ECCS - Combining statutory and management reporting thru ECCS
Hi,
We use ECCS for Company based consolidations. Our statutory reports are from ECCS and Management reports are from PCA. We want to combine these 2 and use ECCS for both kinds of reporting. However, the challenge we have is we don't have the PC in Company based consolidation.
We want to bring in PC as an attribute to enable management reporting out of ECCS. I am trying different options to pull in PC to ECCS. I have the following questions in this regard.
1. Has any one ever tried this before?
2. What are the best practices (Modify exisitng dimension or create a new one etc..)
3. Is there a brief how-to document that you can share with me.
Please let me know your thoughts.
Best Regards,
Similar Messages
-
COnfiguring MSS Iviews ECC 5.0 and BP 60.1.2
HI All,
I am trying to configure reports on portal with ECC 5.0, BP for manager 60.1.2 and portal 7.0.
I am having trouble in locating the right Iview which I cna modify properties to pull the ABAP reports for SAP query.
Can any one tell me which Iview I need to configure. I know for ECC 6.0 it would be laund pad Iview.
The role in ecc 5.0 is com.sap.pct.mss.roles > <b>MANAGER</b>
DId any one work on this enviroment before does ECC 5.0 support Manager reports? if it does can you please give me which Iview I can set the application properties.
Right now, on my staff>reporting > selection criteria> Here, I see no data found. I am sure here for this iview some properties need to be set so data can be visible from sap query. Just want to know exactly what property to change.
Thanks and highly appreciate your help.
Rajsearch for iview with ID.
com.sap.pct.hcm.rpt_reportselection
open it to edit properties.. open object... select parameter Scenario and enter Scenario name MDT or whatever is applicable.
Hope this helps,
Rgds -
Install ECC 6.0 and Solution Manager on same server Error (MaxDB/Linux)
I have installed Solution manager on one server and then ECC 6 also in the same server with another SID. during the installation it errored out at phase "SLD configuration" with UME error , J2EE_ADMIN locked etc..we checked the user id and noticed it got locked in ECC 6 system and we unlocked it.
But after the ECC installation the solution manager java engine is not coming up error with "com.sap.security.core.ume.service failed" error. Prior to the ECC installation the Solution Manager J2EE was working.
thanks in advance
Mathewerror in the /j2ee/cluster/server0/log/defaultTrace.1.trc
is as follows
#1.5#00137256A483001E0000001700006F190004163784D40864#1150327614343#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_61##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
When I looked at using jcmon the dispacher is up and the server0 and SDM is down -
Need knowledge on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query
please give me some ideas and useful links on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query
Hi Jaya,
Not very clear with your question.
Are you looking for changes in areas od ABAP reports & SAP query when we upgrade SAP from 4.7 to ECC 6.0 ??
If the response is YES, then please refer to SAP solution browser www.sapsolutionbrowser.com
Define source release and target release .
You will get module wise details on new features for target release.
Hope this helps.
Regards,
Deepak Kori -
Different Chnage management Tables in ECC and relation
Dear BW/ECC experts..
I wish to find out if you have any document or link to read on the change management tables in ECC in relation to BW.
Like JEST/JCDS tables gives Changes to USER/SYSTEM status change....
JEST
JCDS
CDHDR
CDPOS
AENR
AEOI
I know this may not be directly relavant for BI/BW but some of you might have already gone thru this process.
Thank you in advance.Hi,,,,,,, you Can refer the below links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0002c1c-f07c-2c10-3c93-b053715529b4?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00f47333-a50e-2e10-a7bf-d0ab463da382?quicklink=index&overridelayout=true -
Background job failing - ECC 6.0, Solution Manager 7.0
Dear All,
Four days back, I have installed the Solution Manager 7.0 and ECC 6.0 on
HPUX IA64 hardware with database as Oracle 10.2.0.2.0 (Unicode).
In both server, latest kernel patch has been applied.
