ECCS 6 CONSOLIDATION SET FOR REPORT PAINTER

Hi
I am configuring the Report Painter for the reports on ECCS consolidation. In the T CODE CXSA creating sets there is concept of formual.
Ecaxtly what i want is that, i want to spilt the value of a FS ITEM into 2 Account Group at the rate of 60% and 40%.
and for that i want to us Formula in the creation of Sets. Can anyone please tell me how this formual works.
Thanks & Regards
Krish

Hi
In a report painter report - Once you have created a SET means you know for what values you want to execute the report...
In your form definition, you will see two check boxes beside your characteristic - i.e. One for Defining a variable for the char and the Other for using a SET..
If you want to use a variable - this means you would specify the values of the projects at the time of execution... For this, click on the relevant check box and you can specify any name in the field "Local Variable"
If you want to use a SET, this means you know for what projects you would like to see the report.. For this, check on the relevant check box and specify your SET there...
If you want to use both the above options, then you must create your set from GS11 and choose the radio button SET VARIABLE
Refer the set 1KOSET from GS13 as a sample...
And see report 1SIP-001 under library 1VK in GRR3.. This report uses 1KOSET under General Data Selection.... You will get an idea for what you want
Regards
Ajay M

Similar Messages

Mass Change of Sets for Report Painter/Writer Reports

Hi,
We have upgraded our system from 4.6c to ECC 6.0. We are using more
than 40 Report Painter/Writer reports which in turn are using Sets.
However, these sets are containing reference to a Table which we want
to change for all the set enmasse. e.g. If currently the sets are using
Table Reference "ABC", we want to change it to "XYZ" because the
table "ABC" is not at all existing in our new system ECC 6.0.
Even we are unable to change the sets through T.Code GS02 as the table
itself is not existing. And as the table is not existing, the Reports
are giving hard errors saying that the sets do not exist.
Kindly request you to guide us in this regard.
Thanks in advance,
Shalin Shah

Looks like you have to create new sets and assign them in the report replacing the old ones.

Projects group/set for report painter

Dear,
I want to create a report painter report to compare cost of projects.
I would like to be able to create groups for my projects, like you can do for internal order with KOH1, and use these for my report.
how can I create these project groups and how do i use them in report painter?
Kind regards,
Sander.

Hi
In a report painter report - Once you have created a SET means you know for what values you want to execute the report...
In your form definition, you will see two check boxes beside your characteristic - i.e. One for Defining a variable for the char and the Other for using a SET..
If you want to use a variable - this means you would specify the values of the projects at the time of execution... For this, click on the relevant check box and you can specify any name in the field "Local Variable"
If you want to use a SET, this means you know for what projects you would like to see the report.. For this, check on the relevant check box and specify your SET there...
If you want to use both the above options, then you must create your set from GS11 and choose the radio button SET VARIABLE
Refer the set 1KOSET from GS13 as a sample...
And see report 1SIP-001 under library 1VK in GRR3.. This report uses 1KOSET under General Data Selection.... You will get an idea for what you want
Regards
Ajay M

Change the default setting for report painter reports.

HI All
Can we change the default setting in SAP/R3 in the report painter reports for the selection screen options?
If yes,Please let me know how we can change the default settings.
Thanks in Advance
Best regards
Venu

HI
We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
How and where do we set or change the default parameters for the selection screen ?
Thanks in advance
Best Regards
Venugopal

Attaching Variable to the Library for Report Painter for Cost center report

Hi,
I want to attach the Variable - "Cost element group" to the Library for Report Painter for getting Cost center report. The Cost center report should be cost element group wise with actaul, budget and variance. Please let me know the process.

hi..
I think you have to first define Attribute mis as "V" in Cost element master basic data tab for the elements you want to capture as varible.
Then make a Cost element group / set in KAH1/GS01 and use it in your report.
kkumar

Output on center for report painter

Dear Techis,
From report painter output i m printing thru spool request i m getting output as at left side but
i want it to come as center , so anybody pls tell me where i have to make setting at report painter
or somewhere else..
Pls do the needful
Rewards For helpful ans .
Rgds
Santo..

Hello Clemens,
as soon as the report is associated to a transaction code, it should be in TSTC
Not necessary
You create a parameter transaction when attaching a tcode to a report painter report which gets stored in TSTCP.
Cheers,
Suhas

Creating Tcode for report painter program in 4.0B version?

hi all,
How to create a tcode for report painter program in 4.0 B?
I searched the forums. but i couldn't find the same for 4.0 B?
Please helo me to solve this?
Thanks,
Vamshi

I am closing as no one answered and worked in alaternative way for the requirement.

