Ecc6 on windows 2003 db2 v9.1 ,db13 backup error

Below is the log :
1.Step 001 started (program RSDBAJOB, variant &0000000000032, user ID SAP*)
2.Execute logical command DB6_DBBACKUP On host gwdb2ides
3.Parameters:C11 ONLINE TO
. ape0 BUFFERS 0 4.BUFFERSIZE 0 PARALLELISM 0 INCLUDE LOGS
5.set connect partition: 0
6.Initializing tape...
7.Command: "db2 initialize tape on
. ape0 using 1024"
8.DB21060E Ò»######Ï¡#
9.External program terminated with exit code 2
10.DB6_DBBACKUP returned error status E
Please check attachment . i check error code db21060E . it means block size error , tape is LTO-3 800-1600G .
how to do .thanks .....

>
jun jie ruan wrote:
> The same error message ,below is the screenshot
> http://www.rongyj.com/er1.jpg
> i check the full backup command is
> dmdb6bkp C11 ONLINE TO
.\tape0 BUFFERS 0 BUFFERSIZE 0 PARALLELISM 0 INCLUDE LOGS
>
> backup setting
> http://www.rongyj.com/er2.jpg
>
> and i can run dmdb6bkp c11 online to
.\tape0 in the db2cmd
>
> Edited by: jun jie ruan on Sep 10, 2008 9:44 AM
Just curious.. have you try to put buffersize 1024, as you init your tape with 1024 , to speed it put 2 buffer .

Similar Messages

Install ECC6 in Windows 2003 server Spanish

opinion about install ECC6 in windows 2003 standar in spanish.
thanks.

Hi Consultor
I'm from mexico, an our experience is:
1) Install in english language as default
2) With the Transaction code I18N and SMLT, you could add the spanish language.
3) Set default language as Spanish in the profiles
Check the parameters: zcsa/installed_languages and zcsa_system_language
Please reward points if helpful
Regards

Hardware migration - Windows 2003 DB2

Hello Experts,
We are planning a hardware migration from our present setup consisting of Windows 2003 Standard with DB2 to Windows 2003 Enterprise with DB2.
I would like your suggestions on the following points:
1] Which method of migration should be used
- system copy (migration creating export files)
- database backup and restore
2] What all optimization steps can be followed before and after the migration
Waiting for your valuable suggestions.
Thank you & Kind regards

Hello
you speak about a simple homogeneous system copy (because you do not change the dabase type - DB2 to Oracle for exemple - or the OS - Windows to Unix)
To ways to perform that :
- if you do not change the server, may be a simple upgrade of the OS is sufficent
http://technet.microsoft.com/en-us/library/cc737287.aspx
- if you change the server, you can perform the upgrade by :
1. making a full offline backup of the source system (database)
2. performing the sapinst (homogeneous copy / backup/restore)
The sapinst will help you (asking you to restore the data)
The steps are :
installing the Oracle binaries
installing SAP with sapinst (binaries)
restoring DB2 database (with the offline backup)
restarting DB2 (I don't know DB2 specific steps)
ending installation
Let see the documentation
service.sap.com/instguides
Note 389530 (for other releases search for the relevant note)
Hope this will help you

Db13 backup error with mssql as database

Hi
While scheduling the backup through db13 i got the following error msg.i mdoing the backup on disk
Task information ***********
Jobname:
SAP CCMS Full DB Backup of DEV,master,msdb [20090825163455]
Taskname: Step1
Type:      TSQL
DB-Name:   DEV
Lastrun:   20090826 07:00:01
Nextrun:   not scheduled
Created:   2009-08-25 16:34:55.
Command:    dev.sap_backup_databases
             @dblist="DEV,master,msdb",@r3db="DEV",@bdev="db1
           3 backup",@unload=0,@verify=0,@jobname= "SAP CCMS
           Full DB Backup of DEV,master,msdb [20090825163455]
Descript: SAP CCMS JOB
Task history information ***********
For run:   20090826 07:00:00
Status:    0          (failure)   (see DB error log)
Message:   156
Severity: 15
Duration: 0 hours, 0 minutes, 0 seconds
Duration: 0 hours, 0 minutes, 0 seconds
Last msg: Executed as user: NT AUTHORITY\SYSTEM. DBCC execut
           ion completed. If DBCC printed error messages, con
           tact your system administrator. [SQLSTATE 01000] (
           Message 2528) Incorrect syntax near the keyword '
           WITH'. [SQLSTATE 42000] (Error 156). The step failed.
i have set the backup device name as db13 backup. is that the problem.
Plz help me