The Support package versions are (both server):
KERNEL (Release 700) 146
SAP_BASIS 0014
SAP_ABA 0014
PI_BASIS(2005_1_700) 0014
ST-PI 0005
SAP_BW 0016
While checking the the jobs from SM37, in both the server,
I am observing that following jobs are always failing with
same reason:
SAP_COLLECTOR_FOR_PERFMONITOR
=============================
Date Time Message text Message class Message no. Message type
========== ======== ====================================================================== ============= =========== ============
15.05.2008 06:25:12 Job started 00 516 S
15.05.2008 06:25:12 Step 001 started (program RSCOLL00, variant , user ID BGDUSER) 00 550 S
15.05.2008 06:25:18 Clean_Plan:Cleanup of DB13 Plannings DB6PM 000 S
15.05.2008 06:25:18 Clean_Plan:started by RSDBPREV on server gcbeccd DB6PM 000 S
15.05.2008 06:25:18 Clean_Plan:Cleaning up jobs of system RD3 DB6PM 000 S
15.05.2008 06:25:18 Clean_Plan:finished DB6PM 000 S
15.05.2008 06:25:18 Database system not supported S1 101 S
15.05.2008 06:25:36 ABAP/4 processor: DBIF_DSQL2_SQL_ERROR 00 671 A
15.05.2008 06:25:36 Job cancelled 00 518 A
SAP_REORG_UPDATERECORDS
=======================
Date Time Message text Message class Message no. Message type
========== ======== ===================================================================== ============= =========== ============
14.05.2008 00:31:01 Job started 00 516 S
14.05.2008 00:31:01 Step 001 started (program RSM13002, variant SAP&001, user ID BGDUSER) 00 550 S
14.05.2008 00:31:01 Reorganization of update date not allowed in batch 15 100 A
14.05.2008 00:31:02 Job cancelled 00 518 A
SAP_WP_CACHE_RELOAD_FULL
========================
Date Time Message text Message class Message no. Message type
========== ======== ============================================================================================ ============= =========== ============
15.05.2008 00:30:11 Job started 00 516 S
15.05.2008 00:30:11 Step 001 started (program RWP_RUNTIME_CACHE_RELOAD, variant SAP&RELOAD_ALL, user ID BGDUSER) 00 550 S
15.05.2008 00:30:11 No component system chosen URL_GEN_MSGS 031 E
15.05.2008 00:30:11 Job cancelled after system exception ERROR_MESSAGE 00 564 A
Please help to resolve this issue.
Thanks in advance.
Regards
Sudip GhoshHi Markus,
Thanks for the reply.
Below is the dump:
======
======
Runtime Errors DBIF_DSQL2_SQL_ERROR
Date and Time 15.05.2008 06:25:36
Short text
An SQL error occurred when executing Native SQL.
What happened?
The error 3113 occurred in the current database connection "DEFAULT".
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
How to correct the error
Database error text........: "ORA-03113: end-of-file on communication channel"
Database error code........: 3113
Triggering SQL statement...: "FETCH NEXT "
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_DSQL2_SQL_ERROR" " "
"RSORAVSH" or "RSORAVSH"
"FILL_DBVSE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "gcbeccd"
Network address...... "10.10.4.158"
Operating system..... "HP-UX"
Release.............. "B.11.23"
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 15
Shortdump setting.... "full"
Database server... "gcbeccd"
Database type..... "ORACLE"
Database name..... "RD3"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 5 2008 00:55:24"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 146
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "HP-UX B.11"
Memory consumption
Roll.... 1117216
EM...... 0
Heap.... 0
Page.... 32768
MM Used. 695792
MM Free. 400816
User and Transaction
Client.............. 000
User................ "BGDUSER"
Language key........ "E"
Transaction......... " "
Transactions ID..... "482B8A4C89F0442BE10000000A0A049E"
Program............. "RSORAVSH"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "RSORAVSH" - in "FILL_DBVSE".
The main program was "RSORAVSH ".
In the source code you have the termination point in line 48
of the (Include) program "RSORAVSH".
The program "RSORAVSH" was started as a background job.
