ECC 6.0 (lower than EhP4) 里没有Role SAP_LO_SD_ORDER_MANAGEMENT

当您想用ERP order entry scenario 在CRM 7.0 系统里的时候，您可能在ERP系统（ECC 6.0, lower than EhP4）里找不到ROLE SAP_LO_SD_ORDER_MANAGEMENT,这是正常现象，因为在lower than EhP4的ERP系统里没有SAP_LO_SD_ORDER_MANAGEMENT这个role. 如果想使用这个Role
建议将系统升级到ECC 6.0 EhP4

> My question is: How to perform NBUFFORM = 1 with the STMS T-Code?
- logon to client 000 on your TMS domain controller system
- start STMS
- "Overview" - "Systems"
- doubleclick on the domain controller system
- press on "change"
- select tab "transport tool"
- check the parameters and save
- then go back and select in the systems overview "SAP System" - "Update configuration"
Markus

Similar Messages

Windows 7's Infection Rates Five Times Lower Than Windows XP

"Windows 7's marketshare continues to grow at a steady pace at the expense of its two older siblings, Windows Vista and XP, according to the data from StatCounter. In terms of global usage, Windows XP is at 46.44%, Windows Vista at 12.5%, and Windows 7 at 32.64%. Good news for everyone, right? Well, if these adoption numbers aren't convincing enough, perhaps this might convince you (or your technologically challenged peers) - Windows 7 has the lowest infection rates per quarter amongst Microsoft's currently supported operating systems."
Complete Article:
http://www.neowin.net/news/windows-7s-infection-rates-five-times-lower-than-windows-xp
From Microsoft's Security Intelligence Report here:
http://download.microsoft.com/download/6/0/5/605BE103-9429-4493-898B-E3D50AB68236/Microsoft_Security...
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

Hmmm hard to say. If I was going to take a stab at it you might be hitting a DC in a remote site.
http://blogs.technet.com/b/askpfeplat/archive/2011/12/26/in-search-of-roaming-active-directory-clients-how-to-scriptomatically-identify-missing-active-directory-subnet-definitions.aspx
A great tool for this, http://blogs.technet.com/b/askpfeplat/archive/2012/06/09/slow-boot-slow-logon-sbsl-a-tool-called-xperf-and-links-you-need-to-read.aspx
You could also take a look at this. http://blogs.technet.com/b/askpfeplat/archive/2013/03/12/slow-boot-slow-login-sbsl-hotfix-rollup-for-windows-7-and-server-2008-r2-available-today.aspx
Mark Morowczynski
Microsoft Senior Platforms PFE
Blog:
http://blogs.technet.com/b/askpfeplat Twitter:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

"The version of the Player that you are trying to install is lower than what is currently installed" when installing 14.0.0.176

I've been deploying flash updates thru SCCM for a long time using the MSI. With this update, many computers updated successfully, but about 200+ of them failed. Each computer I have looked at has the message "Product: Adobe Flash Player 14 ActiveX -- The version of the Player that you are trying to install is lower than what is currently installed." in event viewer. Attempting a manual install of the MSI produces a similar interactive message. The current installed version is definitely older than the one I am attempting to install. I am only able to re-mediate by manually uninstalling, and then installing 14.0.0.176. I could script and deploy an uninstaller, but I would rather the bug with the MSI be fixed.

