ECC6 V_TIBAN Transport for House Banks IBAN

Hi SAPer,
I wonder if you have experienced this.
As I am now implementing ECC6 and trying to transport IBAN for house bank account.
The IBANs are stored in the application table TIBAN ane even though I
transport House Banks, NO IBANs were transported
As 4.7 or before, I would normally use transaction SM30, enter the table V_TIBAN and transport, which is OK because it set as maintenance is allowed
However, in ECC6 system, V_TIBAN does only have "Display/Maintenance only allowed with restriction" hence am not able to SM30 transport. The change in View setting appears to be out of SAP box.
Would any of you shed some light on how I would be able to work around this?
Thanks for your tips
taro

Hello,
We have ECC 6.0 and is able to create entry in V_TIBAN successfully.
Please go to SE11 > View V_TIBAN. Go to tab "Maintainance Status"
In "Access" part, radio button selected should be "Read, Change, Delete, INsert"
In "Delivery Class" it should be "A Application table (master and transaction data)"
In "Data Browser/Table View Maint" it should be "X Display/ Maintainance Allowed"
However if your setting is different, then you must have a support pack restricting the access to V_TIBAN in SM30. See the below OSS note 983944, which provides and alternative in such scenario:-
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=983944]
This should solve your issue.
Regards,
Gaurav

Similar Messages

BDC for House Bank thru fi12

Hi,
I hav a recording for fi12. In that after giving address, im double clicking on
'Bank Accounts' to give Account id, GL account, etc,.
But the function code for double clicking is not triggering the next screen while running the BDC program.
In recording it gave the function code as '=%_GC 156 22' for double clicking.....
How can i sort this double clicking issue or is there any Bapi for this?

hi kapilan,
i do have problems while creating BDC for FI12 T.Code.
After brief analysis i found that:
1. its not standard transaction code but its part of customizing setting.
2. at end it creates transport request.
after consulting our function consultant. the decision was to create different recordings for House Bank Adress data and bank accounts.
try this way.
Regards,
krishna chaitanya

How to define GL account for House Bank?

Dear Friends
I maintained house bank sbi, house bank account and GL for house bank in FBZP. Then I maintained a Check lot in FCHI. When I was running F-58 and selected Check lot no as 8 as I maintained in FCHI, I am getting the following error:
No G/L accounts are defined for bank SBI and payment method C
Message no. F5459
Diagnosis
For the specified payment method C, in combination with house bank SBI, you have not specified a G/L account to which the posting is to be made under bank selection (Goto -> Account Determination).
System Response
Input not accepted.
Procedure
Correct your entries if they are incorrect. Otherwise ensure that the missing bank selection details are added.
How to define GL for a Bank? Wht is T code?
Thanks
Chandra

Hello,
In FBZP assign payment method C to the bank account. and check while creating the bank account are give main bank account in FI12, account id.
Hope this is clear, in case of problem revert me back.
Regards,
Sankar

Transport way - house banks(fi12)

Dear export,
I tried to transport the house banks(FI12) from DEV to QAS.
Table view -> Transport
However, the house banks was not changed on QAS system.
So I directly edit it on QAS.
Is there anyway I can transport House Banks using a transport management system?
Thanks.

Hi
Through FI12 you can create house banks by creating request. u release the request then transport it. then changes will appear in qas. Some time bank address wont be changed.
Regards
Lakshmi

DME data for house bank is not maintained - Message no. F0 275

Hello!
We got an error message in transaction 'F110 - Payments':
DME data for house bank 1253 210 is not maintained
Message no. F0 275
Diagnosis
The system could not fill a payment medium correctly due to missing house bank additional information.
System Response
The payment medium was created. You can weigh up whether the payment medium program run should be repeated after eliminating the error.
Procedure
Correct the error by expanding the missing house bank DME details.
Proceed
Do anyone know of which 'Data medium exchange' field(s) for House bank information would be mandatory:
Alternative bank ID
Bank receiving DME
Customer number
Company number
Bank number
Account number
Bank control key
ISO currency code
Instruction key
Lead days
Payment method and program is:
Country BE Belgium
Pmnt method F
Description Foreign banktransfers
Payment medium program RFFOBE_E

