ECC600 ALV Filter values doubtful

Hi,
using FM REUSE_ALV_GRID_DISPLAY.
Want to set filter on a column. Very useful is the F4 Help for filter values that shows the distinct values in that column.
In my customer's ECC600, the system adds a couple of hashmarks after the filter value. This happens for any kind of fields, i.e. an IDOC number appears as
0000000001224580################
Icons appear as icons with hashmarks at the end, when selected the value is copied (icon_lights_green) as
@08@####
sales org as
5100####
What can I do to avoid this behavior?
Regards,
Clemens Li

Alright, wil wait for 710

Similar Messages

How to capture the entries based on filter values in oo alv..

Hi all,
I have a scenario in my oo alv report, when the user select the any column on report and selects the filter option. In that the user can enters required values. Based on filter values the output will be displayed. Now how can i capture currently displaying entries on report.
Thanks,
Ashok

Hi Jozef,
Is that GET_FILTERED_ENTRIES( ) reads the indexes or values from the entries..?
Thanks,
Ashok

Problem with ALV filter functionality when filtered for multiple values

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

ALV Filter - filter value not working / not passed to ALV

Hello,
My ALV is set in a quite nested landscape meaning at least two components and quite some views within views.
When now setting a filter in the filter bar, the entered value is not passed to the ALV. Whereas a filter set in the config menu of the ALV is working. (Also selections are lost with every roundtrip, but that is not the mayor issue.)
I created an event handler for the setting of the filter (event "ON_STD_FUNCTION_AFTE" -> ID "SALV_WD_FILTER_DEFINE") and checked the filter rules using this method: CL_SALV_WD_MODEL_TABLE_UTIL=>IF_SALV_WD_TABLE_UTIL_FIELDS~GET_FILTER_RULES( R_MODEL = LR_ALV_MODEL )
When creating a filter using the bar, no filter rule is recieved by the method. On the other hand, the method yields the rules correctly when they are set using the config menu.
Does anyone know why this happens?? I would very much appreciate your input!
Kind Regards
Robert Schulz

Hi,
@Lekha:
With "config menu" I was referring to the "Settings" dialog of an ALV. There I can provide a filter value using the tab "Filter" and it is applied absolutely correct whereas values entered directly in the "Filter" row are not even passed to the ALV (see first post).
@kissnas:
These links are not about my issue! One is about setting filter values using coding and the other is a totally other topic.
@kranthi kumar:
There is no ALV-implementation in the MODIFYVIEW (not one ALV object is touched there).
Regards,
Robert

How to Pass Filter value to Filter dependent BADI ?

Hi,
I am having some doubt related to CRM Badi's there are two types of BADI's one is Muliple use badi and other in Filter dependent BADI.
    Incase of filter dependent BADI. when we are creating implentation for filter BADI how to pass this filter value to that new implentation.i.e. if we are going to see the importing parameters for Each method of that Filter Dependent BADI.   the 1st importing parameter for each method is FILTER VALUE for each method in Filter Dependent BADI.
      So my question is that how to map this filer value while creating new implentation for Filter Dependent BADI ?
     It will Automatically get this importing filter value or we have to do any coding for this ????
for this you can refer badi : CRM_ISA_BASKET_HEAD
this Badi defination is filter dependent.
Please let me clarification for this .perfect answer will be rewarded !!!!
Regards,
Amol Tambe
SAP CRM Technical Consultant.

Hi,
If this is the case. Then what is the use of filter in that if it is automaticaaly getting mapped i.e. How the filter will restrict the use for Badi ??
          I am not getting it ??????
Because for every simple badi when we are going to creat the implenation it will work fine without any restrictions by getting all importing values automatically.
And incase of filter depednt Badi also its going in same way it will get its filter value automatically so both the cases are same for Filter dependent badi and simple badi.
Then what is the use of Filter value ????
Regards,
Amol Tambe.
SAP CRM Technical Consultant.

