ECC6 EHP5 issue with authorisations now need access to S_DEVELOP

Hi
We have ECC6 and have just upgraded to EHP5 and have found that many HR reports/transactions now need access to S_DEVELOP authorisation object.  This  has caused issues with our user roles.  Has anyone else experienced this issue?
Many thanks
Julie

Hi Julie,
Please implement SAP note :  1487329  "Additional Authorization Check in ABAP Workbench" that should solve your issue. There is also note 1617448 "WD ABAP Team Calendar needs S_DEVELOP authorization to load". Hope it helps,
Kind Regards
Christine

Similar Messages

  • Started having issues with camera raw. cannot access from bridge. Greyed out.

    Started having issues with accessing camera raw from bridge. I have CS6 and LR5. Should I attempt to uninstall CS6 and reinstall. I have backup on external hard drive for my photos but will I need to reimport photos after uninstall? Some of the forums are suggesting that my program might be corrupt. Can anyone assist?

    This should solve problem.  http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html

  • I'm having issues with oracle ODBC and access 2007

    Hello all,
         I'm having an issue with using an ODBC connection with a pass-through query in access 2007. I have Oracle 9i installed and am on Windows 7 32 bit. This only seems to be effecting Windows 7 users and not XP users.
    The error in the SQL Log is this.
    CLDemoFE        1694-162c EXIT  SQLDriverConnectW  with return code -1 (SQL_ERROR)
      HDBC                0x00787430
      HWND                0x000501FC
      WCHAR *             0x6D3A8B34 [      -3] "******\ 0"
      SWORD                       -3
      WCHAR *             0x6D3A8B34
      SWORD                       -3
      SWORD *             0x00000000
      UWORD                        0 <SQL_DRIVER_NOPROMPT>
      DIAG [NA000] [Microsoft][ODBC driver for Oracle][Oracle]ORA-01019: unable to allocate memory in the user side (1019)
      DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
      DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
    I've been looking all over the internet and can't find an answer to the issue and decided to post it to see what other people thought.
    Thank you in advance.

    I've had exactly the same problem for weeks now.   When using Safari, it stalls, freezes, then starts working again.  I checked the console and exactly when it freezes.  I get the following:
    2015-02-25 5:51:59.000 PM kernel[0]: process com.apple.WebKit[405] caught causing excessive wakeups. Observed wakeups rate (per sec): 216; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 849849
    and:
    2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.FC16A539-929A-43E5-91EB-34A5669B70FD[1265]) Could not terminate job: 3: No such process
    2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.FC16A539-929A-43E5-91EB-34A5669B70FD[1265]) Using fallback option to terminate job...
    2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.1004D4B5-112D-4D90-9779-B2BEFB570C7F[1262]) Could not terminate job: 3: No such process
    2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.1004D4B5-112D-4D90-9779-B2BEFB570C7F[1262]) Using fallback option to terminate job...
    2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.9F72A6A1-63F5-41B2-B02F-40D4CB0925A2[1261]) Could not terminate job: 3: No such process
    2015-02-25 9:21:46.834 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.9F72A6A1-63F5-41B2-B02F-40D4CB0925A2[1261]) Using fallback option to terminate job...
    2015-02-25 9:21:46.864 PM com.apple.launchd[1]: (com.apple.WebKit.Networking.8CDDD2D1-B6B6-4F09-B8DE-5C4A4E9F653E[1260]) Exited with code: 1
    2015-02-25 9:21:46.998 PM com.apple.launchd[1]: (com.apple.WebKit.Plugin.64.39152B03-68E5-463E-A6C0-A9734AF733A2[1268]) Exited with code: 1

  • Having issues with WRT350n - "No internet Access"

    I am having issues with the WRT350n where I am getting an "No internet access" message. When I look at the wireless network connection I can see the wireless router and it says "connected" but when I scroll my mouse over the icon, it reads "No internet access". I try to access a webpage and it will not work. I originally had it connected and working properly in my home. However, I removed it and tried connecting in my office and started experiencing this problem. I did not run the setup using the CD provided. I just unplugged it from my home network and reconnected it to my office network, of course with a few passphrase changes and wireless MAC filters only allowing certain PC's to be able to access the internet. I double checked all MAC addresses of each device that I entered into the table and they are correct. All devices see the wireless network but cannot access the internet. Any suggestions? Should I re-run the installation using the CD?

    A router once it is powered on it will always broadcast a wifi signal and will allow you to connect to the network with or without the internet connection. Once of the best way to know if the router is working ok, wire a computer directly to the router with a cable and check if you are able to go online that way. if it is working then better check that wireless mac filter, disable it first, then see if the internet will go thru. If wired to the router it is not working, then better run that setup cd again.

  • I had to uninstall Firefox for diagnostic reasons on my Dell desktop, and am having hundreds of issues with shortcuts now. I want to get it perfectly operational with IE, then switch back to Firefox

    I was having minor registry issues after switching to Firefox, and Dell suggested going back to IE to see if that cured the problem. Upon uninstalling Mozilla, and reinstalling IE, none of the desktop shortcuts worked in fact, a partial window opened, and locked up the screen. Dell suggested contacting you to find out if maybe the uninstall did not work completely.
    Any suggestions?

    It most definitely is the browser that is causing most of the problems. I have used Firefox so long, I can't even remember. Maybe since its beginning. But today is a sad day. I gave up on it. I can't accomplish anything and end up spending hours troubleshooting. I see I am not alone. I am so sick of it "not responding." It's simply not worth it to spend so much time trying to make the thing work, so I can actually do something. Installed, removed, reinstalled numerous times, and I can't fix your software on my Win 7 Pro machine. No problems with IE or Chrome. So. as much as I hate Google Update, Chrome has won the test. Sad, sad day for me to lose Firefox, but it just does not work on the Win 7 machine. I don't have the same issues with the XP machine and have exactly all the same add-ons. Keep it up developers and you will have no Win 7 users at all.