Dear Kuki,
Please, verify in the transaction FI12 , field instruction key for the house bank.
Regards,
PaULO

House Bank IBAN Code

Hi Friends,
I created a New House Bank and maintained the Bank IBAN Code to the Bank Account and transported it to another client. However the IBAN code is not copied in the other client .
Please help me how to maintain the IBAN code ??
Thanks
NTH

Hi,
IBAN code is not transported automatically. You can include it manually in the transport by adding table TIBAN with relevant key to your change request (via SE10).
...or you can simply maintain it again in target system.
Regards,
Eli

Creation of Account payee keys and Table for House Bank

Hi Gurus,
Please tell me how to create a Account payee keys what is transaction code for this.And let me know that what is table to check the house Banks.
Thanks

I dont think you create payee keys mate, you get that data from your financial institute(bank) and then upload it into your sap system.
so if I were in your position I would talk to the business user who deals with the bank & bank transfers currently in your client-organisation and ask for that info to be provided.
from my previous payroll expreience I know the business user for payroll, usually the payroll manager, gets that info for the sap team member and then there should also be a standard upload program to upload all those payee keys into the system.
cheers

Choose a house bank from Varinet for automatic payment

HI Gurus,
I am using multiple bank accounts. I have Ranking order defined for all those House bank and account ID's in FBZP. Also I have defined available amount as 999999999 for all those house banks and account ID's. Now I have below scenario.
I have CIti Bank as ranked one in FBZP. I have a House bank of ICICI bank maintained in Vendor account. But I want to pay from SBI bank which I will maintain in my variant of Automatic payment program.
Is there any way where I can overwrite the ranking and House bank maintained in Vendor master record to choose my own House bank for a payment run?
Thanks in advance....
Abhi.

Hi,
Here is the priority used for house bank selection in the same order.
1. Document line item
2. Vendor master data
3. Bank Determination - Ranking order (FBZP settings)
4. Edit proposal you can overwrite the house bank selected automatically
by F110.
In case none of these satisfy your requirements, you can implement BTE 0001810
You could use the business transaction event (BTE) 00001810 to select the house bank via your own logic.
(Please read the documentation of function module SAMPLE_PROCESS_00001810 how to implement such a BTE.)
Hope this information helps.
Kind Regards
Soumya

House bank ID and acct ID are missing in mast.record for acct...

Dear SAP Gurus,
Please help out in the error that I am having here in FBWD for clearing accounts.
I made payment with F110 for Bill of Exchange and Now I want to clear the amounts.
1,

Dear SAP Gurus,
Please help out in the error that I am having here in FBWD for clearing accounts.
I made payment with F110 for Bill of Exchange and Now I want to clear the amounts.
1, How can I clear these amounts after payment with F110.
2, what are the other ways to clear the amounts apart from FBWD.
3, Error (1), the error that I am getting while trying to visualize the values with the account which is assigned to the house bank "House bank ID and acct ID are missing in mast.record for acct 11301246" Message no. FW024.
though the house bank and ID exists in the system and accounts are assigned in the area OBVCU (FBZP) at "Bank Accounts" area. except the account the DISCOUNT ACCOUNT (G/L A/C is assigned) in the FI12 at Bank accounts area.
4, Error (2), Retd bills exch. acct missing for house bank acct BBVA1 BBVAC (house bank &ID) and pyt method.
system response is : Bills of exchange is imported but excluded for further processing.
thanks in advance,
Yella Reddy

Bank Accounts and House bank info

Hi Friends,
We use ECC6.0 version.
I have created GL accts seperate for Main bank, Bank P and Bank R
I have created Bank Key as well.
In FI12 - is it mandatory that i create seperate house bank ID's - seperate for main, BP and BR - why?
Many Thanks
Sanjay

Hi,
1100- Main account
1101- Out going payments
1102- Incoming payments
Here 1100 account you have to assign for house bank.
No need to create another two ID's for incoming and out going accounts.
You have to give House bank details for these three GL's in the GL masters.
Rgds
Murali. N

