleException<ESAPinstException>()
Converting exception into JS Exception Exception.
ERROR 2007-01-31 09:42:48
 CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-01-31 09:42:48
FCO-00011 The step assertDBInfo with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|assertDBInfo was executed with status ERROR .
<html><head></head><body>An error occurred while processing service SAP ERP 2005 Support Release 1 > SAP Systems > Oracle > High-Availability System > Base
d on AS ABAP and AS Java > Dialog Instance. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button
to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to /tmp/sapinst_instdir/ERP/SYST
EM/ORA/HA/ABAPJAVA/DI.</body></html>
TRACE [iaxxgenimp.cpp:1093]
 showDialog()
waiting for an answer from gui
Am I missing some pre-reqs or variable definitions?
I was going through the documentation and it says that /sapmnt/DSP/exe should be a local filesystem for a DI on a separate server. Will this create a problem ?
Also they talk about starting sapinst with the variable SAPINST_USE_HOSTNAME set to ddrsap02. I have tried this also
We are also not 100% sure about the settings for parameters:
rdisp/mssserv
rdisp/mssserv_internal
Accorss Devault Instance and Services Instance profile.
When we define it as per installation GUIDE (Abap+Java page 64) we get the popup message in SAPINST:
<html>Profile parameter rdisp/msserv_internal is not set for instance DVEBMGS01/DSP on host dprsap01.You have to set the parameter in the default profile and restart the instance.For further information refer to SAP Note 821875.</html>
Other errors follow shortly.
Any help would be appreciated

Hi ,
are you able to resolve this error :Profile parameter rdisp/msserv_internal is not set for instance DVEBMGS01/DSP on host dprsap01.
You have to set the parameter in the default profile and restart the instance.
For further information refer to SAP Note 821875.</html>
? if yes , pls let me know , I am stuck with same issue while installing dialog instance .
Thanks
Hamendra

ABAP+JAVA Systemcopy - Wrong sapgw after the copy

For our BI system, we did an ABAP+JAVA systemcopy that appeared to complete successfully. Both ABAP and JAVA start cleanly but when we execute the URL to logon through the Java, we now get this error:
Application error occurred during request processing.
Details:   java.lang.NullPointerException: null
Exception id: [001E0B50DDFD002C0000000000006655000483965C5A18B6]
In my server0 logs, I find the following issue:
[Thr 198] * ERROR       partner 'localhost:sapgw55' not reached
That is the sapgw from our Production system, not the refreshed Development system. Obviously, I made a mistake somewhere in the copy. The question is whether this can be resolved post-refresh? Or do I have to do the whole systemcopy over again (a big task)?
The ABAP side works find so I'm really baffled as to how this sapgw could be off only on the Java side.
Thanks.

I find some entries in the default.trc that have a "Caused by" for Child not found. But when I search just on the Exception ID, I only have this message:
The error is: java.lang.NullPointerException: null^M
Exception id: [001E0B50DDFD00190000003400006655000483CD8B19DAC9]#
#1.5^H#001E0B50DDFD00270000000300006655000483CDA6B50994#1270819171238#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/irj#com.sap.engine.services.servlets_jsp.client.RequestInfoServe
r#J2EE_GUEST#0##n/a##8842446043da11dfcff7001e0b50ddfd#SAPEngine_Application_Thread[impl:3]_20##0#0#Error##Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error. The er
ror is: java.lang.NullPointerException
        at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5^H#001E0B50DDFD00270000000500006655000483CDA6B50CD0#1270819171239#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/irj#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2
EE_GUEST#0##n/a##8842446043da11dfcff7001e0b50ddfd#SAPEngine_Application_Thread[impl:3]_20##0#0#Error#1#/System/Server/WebRequests#Plain###application [irj] Processing HTTP request to servlet [gateway] fin
ished with error.^M
The error is: java.lang.NullPointerException: null^M
Exception id: [001E0B50DDFD00270000000300006655000483CDA6B50994]#

Error in page which is using file system DC as source of data .