  • Issue with spamassassin, now mail not working

    Hi ! I installed spamtrainer almost two months ago. Been feeding the [email protected] for several weeks now , 700 emails each day at least .
    There was very little improvement if none at all. Tried to add "@local_domains_maps = (1)" to amavisd.conf last night thinking it might be the problem , though no virtual domain exist. This was one of the issue on the default Amavisd config. The other one is adding the symbolic link which I already done.
    Computer froze while adding the parameter "@local_domains_maps = (1)", so I manually turn off the Power Mac, then mail stopped altogether. The mails are filing up but the clients couldn't send or receive since this incidence .
    FF is the maincf. and amavis.conf
    All help are greatly appreciated.
    mail:/Users/sysadmin root# postconf -n
    alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
    always_bcc =
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debug_peer_level = 2
    enable_server_options = yes
    html_directory = no
    inet_interfaces = all
    local_recipient_maps = proxy:unix:passwd.byname $alias_maps
    luser_relay =
    mail_owner = postfix
    mailbox_size_limit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 31457280
    mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
    mydomain = cpplaw.com
    mydomain_fallback = localhost
    myhostname = mail.cpplaw.com
    mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    owner_request_special = no
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost =
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpd_client_restrictions = permit_mynetworks permit
    smtpd_tls_key_file =
    unknown_local_recipient_reject_code = 550
    virtual_mailbox_domains =
    virtual_transport = virtual
    mail:/Users/sysadmin root# postconf -n
    alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
    always_bcc =
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debug_peer_level = 2
    enable_server_options = yes
    html_directory = no
    inet_interfaces = all
    local_recipient_maps = proxy:unix:passwd.byname $alias_maps
    luser_relay =
    mail_owner = postfix
    mailbox_size_limit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 31457280
    mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
    mydomain = cpplaw.com
    mydomain_fallback = localhost
    myhostname = mail.cpplaw.com
    mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    owner_request_special = no
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost =
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpd_client_restrictions = permit_mynetworks permit
    smtpd_tls_key_file =
    unknown_local_recipient_reject_code = 550
    virtual_mailbox_domains =
    virtual_transport = virtual
    mail:/Users/sysadmin root#
    _______________________Amavisd.cof_________________________
    use strict;
    # Configuration file for amavisd-new
    # This software is licensed under the GNU General Public License (GPL).
    # See comments at the start of amavisd-new for the whole license text.
    #Sections:
    # Section I - Essential daemon and MTA settings
    # Section II - MTA specific
    # Section III - Logging
    # Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
    # Section V - Per-recipient and per-sender handling, whitelisting, etc.
    # Section VI - Resource limits
    # Section VII - External programs, virus scanners, SpamAssassin
    # Section VIII - Debugging
    #GENERAL NOTES:
    # This file is a normal Perl code, interpreted by Perl itself.
    # - make sure this file (or directory where it resides) is NOT WRITABLE
    # by mere mortals, otherwise it represents a severe security risk!
    # - for values which are interpreted as booleans, it is recommended
    # to use 1 for true, and 0 or undef or '' for false.
    # THIS IS DIFFERENT FROM OLDER AMAVIS VERSIONS where "no" also meant false,
    # now it means true, like any nonempty string does!
    # - Perl syntax applies. Most notably: strings in "" may include variables
    # (which start with $ or @); to include characters @ and $ in double
    # quoted strings, precede them by a backslash; in single-quoted strings
    # the $ and @ lose their special meaning, so it is usually easier to use
    # single quoted strings. Still, in both cases a backslash need to be doubled
    # - variables with names starting with a '@' are lists, the values assigned
    # to them should be lists as well, e.g. ('one@foo', $mydomain, "three");
    # note the comma-separation and parenthesis. If strings in the list
    # do not contain spaces nor variables, a Perl operator qw() may be used
    # as a shorthand to split its argument on whitespace and produce a list
    # of strings, e.g. qw( one@foo example.com three ); Note that the argument
    # to qw is quoted implicitly and no variable interpretation is done within
    # (no '$' variable evaluations). The #-initiated comments can not be used
    # within the string. In other words, $ and # lose their special meaning
    # withing a qw argument, just like within '...' strings.
    # - all e-mail addresses in this file and as used internally by the daemon
    # are in their raw (rfc2821-unquoted and nonbracketed) form, i.e.
    # Bob "Funny" [email protected], not: "Bob \"Funny\" Dude"@example.com
    # and not <"@example.com>; also: '' and not ''.
    # Section I - Essential daemon and MTA settings
    # $MYHOME serves as a quick default for some other configuration settings.
    # More refined control is available with each individual setting further down.
    # $MYHOME is not used directly by the program. No trailing slash!
    #$MYHOME = '/var/lib/amavis'; # (default is '/var/amavis')
    # : $mydomain serves as a quick default for some other configuration settings.
    # : More refined control is available with each individual setting further down.
    # : $mydomain is never used directly by the program.
    $mydomain = 'cpplaw.com'; aol.com'; # (no useful default)
    # Set the user and group to which the daemon will change if started as root
    # (otherwise just keep the UID unchanged, and these settings have no effect):
    $daemon_user = 'clamav'; # (no default; customary: vscan or amavis)
    $daemon_group = 'clamav'; # (no default; customary: vscan or amavis)
    # Runtime working directory (cwd), and a place where
    # temporary directories for unpacking mail are created.
    # (no trailing slash, may be a scratch file system)
    $TEMPBASE = $MYHOME; # (must be set if other config vars use is)
    #$TEMPBASE = "$MYHOME/tmp"; # prefer to keep home dir /var/amavis clean?
    # $helpers_home sets environment variable HOME, and is passed as option
    # 'home_dir_for_helpers' to Mail::SpamAssassin::new. It should be a directory
    # on a normal persistent file system, not a scratch or temporary file system
    #$helpers_home = $MYHOME; # (defaults to $MYHOME)
    #$daemon_chroot_dir = $MYHOME; # (default is undef, meaning: do not chroot)
    #$pid_file = "$MYHOME/amavisd.pid"; # (default is "$MYHOME/amavisd.pid")
    #$lock_file = "$MYHOME/amavisd.lock"; # (default is "$MYHOME/amavisd.lock")
    # set environment variables if you want (no defaults):
    $ENV{TMPDIR} = $TEMPBASE; # wise, but usually not necessary
    # MTA SETTINGS, UNCOMMENT AS APPROPRIATE,
    # both $forward_method and $notify_method default to 'smtp:127.0.0.1:10025'
    # POSTFIX, or SENDMAIL in dual-MTA setup, or EXIM V4
    # (set host and port number as required; host can be specified
    # as IP address or DNS name (A or CNAME, but MX is ignored)
    #$forward_method = 'smtp:127.0.0.1:10025'; # where to forward checked mail
    #$notify_method = $forward_method; # where to submit notifications
    # NOTE: The defaults (above) are good for Postfix or dual-sendmail. You MUST
    # uncomment the approprate settings below if using other setups!
    # SENDMAIL MILTER, using amavis-milter.c helper program:
    #$forward_method = undef; # no explicit forwarding, sendmail does it by itself
    # milter; option -odd is needed to avoid deadlocks
    #$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -odd -f ${sender} -- ${recipient}';
    # just a thought: can we use use -Am instead of -odd ?
    # SENDMAIL (old non-milter setup, as relay):
    #$forward_method = 'pipe:flags=q argv=/usr/sbin/sendmail -C/etc/sendmail.orig.cf -i -f ${sender} -- ${recipient}';
    #$notify_method = $forward_method;
    # SENDMAIL (old non-milter setup, amavis.c calls local delivery agent):
    #$forward_method = undef; # no explicit forwarding, amavis.c will call LDA
    #$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -f ${sender} -- ${recipient}';
    # EXIM v3 (not recommended with v4 or later, which can use SMTP setup instead):
    #$forward_method = 'pipe:flags=q argv=/usr/sbin/exim -oMr scanned-ok -i -f ${sender} -- ${recipient}';
    #$notify_method = $forward_method;
    # prefer to collect mail for forwarding as BSMTP files?
    #$forward_method = "bsmtp:$MYHOME/out-%i-%n.bsmtp";
    #$notify_method = $forward_method;
    # Net::Server pre-forking settings
    # You may want $max_servers to match the width of your MTA pipe
    # feeding amavisd, e.g. with Postfix the 'Max procs' field in the
    # master.cf file, like the '2' in the: smtp-amavis unix - - n - 2 smtp
    $max_servers = 2; # number of pre-forked children (default 2)
    $max_requests = 10; # retire a child after that many accepts (default 10)
    $child_timeout=5*60; # abort child if it does not complete each task in n sec
    # (default: 8*60 seconds)
    # Check also the settings of @av_scanners at the end if you want to use
    # virus scanners. If not, you may want to delete the whole long assignment
    # to the variable @av_scanners, which will also remove the virus checking
    # code (e.g. if you only want to do spam scanning).
    # Here is a QUICK WAY to completely DISABLE some sections of code
    # that WE DO NOT WANT (it won't even be compiled-in).
    # For more refined controls leave the following two lines commented out,
    # and see further down what these two lookup lists really mean.
    #@bypass_virus_checks_acl = qw( . ); # uncomment to DISABLE anti-virus code
    #@bypass_spam_checks_acl = qw( . ); # uncomment to DISABLE anti-spam code
    # Any setting can be changed with a new assignment, so make sure
    # you do not unintentionally override these settings further down!
    # Lookup list of local domains (see README.lookups for syntax details)
    # NOTE:
    # For backwards compatibility the variable names @local_domains (old) and
    # @local_domains_acl (new) are synonyms. For consistency with other lookups
    # the name @local_domains_acl is now preferred. It also makes it more
    # obviously distinct from the new %local_domains hash lookup table.
    # local_domains* lookup tables are used in deciding whether a recipient
    # is local or not, or in other words, if the message is outgoing or not.
    # This affects inserting spam-related headers for local recipients,
    # limiting recipient virus notifications (if enabled) to local recipients,
    # in deciding if address extension may be appended, and in SQL lookups
    # for non-fqdn addresses. Set it up correctly if you need features
    # that rely on this setting (or just leave empty otherwise).
    # With Postfix (2.0) a quick reminder on what local domains normally are:
    # a union of domains spacified in: $mydestination, $virtual_alias_domains,
    # $virtual_mailbox_domains, and $relay_domains.
    @local_domains_acl = ( ".$mydomain" ); # $mydomain and its subdomains
    # @local_domains_acl = qw(); # default is empty, no recipient treated as local
    # @local_domains_acl = qw( .example.com );
    # @local_domains_acl = qw( .example.com !host.sub.example.net .sub.example.net );
    # @local_domains_acl = ( ".$mydomain", '.example.com', 'sub.example.net' );
    # or alternatively(A), using a Perl hash lookup table, which may be assigned
    # directly, or read from a file, one domain per line; comments and empty lines
    # are ignored, a dot before a domain name implies its subdomains:
    #read_hash(\%local_domains, '/var/amavis/local_domains');
    #or alternatively(B), using a list of regular expressions:
    # $local_domains_re = new_RE( qr'[@.]example\.com$'i );