Issue with GL account determination of House Bank

Hello everybody,
we have small hiccup with gl account determination for house bank while doing FBWE (bill of exchange) transaction.
I have configured the house bank and created a sub account for factoring and assigned values for G/L and Discount acct using FI12.
Even linking of these to g/l's has been done in FS00. We were expecting the g/l to be pickedup automatically, whenever the housebank and account id are given in transaction.
However, when we are doing FBWE transaction for COLLECTION, the posted document shows another g/l which i find as COLLECTION ACCOUNT in table T012K-WIKON(Subaccount for bill of exchange collection - House Bank Accounts), though i am sure that i didnt assign this account anywhere in FI12 ( i couldnt see a place to attach it).
Can anybody guide me, how the <b>Subaccount for bill of exchange gets attached to a house bank and Account ID</b>? or where i might have gone wrong?
Thanks in advance,
Regards,
Lakshmi Narayana.S

Thank you very much Dominik.
Indeed, entries are missing in OBYK for the account i was having trouble. Let me check with my functional guy to know what information needs to be maintained here.

House bank remit address conflicts with vendor bank data in FI02

The house bank remit address is entered in FI02 base on the bank key or ABA number. Since maintenance of bank address is the same in FI02 for vendor banks there is the potential of a vendor using the same Bank and routine vendor bank address maintenance to conflict or change our house bank remit address. Is there a way to enter remit addresses for house banks so they can't be accessed from FI02?

hi deepa,
it's not good because in the free selection if we will defined house bank he will be used for all the payments in the payment run
and we need that in the same current payment run we have for example vendor 1 - house bank xxx for vendor 2 - house bank yyy
etc..
i do not see in your suggest the above situation work
regards,
meir

House bank mass change

Dear experts,
Is it possiable to make mass changes for house bank? Please let me know transaction code?
Regards
babu

Hi,
There is no standard way to change value of field/fields of house bank.
You will have to do it manually only.
Other options could be to write a small program with initial selection screen of house bank and account ID. Take help from ABPAP consultant for writing the coding.
Best of luck !!!
Regards
K Khatri

House banking, manual cheque lot creation,

hello,
house banking, manual cheque lot creation, the first feild to enter is payment document number, from where we get that payment document number, just entered the payment posting number, but count not save ,

Hi
for House bank creation use T.code -FI12
For Check lot creation -
FCHI

In-House Bank with IS-U

Hello everybody,
is it possible to use In-House Cash with IS-U?
A SAP consultant told me, that it isnt possible ´to use In-House Cash with IS-U (in SAP standard).
The payment run in FI-CA isn´t able to create idocs. But you need idocs to communicate with In-House Cash.
is there a possibilitie for IS-U to communicate with In-House Cash?
thanks in advance.

Hello,
You can try using the below IDocs'
ACC_DOCUMENT01         Accounting: Posting
ACC_DOCUMENT02         Accounting: Posting
ACC_DOCUMENT03         Accounting: Posting
You can place the values in one of the above suitable IDoc structure(s) and post the values in Cash management as per your requirement.
The Payment run data <FPY1> gets stored in the following data base tables
DPAYP
DPAYC
Other imp payment run tables <including above> are below:
DPAYC      Payment program - administrative records
DPAYCHKH   Header: Accounting Using Creation of Payment Media
DPAYCHKH1 Supplemental Assignments with Creation of Payment Media
DPAYCHKNUM Check Number Lot: Header
DPAYCHKNU Check Number Lot: Single Numbers
DPAYCHKP   Header: Accounting Using Creation of Payment Media
DPAYCHKSET Check: Settings for Check Creation for House Banks
DPAYG      Payment program - payment group
DPAYH      Payment program - data for payment
DPAYN      Sequential Number Assignment
DPAYP      Payment program - data on paid item
DPAYV      Payment program: Variants for payment medium and list
Hope this helps
Rgds
Rajendra

ECC6 V_TIBAN Transport for House Banks IBAN

Similar Messages

Maybe you are looking for