Job Name....... "SAP_COLLECTOR_FOR_PERFMONITOR"
Job Initiator.. "BGDUSER"
Job Number..... 05251100
Source Code Extract
Line
SourceCde
18
INCLUDE STRUCTURE v_system_event_struc.
19
DATA: END OF v_system_event_tab .
20
21
check sy-dbsys(3) = 'ORA' .
22
23
Get the new snapshots
24
25
PERFORM fill_dbvse TABLES v_system_event_tab.
26
27
28
Get the old snapshots from database table MONI
29
30
startday = sy-datum - days_to_keep .
31
32
33
Save new data now (otherwise these data will be selected twice)
34
35
CONCATENATE 'SYSEVENT' sy-datum sy-uzeit INTO monikey .
36
37
EXPORT sy-datum
38
sy-uzeit
39
v_system_event_tab
40
TO DATABASE moni(db) ID monikey .
41
42
*& Form FILL_DBVSE
43
44
FORM fill_dbvse TABLES v_system_event_tab.
45
date = sy-datum .
46
time = sy-uzeit .
47
EXEC sql performing append_v_system_event .
>>>>>
select event,
49
total_waits,
50
total_timeouts,
51
time_waited * 10,
52
average_wait * 10
53
into :v_system_event_struc
54
from v$system_event
55
ENDEXEC .
56
ENDFORM. " FILL_DBVSE
57
58
59
*& Form APPEND_V_SYSTEM_EVENT
60
61
FORM append_v_system_event.
62
v_system_event_tab-date = date .
63
v_system_event_tab-time = time .
64
65
MOVE-CORRESPONDING v_system_event_struc TO v_system_event_tab.
66
APPEND v_system_event_tab .
67
ENDFORM. " APPEND_V_SYSTEM_EVENT
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
16
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report for Collecting Data from V$SYSTEM_EVENT Hourly
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080515
SY-UZEIT
062520
SY-XPROG
RSDBRUNT
SY-XFORM
%_INIT_PBO_FIRST
Active Calls/Events
No. Ty. Program Include Line
Name
2 FORM RSORAVSH RSORAVSH 48
FILL_DBVSE
1 EVENT RSORAVSH RSORAVSH 25
START-OF-SELECTION
Chosen variables
Name
Val.
No. 2 Ty. FORM
Name FILL_DBVSE
SY-REPID
RSORAVSH
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5545455422222222222222222222222222222222
23F2163800000000000000000000000000000000
V_SYSTEM_EVENT_STRUC
00000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222222222222222220000000000000000
0000000000000000000000000000000000000000000000000000000000000000000C000C000C000C
%_SPACE
0
0
2
0
SY
###############################################################################T######## ####
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000400
000001000000000000000000000000000000000F000000000000000000000000000000000000010500000005220000
000000000000000000000000010001000000000E00000000000000000000000000000000000006040000000800000C
No. 1 Ty. EVENT
Name START-OF-SELECTION
SY-LDBPG
SAPDB__S
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454455522222222222222222222222222222222
31042FF300000000000000000000000000000000
%_DUMMY$$
0000
0000
2222
0000
SY-DBSYS+0(6)
ORA
000
000
454
F21
SYST
###############################################################################T######## ####
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000400
000001000000000000000000000000000000000F000000000000000000000000000000000000010500000005220000
000000000000000000000000010001000000000E00000000000000000000000000000000000006040000000800000C
V_SYSTEM_EVENT_TAB[]
Table[initial]
V_SYSTEM_EVENT_TAB
00000000000000 ################
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3333333333333322222222222222222222222222222222222222222222222222222222222222220000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000C000C000C000C
SY-DATUM
20080515
00000000
00000000
33333333
20080515
DAYS_TO_KEEP
30
0001
000E
STARTDAY
00000000
00000000
00000000
33333333
00000000
MONIKEY
0000000000000000000000
0000000000000000000000
2222222222222222222222
0000000000000000000000
SY-UZEIT
062520
000000
000000
333333
062520
SYST-REPID
RSORAVSH
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5545455422222222222222222222222222222222
23F2163800000000000000000000000000000000
MONI-CLUSTR
0
00
00
MONI
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222220022000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Internal notes
The termination was triggered in function "ExecuteCall"
of the SAP kernel, in line 1190 of the module
"//bas/700_REL/src/krn/runt/abexsql.c#2".