Dear María,
Finally, I have been able to reproduce the error, both in ActiveX and plugin installers updating from version 15.0.0.246.
Here you have the logs:
ACTIVEX
=== Verbose logging started: 18/12/2014 16:12:54 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\WINDOWS\system32\msiexec.exe ===
MSI (c) (E0:1C) [16:12:54:137]: Resetting cached policy values
MSI (c) (E0:1C) [16:12:54:137]: Machine policy value 'Debug' is 0
MSI (c) (E0:1C) [16:12:54:137]: ******* RunEngine:
           ******* Product: install_flash_player_16_active_x.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (E0:1C) [16:12:54:138]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (E0:1C) [16:12:54:138]: Grabbed execution mutex.
MSI (c) (E0:1C) [16:12:54:155]: Cloaking enabled.
MSI (c) (E0:1C) [16:12:54:155]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (E0:1C) [16:12:54:158]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:E4) [16:12:54:162]: Running installation inside multi-package transaction C:\WINDOWS\system32\install_flash_player_16_active_x.msi
MSI (s) (30:E4) [16:12:54:162]: Grabbed execution mutex.
MSI (s) (30:4C) [16:12:54:163]: Resetting cached policy values
MSI (s) (30:4C) [16:12:54:163]: Machine policy value 'Debug' is 0
MSI (s) (30:4C) [16:12:54:163]: ******* RunEngine:
           ******* Product: C:\WINDOWS\system32\install_flash_player_16_active_x.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (30:4C) [16:12:54:163]: Note: 1: 2203 2: C:\WINDOWS\system32\install_flash_player_16_active_x.msi 3: -2147287038
MSI (s) (30:4C) [16:12:54:164]: MainEngineThread is returning 2
MSI (s) (30:E4) [16:12:54:177]: User policy value 'DisableRollback' is 0
MSI (s) (30:E4) [16:12:54:178]: Machine policy value 'DisableRollback' is 0
MSI (s) (30:E4) [16:12:54:178]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:E4) [16:12:54:178]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (30:E4) [16:12:54:178]: Restoring environment variables
MSI (c) (E0:1C) [16:12:54:188]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E0:1C) [16:12:54:188]: MainEngineThread is returning 2
=== Verbose logging stopped: 18/12/2014 16:12:54 ===
PLUGIN
=== Verbose logging started: 18/12/2014 16:15:40 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\WINDOWS\system32\msiexec.exe ===
MSI (c) (28:44) [16:15:40:364]: Resetting cached policy values
MSI (c) (28:44) [16:15:40:364]: Machine policy value 'Debug' is 0
MSI (c) (28:44) [16:15:40:364]: ******* RunEngine:
           ******* Product: install_flash_player_16_plugin.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (28:44) [16:15:40:364]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (28:44) [16:15:40:364]: Grabbed execution mutex.
MSI (c) (28:44) [16:15:40:384]: Cloaking enabled.
MSI (c) (28:44) [16:15:40:384]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (28:44) [16:15:40:384]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:2C) [16:15:40:384]: Running installation inside multi-package transaction C:\WINDOWS\system32\install_flash_player_16_plugin.msi
MSI (s) (30:2C) [16:15:40:384]: Grabbed execution mutex.
MSI (s) (30:3C) [16:15:40:384]: Resetting cached policy values
MSI (s) (30:3C) [16:15:40:384]: Machine policy value 'Debug' is 0
MSI (s) (30:3C) [16:15:40:384]: ******* RunEngine:
           ******* Product: C:\WINDOWS\system32\install_flash_player_16_plugin.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (30:3C) [16:15:40:384]: Note: 1: 2203 2: C:\WINDOWS\system32\install_flash_player_16_plugin.msi 3: -2147287038
MSI (s) (30:3C) [16:15:40:384]: MainEngineThread is returning 2
MSI (s) (30:2C) [16:15:40:404]: User policy value 'DisableRollback' is 0
MSI (s) (30:2C) [16:15:40:404]: Machine policy value 'DisableRollback' is 0
MSI (s) (30:2C) [16:15:40:404]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:2C) [16:15:40:404]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (30:2C) [16:15:40:404]: Restoring environment variables
MSI (c) (28:44) [16:15:40:414]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (28:44) [16:15:40:414]: MainEngineThread is returning 2
=== Verbose logging stopped: 18/12/2014 16:15:40 ===

ERROR: You entered a number which is lower than or equal to the package....

