[ECC6 - se06] - how to set System Change Option / subentries to modifiable or not modifiable

When the customizing is set to "modifiable" we have to set all thesub items to "modifiable".
What is the parameter to make all the sub items under Global Settings to modifiable or not modifiable.
In fact, it is very long and not so interesting to set all sub items each time we are requested to open Customizing.

Thank you Reagan,
I think I wasn't precise enough.
As I tried to show in my snapshot, I agree that I can change all the under items but that is my problem.
How to make them ALL selected when you set the parent "Global Seting" to modifiable.

Similar Messages

SE03 Set system change option ?

What is the meaning for SE03? Why would I set anything to motmodifiable in DEV.
I would think Software comp and namespace should all be modifiable in my Developemnt environment.
Does anyone have some information that describes what this actually does or any pros and cons with setting options on the SW components and namespaces.
Thanks
Weyland Y.

Hi Weyland,
By understanding the architecture of SAP like, what is a Client , Cross-Client settings and Repositories. You might have an answer, why this system change option is really needed.
refer the link:
http://help.sap.com/saphelp_nw04/helpdata/en/57/38de9b4eb711d182bf0000e829fbfe/content.htm.
System change options settings mainly affect repositories & cross client customizing, changing the settings at these level will affect all the clients .
Thanks
Ahamed
Edited by: Ahamed Yasin on Feb 5, 2010 11:38 AM

SE03 / SE06 System Change Option Scope

Hi All,
We are creating a source system from R/3 to BW in some specify step we need to change the System Change Option of the sistem in a particular client (SE06 -> System Change Option -> No Modifiable to Modifiable and Modifiable to No Modifiable).
My question is: This changes are Cross Client?
Or only apply to the specify client where you are logged?
Best Regards,
Erick Ilarraza

On their own, Global and Compenent specific change options are not client dependent as they are not related to the logical system of the ABAP user nor the master and transaction data (tables with field MANDT as key).
Personally, I think of it as a "call stack" of checks on whether and what you can modify. Perhaps "System Change Update-ability" would have been a better label, but that is not good English.
As the stack is released for a user in a client (a logical program system), the system determines what can be updated at different levels of the stack as it unfolds, a bit like a spring. At the top there is SE06. At the bottom of the spring there are individual authority-checks which are system, client, program flow and context, and user access dependent.
Depending on where in the stack you release the spring from and how you got there, your user can update parts of the stack. Often the term "logical systems" is used in connection with the client (SCC4 client), but also many others such as workflow etc.
=> If the user can pass authority-checks for access at the bottom of the stack (S_DEVELOP is the key control here), then they can also change that which the top of the stack was designed to control. If you can debug, then there is nothing which will stand in your way.
> My question is: This changes are Cross Client?
It depends. You still need to control access via authorizations within the client to secure access to the whole system.
Cheers,
Julius

In which table system change options are set

In which table system change options are set(from transaction se03). I have table logging on but do not know in which table I should look for changes.

Joe,
Below link & sap notes may be useful.
http://www.saptechies.com/how-to-activate-the-img-change-log/
388691 Cross client customization, system change options
184586 - System change option and BW
Thanks
Sushil

Software components can keep modifiable in bw 3.5 system change options

hello experts,
can we keep software components modifiable in bw 3.5 production in system change option (se06)
it very urgent