The internal operation just processed is "DSQL".
Internal mode was started at 20080515062520.
Internal call code.........: "[DBDS/NEW DSQL]"
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(0) 0x4000000003b2b450 CTrcStack + 0x1b0 at dptstack.c:227 [dw.sapRD3_DVEBMGS00]
(1) 0x4000000004d2c470 Z16rabaxCStackSavev + 0x1d0 [dw.sapRD3_DVEBMGS00]
(2) 0x4000000004d32160 ab_rabax + 0x3570 [dw.sapRD3_DVEBMGS00]
(3) 0x40000000047b51e0 Z10abdbdserriPKtiS0_P9DS_HEADERS0_iPv + 0x470 [dw.sapRD3_DVEBMGS00]
(4) 0x4000000003d777f0 Z11ExecuteCallv + 0x11f0 [dw.sapRD3DVEBMGS00]
(5) 0x4000000003d7e7b0 Z8abjdsqlv + 0x1b0 [dw.sapRD3_DVEBMGS00]
(6) 0x400000000402f190 Z8abextriv + 0x440 [dw.sapRD3_DVEBMGS00]
(7) 0x4000000003f53bc0 Z9abxeventPKt + 0x3c0 at abrunt1.c:339 [dw.sapRD3_DVEBMGS00]
(8) 0x4000000003d9f210 Z8abtriggv + 0x110 at abrunt1.c:58 [dw.sapRD3_DVEBMGS00]
(9) 0x4000000003d9ebe0 ab_run + 0xc0 [dw.sapRD3_DVEBMGS00]
(10) 0x4000000001caa820 N_ab_run + 0x20 at dymainstp.c:4739 [dw.sapRD3_DVEBMGS00]
(11) 0x4000000001cb40f0 dynpmcal + 0x3f0 at dymainstp.c:2281 [dw.sapRD3_DVEBMGS00]
(12) 0x4000000001caf260 dynppai0 + 0xcb0 at dymainstp.c:1107 [dw.sapRD3_DVEBMGS00]
(13) 0x4000000001cb1ec0 dynprctl + 0x340 at dymainstp.c:358 [dw.sapRD3_DVEBMGS00]
(14) 0x4000000001c9dff0 dynpen00 + 0xac0 at dymain.c:1628 [dw.sapRD3_DVEBMGS00]
(15) 0x4000000001fea460 Thdynpen00 + 0x510 at thxxhead.c:4830 [dw.sapRD3_DVEBMGS00]
(16) 0x4000000001fb54e0 TskhLoop + 0x5520 at thxxhead.c:3945 [dw.sapRD3_DVEBMGS00]
(17) 0x4000000001faae40 ThStart + 0x460 at thxxhead.c:1164 [dw.sapRD3_DVEBMGS00]
(18) 0x4000000001569ec0 DpMain + 0x5f0 at dpxxdisp.c:1088 [dw.sapRD3_DVEBMGS00]
(19) 0x4000000002c10630 nlsui_main + 0x30 [dw.sapRD3_DVEBMGS00]
(20) 0x4000000002c105c0 main + 0x60 [dw.sapRD3_DVEBMGS00]
(21) 0xc00000000002be30 main_opd_entry + 0x50 [/usr/lib/hpux64/dld.so]
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
RSORAVSH
0
30.03.2005
10:21:59
19456
E
1
Prg
SAPMSSY0
1
17.12.2007
15:41:05
92160
E
2
Prg
SAPMSSYD
1
12.09.2006
11:33:31
21504
E
3
Prg
SAPFSYSCALLS
1
09.09.2004
14:18:32
8192
E
4
Prg
RSDBRUNT
0
17.12.2007
16:04:40
254976
E
5