Hi Pranav,
Could you please tell us what was the issue so that if any body face the issue again then he will get help from this thread.
Regards
Ashok Dalai

DB13 Backup Error

Hi,
              I am trying to take online backup by DB13, I got the below error anyone please help this error.
[Normal] From: BSM@backup "sap_ECC_GPR_online_full" Time: 3/17/2011 2:06:01 AM
     OB2BAR application on "192.168.1.101" successfully started.
BR0051I BRBACKUP 7.00 (39)
BR0262I Enter database user name[/password]:
BR0055I Start of database backup: beflmamh.anf 2011-03-17 02.09.11
BR0484I BRBACKUP log file: /oracle/GPR/sapbackup/beflmamh.anf
BR0280I BRBACKUP time stamp: 2011-03-17 02.09.11
BR0301E SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT oragpr/*********'
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance GPR failed
BR0280I BRBACKUP time stamp: 2011-03-17 02.09.11
BR0301E SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT oragpr/*********'
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance GPR failed
BR0056I End of database backup: beflmamh.anf 2011-03-17 02.09.11
BR0280I BRBACKUP time stamp: 2011-03-17 02.09.11
BR0054I BRBACKUP terminated with errors
[Major] From: OB2BAR_OMNISAP@gcldevqasecc2 "OMNISAP" Time: 03/17/11 02:09:11
     BRBACKUP /usr/sap/GPR/SYS/exe/run/brbackup -t online -d util_file -c -m all -u oragpr/********* returned 3
[Normal] From: BMA@backup "HP:Ultrium 4-SCSI_1" Time: 3/17/2011 2:06:44 AM
     STARTING Media Agent "HP:Ultrium 4-SCSI_1"
BR0002I BRARCHIVE 7.00 (39)
BR0262I Enter database user name[/password]:
BR0006I Start of offline redo log processing: aeflmamh.cds 2011-03-17 02.09.11
BR0484I BRARCHIVE log file: /oracle/GPR/saparch/aeflmamh.cds
BR0280I BRARCHIVE time stamp: 2011-03-17 02.09.12
BR0301W SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT oragpr/*********'
ORA-01017: invalid username/password; logon denied
BR0310W Connect to database instance GPR failed
BR0280I BRARCHIVE time stamp: 2011-03-17 02.09.12
BR0301W SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT oragpr/*********'
ORA-01017: invalid username/password; logon denied
BR0310W Connect to database instance GPR failed
BR0280I BRARCHIVE time stamp: 2011-03-17 02.09.14
BR0301W SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT oragpr/*********'
ORA-01017: invalid username/password; logon denied
BR0310W Connect to database instance GPR failed
BR0031I Probably the redo log sequence number of database instance GPR was reset
BR0013W No offline redo log files found for processing
BR0280I BRARCHIVE time stamp: 2011-03-17 02.09.16
BR0301W SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT oragpr/*********'
ORA-01017: invalid username/password; logon denied
BR0310W Connect to database instance GPR failed
BR0007I End of offline redo log processing: aeflmamh.cds 2011-03-17 02.09.16
BR0280I BRARCHIVE time stamp: 2011-03-17 02.09.16
BR0004I BRARCHIVE completed successfully with warnings
[Normal] From: OB2BAR_BACKINT@gcldevqasecc2 "GPR" Time: 03/17/11 02:09:27
     Backint is started with the following parameters backint -u GPR -f backup -i /var/opt/omni/tmp/cftmpfile_GPR -t file -c.
[Normal] From: BMA@backup "HP:Ultrium 4-SCSI_1" Time: 3/17/2011 2:06:48 AM
     By: UMA@backup@Changer0:0:2:1
     Loading medium from slot 7 to device Tape0:0:2:0C
[Normal] From: OB2BAR_SAPBACK@gcldevqasecc2 "GPR" Time: 3/17/2011 2:10:42 AM
     Starting OB2BAR Backup: 192.168.1.101:GPR.0 "SAP"
[Normal] From: OB2BAR_SAPBACK@gcldevqasecc2 "GPR" Time: 03/17/11 02:10:42      Starting OB2BAR Backup: 192.168.1.101:GPR.0 "SAP"
#SAVED 20110317.0004.00 /var/opt/omni/tmp/cntrl_GPR.dbf
[Normal] From: OB2BAR_SAPBACK@gcldevqasecc2 "GPR" Time: 3/17/2011 2:12:07 AM
     Completed OB2BAR Backup: 192.168.1.101:GPR.0 "SAP"
[Normal] From: OB2BAR_SAPBACK@gcldevqasecc2 "GPR" Time: 03/17/11 02:12:07      Completed OB2BAR Backup: 192.168.1.101:GPR.0 "SAP"
[Normal] From: OB2BAR_BACKINT@gcldevqasecc2 "GPR" Time: 03/17/11 02:12:07
     Backint exits with the code (0).
[Normal] From: BSM@backup "sap_ECC_GPR_online_full" Time: 3/17/2011 2:09:01 AM
     OB2BAR application on "192.168.1.101" disconnected.
[Normal] From: BMA@backup "HP:Ultrium 4-SCSI_1" Time: 3/17/2011 2:10:26 AM
     Tape0:0:2:0C
     Medium header verification completed, 0 errors found
[Normal] From: BMA@backup "HP:Ultrium 4-SCSI_1" Time: 3/17/2011 2:10:48 AM
     By: UMA@backup@Changer0:0:2:1
     Unloading medium to slot 7 from device Tape0:0:2:0C
[Normal] From: BMA@backup "HP:Ultrium 4-SCSI_1" Time: 3/17/2011 2:11:10 AM
     ABORTED Media Agent "HP:Ultrium 4-SCSI_1"
[Normal] From: BSM@backup "sap_ECC_GPR_online_full" Time: 3/17/2011 2:11:10 AM
Please help on this error.
Best Regards,
K.Kalees