Hi
Transaction SE06 - Processing After Installation of the CTO
Transaction SE06 has to be executed once in every newly installed R/3 System. This applies to an R/3 standard installation as well as the installation of a copy of an existing R/3 system.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport Organizer Closing other requests and tasks Setting the system change option
Meaning of the system name The system name (SID) is defined during the installation with R3setup and cannot be changed subsequently.
When you choose names, make sure that there are no naming conflicts with existing systems. Under no circumstances may two systems within an SAP system group have the same name.
The installation type of the R/3 System is specified in the initial screen:
R/3 standard installation
The R/3 System was installed from the SAP CD using R3setup. It is assumed that the system is running on a correct, delivered version of the R/3 System. No adjustments based on corrections or repairs have been made.
If you set up an R/3 System that originated from a database copy using this option, problems could arise when you upgrade or modify objects with the Change and Transport Organizer.
Database copy or database migration
The R/3 System was created on the basis of a copy. R3setup provides utilities to do this. The R/3 System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new R/3 System to the SAP system group, you have to give it a name that has not yet been used in the group.
You should avoid using a previously used system name as this could cause serious complications and may also lead to the loss of information.
If you have installed your SAP System as a copy of an existing SAP System then you must configure the CTS after installation.
In SAP Systems installed with R3setup from the SAP CD the basic settings for the CTS are generated during the configuration of the Transport Management System. You do not need to perform any processing after installation.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport System
Setting the system change option
Closing foreign requests and tasks
You must specify the installation type of the SAP System on the initial screen:
Standard installation
The SAP System was installed from the SAP CD using R3setup. It is assumed that the SAP System is running as a correct, delivered version. No adjustments based on corrections or repairs have been made.
If you set up an SAP System that originated from a database copy using this option, problems could arise when you upgrade the system or modify objects with the Transport Organizer.
Database copy or database migration
The SAP System was created on the basis of a copy. R3setup provides utilities to do this. The SAP System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new SAP System to the SAP system group, you have to give it a name that has not yet been used in the group.
Do not use an existing system name since this could cause serious conflicts and may lead to the loss of data.

System change option prevents entry in QS41

Respect Guru,
in our production system System change options in
Se06 is set as not modifiable, further client is closed.
Client role set is Production.
We are unable to edit entries in QS41, but we edited enties earlier with the same settings mentioned earlier.
Please help us in this regard.

Thank you Paul,
you are right paul, i did changes as per your suggestion.
Things worked out in Proudction server.
Thanks and regards,
Daya.
Mohan raised this forum for me. Further i am not able to award points for you.
Please suggest

ChaRM:System Change Option

Hi Team,
I have activated CHaRM BC sets and created maintenace project. The mainteanace cycle also created successfully. But in the t.code /tmwflow/cmsconf, in the "System Change Option" tab, no systems are displayed. How to bring the ChaRM client, DEV,QA &PRD systems (satellite systems) in this tab.
Note; I am working in SAP EHP 1 for SAP Solution Manager 7.0, ST: SAPKITL433
Thanks.
PSK
Edited by: psk.psg on Oct 6, 2010 7:46 AM

Hello,
Have you completed the following steps in SOLMAN
1) In SMSY creation of RFC connection to the required systems like for CHARM consider you have 3 systems , Customizingg, testing and prod then you have to create the RFC connection to all the 3 systems for particular client.
2) In SPRO in SOLMAN have you Activate Integration with change request mgt
3) Also I hope you have configured STMS properly and distributed the STMS.
Best Regards
Shishir H D

How to set a change pointer for a perticular table?

Hi,
Please let me know how to set a change pointer for a perticular table.

what do you mean by 'change pointer'? normally this idiom is used for sending ÍDOCs from one system/client/org-unit to another ...
do you generally want to record changes to a specific table? then set parameter rec/client using RZ10 for your instance profiles and restart the instances in order for the parameter to take effect.
set the table to 'record all changes' using SE11.
you might re-consider if the table has a lot of data and is accessed very often for performance-resons.
change protocols can be evaluated using tx, SCU3.

What is System Change Option Used For?