    # see README.lookups for syntax and semantics
    # Section II - MTA specific (defaults should be ok)
    # if $relayhost_is_client is true, IP address in $notify_method and
    # $forward_method is dynamically overridden with SMTP client peer address
    # if available, which makes possible for several hosts to share one daemon
    #$relayhost_is_client = 1; # (defaults to false)
    #$insert_received_line = 1; # behave like MTA: insert 'Received:' header
    # (does not apply to sendmail/milter)
    # (default is true)
    # AMAVIS-CLIENT PROTOCOL INPUT SETTINGS (e.g. with sendmail milter)
    # (used with amavis helper clients like amavis-milter.c and amavis.c,
    # NOT needed for Postfix and Exim)
    $unix_socketname = "$MYHOME/amavisd.sock"; # amavis helper protocol socket
    #$unix_socketname = undef; # disable listening on a unix socket
    # (default is undef, i.e. disabled)
    # (usual setting is $MYHOME/amavisd.sock)
    # Do we receive quoted or raw addresses from the helper program?
    # (does not apply to SMTP; defaults to true)
    #$gets_addr_in_quoted_form = 1; # "Bob \"Funny\" Dude"@example.com
    #$gets_addr_in_quoted_form = 0; # Bob "Funny" [email protected]
    # SMTP SERVER (INPUT) PROTOCOL SETTINGS (e.g. with Postfix, Exim v4, ...)
    # (used when MTA is configured to pass mail to amavisd via SMTP or LMTP)
    $inet_socket_port = 10024; # accept SMTP on this local TCP port
    # (default is undef, i.e. disabled)
    # multiple ports may be provided: $inet_socket_port = [10024, 10026, 10028];
    # SMTP SERVER (INPUT) access control
    # - do not allow free access to the amavisd SMTP port !!!
    # when MTA is at the same host, use the following (one or the other or both):
    #$inet_socket_bind = '127.0.0.1'; # limit socket bind to loopback interface
    # (default is '127.0.0.1')
    @inet_acl = qw( 127.0.0.1 ); # allow SMTP access only from localhost IP
    # (default is qw( 127.0.0.1 ) )
    # when MTA (one or more) is on a different host, use the following:
    #@inet_acl = qw(127/8 10.1.0.1 10.1.0.2); # adjust the list as appropriate
    #$inet_socket_bind = undef; # bind to all IP interfaces
    # Example1:
    # @inet_acl = qw( 127/8 10/8 172.16/12 192.168/16 );
    # permit only SMTP access from loopback and rfc1918 private address space
    # Example2:
    # @inet_acl = qw( !192.168.1.12 172.16.3.3 !172.16.3/255.255.255.0
    # 127.0.0.1 10/8 172.16/12 192.168/16 );
    # matches loopback and rfc1918 private address space except host 192.168.1.12
    # and net 172.16.3/24 (but host 172.16.3.3 within 172.16.3/24 still matches)
    # Example3:
    # @inet_acl = qw( 127/8
    # !172.16.3.0 !172.16.3.127 172.16.3.0/25
    # !172.16.3.128 !172.16.3.255 172.16.3.128/25 );
    # matches loopback and both halves of the 172.16.3/24 C-class,
    # split into two subnets, except all four broadcast addresses
    # for these subnets
    # See README.lookups for details on specifying access control lists.
    # Section III - Logging
    # true (e.g. 1) => syslog; false (e.g. 0) => logging to file
    $DO_SYSLOG = 0; # (defaults to false)
    #$SYSLOG_LEVEL = 'user.info'; # (defaults to 'mail.info')
    # Log file (if not using syslog)
    $LOGFILE = "/var/log/amavis.log"; # (defaults to empty, no log)
    #NOTE: levels are not strictly observed and are somewhat arbitrary
    # 0: startup/exit/failure messages, viruses detected
    # 1: args passed from client, some more interesting messages
    # 2: virus scanner output, timing
    # 3: server, client
    # 4: decompose parts
    # 5: more debug details
    $log_level = 4; # (defaults to 0)
    # Customizeable template for the most interesting log file entry (e.g. with
    # $log_level=0) (take care to properly quote Perl special characters like '\')
    # For a list of available macros see README.customize .
    # only log infected messages (useful with log level 0):
    # $log_templ = '[? %#V |[? %#F ||banned filename ([%F|,])]|infected ([%V|,])]#
    # [? %#V |[? %#F ||, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]#
    # |, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]';
    # log both infected and noninfected messages (default):
    $log_templ = '[? %#V |[? %#F |[?%#D|Not-Delivered|Passed]|BANNED name/type (%F)]|INFECTED (%V)], #
    <%o> -> [<%R>|,][? %i ||, quarantine %i], Message-ID: %m, Hits: %c';
    # Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
    # Select notifications text encoding when Unicode-aware Perl is converting
    # text from internal character representation to external encoding (charset
    # in MIME terminology)
    # to be used in RFC 2047-encoded header field bodies, e.g. in Subject:
    #$hdr_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
    # to be used in notification body text: its encoding and Content-type.charset
    #$bdy_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
    # Default template texts for notifications may be overruled by directly
    # assigning new text to template variables, or by reading template text
    # from files. A second argument may be specified in a call to read_text(),
    # specifying character encoding layer to be used when reading from the
    # external file, e.g. 'utf8', 'iso-8859-1', or often just $bdy_encoding.
    # Text will be converted to internal character representation by Perl 5.8.0
    # or later; second argument is ignored otherwise. See PerlIO::encoding,
    # Encode::PerlIO and perluniintro man pages.
    # $notify_sender_templ = read_text('/var/amavis/notify_sender.txt');
    # $notify_virus_sender_templ= read_text('/var/amavis/notify_virus_sender.txt');
    # $notify_virus_admin_templ = read_text('/var/amavis/notify_virus_admin.txt');
    # $notify_virus_recips_templ= read_text('/var/amavis/notify_virus_recips.txt');
    # $notify_spam_sender_templ = read_text('/var/amavis/notify_spam_sender.txt');
    # $notify_spam_admin_templ = read_text('/var/amavis/notify_spam_admin.txt');
    # If notification template files are collectively available in some directory,
    # use read_l10n_templates which calls read_text for each known template.
    # read_l10n_templates('/etc/amavis/en_US');
    # Here is an overall picture (sequence of events) of how pieces fit together
    # (only virus controls are shown, spam controls work the same way):
    # bypass_virus_checks set for all recipients? ==> PASS
    # no viruses? ==> PASS
    # log virus if $log_templ is nonempty
    # quarantine if $virus_quarantine_to is nonempty
    # notify admin if $virus_admin (lookup) nonempty
    # notify recips if $warnvirusrecip and (recipient is local or $warn_offsite)
    # add address extensions for local recipients (when enabled)
    # send (non-)delivery notifications
    # to sender if DSN needed (BOUNCE) or ($warnvirussender and D_PASS)
    # virus_lovers or final_destiny==D_PASS ==> PASS
    # DISCARD (2xx) or REJECT (5xx) (depending on final_*_destiny)
    # Equivalent flow diagram applies for spam checks.
    # If a virus is detected, spam checking is skipped entirely.
    # The following symbolic constants can be used in *destiny settings:
    # D_PASS mail will pass to recipients, regardless of bad contents;
    # D_DISCARD mail will not be delivered to its recipients, sender will NOT be
    # notified. Effectively we lose mail (but will be quarantined
    # unless disabled). Not a decent thing to do for a mailer.
    # D_BOUNCE mail will not be delivered to its recipients, a non-delivery
    # notification (bounce) will be sent to the sender by amavisd-new;
    # Exception: bounce (DSN) will not be sent if a virus name matches
    # $viruses_that_fake_sender_re, or to messages from mailing lists
    # (Precedence: bulk|list|junk);
    # D_REJECT mail will not be delivered to its recipients, sender should
    # preferably get a reject, e.g. SMTP permanent reject response
    # (e.g. with milter), or non-delivery notification from MTA
    # (e.g. Postfix). If this is not possible (e.g. different recipients
    # have different tolerances to bad mail contents and not using LMTP)
    # amavisd-new sends a bounce by itself (same as D_BOUNCE).
    # Notes:
    # D_REJECT and D_BOUNCE are similar, the difference is in who is responsible
    # for informing the sender about non-delivery, and how informative
    # the notification can be (amavisd-new knows more than MTA);
    # With D_REJECT, MTA may reject original SMTP, or send DSN (delivery status
    # notification, colloquially called 'bounce') - depending on MTA;
    # Best suited for sendmail milter, especially for spam.
    # With D_BOUNCE, amavisd-new (not MTA) sends DSN (can better explain the
    # reason for mail non-delivery, but unable to reject the original
    # SMTP session). Best suited to reporting viruses, and for Postfix
    # and other dual-MTA setups, which can't reject original client SMTP
    # session, as the mail has already been enqueued.
    $final_virus_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
    $final_banned_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
    $final_spam_destiny = D_PASS; # (defaults to D_REJECT)
    $final_bad_header_destiny = D_PASS; # (defaults to D_PASS), D_BOUNCE suggested
    # Alternatives to consider for spam:
    # - use D_PASS if clients will do filtering based on inserted mail headers;
    # - use D_DISCARD, if kill_level is set safely high;
    # - use D_BOUNCE instead of D_REJECT if not using milter;
    # There are no sensible alternatives to D_BOUNCE for viruses, but consider:
    # - use D_PASS (or virus_lovers) and $warnvirussender=1 to deliver viruses;
    # - use D_REJECT instead of D_BOUNCE if using milter and under heavy
    # virus storm;
    # Don't bother to set both D_DISCARD and $warn*sender=1, it will get mapped
    # to D_BOUNCE.
    # The separation of *_destiny values into D_BOUNCE, D_REJECT, D_DISCARD
    # and D_PASS made settings $warnvirussender and $warnspamsender only still
    # useful with D_PASS.
    # The following $warn*sender settings are ONLY used when mail is
    # actually passed to recipients ($final_*_destiny=D_PASS, or *_lovers*).
    # Bounces or rejects produce non-delivery status notification anyway.
    # Notify virus sender?
    #$warnvirussender = 1; # (defaults to false (undef))
    # Notify spam sender?
    #$warnspamsender = 1; # (defaults to false (undef))
    # Notify sender of banned files?
    #$warnbannedsender = 1; # (defaults to false (undef))
    # Notify sender of syntactically invalid header containing non-ASCII characters?
    #$warnbadhsender = 1; # (defaults to false (undef))
    # Notify virus (or banned files) RECIPIENT?
    # (not very useful, but some policies demand it)
    #$warnvirusrecip = 1; # (defaults to false (undef))
    #$warnbannedrecip = 1; # (defaults to false (undef))
    # Notify also non-local virus/banned recipients if $warn*recip is true?
    # (including those not matching local_domains*)
    #$warn_offsite = 1; # (defaults to false (undef), i.e. only notify locals)
    # Treat envelope sender address as unreliable and don't send sender
    # notification / bounces if name(s) of detected virus(es) match the list.
    # Note that virus names are supplied by external virus scanner(s) and are
    # not standardized, so virus names may need to be adjusted.
    # See README.lookups for syntax.
    $viruses_that_fake_sender_re = new_RE(
    qr'nimda|hybris|klez|bugbear|yaha|braid|sobig|fizzer|palyh|peido|holar'i );
    # where to send ADMIN VIRUS NOTIFICATIONS (should be a fully qualified address)
    # - the administrator address may be a simple fixed e-mail address (a scalar),
    # or may depend on the SENDER address (e.g. its domain), in which case
    # a ref to a hash table can be specified (specify lower-cased keys,
    # dot is a catchall, see README.lookups).
    # Empty or undef lookup disables virus admin notifications.
    $virus_admin = '[email protected]';
    # $virus_admin = undef; # do not send virus admin notifications (default)
    # $virus_admin = {'not.example.com' => '', '.' => '[email protected]'};
    # $virus_admin = '[email protected]';
    # equivalent to $virus_admin, but for spam admin notifications:
    #$spam_admin = '[email protected]';# $spam_admin = undef; # do not send spam admin notifications (default)