Hi,
> ORA-01017: invalid username/password; logon denied
Find this thread,
[ORA-01017: invalid username/password; logon denied;
Thanks
Siva

DB13 backup errors BR0301E SQL error -12547

Hi All,
We are scheduling Backup using DB13 but its throwing errors
19.09.2014
10:35:31
BR0301E SQL error -12547 at location BrDbConnect-2, SQL statement:
Please find the attached screenshot.
Any help appreciated...
Regards,
Videesh

Hi Videesh,
Please follow SAP Note 505630 - Composite SAP Note ORA-12547
Regards,
Gaurav

Import ECC6 using DB2 9.5 in Windows 2003 server got error in Phase Insatlla database soft ware .

Hi Expert,
When i am going to import ECC6 in windows 2003 server using DB9.5 i got error in phase Install data base software like below.
Invalid command line argument. consult the windows installer SDK for detailed command line help.
Please help me for this error.
Thanks in Advance.
Thanks
J Jana

'invalid command line argument' - Most probably the SAPinst is not able to find the right path for the DB2 UDB DVD or the the argument is too long to interpret which is a very common problem during installations.
Check the path for db2 DVD, and keep it shorter - that means you have to reduce the number of folders where the DVD resides. Copy the DVD in a short path let's say C:\DB2\dvdname and re-try installation by giving the new path of dvd in SAPinst.
Thank you.

CF 9 on Windows 2003 installation problem

We've been trying to upgrade CF MX 7.02 (multiserver) to CF 9 on Windows 2003 and installation ended with 2 errors:
Install JRE:           C:\JRun4\jre
                           Status: ERROR
                           Additional Notes: ERROR - Error Copying the JRE to the destination directory
                                             ZeroGlq: Target file was read only or did not have write permissions and was not overwritten
Web Server Connector Configuration Error
                           Status: ERROR
                           Additional Notes: ERROR - JNDI port 2904 for server cfusion is not active
Now Windows can not start JRun CFusion service there at all.
The most weird thing is that we seem to be unable to uninstall what got installed of CF 9: [Remove] button in Add or Remove Programs does not do anything.
It works normally with the other programs but it would not remove CF 9.
The C://JRun4/Uninstall/Uninstall Cold Fusion 9.exe does not execute either while executables have been added into Control Panel -> System -> Advanced -> Performance -> Data Execution Prevention.
What would we do at this point?
Thank you!

Hi,
Sounds like you got trouble there and I worry suggestions on forum may not be the best or indeed on track.
I guess c:\jrun4 was the same folder that CF7 installed and perhaps CF7 did not uninstall well or upgrade well to what is now a broken CF9. So now your currently not functional at all I guess you can be brutal and apply forceful changes since you seem to be in place where you can not easily go forward or back. How about this?
-rename jrun4
-reboot
-install CF9 again to newly created jrun4 folder
That way you can keep your neo*.xml files to refer and hopefully have a working file set present with CF9 functional.
HTH, Carl.