Hi,
I need help on security.
we use scc4 settings for client protection. the settings are 'No changes allowed' for client-specific objects and 'No Changes to Repository and cross-client customizing objects' for cross-client object changes.
system change options are set to 'Modifiable'. what is the difference between these settings? Is there any situation that may cause problems?
thanks,
- ferudun

Hi ,
      No Changes allowed flag is explained as below
This flag means that changes in the customizing settings of the client
are not permitted (client lock).
However, customizing settings can be exported from the client by manual
creation of a transport request. A manual transport can be carried out
in the particular transaction for settings with the function Transport,
which places the selected customizing settings in a transport request.
In a productive client, the customizing settings that can be maintained
as "current settings" are excluded from the client lock; this means that
current settings (e.g. exchange rates, posting periods) can always be
maintained in the productive client
For 'No changes to Repository and cross cleint customizing objects' explained below
   o   Changes to the Repository and cross-client Customizing permitted
       There are no restrictions on the maintenance of cross-client object
       for the client when this setting is used. Both cross-client
       Customizing objects and objects of the SAP Repository can be
       maintained.
   o   No change to cross-client Customizing objects
       Cross-client Customizing objects cannot be maintained in the client
       with this setting.
   o   No change to Repository objects
       With this setting, objects of the SAP Repository cannot be
       maintained in the client.
   o   No change to Repository and cross-client Customizing objects
         Combination of both restrictions: Neither cross-client Customizing
objects nor objects of the SAP Repository can be maintained in the
client.
Please reward if useful.

Personalization - which System Change Option is needed?

Hi Friends,
Personalization does not work in Cosolidation or Productive System due to System Change options. SAP Help states, System change options need to be activated... but which one is is? There are lots of them and we usually are very restrictive with System Change options.
Please help!
Angelika

In SE03, administration-->setsystemchange option
Right click and find the documentation available:
Description
Use this program to set the system change option.
Use the global setting to specify whether Repository objects and cross-client Customizing are modifiable or not.
To make cross-client Customizing objects modifiable, you need to allow changes in the global setting and the Client Setting.
There is also another option for Repository objects: Each Repository object is in a namespace or name range, and in a software component.
So that a Repository object can be changed, you need to set the following to Modifiable:
the global setting
the namespace or name range
the software component of the object
You can set the software component so that the Repository objects are Modifiable, have Restricted modifiability or are Not modifiable. Restricted modifiability means that you can create Repository objects in this software component as non-original objects only.
You can set the namespace or name range so that its Repository objects are modifiable or not modifiable.
Requirements
You need the administration authorization for the Change and Transport Organizer to execute this report program.
Output
All software components and namespaces/name ranges are displayed. You can then make your changes to them.
Example
Notes
The SAP System logs this activity. To display the log of the system change option settings, choose Log.
The way the system change option is set has no effect on client-specific Customizing changes. The Client Control Setting determines whether you can change client-specific Customizing or not.
To set those namespaces for which you have the producer role to Modifiable, choose Edit -> Own namespaces modifiable. These include your own prefix namespaces, if you have applied for any from SAP. For more information on using prefix namespaces, see Help -> SAP Library -> BC - Basis Components -> Change and Transport System -> Namespaces and Naming Conventions -> Development in Reserved Namespaces.
Hope this helps

How to set auto delete option for old messages

Hi All,
Can any one help me on how to set auto delete option for mails older than 15 days from my Z10.
James Kurian

There is no such option in BB 10.
However, you can achieve a similar result by setting your email sync timeframe to 14 days (the closest option).
If you are using an ActiveSync account (such as Hotmail, Outlook.com), go to Settings > Accounts > select the account. Tap advanced at the bottom of the screen. Scroll to the very bottom, tap Sync Timeframe and set to 14 days.
If you are using an IMAP account (such as Gmail or GMX), you will have to delete, then re-add your account. The Sync Time frame is only avaialble during setup for these accounts. When adding, tap advanced at the bottom of the screen and set the Sync Timeframe.
Hope this helps.

How to set Analysis graphics background color to Transparent? not White.