    # $spam_admin = {'not.example.com' => '', '.' => '[email protected]'};
    #advanced example, using a hash lookup table:
    # - $virus_admin = {
    # '[email protected]' => '[email protected]',
    # '.sub1.example.com' => '[email protected]',
    # '.sub2.example.com' => '', # don't send admin notifications
    # 'a.sub3.example.com' => '[email protected]',
    # '.sub3.example.com' => '[email protected]',
    # '.example.com' => '[email protected]', # catchall for our virus senders
    # '.' => '[email protected]', # catchall for the rest
    # whom notification reports are sent from (ENVELOPE SENDER);
    # may be a null reverse path, or a fully qualified address:
    # (admin and recip sender addresses default to $mailfrom
    # for compatibility, which in turn defaults to undef (empty) )
    # If using strings in double quotes, don't forget to quote @, i.e. \@
    $mailfrom_notify_admin = "virusalert\@$mydomain";
    $mailfrom_notify_recip = "virusalert\@$mydomain";
    $mailfrom_notify_spamadmin = "spam.police\@$mydomain";
    # 'From' HEADER FIELD for sender and admin notifications.
    # This should be a replyable address, see rfc1894. Not to be confused
    # with $mailfrom_notify_sender, which is the envelope address and
    # should be empty (null reverse path) according to rfc2821.
    # $hdrfrom_notify_sender = "amavisd-new <postmaster\@$mydomain>";
    # $hdrfrom_notify_sender = 'amavisd-new <[email protected]>';
    # (defaults to: "amavisd-new <postmaster\@$myhostname>")
    # $hdrfrom_notify_admin = $mailfrom_notify_admin;
    # (defaults to: $mailfrom_notify_admin)
    # $hdrfrom_notify_spamadmin = $mailfrom_notify_spamadmin;
    # (defaults to: $mailfrom_notify_spamadmin)
    # whom quarantined messages appear to be sent from (envelope sender)
    $mailfrom_to_quarantine = undef; # original sender if undef, or set explicitly
    # (default is undef)
    # Location to put infected mail into: (applies to 'local:' quarantine method)
    # empty for not quarantining, may be a file (mailbox),
    # or a directory (no trailing slash)
    # (the default value is undef, meaning no quarantine)
    $QUARANTINEDIR = '/var/virusmails';
    #$virus_quarantine_method = "local:virus-%i-%n"; # default
    #$spam_quarantine_method = "local:spam-%b-%i-%n"; # default
    #use the new 'bsmtp:' method as an alternative to the default 'local:'
    #$virus_quarantine_method = "bsmtp:$QUARANTINEDIR/virus-%i-%n.bsmtp";
    #$spam_quarantine_method = "bsmtp:$QUARANTINEDIR/spam-%b-%i-%n.bsmtp";
    # When using the 'local:' quarantine method (default), the following applies:
    # A finer control of quarantining is available through variable
    # $virus_quarantine_to/$spam_quarantine_to. It may be a simple scalar string,
    # or a ref to a hash lookup table, or a regexp lookup table object,
    # which makes possible to set up per-recipient quarantine addresses.
    # The value of scalar $virus_quarantine_to/$spam_quarantine_to (or a
    # per-recipient lookup result from the hash table %$virus_quarantine_to)
    # is/are interpreted as follows:
    # VARIANT 1:
    # empty or undef disables quarantine;
    # VARIANT 2:
    # a string NOT containg an '@';
    # amavisd will behave as a local delivery agent (LDA) and will quarantine
    # viruses to local files according to hash %local_delivery_aliases (pseudo
    # aliases map) - see subroutine mail_to_local_mailbox() for details.
    # Some of the predefined aliases are 'virus-quarantine' and 'spam-quarantine'.
    # Setting $virus_quarantine_to ($spam_quarantine_to) to this string will:
    # * if $QUARANTINEDIR is a directory, each quarantined virus will go
    # to a separate file in the $QUARANTINEDIR directory (traditional
    # amavis style, similar to maildir mailbox format);
    # * otherwise $QUARANTINEDIR is treated as a file name of a Unix-style
    # mailbox. All quarantined messages will be appended to this file.
    # Amavisd child process must obtain an exclusive lock on the file during
    # delivery, so this may be less efficient than using individual files
    # or forwarding to MTA, and it may not work across NFS or other non-local
    # file systems (but may be handy for pickup of quarantined files via IMAP
    # for example);
    # VARIANT 3:
    # any email address (must contain '@').
    # The e-mail messages to be quarantined will be handed to MTA
    # for delivery to the specified address. If a recipient address local to MTA
    # is desired, you may leave the domain part empty, e.g. 'infected@', but the
    # '@' character must nevertheless be included to distinguish it from variant 2.
    # This method enables more refined delivery control made available by MTA
    # (e.g. its aliases file, other local delivery agents, dealing with
    # privileges and file locking when delivering to user's mailbox, nonlocal
    # delivery and forwarding, fan-out lists). Make sure the mail-to-be-quarantined
    # will not be handed back to amavisd for checking, as this will cause a loop
    # (hopefully broken at some stage)! If this can be assured, notifications
    # will benefit too from not being unecessarily virus-scanned.
    # By default this is safe to do with Postfix and Exim v4 and dual-sendmail
    # setup, but probably not safe with sendmail milter interface without
    # precaution.
    # (the default value is undef, meaning no quarantine)
    #$virus_quarantine_to = '[email protected]'; # traditional local quarantine
    #$virus_quarantine_to = 'infected@'; # forward to MTA for delivery
    #$virus_quarantine_to = "virus-quarantine\@$mydomain"; # similar
    #$virus_quarantine_to = '[email protected]'; # similar
    #$virus_quarantine_to = undef; # no quarantine
    #$virus_quarantine_to = new_RE( # per-recip multiple quarantines
    # [qr'^user@example\.com$'i => 'infected@'],
    # [qr'^(.*)@example\.com$'i => 'virus-${1}@example.com'],
    # [qr'^(.*)(@[^@])?$'i => 'virus-${1}${2}'],
    # [qr/.*/ => 'virus-quarantine'] );
    # similar for spam
    # (the default value is undef, meaning no quarantine)
    #$spam_quarantine_to = '[email protected]';
    #$spam_quarantine_to = "spam-quarantine\@$mydomain";
    #$spam_quarantine_to = new_RE( # per-recip multiple quarantines
    # [qr'^(.*)@example\.com$'i => 'spam-${1}@example.com'],
    # [qr/.*/ => 'spam-quarantine'] );
    # In addition to per-recip quarantine, a by-sender lookup is possible. It is
    # similar to $spam_quarantine_to, but the lookup key is the sender address:
    #$spam_quarantine_bysender_to = undef; # dflt: no by-sender spam quarantine
    # Add X-Virus-Scanned header field to mail?
    $X_HEADER_TAG = 'X-Virus-Scanned'; # (default: undef)
    # Leave empty to add no header field # (default: undef)
    $X_HEADER_LINE = "by amavisd-new at $mydomain";
    $remove_existing_x_scanned_headers = 0; # leave existing X-Virus-Scanned alone
    #$remove_existing_x_scanned_headers= 1; # remove existing headers
    # (defaults to false)
    $remove_existing_spam_headers = 0; # leave existing X-Spam* headers alone
    #$remove_existing_spam_headers = 1; # remove existing spam headers if
    # spam scanning is enabled (default)
    # set $bypass_decode_parts to true if you only do spam scanning, or if you
    # have a good virus scanner that can deal with compression and recursively
    # unpacking archives by itself, and save amavisd the trouble.
    # Disabling decoding also causes banned_files checking to only see
    # MIME names and MIME content types, not the content classification types
    # as provided by the file(1) utility.
    # It is a double-edged sword, make sure you know what you are doing!
    #$bypass_decode_parts = 1; # (defaults to false)
    # don't trust this file type or corresponding unpacker for this file type,
    # keep both the original and the unpacked file
    # (lookup key is what file(1) utility returned):
    $keep_decoded_original_re = new_RE(
    qr'^(ASCII|text|uuencoded|xxencoded|binhex)'i,
    # Checking for banned MIME types and names. If any mail part matches,
    # the whole mail is rejected, much like the way viruses are handled.
    # A list in object $banned_filename_re can be defined to provide a list
    # of Perl regular expressions to be matched against each part's:
    # * Content-Type value (both declared and effective mime-type),
    # including the possible security risk content types
    # message/partial and message/external-body, as specified by rfc2046;
    # * declared (recommended) file names as specified by MIME subfields
    # Content-Disposition.filename and Content-Type.name, both in their
    # raw (encoded) form and in rfc2047-decoded form if applicable;
    # * file content type as guessed by 'file(1)' utility, both the raw result
    # from file(1), as well as short type name, classified into names such as
    # .asc, .txt, .html, .doc, .jpg, .pdf, .zip, .exe, ..., which is always
    # beginning with a dot - see subroutine determine_file_types().
    # This step is done only if $bypass_decode_parts is not true.
    # * leave $banned_filename_re undefined to disable these checks
    # (giving an empty list to new_RE() will also always return false)
    $banned_filename_re = new_RE(
    qr'\.[a-zA-Z][a-zA-Z0-9]{0,3}\.(vbs|pif|scr|bat|com|exe|dll)$'i, # double extension
    # qr'.\.(exe|vbs|pif|scr|bat|com)$'i, # banned extension - basic
    # qr'.\.(ade|adp|bas|bat|chm|cmd|com|cpl|crt|exe|hlp|hta|inf|ins|isp|js|
    # jse|lnk|mdb|mde|msc|msi|msp|mst|pcd|pif|reg|scr|sct|shs|shb|vb|
    # vbe|vbs|wsc|wsf|wsh)$'ix, # banned extension - long
    # qr'^\.(exe|zip|lha|tnef)$'i, # banned file(1) types
    # qr'^application/x-msdownload$'i, # banned MIME types
    # qr'^message/partial$'i, qr'^message/external-body$'i, # rfc2046
    # See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
    # and http://www.cknow.com/vtutor/vtextensions.htm
    # A little trick: a pattern qr'\.exe$' matches both a short type name '.exe',
    # as well as any file name which happens to end with .exe. If only matching
    # a file name is desired, but not the short name, a pattern qr'.\.exe$'i
    # or similar may be used, which requires that at least one character preceeds
    # the '.exe', and so it will never match short file types, which always start
    # with a dot.
    # Section V - Per-recipient and per-sender handling, whitelisting, etc.
    # %virus_lovers, @virus_lovers_acl and $virus_lovers_re lookup tables:
    # (these should be considered policy options, they do not disable checks,
    # see bypas*checks for that!)
    # Exclude certain RECIPIENTS from virus filtering by adding their lower-cased
    # envelope e-mail address (or domain only) to the hash %virus_lovers, or to
    # the access list @virus_lovers_acl - see README.lookups and examples.
    # Make sure the appropriate form (e.g. external/internal) of address
    # is used in case of virtual domains, or when mapping external to internal
    # addresses, etc. - this is MTA-specific.
    # Notifications would still be generated however (see the overall
    # picture above), and infected mail (if passed) gets additional header:
    # X-AMaViS-Alert: INFECTED, message contains virus: ...
    # (header not inserted with milter interface!)
    # NOTE (milter interface only): in case of multiple recipients,
    # it is only possible to drop or accept the message in its entirety - for all
    # recipients. If all of them are virus lovers, we'll accept mail, but if
    # at least one recipient is not a virus lover, we'll discard the message.
    # %bypass_virus_checks, @bypass_virus_checks_acl and $bypass_virus_checks_re
    # lookup tables:
    # (this is mainly a time-saving option, unlike virus_lovers* !)
    # Similar in concept to %virus_lovers, a hash %bypass_virus_checks,
    # access list @bypass_virus_checks_acl and regexp list $bypass_virus_checks_re
    # are used to skip entirely the decoding, unpacking and virus checking,
    # but only if ALL recipients match the lookup.
    # %bypass_virus_checks/@bypass_virus_checks_acl/$bypass_virus_checks_re
    # do NOT GUARANTEE the message will NOT be checked for viruses - this may
    # still happen when there is more than one recipient for a message, and
    # not all of them match these lookup tables. To guarantee virus delivery,
    # a recipient must also match %virus_lovers/@virus_lovers_acl lookups