ABAP WebDynpro ALV Filter Dropdown

Hi guys,
Is it possbile to do the dropdown list of alv filter?
If so , how to do that?
Thanks in advance.
Best regards,
Vincent

Hello Lakshmi,
I did as follows.
1. Go to WDComponent.
2. Add SALV_WD_TABLE as Component use at Used Components tab.
3. Go to ViewController.
4. Add SALV_WD_TABLE as used Component and used Interface at Properties tab.
5. Map FILTER_VALUES node from used Component of ALV to Context of ViewController at Context tab.
6. Code as follows.
DATA lo_nd_filter_values TYPE REF TO if_wd_context_node.
DATA ls_filter_values TYPE REF TO if_wd_context_element.
DATA l_wdy_key_value_table TYPE TABLE OF wdy_key_value.
DATA l_wdy_key_value TYPE wdy_key_value.
lo_nd_filter_values = wd_context->get_child_node( name = wd_this->wdctx_filter_values ).
ls_filter_values = lo_nd_filter_values->create_element( ).
ls_filter_values->set_attribute(
    name = `FIELDNAME`
    value = `ATTR1`          "Attribute name that you want to set filter.
*Followings are filter values.
l_wdy_key_value-key = `0`.
l_wdy_key_value-value = ``.
APPEND l_wdy_key_value TO l_wdy_key_value_table.
l_wdy_key_value-key = `1`.
l_wdy_key_value-value = `AAAA`.
APPEND l_wdy_key_value TO l_wdy_key_value_table.
l_wdy_key_value-key = `2`.
l_wdy_key_value-value = `BBBB`.
APPEND l_wdy_key_value TO l_wdy_key_value_table.
l_wdy_key_value-key = `3`.
l_wdy_key_value-value = `CCCC`.
APPEND l_wdy_key_value TO l_wdy_key_value_table.
ls_filter_values->set_attribute(
    name = `T_DROPDOWN_VALUES`
    value = l_wdy_key_value_table
lo_nd_filter_values->bind_element( new_item = ls_filter_values set_initial_elements = abap_false ).
Regards,
Masaaki YANOKUCHI
Edited by: Masaaki Yanokuchi on Jan 26, 2010 10:35 AM

Webdynrpo ALV filter issue

Hi All,
In web dynpro ALV we have one column called Article . I am trying to find the article 661-2689 by using Standard SAP filter option but the Article is getting converted to 000000000000000661-000000000000002689 . This zero appending happens when I choose the Filter/ Press enter key . It does not find the article by using Filter option .
Our system version is SAP_BASIS 700 . Please let me know if there is any solution to this ALV Filter issue .
Thanks in advance,
Kiran.

Hi Kiran,
It depends on the attribute's data element. If it's NUMC this property is automatically displayed in the context in the bottom panel labeled "Formatting".
But if you are trying to do it whit Article i think the data element is MATNR of type CHAR, so this property will not be displayed.
May be, you need to convert the value assigned to your filter field before to trigger the filter. I think you have created an action for the event "onFilter" in your table, so in this action before to do "wd_this->table_filter->apply_filter( )" maybe you need to use the FM CONVERSION_EXIT_ALPHA_OUTPUT in order to quit the leading zeros.

BADI Filter value

hi friends,
i have few doubts in BADI plz explain me
1.i have implemented badi while saving its asking me specify filter value [what to specify here]i specified its default filter value
2.in coding in method i copied standard example code when i did syntax check its throwing me error type 'T_RANGE' is
unknown.in types i specified this variable its giving me 'Enter Type Fully'
thanks in advance
soorya

Hi Soorya,
1. You have to enter the values for that filter Type just below where you check the filter-Depentend check box (Before that u have to enter value in Filter Type).
And this will add FLT_VAL importing parameter to ur methods when u call instance of them in calling program.
IF the FLT_VAL value matches (with the value that u entered earlier) then only this BADI will get triggered otherwise not.
2.The Syntax Check that u are making should be in Import parameter of the Method otherwise it will through the same error.
Please Do reply in case of further Help.
Regards,
Ranjit Thakur.
Please Mark The Helpful Answer.
Message was edited by: Ranjit Thakur