How to set Analysis graphics background color to Transparent? not White.
thanks
Edited by: user13257485 on 2010-8-15 下午11:53
Edited by: user13257485 on 2010-8-15 下午11:55

Hi,
We almost had the same requirement, but we just needed to color a specific column.
Here goes the solution to that, you might do the same for your row highlighting
Changes are required in jsff and one method to be added in backing bean
1. JSFF :
<af:column headerText="Amount"
                 id="c4" width="100"
                 inlineStyle="#{backingBeanScope.BackingBean.cellColor}">2. Backing Bean
//searchResultTableVO is Table's VO
public String getCellColor() {
      FacesContext ctx = FacesContext.getCurrentInstance();
      ExpressionFactory ef = ctx.getApplication().getExpressionFactory();
      ValueExpression ve = ef.createValueExpression(ctx.getELContext(), "#{row}", FacesCtrlHierNodeBinding.class);
      FacesCtrlHierNodeBinding node = (FacesCtrlHierNodeBinding)ve.getValue(ctx.getELContext());
      Row row = node.getRow();
    if(row.equals(searchResultTableVO.getCurrentRow())){
//You can add your inline style for font-style too
      return "background-color:Red;";
         return null;
}Hope this is helpful :)
Regards,
Neha..

How to set Password change through BSP Application

Hello All
Before dropping my question i will explain you what was the Real scenario, i am using WAD 3.50 Version and server is BW 3.0B.we are not using portal, and Enduser will view the reports in the browser through the WAD execute Http link.
Question.
whenever the enduser uses Http link of web template in the browser, he will connect through VPN and they can able view the reports. the question is That Some system Enduser won't have SAPGUI in their system so they wants to change the password because they won't know even if it is expire. is it possble to set password change system through BSP Application in the WEB Templates
Please Help me how to set Change Password in the browser for the WAD Application.

right now when the user calls the BW report url , he is prompted for authentication via pop up right?
to enable password change option in the log on screen use system logon for BEX service in sicf.
go to transaction SICF and navigate to sap/bw/bex
double click on node Bex.
in the resulting window, go to error pages tab and under that in log on errors tab choose "System log on radiobutton" save and now try calling a webtemplte.
Regards
Raja

How to setting the printing option in javafx 2.1 or later?

Hi,
We need to printing pdf document in our project, it's can use the open source to do it now, but it's has some problem when running the program in other pc.
Step 1, It's setting the program with full screen in our program.
Step 2, In the button event, we call JDK swing print dialog to setting the page option.
They will not bring the swing frame to front, and the Javafx program unable to response cause by the swing printdialog.
If anybody know how to deal with the paper option setting by Javafx, Please help me, thanks a lot.

Vibhor - You are developing using the Oracle Application Express facility running on Oracle Database 10g Express Edition. You can export applications you develop there for use on Oracle Application Express versions 2.0 and higher which can be used with Oracle Database server versions 9.2.0.3 and higher.
Electing to install an application as Run Application Only will prevent the editing of the application definition by the end user. This can be useful if you assume that the end user will have access to the Application Builder in his database, which is likely if the end user's database is Oracle Database 10g Express Edition (XE). However, there is no way to prevent an XE user from having complete control over applications installed into those databases. If the end user's database is not XE, then only an Oracle Application Express site administrator will be able to change the application's Run Application Only setting to Run and Build Application but all developers with developer accounts in the Application Builder will be able to view and edit the application definition.
Further, when you say "he can easily access my code", remember that the application definition is contained completely within the export file that you distribute but you may have in mind your PL/SQL source code as well. PL/SQL can be wrapped using a utility to make it more difficult to see in clear text.
Scott

How to set Password change in Web templates through WEB DYNPRO

Hello All
Before dropping my question i will explain you what was the Real scenario, i am using WAD 3.50 Version and server is BW 3.0B.we are not using portal, and Enduser will view the reports in the browser through the WAD execute Http link.
Question.
whenever the enduser uses Http link of web template in the browser, he will connect through VPN and they can able view the reports. the question is That Some system Enduser won't have SAPGUI in their system so they wants to change the password because they won't know even if it is expire. is it possble to set password change system through WEBDYNPRO ABAP in the WEB Templates
Please Help me how to set Change Password in the browser for the WAD Application.

To do this you will have to use either make use of portal or BSP application or Dynpro..
It is not possible for the user to change the password just from the web query

[ECC6 - se06] - how to set System Change Option / subentries to modifiable or not modifiable

Similar Messages

Maybe you are looking for