    # (but see milter limitations above),
    # NOTE: it would not be clever to base virus checks on SENDER address,
    # since there are no guarantees that it is genuine. Many viruses
    # and spam messages fake sender address. To achieve selective filtering
    # based on the source of the mail (e.g. IP address, MTA port number, ...),
    # use mechanisms provided by MTA if available.
    # Similar to lookup tables controlling virus checking, there exist
    # spam scanning, banned names/types, and headers_checks control counterparts:
    # %spam_lovers, @spam_lovers_acl, $spam_lovers_re
    # %banned_files_lovers, @banned_files_lovers_acl, $banned_files_lovers_re
    # %bad_header_lovers, @bad_header_lovers_acl, $bad_header_lovers_re
    # and:
    # %bypass_spam_checks/@bypass_spam_checks_acl/$bypass_spam_checks_re
    # %bypass_banned_checks/@bypass_banned_checks_acl/$bypass_banned_checks_re
    # %bypass_header_checks/@bypass_header_checks_acl/$bypass_header_checks_re
    # See README.lookups for details about the syntax.
    # The following example disables spam checking altogether,
    # since it matches any recipient e-mail address (any address
    # is a subdomain of the top-level root DNS domain):
    # @bypass_spam_checks_acl = qw( . );
    # @bypass_header_checks_acl = qw( [email protected] );
    # @bad_header_lovers_acl = qw( [email protected] );
    # See README.lookups for further detail, and examples below.
    # $virus_lovers{lc("postmaster\@$mydomain")} = 1;
    # $virus_lovers{lc('[email protected]')} = 1;
    # $virus_lovers{lc('[email protected]')} = 1;
    # $virus_lovers{lc('some.user@')} = 1; # this recipient, regardless of domain
    # $virus_lovers{lc('[email protected]')} = 0; # never, even if domain matches
    # $virus_lovers{lc('example.com')} = 1; # this domain, but not its subdomains
    # $virus_lovers{lc('.example.com')}= 1; # this domain, including its subdomains
    #or:
    # @virus_lovers_acl = qw( [email protected] !lab.xxx.com .xxx.com yyy.org );
    # $bypass_virus_checks{lc('[email protected]')} = 1;
    # @bypass_virus_checks_acl = qw( some.ddd !butnot.example.com .example.com );
    # @virus_lovers_acl = qw( [email protected] );
    # $virus_lovers_re = new_RE( qr'(helpdesk|postmaster)@example\.com$'i );
    # $spam_lovers{lc("postmaster\@$mydomain")} = 1;
    # $spam_lovers{lc('[email protected]')} = 1;
    # $spam_lovers{lc('[email protected]')} = 1;
    # @spam_lovers_acl = qw( !.example.com );
    # $spam_lovers_re = new_RE( qr'^user@example\.com$'i );
    # don't run spam check for these RECIPIENT domains:
    # @bypass_spam_checks_acl = qw( d1.com .d2.com a.d3.com );
    # or the other way around (bypass check for all BUT these):
    # @bypass_spam_checks_acl = qw( !d1.com !.d2.com !a.d3.com . );
    # a practical application: don't check outgoing mail for spam:
    # @bypass_spam_checks_acl = ( "!.$mydomain", "." );
    # (a downside of which is that such mail will not count as ham in SA bayes db)
    # Where to find SQL server(s) and database to support SQL lookups?
    # A list of triples: (dsn,user,passw). (dsn = data source name)
    # Specify more than one for multiple (backup) SQL servers.
    # See 'man DBI', 'man DBD::mysql', 'DBD::Pg', ... for details.
    # @lookup_sql_dsn =
    # ( ['DBI:mysql:mail:host1', 'some-username1', 'some-password1'],
    # ['DBI:mysql:mail:host2', 'some-username2', 'some-password2'] );
    # ('mail' in the example is the database name, choose what you like)
    # With PostgreSQL the dsn (first element of the triple) may look like:
    # 'DBI:Pg:host=host1;dbname=mail'
    # The SQL select clause to fetch per-recipient policy settings.
    # The %k will be replaced by a comma-separated list of query addresses
    # (e.g. full address, domain only, catchall). Use ORDER, if there
    # is a chance that multiple records will match - the first match wins.
    # If field names are not unique (e.g. 'id'), the later field overwrites the
    # earlier in a hash returned by lookup, which is why we use '*,users.id'.
    # No need to uncomment the following assignment if the default is ok.
    # $sql_select_policy = 'SELECT *,users.id FROM users,policy'.
    # ' WHERE (users.policy_id=policy.id) AND (users.email IN (%k))'.
    # ' ORDER BY users.priority DESC';
    # The SQL select clause to check sender in per-recipient whitelist/blacklist
    # The first SELECT argument '?' will be users.id from recipient SQL lookup,
    # the %k will be sender addresses (e.g. full address, domain only, catchall).
    # The default value is:
    # $sql_select_white_black_list = 'SELECT wb FROM wblist,mailaddr'.
    # ' WHERE (rid=?) AND (sid=mailaddr.id) AND (mailaddr.email IN (%k))'.
    # ' ORDER BY mailaddr.priority DESC';
    # To disable SQL white/black list, set to undef (otherwise comment-out
    # the following statement, leaving it at the default value):
    $sql_select_white_black_list = undef; # undef disables SQL white/blacklisting
    # If you decide to pass viruses (or spam) to certain recipients using the
    # above lookup tables or using $final_virus_destiny=1, you can set
    # the variable $addr_extension_virus ($addr_extension_spam) to some
    # string, and the recipient address will have this string appended
    # as an address extension to the local-part of the address. This extension
    # can be used by final local delivery agent to place such mail in different
    # folders. Leave these two variables undefined or empty strings to prevent
    # appending address extensions. Setting has no effect on recipient which will
    # not be receiving viruses/spam. Recipients who do not match lookup tables
    # local_domains* are not affected.
    # LDAs usually default to stripping away address extension if no special
    # handling is specified, so having this option enabled normally does no harm,
    # provided the $recipients_delimiter matches the setting on the final
    # MTA's LDA.
    # $addr_extension_virus = 'virus'; # (default is undef, same as empty)
    # $addr_extension_spam = 'spam'; # (default is undef, same as empty)
    # $addr_extension_banned = 'banned'; # (default is undef, same as empty)
    # Delimiter between local part of the recipient address and address extension
    # (which can optionally be added, see variables $addr_extension_virus and
    # $addr_extension_spam). E.g. recipient address <[email protected]> gets changed
    # to <[email protected]>.
    # Delimiter should match equivalent (final) MTA delimiter setting.
    # (e.g. for Postfix add 'recipient_delimiter = +' to main.cf)
    # Setting it to an empty string or to undef disables this feature
    # regardless of $addr_extension_virus and $addr_extension_spam settings.
    $recipient_delimiter = '+'; # (default is '+')
    # true: replace extension; false: append extension
    # $replace_existing_extension = 1; # (default is false)
    # Affects matching of localpart of e-mail addresses (left of '@')
    # in lookups: true = case sensitive, false = case insensitive
    $localpart_is_case_sensitive = 0; # (default is false)
    # ENVELOPE SENDER WHITELISTING / BLACKLISTING - GLOBAL (RECIPIENT-INDEPENDENT)
    # WHITELISTING: use ENVELOPE SENDER lookups to ENSURE DELIVERY from whitelisted
    # senders even if the message is recognized as spam. Effectively, for the
    # specified senders, message RECIPIENTS temporarily become 'spam_lovers', with
    # further processing being the same as otherwise specified for spam lovers.
    # It does not turn off inserting spam-related headers, if they are enabled.
    # BLACKLISTING: messages from specified SENDERS are DECLARED SPAM.
    # Effectively, for messages from blacklisted senders, spam level
    # is artificially pushed high, and the normal spam processing applies,
    # resulting in 'X-Spam-Flag: YES', high 'X-Spam-Level' bar and other usual
    # reactions to spam, including possible rejection. If the message nevertheless
    # still passes (e.g. for spam loving recipients), it is tagged as BLACKLISTED
    # in the 'X-Spam-Status' header field, but the reported spam value and
    # set of tests in this report header field (if available from SpamAssassin,
    # which may have not been called) is not adjusted.
    # A sender may be both white- and blacklisted at the same time,
    # settings are independent. For example, being both white- and blacklisted,
    # message is delivered to recipients, but is tagged as spam.
    # If ALL recipients of the message either white- or blacklist the sender,
    # spam scanning (calling the SpamAssassin) is bypassed, saving on time.
    # The following variables (lookup tables) are available, with the semantics
    # and syntax as specified in README.lookups:
    # %whitelist_sender, @whitelist_sender_acl, $whitelist_sender_re
    # %blacklist_sender, @blacklist_sender_acl, $blacklist_sender_re
    # SOME EXAMPLES:
    #ACL:
    # @whitelist_sender_acl = qw( .example.com );
    # @whitelist_sender_acl = ( ".$mydomain" ); # $mydomain and its subdomains
    # NOTE: This is not a reliable way of turning off spam checks for
    # locally-originating mail, as sender address can easily be faked.
    # To reliably avoid spam-scanning outgoing mail,
    # use @bypass_spam_checks_acl .
    #RE:
    # $whitelist_sender_re = new_RE(
    # qr'^postmaster@.*\bexample\.com$'i,
    # qr'^owner-[^@]*@'i, qr'-request@'i,
    # qr'\.example\.com$'i );
    $blacklist_sender_re = new_RE(
    qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou|greatcasino)@'i,
    qr'^(investments|lose_weight_today|market.alert|money2you|MyGreenCard)@'i,
    qr'^(new\.tld\.registry|opt-out|opt-in|optin|saveonlsmoking2002k)@'i,
    qr'^(specialoffer|specialoffers|stockalert|stopsnoring|wantsome)@'i,
    qr'^(workathome|yesitsfree|your_friend|greatoffers)@'i,
    qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i,
    #HASH lookup variant:
    # NOTE: Perl operator qw splits its argument string by whitespace
    # and produces a list. This means that addresses can not contain
    # whitespace, and there is no provision for comments within the string.
    # You can use the normal Perl list syntax if you have special requirements,
    # e.g. map {...} ('one user@bla', '.second.com'), or use read_hash to read
    # addresses from a file.
    # a hash lookup table can be read from a file,
    # one address per line, comments and empty lines are permitted:
    # read_hash(\%whitelist_sender, '/var/amavis/whitelist_sender');
    # ... or set directly:
    # $whitelist_sender{''} = 1; # don't spam-check MTA bounces
    map { $whitelist_sender{lc($_)}=1 } (qw(
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    returns.groups.yahoo.com
    # ENVELOPE SENDER WHITELISTING / BLACKLISTING - PER-RECIPIENT
    # The same semantics as for global white/blacklisting applies, but this
    # time each recipient (or its domain, or subdomain, ...) can be given
    # an individual lookup table for matching senders. The per-recipient lookups
    # override the global lookups, which serve as a fallback default.
    # Specify a two-level lookup table: the key for the outer table is recipient,
    # and the result should be an inner lookup table (hash or ACL or RE),
    # where the key used will be the sender.
    #$per_recip_blacklist_sender_lookup_tables = {
    # '[email protected]'=>new_RE(qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i),
    # '[email protected]'=>[qw( [email protected],org .d2.example,org )],
    #$per_recip_whitelist_sender_lookup_tables = {
    # '[email protected]' => [qw( [email protected] .other.example.org )],
    # '.my1.example.com' => [qw( !foe.other.example,org .other.example,org )],
    # '.my2.example.com' => read_hash('/var/amavis/my2-wl.dat'),
    # 'abuse@' => { 'postmaster@'=>1,
    # '[email protected]'=>1, '[email protected]'=>1 },
    # Section VI - Resource limits
    # Sanity limit to the number of allowed recipients per SMTP transaction
    # $smtpd_recipient_limit = 1000; # (default is 1000)
    # Resource limitations to protect against mail bombs (e.g. 42.zip)
    # Maximum recursion level for extraction/decoding (0 or undef disables limit)
    $MAXLEVELS = 14; # (default is undef, no limit)
    # Maximum number of extracted files (0 or undef disables the limit)