Oracle 10g on Windows 2003: instance not autostarting

I'm installing Oracle 10g (10.2.0.1) on two new Windows 2003 servers, and I'm facing the same problem, even after some full re-installations, on both of them; so this issue seems to be some kind of bug related to Oracle 10g on Windows 2003 and not just some random error.
When I run the installation it completes fine, and the database instance gets created and started without any trouble; I can connect to it using the console, the Java stand-alone Enterprise Manager, SQL Plus or anything else; it works when connecting from clients, too.
As soon as the server is rebooted, Oracle services start but it just seems the instance isn't actually started: any connection is refused by the listener which complains about not knowing the supplied instance name, and the oracle.exe process only uses about 11 MB of memory, which is a sure sign it isn't doing anything useful. The instance is configured to start, the registry keys are properly set, and everything works correclty after the installation... but stops working after the first server reboot.
I tried manually stopping and starting the services, in various orders; I tried re-installing Oracle various times; I tried deleting and re-creating the database instance, both at setup time or manually after the setup was done without creating an instance, I tried anything I could think of.
The only thing I didn't try was applying patch set 10.2.0.3 to the installation, but I just can't seem to find them, even though my company has an Oracle partnership; I find Metalink just a bit too confusing.
Can someone please help?
P.S.
The servers are actually VMWare ESX virtual servers, but I just can't imagine this to be the cause of the problem. The operating system on both servers is Windows Server 2003 Enterprise Edition (not R2), italian language, with service pack 2 and all the latest updates from Windows Update. The servers are not domain members and I'm running the installation using the local Administrator account.

I don't have a physical server available now, but I really can't even imagine how the underlying hardware, be it physical or virtual, could affect this behaviour. I'm talking about the Oracle service starting while the instance isn't, this is very unlikely to have any relationship with device drivers.

Installing 9i on windows 2003 server

i am trying to install oracle 9i on windows 2003 server, but i got an error message, like the following...
"There are no patches that need to be applied from the patch set Oracle 9iR2 Patch set 9.2.0.3.0."
i can't find a version(9.2.0.3) for windows 2003 server(32bit) on oracle download section. I think that windows 2003 server doesn't support the Oracle 8i(8.1.7), either.
can someone help me install Oracle 8i or 9i on windows 2003 server?
Thanks...

I'm not sure there is a supported version for your O/S but if there is you will find it by going to the downloads page at http://otn.oracle.com.
If there isn't I'd recommend going with a currently supported version of the product rather than one whose full support has ended.

Error in accessing application on windows 2003 server

error on accessing the application on windows 2003 server R12
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
First time i login sucessfully but now its not working.

Hi Mushy;
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.First try to run autoconfig and retest issue. If you have still same error check log file for more details
Also check:
500 Internal Server Error Servlet error:
500 Internal Server Error Servlet error:
R12 Startup Issue
Regard
Helios

Schedule rman script in Windows 2003

Oracle 10.2. I wrote a rman script and tried to schedule auto run in Windows 2003 server. I got this errors:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12560: TNS:protocol adapter error
The batch file name: rman_backup.bat
content: rman target / cmdfile rman_backup.rcv log rman_backup.log
Here is how I set it up:
go to Control Panel>Scheduled Tasks>Add Scheduled Task, find rman_backup.bat, choose the run time and finish it. When asking for user name and password, I supply the user which is in oracle dba group.
But when it run, it just produced the above error and won't run.
Please advise
S.
in SQLnet.log
fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=D:\oracle\product\10.2.0\db_1\bin\rman.exe)(HOST=W3TY5Z203)(USER=WELC))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.4.0 - Production
Time: 30-MAR-2010 11:27:00
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0

here is example of script we are using to backup database from windows scheduler:
set oracle_home=d:\oracle\ora920
set path=d:\perl\bin;d:\oracle\ora920\bin;c:\winnt;c:\WINDOWS\system32;
set PERL5LIB=''
set NLS_LANG=AMERICAN_AMERICA.WE8MSWIN1252
set TNS_ADMIN=d:\oracle\ora920\network\admin
d:
cd \scripts
set oracle_sid=car
rman target sys/car_$z3br4 catalog rman/oemrp_pwd@oemrp @rman_level0_car.rman > rman_level0_car.log
perl email_log.pl "RMAN Level 0 Log" d:\scripts\rman_level0_car.log CARthis script backing up 9i database. 10g and 11g database we backing up via EM grid control.
You can change this script to backup 10g or 11g databses as well.