Hi All,
I have created file system connection using create content repository connection .
I have exposed this file system as a data control.
Form this data control i have creatd a jspx page by dragging and dropping .
I am getting following exceptions while trying to run this page .
Starting WLS with line:
<Exception>
java.lang.NoClassDefFoundError: and
Caused by: java.lang.ClassNotFoundException: and
 at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
 at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
 at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
Could not find the main class: and. Program will exit.
Exception in thread "main" Process exited.
</Exception>
please help me to get this issue resolved .
Thanks,
Arun.

From your stack trace, it sounds like you are trying to run a Java class and it has no main() i.e. public static void main(String args[]). Maybe check that you've actually created a Fusion application and there's a Web Content directory or faces servlet present? (I'm guessing here) Running the .jspx without the context will probably just give you that error message because there's no main().
Cappa

Copy Orace file-system database to ASM

Hi,
We are planning to use ASM and migrate of file-system database
How do you move/copy oracle datafiles,logfiles,controlfiles,*.dbf to ASM?
The docs said ASM does not allow OS copy commands :(
Thanks a lot

Thanks a lot Hussein, Arnoud :) I like those docs very short/summarized and easy to understand, unlike other oracle manuals which gives you lots of choices/platforms/versions/ and confusion mixed in one.
By the way I am planning to install a new set of 64-bit EBS R12 on ASM/RAC and leave alone our EBS R12 32bit(filesytem) running. I dont like to migrate it because it so critical
and sensitive to touch.
Just a little clarification :).....When I run EBS R12 installer (database tier side) It ask for
home directories like: /u01/app/orace
My question is I want my database files (.dbf) to be directed to an ASM disk
How do I input it in the Rapidwiz installer? I did not see any options there to use ASM disk.
Thanks again

CR 2010 Report using "File System Data" as source fails in production

Hello, I've recently upgraded my website from VS 2008 with full CR 2008 to VS 2010 using CR 2010 SP1 runtime (x32). Everything went fine except for one report that uses as a source the "file system data". It points to a share on a samba drive and it worked great before the upgrade. After upgrading my development box the report runs fine, but when I deployed it, it fails with the message:
Failed to load database information. Error in File {report name} {D5D84E7F-54DB-4BCA-B3C3-0A169CDC36D7}.rpt: Failed to load database information.
I made sure the websiteu2019s Application Pool identity was set to use credentials of a user who has access to the share.
The data source has the following properties:
Database DLL: crbd_filesystem.dll
File Mask: .
Include Empty Directories: False
Max Number of Subdirectory Levels: -1
Starting Directory:
{FreeBSD server name}\{share name}
This report uses a sub-report which has the same source. This report works fine from (full) CR 2008 and from the designer inside of VS 2010 works too. I can run it on my development box (in release and debug modes) which is Windows 7 (x64) using IIS 7.
In production, we donu2019t include the runtime in our application deployment, since we run multiple sites and do updates frequently, so we pre-install (one time) the runtime separately on the server. We installed the CR 2010 SP1 x32 runtime on our test and development boxes which both are Windows 2003 with IIS6 and made sure they are setup to use .Net 4 and have the Application Pool identity setup to have access to the share. All my other reports which use ODBC work fine. Just this one report doesnu2019t and Iu2019m at a loss on how to even begin troubleshooting this.
Is CR 2010 still capable of using u201Cfile system datau201D as a source? I couldnu2019t find anything on u201Cfile system datau201D with CR 2010. Though I have seen under Other Sources, it still exist when I created a new report, just to try it out.

Looks like you've found a bug with the CRVS2010 runtime. I looked for the crbd_filesystem.dll in the CRVS2010 install directory (C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86) and it is there. I then opened up the 32 bit MSI and MSM with the MS Orca utility to see if the file is included and it is not.
Two things we can do:
1) Add the crdb_filesystem.dll to your install and make sure it installs to the above directory on the runtime computer
2) I will created a fix request for the issue, however next fix will be Service Pack 2 (ETA, sometime after October) and I doubt this will make it there. So we'd be looking at SP 3 - if there will be one (ETA would be in 2012).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