    $MAXFILES = 1500; # (default is undef, no limit)
    # For the cumulative total of all decoded mail parts we set max storage size
    # to defend against mail bombs. Even though parts may be deleted (replaced
    # by decoded text) during decoding, the size they occupied is _not_ returned
    # to the quota pool.
    # Parameters to storage quota formula for unpacking/decoding/decompressing
    # Formula:
    # quota = max($MIN_EXPANSION_QUOTA,
    # $mail_size*$MIN_EXPANSION_FACTOR,
    # min($MAX_EXPANSION_QUOTA, $mail_size*$MAX_EXPANSION_FACTOR))
    # In plain words (later condition overrules previous ones):
    # allow MAX_EXPANSION_FACTOR times initial mail size,
    # but not more than MAX_EXPANSION_QUOTA,
    # but not less than MIN_EXPANSION_FACTOR times initial mail size,
    # but never less than MIN_EXPANSION_QUOTA
    $MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
    $MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
    $MIN_EXPANSION_FACTOR = 5; # times original mail size (must be specified)
    $MAX_EXPANSION_FACTOR = 500; # times original mail size (must be specified)
    # Section VII - External programs, virus scanners
    # Specify a path string, which is a colon-separated string of directories
    # (no trailing slashes!) to be assigned to the environment variable PATH
    # and to serve for locating external programs below.
    # NOTE: if $daemon_chroot_dir is nonempty, the directories will be
    # relative to the chroot directory specified;
    $path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';
    # Specify one string or a search list of strings (first match wins).
    # The string (or: each string in a list) may be an absolute path,
    # or just a program name, to be located via $path;
    # Empty string or undef (=default) disables the use of that external program.
    # Optionally command arguments may be specified - only the first substring
    # up to the whitespace is used for file searching.
    $file = 'file'; # file(1) utility; use 3.41 or later to avoid vulnerability
    $gzip = 'gzip';
    $bzip2 = 'bzip2';
    $lzop = 'lzop';
    $uncompress = ['uncompress', 'gzip -d', 'zcat'];
    $unfreeze = ['unfreeze', 'freeze -d', 'melt', 'fcat'];
    $arc = ['nomarch', 'arc'];
    $unarj = ['arj', 'unarj']; # both can extract, same options
    $unrar = ['rar', 'unrar']; # both can extract, same options
    $zoo = 'zoo';
    $lha = 'lha';
    $cpio = 'cpio';
    # SpamAssassin settings
    # $sa_local_tests_only is passed to Mail::SpamAssassin::new as a value
    # of the option local_tests_only. See Mail::SpamAssassin man page.
    # If set to 1, no tests that require internet access will be performed.
    $sa_local_tests_only = 1; # (default: false)
    #$sa_auto_whitelist = 1; # turn on AWL (default: false)
    $sa_mail_body_size_limit = 64*1024; # don't waste time on SA if mail is larger
    # (less than 1% of spam is > 64k)
    # default: undef, no limitations
    # default values, can be overridden by more specific lookups, e.g. SQL
    $sa_tag_level_deflt = -999; # add spam info headers if at, or above that level
    $sa_tag2_level_deflt = 3.0; # add 'spam detected' headers at that level
    $sa_kill_level_deflt = 22.0;
    #$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
    # at or above that level: bounce/reject/drop,
    # quarantine, and adding mail address extension
    # The $sa_tag_level_deflt, $sa_tag2_level_deflt and $sa_kill_level_deflt
    # may also be hashrefs to hash lookup tables, to make static per-recipient
    # settings possible without having to resort to SQL or LDAP lookups.
    # a quick reference:
    # tag_level controls adding the X-Spam-Status and X-Spam-Level headers,
    # tag2_level controls adding 'X-Spam-Flag: YES', and editing Subject,
    # kill_level controls 'evasive actions' (reject, quarantine, extensions);
    # it only makes sense to maintain the relationship:
    # tag_level <= tag2_level <= kill_level
    # string to prepend to Subject header field when message exceeds tag2 level
    $sa_spam_subject_tag = '*** JUNK MAIL ***'; # (defaults to undef, disables)
    # (only seen when spam is not to be rejected
    # and recipient is in local_domains*)
    $sa_spam_modifies_subj = 1; # may be a ref to a lookup table, default is true
    # Example: modify Subject for all local recipients except [email protected]
    #$sa_spam_modifies_subj = [qw( [email protected] . )];
    # @av_scanners is a list of n-tuples, where fields semantics is:
    # 1. av scanner plain name, to be used in log and reports;
    # 2. scanner program name; this string will be submitted to subroutine
    # find_external_programs(), which will try to find the full program
    # path name; if program is not found, this scanner is disabled.
    # Besides a simple string (full program path name or just the basename
    # to be looked for in PATH), this may be an array ref of alternative
    # program names or full paths - the first match in the list will be used;
    # As a special case for more complex scanners, this field may be
    # a subroutine reference, and the whole n-tuple is passed to it as args.
    # 3. command arguments to be given to the scanner program;
    # a substring {} will be replaced by the directory name to be scanned,
    # i.e. "$tempdir/parts"
    # 4. an array ref of av scanner exit status values, or a regexp (to be
    # matched against scanner output), indicating NO VIRUSES found;
    # 5. an array ref of av scanner exit status values, or a regexp (to be
    # matched against scanner output), indicating VIRUSES WERE FOUND;
    # Note: the virus match prevails over a 'not found' match, so it is safe
    # even if 4. matches for viruses too;
    # 6. a regexp (to be matched against scanner output), returning a list
    # of virus names found.
    # 7. and 8.: (optional) subroutines to be executed before and after scanner
    # (e.g. to set environment or current directory);
    # see examples for these at KasperskyLab AVP and Sophos sweep.
    # NOTES:
    # - NOT DEFINING @av_scanners (e.g. setting it to empty list, or deleting the
    # whole assignment) TURNS OFF LOADING AND COMPILING OF THE ANTIVIRUS CODE
    # (which can be handy if all you want to do is spam scanning);
    # - the order matters: although _all_ available entries from the list are
    # always tried regardless of their verdict, scanners are run in the order
    # specified: the report from the first one detecting a virus will be used
    # (providing virus names and scanner output); REARRANGE THE ORDER TO WILL;
    # - it doesn't hurt to keep an unused command line scanner entry in the list
    # if the program can not be found; the path search is only performed once
    # during the program startup;
    # CORROLARY: to disable a scanner that _does_ exist on your system,
    # comment out its entry or use undef or '' as its program name/path
    # (second parameter). An example where this is almost a must: disable
    # Sophos 'sweep' if you have its daemonized version Sophie or SAVI-Perl
    # (same for Trophie/vscan, and clamd/clamscan), or if another unrelated
    # program happens to have a name matching one of the entries ('sweep'
    # again comes to mind);
    # - it DOES HURT to keep unwanted entries which use INTERNAL SUBROUTINES
    # for interfacing (where the second parameter starts with \&).
    # Keeping such entry and not having a corresponding virus scanner daemon
    # causes an unnecessary connection attempt (which eventually times out,
    # but it wastes precious time). For this reason the daemonized entries
    # are commented in the distribution - just remove the '#' where needed.
    @av_scanners = (
    # ### http://www.vanja.com/tools/sophie/
    # ['Sophie',
    # \&ask_daemon, ["{}/\n", '/var/run/sophie'],
    # qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
    # qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
    # ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
    # ['Sophos SAVI', \&sophos_savi ],
    # ### http://clamav.elektrapro.com/
    # ['Clam Antivirus-clamd',
    # \&ask_daemon, ["CONTSCAN {}\n", '/var/amavis/clamd'],
    # qr/\bOK$/, qr/\bFOUND$/,
    # qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
    # # NOTE: run clamd under the same user as amavisd,
    # # match the socket name in clamav.conf to the socket name in this entry
    # ### http://www.openantivirus.org/
    # ['OpenAntiVirus ScannerDaemon (OAV)',
    # \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
    # qr/^OK/, qr/^FOUND: /, qr/^FOUND: (.+)/ ],
    # ### http://www.vanja.com/tools/trophie/
    # ['Trophie',
    # \&ask_daemon, ["{}/\n", '/var/run/trophie'],
    # qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
    # qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
    # ### http://www.f-prot.com/
    # ['FRISK F-Prot Daemon',
    # \&ask_daemon,
    # ["GET {}/*?-dumb%20-archive HTTP/1.0\r\n\r\n",
    # ['127.0.0.1:10200','127.0.0.1:10201','127.0.0.1:10202',
    # '127.0.0.1:10203','127.0.0.1:10204'] ],
    # qr/(?i)<summary[^>]*>clean<\/summary>/,
    # qr/(?i)<summary[^>]*>infected<\/summary>/,
    # qr/(?i)<name>(.+)<\/name>/ ],
    ['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp','kavscanner'],
    "-* -P -B -Y -O- {}", [0,3,8], [2,4], # any use for -A -K ?
    qr/infected: (.+)/,
    sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
    sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
    ['KasperskyLab AVPDaemonClient',
    [ '/opt/AVP/kavdaemon', 'kavdaemon',
    '/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
    '/opt/AVP/AvpTeamDream', 'AvpTeamDream',
    '/opt/AVP/avpdc', 'avpdc' ],
    '{}', [0,8], [3,4,5,6], qr/infected: ([^\r\n]+)/ ],
    # change the startup-script in /etc/init.d/kavd to:
    # DPARMS="-I0 -Y -* /var/amavis"
    # adjusting /var/amavis above to match your $TEMPBASE.
    # NOTE: cd /opt/AVP/DaemonClients; configure; cd Sample; make
    # cp AvpDaemonClient /opt/AVP/
    ### http://www.hbedv.com/ or http://www.centralcommand.com/
    ['H+BEDV AntiVir or CentralCommand Vexira Antivirus',
    ['antivir','vexira'],
    '--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/,
    qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
    (?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/ ],
    # NOTE: remove the -z if you only have a demo version
    ### http://www.commandsoftware.com/
    ['Command AntiVirus for Linux', 'csav',
    '-all -archive -packed {}', [50], [51,52,53],
    qr/Infection: (.+)/ ],
    ### http://www.symantec.com/
    ['Symantec CarrierScan via Symantec CommandLineScanner',
    ['cscmdline','savsecls'],
    '-a scan -i 1 -v -s 127.0.0.1:7777 {}',
    qr/Files Infected: 0/, qr/^Infected: /,
    qr/Info:\s+(.+)/ ],
    ### http://drweb.imshop.de/
    ['DrWeb Antivirus for Linux/FreeBSD/Solaris', 'drweb',
    '-al -ar -fm -go -ha -ml -ot -sd -up {}',
    [0], [1], sub {('no-name')} ],
    ### http://www.f-secure.com/products/anti-virus/
    ['F-Secure Antivirus', 'fsav',
    '--dumb --archive {}', [0], [3,8],
    qr/(?:infection|Infected): (.+)/ ],
    ['CAI InoculateIT', 'inocucmd',
    '-sec -nex {}', [0], [100],
    qr/was infected by virus (.+)/ ],
    ['MkS_Vir for Linux (beta)', ['mks32','mks'],
    '-s {}/*', [0], [1,2],
    qr/--[ \t]*(.+)/ ],
    ['MkS_Vir daemon',
    'mksscan', '-s -q {}', [0], [1..7],
    qr/^... (\S+)/ ],
    ### http://www.nod32.com/
    ['ESET Software NOD32', 'nod32',
    '-all -subdir+ {}', [0], [1,2],
    qr/^.+? - (.+?)\s*(?:backdoor|joke|trojan|virus|worm)/ ],
    ### http://www.nod32.com/
    ['ESET Software NOD32 - Client/Server Version', 'nod32cli',
    '-a -r -d recurse --heur standard {}', [0], [10,11],
    qr/^\S+\s+infected:\s+(.+)/ ],
    ### http://www.norman.com/products_nvc.shtml
    ['Norman Virus Control v5 / Linux', 'nvccmd',
    '-c -l:0 -s -u {}', [0], [1],
    qr/(?i).* virus in .* -> \'(.+)\'/ ],
    ### http://www.pandasoftware.com/
    ['Panda Antivirus for Linux', ['pavcl','pavc'],
    '-aut -aex -heu -cmp -nor -nso -eng {}',
    qr/Number of files infected\.*: 0(?!\d)/,
    qr/Number of files infected\.*: 0*[1-9]/,
    qr/Found virus :\s*(\S+)/ ],
    # Check your RAV license terms before fiddling with the following two lines!
    # ['GeCAD RAV AntiVirus 8', 'ravav',
    # '--all --archive --mail {}', [1], [2,3,4,