New create desktop shortcut GPO is causing 1030 and 1058 errors on a Windows 2003 terminal server

Primary DC: Win2012. BDC: Win2008. Clients: Win7, Win8.1. Maintaining an old Win2003 terminal server to run legacy software.
Everything works fine for a look time until I added a new GPO to create a desktop shortcut on the client machines, Windows 2003 runs into Error 1030 (Cannot query list of GPO) and Error 1058 (Cannot access the file gpt.ini for GPO, The system cannot find
the path specified) GP processing aborted).
Tried changing the GPO to target Win7 and 8.1 only. Tried creating shortcut using Computer Config settings only as well as User Config settings only. Deleting the GPO and creating it from scratch. Nothing works, as soon as GPO is in place,
it disables the Win2003 from processing any other GPO.
No issue with the client machines or other Windows servers.
Thanks in advance for any help.
Roget Luo

Hi Roget,
Thanks for posting here.
Error 1030 and 1058 could be caused by many aspects.
Firstly, please run the command dcdiag on the command prompt of a DC to check if there are any error.
Secondly, make sure the DFS service is started on the domain controller, and set the Startup type to automatic.
What's more, make sure the TCP/IP Helper service is started on the domain co, set it to Automatic and started it.
For your information, please refer to the following link to get more help:
Userenv errors occur and events are logged after you apply Group Policy to computers that are running Windows Server 2003, Windows XP, or Windows 2000
http://support.microsoft.com/kb/887303/en-us
How to solve event 1058 and 1030 on Windows Server 2003 SP2 member server in a domain?
http://social.technet.microsoft.com/Forums/en-US/ceec95fb-3efa-4016-8dd5-7003909abba4/how-to-solve-event-1058-and-1030-on-windows-server-2003-sp2-member-server-in-a-domain?forum=winserverDS
Windows 2003 Server USERENV 1058 & Group Policy Errorshttp://social.technet.microsoft.com/Forums/en-US/fad9cd47-5091-481f-8bda-0e7b10b2c814/windows-2003-server-userenv-1058-group-policy-errors?forum=winservergen
Group Policy - Event ID Errors 1030 & 1058
http://social.technet.microsoft.com/Forums/en-US/6c08278d-c3e3-434a-bcda-18d411a8e9fa/group-policy-event-id-errors-1030-1058?forum=winserverGP
Hope it helps.
Best Regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error Export DB 9.2.0.8 Windows 2003

I have DB Oracle 9.2.0.8 in windows 2003 cluster (Active/Passive)
export db, error:
EXP-00008: errore ORACLE 37002 rilevato
ORA-37002: Oracle OLAP failed to initialize, please contact Oracle Support.
ORA-06512: a "SYS.DBMS_AW", line 18
ORA-06512: a "SYS.DBMS_AW", line 38
ORA-06512: a "SYS.DBMS_AW", line 248
ORA-06512: a "SYS.DBMS_AW", line 488
ORA-06512: a "SYS.DBMS_AW_EXP", line 270
ORA-06512: a line 1
EXP-00083: Problema precedente rilevato durante la chiamata a SYS.DBMS_AW_EXP.schema_info_exp
help????

OWNER,COUNT(*)
ADT,28
ANAGRAFI,2
ATTOE,1
CCO,2
DATAANA,91
ESELWEB,35
ICTSG,1
MAD,7
ODM,3
OLAPSYS,108
PASTIDIETE,1
SACS,17
SELIN,2
SOWDATI,14
SYS,16
WEBAPP,83
WKSYS,41
exp system/system full=y file=...... log=.......

Error export from my database sql 2005 with Windows 2003 abap+java

Hi all
I'm trying to create an Export from my database sql 2005 with Windows 2003, but SAPINST starts with an error. ABAP+JAVA stack
While running the export preparation, I am getting the following error;
INFO 2010-09-08 12:12:43
Output of C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key is written to the logfile C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/UTL.java.log.
WARNING 2010-09-08 12:12:46
Execution of the command "C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key" finished with return code 64. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_13-b06, mixed mode)
ERROR 2010-09-08 12:12:46
CJS-30071 Execution of UTL tool 'C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key' aborts due to database connection error with return code 64.<br>DIAGNOSIS: The connection parameters are wrong or the database server is shutdown.<br> SOLUTION: Check 'UTL_load_usages.log' and 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/UTL.java.log' for more information.
ERROR 2010-09-08 12:12:46
FCO-00011 The step getUsageTypes with step key |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_Java_Prepare_Export_Dialog|ind|ind|ind|ind|5|0|getUsageTypes was executed with status ERROR .
Could anyone please help me out on this, if possible?
Thanks
JM

Hi,
please ensure that you use a SAP supported JDK as below:
716604 for the Sun JDK (Windows, Linux, Solaris)
709140 Recommended JDK and VM Settings for the WebAS630/640/7.0
And the re try the export pls.
Regards,
Snow

Ecc6 on windows 2003 db2 v9.1 ,db13 backup error

Similar Messages

Maybe you are looking for