How to control permissions in KM using File System Repository Manager

Hello everybody
I have a scenario with 15+ file servers which content needs to be mapped into Portal KM as read-only.
Windows Authentication is configured on the portal, so the users don't need to supply the portal with username/password.
Now the users are of course only allowed to see the same content in the portal as they can see on the file servers. I know that the permission mapping can be done using a File System Repository Manager with W2KSecurityManager, but in that case the users will have to maintain the mapping of rights from windows to portal manually. And with ever-changing passwords this is too big an administrative task. So I am looking for another solution.
My question is therefore:
How can you configure the File System Repository Manager in a way where it the user does not need to maintain "user mapping" manually, but only need to logon to the portal (through windows authentication) and can see the same files from the portal as he/she can see from the file servers.
Can this information in some way be taken from the configured Windows Authentication? Or is the only solution to enable WebDav on the file servers and and follow the "Integration of Windows File Servers into the SAP KM platform Using SSO and the WebDAV Repository Manager"-guide?
Any help will be rewarded.
Best regards,
Martin Søgaard

Hi again Dirk
I just studied the "Integration of Windows File Servers into the SAP KM platform using SSO and the WebDAV repository manager"-guide in depth and I don't quite understand what rights the cmadmin_service and notificator_service are supposed to be given in the Active Directory. In the guide it says:
"A number of global services and repository services need to perform operations on resources in various repositories. For example, the index management service must read all resources it is meant to index. When an index is created, the service user index_service is used. Therefore, this user has to have at least read access to all repositories that are to be indexed. Other users that are used by the SAP KM platform are the service users notificator_service and cmadmin_service. When a search is taking place, it is the user that is currently logged on to the portal."
I dont quite understand what the two service users are doing but more importantly, I need to give the two service users the correct permissions in the Active Directory (or through user mapping). I understand that index_service only needs read_only permissions, but what permissions should the cmadmin_service and notificator_service be given?
Best regards,
Martin

How to use file system replacing optical archive?

We do not have IXOS (OT) yet.
However I have configured everything for printlist archiving and early archiving for IXOS (on the R3 side ONLY!)
May I modify the procedure a bit so that the archive will be stored in the file system instead of the
optical device since we do not have IXOS yet.
Please help. Thanks!

hi,
Create Queues
In this customizing activity you create queues and specify the queue administrator. This process should become part of the installation routine of the storage system, because not activating a queue can lead to irreparable errors (and may mean having to repeat print list creation and storage).
Example
CARA Queue: Queue in which the spool writes the storage requests.
Activities
You can create queues for the following functions:
Asynchronous storage (CARA-Queue)
Error in asynchronous storage (CARA_E-Queue)
Storage confirmation (CFBC-Queue)
Error in storage confirmation (CFBC_E-Queue)
Asynchronous retrieval (CFBA-Queue)
Error in asynchronous retrieval (CFBA_E-Queue)
You can also define a queue administrator.
Also u can check in archivelinking.
Edit Links
In this customizing activity, you link a document type to an object type, a content repository, and a link table. This has the following effect on documents of this document type:
The documents can only be linked to instances of the specified business object type.
The link entry is entered in the specified link table.
The documents are always stored in the specified content repository.
Activities
Enter the following data:
Object type:
Business object type that exists in the business object repository (transaction SWO3).
One object type can be used with more than one document type.
Document type
Name of a document type specified in the customizing activity Document types .
Status
X: The storage system is active.
Empty: The storage system is not active.
Content repository ID
Two-digit identification number that you have entered in the customizing activity Maintain Content Repositories .
Link table
Name of the table, in which ArchiveLink enters the link entries between stored documents and the corresponding application documents.
SAP supplies the following link tables:
TOA01, TOA02, TOA03 (general link tables),
TOAHR (only for documents from the SAP HR application component),
and
TOADL (only for print lists).
Alternatively, you can define your own link tables. To do this, enter the customizing activity Maintain available link tables. Here you can also find a description of the link tables supplied by SAP.
Retention period
Number of months the entry for the stored document remains in the link table before it is deleted.
Benakaraja

ECC6 EHP2 (ABAP+Java) system copy using file system copy

Similar Messages

Maybe you are looking for