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • Access 2010, Sharepoint 2010 issue with adding field to access db table

    I needed to add an additional field to one of my access tables contained in the sharepoint list. 
    My application is a front end Access DB (run locally), and the backend is the 'data' database contained in the sharepoint lists.
    I added the field to the database (called BOM).  When I open the access list (from sharepoint) , and also look at the database in access, the field is there and things are fine.
    However, it does not show up in my linked front end.  I deleted the linked sharepoint tables from my front end, and then re-imported.  Now I see the BOM field I created, but it has replaced the 'ID' field, which was the primary key.  I had
    added the 'BOM' field as the last field in the table.  Now it is the first field, having replaced the 'ID' field. 
    What's going on here? 
    Thanks in advance!

    Hi,
    This is the forum to discuss questions and feedback for Microsoft Office, and the issue more related to Sharepoint 2010, I'll move your question to the Sharepoint 2010 forum
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/home?forum=sharepointgeneralprevious
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    George Zhao
    TechNet Community Support

  • Issue with the site level access in the trial ac

    I am following the given video to get an understanding of site level access.
    SAP HANA Cloud Portal Setting Access Levels in the Site - YouTube
    I could not find the option of setting the site level access to either public, restricted or private in my trial ac. in the site settings as per the given video above. Could this be some authorization issue or some settings that needs to be done.