Assign Transaction Code for Report Painter generated program

I am trying to assign a transaction code for report painter generated program... I assigned the transaction code in Development for the generated program but the program name changes in every system and I get a runtime error...
Can you please guide me on how to handle this problem

http://dap-consulting.com/yahoo_site_admin/assets/docs/Report_Painter_Reports.47142031.pdf
Found my answer in the above link

DB Table for Report Painter

Hi all,
Can anybody please let me know in which db table the details of the Report Painter are stored?
If I have a Transaction Code, I want to know if that transaction code is created for Report Painter or not through program not through SE93.
I have to create a report on all Z Transaction Codes.
Thanks in advance.

Hi Mr.A ,
while creating tcode for report painters we will take option PARAMETER Transaction code , so based on the transaction type u can find out from the same tables - TSTCP or TSTC.
regards
Prabhu

T-code for Report painter.

Hi
can anyone tell me, Is there any transaction code for report painter or it is an external tool.??
Thanks
Utpal

Hi,
Please check this transaction codes.
GR31/32/33 - Create/Change/Display Report
GR51/52/53 - Create/Change/Display Report Group
Regards,
Ferry Lianto

Configuration doc for Report painter

Hi Friends,
Can any one send configuration document for Report painter?
[email protected]
Regards
Babu

hi
find this link
http://www.virtuosollc.com/PDF/Get_Reporter.pdf

Tcode for Report painter

Hello All,
when m trying to create a tcode for report painter through se93 its show erre for D_SREPOVARI-EXTDREPORT parameter,m felling the parameter with the value gatting from table TKEB1,-APPLCLASS /SUBCLASS /TABNAME 23 space / REPID.error is do not use blank char. Suggest Please and please give some idea about how to copy a stand. report painter and change the Z according to client requirement.
Thanks
Sam

Hi,
I will suggest you to execute the transaction START_REPORT and put the report type report and ext. name. If it executes well over here then you can create a transaction using SE93
Something like this
Default value for transaction ‘START_REPORT’
In    bellow default value section insert default value
SREPOVARI-REPORTTYPE      = AQ      "Parameter    indicating Abap Query
D_SREPOVARI-REPORT           = ZY_CS_ALLSLS   "Query    User group
D_SREPOVARI-EXTDREPORT= ZY_SLS_MST_001     "Query name
Hope this helps.
Thanks,
Tooshar Bendale

Add in Library for Report Painter/Writer 9PCC

Hi SAP,
I need to include in Library for Report Painter/Writer the component 9A2 CO-OM-IS-BP Business processes: Special reports because I need to run 9PCC, but 9PCC don't exist in my system.
Would I like know if it exist the SAP note include in Library?
Best regards,
Edited by: Fabio Gil on Jul 1, 2010 6:35 PM

Hi,
You can create a library via GR21 transaction. What tables do you want to join? Depending on this, one can tell whether it's possible or not.
You can search for available info on the forum; similar questions were already asked.
Regards,
Eli

Create t.code for report painter in CO-PA

Dear experts!
Now, I'm getting some issue about creating t.code for report painter in CO-PA.
Really, I don't know to create t.code for report painter that is created and run in t.code KE30.
Help me to solve the issue!
Best regards, Huy

Dear Huy,
To create a tcode for report created on the KE30:
1 - Get the parameters from your Z report, on table TKEB2 (on field REPID)
2 - On the SE93 create your tcode with option "Transaction with parameters"
2.1 - On the field "Transaction" fill with START_REPORT
2.2 - Choose the option "Skip inicial screen" and "Inherit GUI attibutes"
2.3 - On "Default Values" use the follow parameters:
D_SREPOVARI-REPORTTYPE <RE>
D_SREPOVARI-REPORT <NULL>
D_SREPOVARI-EXTDREPORT <APPCLASS SUBCLASS+TABNAME REPID>
*This information you got in table TKEB2, eg:
KE 01CE1CPFL ZDREB01
I hope the information has been useful,
Regards,
Melina

Create T.Code for Report painter- report (GRR1)

Hi Experts,
I have created report in report painter( T.code - GRR1) using 1vk library, now i want to have a transaction code for my new report.
So, How can i create a T.code for customized report in GRR1.
Thanks
Raj

Dear Raj,
Hope this link will help you.
http://home4sap.com/Blog/2009/08/how-to-create-a-transaction-code-for-report-painter-reports/
Thanks and regards
Praveen.J

ECCS 6 CONSOLIDATION SET FOR REPORT PAINTER

Similar Messages

Maybe you are looking for