Restrict filter values that are shown in the selection screen

Hi Experts
1) Is it possible to restrict the filter values that are shown in the selection screen in BEx web? When a user are asked to enter a material number and uses the selection button in BEx web, he should only see material numbers for one specific plant. How is this done?
2) Is it possible to remove the selection button for å characteristic filter in the selection screen in BEx web? The selection button I am talking about is the button to the right of where you enter the filter value (two white papers on top of each other). If there is no solution for question 1 we have to go for question 2 solution.
We are using BI 04s, SP 09.
Kind regards
Erik

Hi Erik,
It seems that you would like the user to see value for 1 single plant. If the Plant Value is fixed then you can use this value in the Query and hardcode it.> in the query go to the Plant Chrac and keep a constant value of the Plant.
How ever if you need this value to be dynamic then use a variable for customer exit and populate this value using ABAP.
Regards,
Jasprit

Filter values are not displayed in the Popup Screen

Hi Gurus,
I have executed the query from the Query Designer using Execute to the browser and tried to filter the values for 0plant
Then i am getting the values as question mark '?????' for Key as well as Text.
Note: I am not getting the key values for any of the characteristics.... in any report...
Is there any setting need to done in BI or Portal side...
Please help me if any one got a similar issue....
Thanks in Advance
Seshu
Edited by: seshagiri.rao on Oct 25, 2010 2:19 PM

Hi Vandana thanks for the reply.... i have been waiting from yesterday... to see some replies....
The values in the BW are ok & i have activated the master data too..
I am getting all the filter values for the query in RSRT, but when i execute the same query to the browser i am getting the values as '????' in the filter...
Eg.
Plant Key Plant medium Text.....
but when i select a particular row and add the values i can see the data as below.
1901 Bhubaneswar Depot
Please let me know if any more information is needed.
Regards
Seshu

Changing Filter Values from Macro in BW 7.0

Hello,
in my Workbook I need to change Filter Values of some queries in runtime.
The first thing I found was BEx API reference for BW 3.5, but I wasn't able to make these functions work. After all I found this code:
    Dim BEx As Object
    Set BEx = Application.Run("BExAnalyzer.xla!GetBEx")
    Dim dp As Object
    Set dp = BEx.DataProviders.Item(sDP)
    Dim dimension As Object
    Set dimension = dp.Request.Dimensions.Item("0CALDAY")
    Dim filters As Object
    Set filters = dimension.filters
    If Not BEx.ServerStateExists Then
    MsgBox " Please refresh before using this Makro"
    Exit Function
    End If
    Call filters.SetFilterValue(sFilter) 'this sets the filter value
But using this code I wasn't able to set more than 1 filter value, because the function SetFilterValue removes all previous filters, but now I need to set more than 1 filters.
I also tried to separate different filter values with comma, but this did not help.
Also I will be glad if someone could give me a link on documentation about BEx objects in Excel.
Thanks in advance,
Pavel Baronov

Hi.........
Check this........
http://www.netsaptech.com/SDN/demo/BIM301.pdf
Regards,
Debjani.......

PerformancePoint in SharePoint 2010 - Unable to get filter values from... Error 10828

I currently am using PPT to expose data from a Microsoft Analysis Server cube. The cube is wide open and requires no permissions to access.
The behavior of my filters is odd as sometimes they work perfectly fine, and other times I receive the following error upon report run:
Unable to get filter values.
An unexpected error occurred. Error 10828. Additional details have been logged for your administrator.
I have looked at the ULS logs and found the following:
An unexpected error occurred. Error 10828. Exception details: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.QueryTimeIntelligenceInternal(DataSource dataSource, DateTime currentTime, String formula)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.QueryTimeIntelligence(RepositoryLocation dataSourceLocation, DateTime currentTime, String formula)
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem: Microsoft.PerformancePoint.Scorecards.BpmException: Unable to get filter values. PerformancePoint Services
error code 20700.
This is odd to me, as I can trick the report to run by changing the date filters to another day, then back to the original days that error'ed out and everything is fine. Some guidance would be appreciated.