Hi ,
I'm doing PREPARE for the upgrade to ECC60 from SAP 4.7 R1, but I have the following error in the phase of including patch.
Any idea ?
ERROR
SAPup> Do you want to search for new packages in directory
sappino\sapmnt\trans\EPS\in" first?
       Because of errors during package extraction, "Search" is recommended.
            - "Search"
            - "Skip"
Enter one of these options [Search] :=
uploading data ...
Please select the Support Packages to include:
                                Support Package Level
Component             min        equi       current    select
[9]
SAP_ABA              <none>     <none>     0009      0009
[9]
SAP_BASIS            <none>     <none>     0009      0009
[9]
PI_BASIS             <none>     <none>     0009      0009
[5]
ST-PI                <none>     0005       0002      0005
[9]
SAP_BW               <none>     <none>     0009      0009
[6]
SAP_AP               <none>     <none>     0006      0006
[7]
SAP_HR               <none>     <none>     0007      0007
[6]
SAP_APPL             <none>     <none>     0006      0006
[6]
EA-IPPE              <none>     <none>     0006      0006
[6]
EA-FINSERV           <none>     <none>     0006      0006
[6]
EA-GLTRADE           <none>     <none>     0006      0006
[7]
EA-HR                <none>     <none>     0007      0007
[6]
EA-PS                <none>     <none>     0006      0006
[6]
EA-RETAIL            <none>     <none>     0006      0006
[6]
EA-DFPS              <none>     <none>     0006      0006
[6]
EA-APPL              <none>     <none>     0006      0006
[6]
FINBASIS             <none>     <none>     0006      0006
[6]
ERECRUIT             <none>     <none>     0006      0006
[6]
SEM-BW               <none>     <none>     0006      0006
[6]
LSOFE                <none>     <none>     0006      0006
      SAPup message
SAPup> ERROR: You entered a number which is lower than or equal to the
              package level which is integrated in this upgrade.
              SAP_ABA - package level (9) too low (integrated package level 9).
              SAP_BASIS - package level (9) too low (integrated package level 9).
              PI_BASIS - package level (9) too low (integrated package level 9).
              ST-PI - package level (2) too low (integrated package level 2).
              SAP_BW - package level (9) too low (integrated package level 9).
              SAP_AP - package level (6) too low (integrated package level 6).
              SAP_HR - package level (7) too low (integrated package level 7).
              SAP_APPL - package level (6) too low (integrated package level 6).
              EA-IPPE - package level (6) too low (integrated package level 6).
              EA-FINSERV - package level (6) too low (integrated package level 6).
              EA-GLTRADE - package level (6) too low (integrated package level 6).
              EA-HR - package level (7) too low (integrated package level 7).
              EA-PS - package level (6) too low (integrated package level 6).
              EA-RETAIL - package level (6) too low (integrated package level 6).
              EA-DFPS - package level (6) too low (integrated package level 6).
              EA-APPL - package level (6) too low (integrated package level 6).
              FINBASIS - package level (6) too low (integrated package level 6).
              ERECRUIT - package level (6) too low (integrated package level 6).
              SEM-BW - package level (6) too low (integrated package level 6).
              LSOFE - package level (6) too low (integrated package level 6).
            - "continue"
            - "cancel"
Enter one of these options [continue] :=
Thank's.

Yes - you have to download them and put them into the directory- that´s the purpose of this phase
Markus

More than one role for a clip.Is it possible?

Is it possible assign more than one role for a clip?
thx

Only one video role, only one audio roll, per clip. Only one as these are "Media Stems", and when you work with Stems, only one roll per asset video, one per asset audio.