    Hello,
    The site access level configuration is now under the Access Managment entry in the side panel.
    Please follow the documentation in the link below.
    SAP HANA Cloud Portal Documentation
    Regards,
    Eliel.

  • Archive Complete, but delete job not scheduled. Issue with Archives now

    As someone tried at work to schedule archive/delete process, we are finding issues now.
    We have job scheduled for Archive but not delete. The job is archiving the messages, Meanwhile because of the growing disk space, folks deleted the archive files.
    Now Archive is Complete, but with out Deletion.
    So how do we start from scratch again
    Also if I understood correctly after deleting the infostructure the session goes into error/red light since we can no longer build the related data from the archives due to the missing infostructures right?

    Dear friend of XI,
    I fully understand the issue; sure you cannot use RSXMB_DELETE_ARCHIVED_MESSAGES as the archive files have been deleted.
    Tha paradigma of archving is that once the write phase is complete the deletion phse must complete at any rate. As this is impossible for the deleted archive files there is no way in the standard to erase the incomplete archive runs from management overview in SARA. In case you would like to clear the entries in SARA please open an OSS message such that SAP can take a look into the affected system and evaluate an individual solution for you.
    irrespective of whether you clear the management entries in SARA you can simply run another archive session. Please note that the interfaces action (field ITFACTION) reflects the action to be taken for an indivirual message. It does not depict a state, in particular it does not mean that the message has been archived already. The interface action is determined right when the mesage enters the Integration Server. Contrary, the information on whether the message has been archived alteady (or still needs to) is stored in a different statuis field.
    Best regards,
    Harald Keimer

  • Issues with N80. Need help badly!!

    I got my N80 as a gift a week ago. It was purchased in dubai ( which is in the middle east). 2 days ago i transferred some files from my phone to the computer and ever since the next morning my phones been acting weird. applications close, its slow, battery life is really bad (like 5 hours), my signal bar and batter life bar disappear for a while and the phone powers off by itself. Today I removed the memory card and tried the phone and it seems to be working fine now and I am not having any issues. I am assuming and hoping that the card got affected when i was uploading the files from my phone and that there is no problem with the phone. I have been advised to send the phone back to the middle east to get it checked and possibly repaired. this is something I dont want to do at the moment because i like the phone and it will be a long time before i get it back. My question is if anyone else has had a similar problem, is it the memory card that is faulty and should I just get a new card or should I actually send the phone back to get it checked totally, in case its the phone that is faulty? also I have read that a new firmware is out. Can i get that off the net or it has to be uploaded at a local service centre ( which unfortunately is in the middle east again and not in Canada where I am at the moment)? The firmware on my phone is V 3.0617.0.6 and was updated on 03-05-06 RM-92 Nokia N80 (08). Is this firmware ok for now as I will be going to the middle east in december and can get it done then. Or should i just send the phone now and get the firmware updated and also get the memory card problem sorted out?

    07-Sep-2006
    07:07 AM
    manta wrote:
    I have not experienced similar behaviour, but if you connected phone via cable to a PC and used the data transfer mode to move the files to PC, that equals to mass storage mode that shows the memory card as expernal memory in Windows Explorer and it is important to remove the phone then safely using the remove harware option in Windows, di dyou do that ?
    If not, the memory card can get corrupted and corrupted memory card can mak the phone behave badly.
    I would just go and buy a new memory card and then when connecting to PC always use the safe removal before disconnecing the phone.
    Or install PC Suite, the´connection method is different and no safe removal needed.
    I did use PC suite while transferring the files which makes it even more weirder. But yes i did not do that safely remove hardware thing. I thought that it wouldnt be needed since im using PC suite. do u have any idea about the firmware? should i get it updated now back in dubai or wait till i go back myself in december?

  • Issue with shared services - Need Urgent Help please!!

    Hello Experts
    One of my customer has installed a new instance of oracle and copied all the schemas and data over to the new instance.
    Now when they bring up shared services, have lost all our provisioning. None of the projects are recognized by shared serices and gets the following error when we try to bring up a user
    'xxxxx' is not a recognized Shared Services project. Please contact your adminstrator
    Is there something we need to do to restore Shared Services to its original state?
    Thanks in advance.
    Regards,
    Sonu
    Edited by: 637223 on Jan 20, 2009 2:19 AM

    hi,
    I doubt that "creating a new instance of oracle and copied all the schemas and data over to the new instance" will register the project with shared service and thats why giving error. Because when you install shared service, it asks you about the database name (oracle in your case) to register with. So even if you overwrite that database by new instance it gives error.
    Have you tried the configuration utilty ? Over there you can provide the new database instanse as your database and configure your shared service. Remember that you need to do a complete configuration of shared service , analytic administration services and analytic services. After configuring, Restart the system.....it should work.
    Hope this helps!
    Regards,
    James

  • Created multiple websites with iwebsites, now need to save multiple domains

    I have created multiple websites with iwebsites on iweb 06, now I want to save these sites so in case there is any problems when I upgrade to 08. How do I do this?

    Hello Paul,
    You need to locate the Domain files for each website. You should find these under your account (the house icon in the finder)/Library/Application Support/iWeb.
    Vonz.

  • Serious Issue with Linkage..Need help ASAP!

    OK, I have big deadline for Monday and I can't figure this
    out. I have a bunch of movieclips that are set up with linkage for
    actionscript and set to export in first frame. Everything was fine
    and dandy for a week. Now all of a sudden Flash hangs when I try to
    export the swf. If I turn off the export in first frame everything
    is fine. The problem then is that my move clips aren't available
    for the attachmovie call. What I don't understand is why it was
    fine, then all of a sudden this happened for no apparent reason.
    Has anyone got a workaround or solution for this? I need help with
    this ASAP. Thanks.
    --Paul

    Sadly nothing you can do. The file must be corrupted.
    sometimes files that need saving corrupt themselves (product of
    voltage variations or some other physical things) making some
    objects "BAD", maybe you can save your work if you determine what
    is the only object that is corrupting all the file and delete and
    and redraw it.

  • Having Issues with E1000 as an Access Point setup - Please Help

    Quick background - Using an E2000 as my main router for a DSL connection (using an ISP provided Zyxel 660HW modem with wireless disabled if that matters). I have an E1000 that I want to setup as a LAN to LAN connection to the E2000 at the far end of the house and two floors down to extend my network.
    I am pretty network saavy and thought this would be a snap. But I am running into trouble and hoping someone can assist.
    Here are the steps I took:
    1. I ran a CAT 5 connection down to the basement where the E1000 is to be setup.
    2. I hard reset the E1000 to factory defaults
    3. I connected my notebook to the E1000 via a LAN port. At this stage the E1000 is NOT on the network
    4. I configured the E1000 with an IP of 192.168.1.2 - my main router (E2000) is set to 192.168.1.1 and the IP ranges start at .100 so this should present no conflicts
    5. I disabled DHCP
    6. I disabled NAT
    7. I saved settings and rebooted router
    8. I removed connection to notebook and plugged in the CAT 5 run from the E2000 - LAN port 1 on both (no WAN/Internet port used)
    At this stage I expected the E1000 to act as an Access Point but it is not functioning properly. The first thing I notice is that the E1000 that should now be the AP is broadcasting the router name (something like Cisco 54653) even though this is not a broadcast SSID but only the router name. That is odd, I believe.
    I have tried rebooting both the E2000 and E1000 along with the modem, no luck. I have tried different IPs for the E1000 just in case but again no luck, the wireless is not extended.
    Any advice or guidance? Am I doing something wrong?
    Any help is appreciated.
    Solved!
    Go to Solution.

    It sounds like you have configured the E1000 properly, but you didn't describe how you have configured the Zyxel and E2000.
    Do you have A or B ?
    A.  Zyxel set to full bridge mode.  Then connect Zyxel to E2000's internet port and configure E2000 for PPPoE internet connection type (and DHCP server enabled and NAT enabled). Change MTU to manual on E2000 and enter 1492.  And then connect your E1000 as you described.  Internet connection type on E1000 is AutoconfigDHCP.
    B. Zyxel is configured as modem/router (DHCP server enabled and NAT enabled).  Then connect Zyxel to E2000's internet port.  E2000 is configured as router (DHCP server is enabled and NAT is enabled) and local IP address is 192.168.2.1.  Internet connection type on E2000 would be AutoconfigDHCP.  E1000 is configured as you described except local ip address is 192.168.2.2.  Internet connection type on E1000 is AutoconfigDHCP.
    http://support.earthlink.net/articles/dsl/zyxel-p660rd1-how-to-set-the-modem-for-bridge-mode.php

  • Recurring Read/Write Issues (1 year now) - NEED FIX

    My Macbook Pro Mid-2009 had a hard drive issue -- lots of weird errors, unclear. Essentially, switched out the hard drive for a brand new one, did a clean install on a 1TB 7200 RPM Hitachi HD. Continued to throw errors when trying to read/write so I was told the hard drive may have been defective out of box.
    Since then, have replaced it with another 1TB 7200 RPM, then a 512GB 7200RPM and now finally a 320GB 5400RPM. ALL CLEAN INSTALLS. Still getting errors -- at this point, I'm being told when trying to Download Chrome that there is no room available when in reality there is ~300GB free, and when trying to change permissions to the Downloads folder am seeing "An unexpected error occurred (error code -50).
    I've been to the Mac Store ~8 times about this already and still no fixes. One suggestion was maybe the Hard Drive Cable is broken? I had it replaced in 2012. Thoughts? Is there any way to check this?

    Hi,
      paramErr                 
    = -50,  /*error in user parameter list*/
    It's not formatted Case Sensitive is it?
    Sounds like other HW problem like RAM, Logic Board, cable, etc.

Maybe you are looking for