Hi,
Do you mean that you have Office 2007 and Office 2010 both installed in you computer?
Based on my test, I copy a Access 2010 database into a computer only installed Offic 2007, then using Excel 2007 to import Access database data, no error occurred.
So double click the Access database to see whether the databased is opened with Access 2007 or Access 2010. If it is opened with Access 2010, then try to save it as Access 2007 to
check the issue.
Jaynet Zhang
TechNet Community Support

ALV Filter : Not working for a text field - Strange problem

Dear All,
I have a Z-program where the ALV filter is not working on a particular text field.
The output on that text field is as below :
ABCD
JKLM
YYZZ
ABCD
JKLM
ABCD
JKLM
YYZZ
YYZZ
When we try to filter on YYZZ, it gives blank list. But for other options given abobe it works fine.
I know it is because of the negative sign , but how can we over come this problem ?
Thanks in advance,
Sandip.

Hi Sandip,
Use 'LOWERCASE' in the fieldcatalog.
For the particular text field when you are appending the Fieldcatalog structure to the Fieldcatalog Table
( Suppose LS_FIELDCAT)
Then check the LOWERCASE field.
(LS_FIELDCAT-LOWERCASE = 'X' )
This will serve the purpose.
Regards,
Sourav

How can I pass a filter value to another report?

I'm using a filter within a formula of a field. For example: (FILTER("Facts - Actuals Ledger"."Actual" USING ("Time"."Fiscal Quarter" = '2012 Q 2'))-FILTER("Facts - Actuals Ledger"."Actual" USING ("Time"."Fiscal Quarter" = '2012 Q 1')))*-1
What the above is doing is calculating the variance between Q1 and Q2. My issue is when I drill on this value to a more detailed report, it's combining the Q1 and Q2 values, instead of showing the difference. I'm trying to avoid having to hard code the drill report and was wondering if there's any way to pass the calculated FILTER to the other report?
Thanks.

Hi,
I presume that you want to show the the difference between a prompted quarter and its previous quarter?
If so, I would use the Ago Time Series Function to create a new logical measure for prior quarter e.g.
ago("Facts - Actuals Ledger"."Actual", "Time"."Quarter", 1)
Note that the function should contain the time dimension level for quarter. The 1 at the end is the offset e.g. 1 quarter ago. This measure will now return the prior quarter value for whatever quarter is prompted.
Create a prompt for your report for Fiiscal Quarter, and set a filter in the report for the same column with an operator of Is Prompted.
Add the base measure ("Facts - Actuals Ledger"."Actual") and your new Ago measure to the report. When you prompt the report with a quarter, these two columns will show the Actual amount for the promted quarter and the previous quarter respectively. Now all you need to do is subtract one from the other.
Now, when you drill to another report, the filter value of the prompted quarter will be passed across. Apply the same logic to define measures in the drill report, receiving the prompted quarter only.
Note that you can also use Time Series Functions in the column formula when creating the analysis.
Please mark if helpful / correct,
Andy
www.project.eu.com

List view error "Filter Value is not in a supported date format"

I've column "Name = Order Status","Type = Calculated" & Data Type = "Date and Time". I've given this Condition in the formula:- =IF(NOT([PO Date]=0),"ORDERED","NOT ORDERED"). I'm trying to create view
for this column but its getting error while create the view "Filter Value is not in a supported date format".
Same error I'm getting for column "Name = Status","Type = Calculated" & Data Type = "Number". I've given this Condition in the formula:- =IF([PO Date]="","",IF(NOT([Balance Qty]=0),"OPEN","CLOSED"))

Can you check data type returned for your calculated column 'Balance Qty'?
Try to set it as Number. It may help you.
Thanks.

ECC600 ALV Filter values doubtful

Similar Messages

Maybe you are looking for