When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I t

When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I talk by phone headset

Hi! I have the same problem when I use my headphones .
iPhone 4s England, iOS 6.1.2

Customer line items ledger view in ECC 6.0 other than FBL5N

HI
Is there any other T code for customer line items ledger view in ECC 6.0 other than FBL5N
thanks

Hi Jagadeesh,
There are some bunch of reports avaialble in SAP for customer Lines item display,
S_ALR_87012168 - Due Date Analysis for Open Items
S_ALR_87012197 - List of Customer Line Items
S_ALR_87012173 - List of Customer Open Items for Printing
S_ALR_87012174 - List of Customer Open Items
S_ALR_87012175 - Open Items - Customer Due Date Forecast
S_ALR_87012176 - Customer Evaluation with OI Sorted List
S_ALR_87012177 - Customer Payment History
S_ALR_87012178 - Customer Open Item Analysis by Balance of Overdue Items
S_ALR_87012198 - List of Cleared Customer Items for Printing
S_ALR_87012199 - List Of Down Payments Open On Key Date - Customers
Please check the above mentioned reports
Hope its useful to you
Regards
Saravanan.A

Down payment amount cannot be higher/lower than the preset value Error

Hello. Can anyone help me with this error. When creating a down payment request from a sales order with a billing plan, I get the message 'Down payment amount cannot be higher/lower than the preset value' and the document isn't released to accounting. When creating the sales order, I included a condition type that I created. The billing plan then calculates the down payment request value with the total sum i.e net value plus condition value. Upon creating the down payment request in VF01, I get this message. I did a test and noticed that, if the condition is not included in the sales order, the down payment request is created without errors. How do I correct this? Thanks for you anticipated response.

Hi
As you are getting error, 'Down payment amount cannot be higher/lower than the preset value' ,please check the total value of the document.So in the sales document ,billing plan check what is the invoice value for the first billing date , also check what is the sales order value.Secondly what is the condition type that has been created and for what purpose it is being used.
Regards
Srinath

Any song with a bitrate lower than 96kbps is "Ineligible"

But my problem is, I have some about 950 episodes of speech radio series and allmost 70% is bittrate lower than 96kbps and some about 150 lessons of French language also in bitrate lower than 96kbps. I cann't upload these files to iCloud. Convert it to higher bitrate looks very stupid. Any suggestion?

The generally accepted work-around is to to make an AAC copy within iTunes. If you wanted to use a third party solution to make MP3 files that comply with the minimum bitrate, you could do that instead. I imagine the benefit to MP3 would be smaller files.

Why is the Lumia Icon's ringtone lower than when previewing the ringtone in settings/system/ringtone sounds? (The volume is set at 30 in all cases.)

Why is the Lumia Icon's (929) ringtone lower than when previewing the ringtone in settings/system/ringtone+sounds? (The volume is set at 30 in all cases.)

Hello Lena,
Yes, tried all those things.
After going back and forth with Verizon's "tier 2" technical support over the last 2 days, a chat session with Nokia, no call-backs-as-promised by your technicians, then having them reinstall the phone's software -that didn't fix the problem. So they are sending me a re-manufactured replacement phone. But not a NEW ONE, because I didn't realize the problem within 14 days. You see at first, I just figured the phone had lousy volume, until I was previewing ringtones when setting the alarm clock. The phone is about one and a half months old. I have expressed my desire that a NEW phone be sent, but NO says Verizon.
I've spent enough time, in good faith, Verizon would solve this matter, but in the process of their re-installing the software they've screwed up Backup Assistant.
Thanks.

Hi,have you ever met such problem- one side of the display a bit lower than another,it is new, what should i do ?

Hi,have you ever met such problem- one side of the display a bit lower than another,it is new, what should i do ?

Call Apple Support

How to Prohibit Sales Price Lower Than Material Standard Cost

Hi Moderators:
I got a problem from our sales departement, because they found a manual mistake, that was, somebody who maintained a incorrect sales price in the condition record which was lower than the standard price in the material master data! This must be a error!
My question is, how to customize in SAP system and prohibit to maintain the sales price (LT standard price) in the condition record? Maybe system could issue a "Warning" or "Error" message to the user before saving the changes!
I'm highly appreciated that you can help me to solve the problem. Thanks in advance.
Have a good day and best regards
Z.T

Hi Zhang
If I have understood correctly, you want that, when the "Selling Price" is less then the "Cost" , system should give you warning or should prohibit from futher processing.
That means, system should not allow negative Profit.
If this is the requirement, then you can not set it in the Condition record.
You need to make the settings in the Pricing Procedure.
Go to your Pricing Procedure and for the condition type VPRS(Cost) make the below mentioned settings.
Sub Total - B,
Requirement --- 4'
AltCTy - 5 and save the settings.
Now when you create an order with Negative Profit ( Selling Price is less then Cost),system will give you warning and if you will try to save then system will regard this document as Incomplete.

When i put external speakers to my g72 there's sound but it's lower than if they weren't plugged in

This question is for a HP G72 laptop running Windows 7. When I plugged speakers into the headphone port the sound coming through is actually lower than when no speakers are used? What's the fix!

Hey fisherking,
I see that you're having an issue with the sound when you plug in speakers.
Try this Document and follow the steps toward the bottom starting with the section " select desired speakers or sound device".
THX buddy

"lower than intended output quality: frame blending DISabled"???

When I print to tape, after all conforming processes have finished I get
"Note: The following conditions exist in this sequence which may result in lower than intended output quality.
The following can be adjusted using the Render Control tab in the Sequence Settings:
- Frame Blending For Speed is disabled"
??? Frame blending, if anything, will lower the quality even further?
And, if I turn ON frame blending the warning does not disappear but I get the additional warning
"There are sections that are rendered at proxy quality"
***???

When I print to tape, after all conforming processes have finished I get
"Note: The following conditions exist in this sequence which may result in lower than intended output quality.
The following can be adjusted using the Render Control tab in the Sequence Settings:
- Frame Blending For Speed is disabled"
??? Frame blending, if anything, will lower the quality even further?
And, if I turn ON frame blending the warning does not disappear but I get the additional warning
"There are sections that are rendered at proxy quality"
***???

Schema version is lower than expected value

While configuring the database at Step 3 of 9, it threw me an exception: INST-6177 OIM Schema version is lower than expected value.
Create OIM 11g schema using repository creation utility and proceed with configuration.
Now, Please help me...

For the exception, the trace says that:
[2011-05-19T14:29:10.511+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.oimQueriesHandler.checkForUpgrade] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] [[
[OIM_CONFIG_INTERVIEW] MDS Schema Version is correct
[2011-05-19T14:29:10.527+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.oimQueriesHandler.checkForUpgrade] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] Exiting method executeHandler
[2011-05-19T14:29:10.527+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.oimQueriesHandler.checkForUpgrade] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] [[
[OIM_CONFIG_INTERVIEW] Database is not encryped. This is not an upgrade flow.
[2011-05-19T14:29:10.527+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.oimQueriesHandler.checkForUpgrade] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] Could not fetch the schema version from the database
[2011-05-19T14:29:10.527+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.oimQueriesHandler.checkForUpgrade] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] [[
ERROR ====>>>>:INST-6177
[2011-05-19T14:29:10.527+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.oimQueriesHandler.checkForUpgrade] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] [[
Cause:OIM Schema version is lower than the expected value
[2011-05-19T14:29:10.527+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.oimQueriesHandler.checkForUpgrade] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] [[
Action:Create OIM 11g schema using Repository Creation Utility and proceed with configuration.
[2011-05-19T14:29:10.527+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.oimQueriesHandler.checkForUpgrade] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] [[
[OIM_CONFIG_INTERVIEW] Retrieving default locale set in the machine.
[2011-05-19T14:29:10.527+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.oimQueriesHandler.checkForUpgrade] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] Exiting method executeHandler
[2011-05-19T14:29:10.527+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] Handler launch end: oimQueriesHandler.checkForUpgrade
[2011-05-19T14:29:10.527+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] Handler returned status: FAILED
[2011-05-19T14:29:10.527+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000J08SN_J6UOYFLrvH8A1DpHfc000002,0] Error in validating schema details

ECC 6.0 (lower than EhP4) 里没有Role SAP_LO_SD_ORDER_MANAGEMENT

Similar Messages

Maybe you are looking for