Typ
RSSCR
0
30.03.2005
10:21:45
5120
6
Prg
RSDBSPBL
0
30.03.2005
10:21:58
72704
E
7
Prg
SAPDB__S
0
30.03.2005
10:22:01
19456
E
8
Prg
RSDBSPMC
0
12.09.2006
11:25:01
79872
E
9
Typ
DDSHDESCR
0
03.09.1997
03:05:16
4096
10
Typ
SPPARAMS
0
07.05.1997
13:10:38
2048
11
Prg
SAPLSABE
11
09.09.2004
14:18:36
13312
E
12
Prg
SAPLSECU
12
17.12.2007
15:31:45
87040
E
13
Typ
RSSUBINFO
0
14.10.1999
22:01:03
3072
14
Prg
SAPLSTUP
14
17.12.2007
15:29:58
74752
E
15
Prg
SAPLCNDP
15
11.09.2007
15:24:45
195584
E
16
Prg
SAPLSCNT
16
18.02.2005
14:16:06
30720
E
17
Prg
SAPSHDTV
16
05.01.2005
16:26:16
33792
E
18
Prg
SAPFGUICNTL
1
18.02.2005
14:15:08
24576
E
19
Prg
SAPLOLEA
19
11.09.2007
11:17:30
96256
E
20
Prg
SAPLSGUI
20
17.12.2007
15:41:05
84992
E
21
Prg
SAPLSTTM
21
05.07.2005
13:10:18
69632
E
22
Prg
SAPLSBDC
22
17.12.2007
15:30:54
44032
E
23
Prg
SAPLSFES
23
17.12.2007
16:04:40
260096
E
24
Prg
SAPLTHFB
24
17.12.2007
15:41:05
394240
E
25
Typ
WPINFO
0
26.02.1999
14:49:01
6144
26
Prg
SAPLURFC
26
17.12.2007
15:37:35
22528
E
27
Prg
SAPLSPLUGIN
27
09.09.2004
14:18:36
8192
E
28
Typ
SWCBCONT
0
15.11.2000
17:55:11
3072
29
Typ
OLE_VERBS
0
04.04.1995
16:02:20
2048
30
Typ
OLE_PA
0
04.04.1995
16:02:19
2048
31
Typ
SYST
0
09.09.2004
14:18:12
31744
32
Typ
MONI
0
31.03.2004
16:41:21
5120
Directory of Application Tables
Name Date Time Lngth
Val.
Program RSORAVSH
SYST 09.09.2004 14:18:12 00004612
\0\0\0\0\0\x0010\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0
MONI . . : : 00002944
\0\0 \0\0\0\0\0\0\0\0\0\0\0\0\0\0
ABAP Control Blocks (CONT)
Index
Name
Fl
PAR0
PAR1
PAR2
PAR3
PAR4
PAR5
PAR6
Source Code
Line
71
PAR2
03
0000
0014
002B
RSORAVSH
37
73
PAR2
03
0000
0015
002D
RSORAVSH
37
75
PAR2
03
0000
0016
0026
RSORAVSH
37
77
00
0000
RSORAVSH
37
78
PERP
00
0002
RSORAVSH
44
79
PERP
1C
0000
RSORAVSH
44
80
PERP
04
0000
RSORAVSH
44
81
mvqk
10
0005
0044
04EC
RSORAVSH
45
83
mvqk
0C
0005
0054
052E
RSORAVSH
46
85
DSQL
00
0017
RSORAVSH
48
86
DSQL
01
0018
RSORAVSH
48
87
DSQL
04
0025
RSORAVSH
48
>>>>>
DSQL
16
0025
RSORAVSH
48
89
BRAN
05
0004
RSORAVSH
48
90
perf
00
000A
RSORAVSH
48
91
PERP
80
0000
RSORAVSH
48
92
BRAX
00
FFFC
RSORAVSH
48
93
DSQL
23
0000
RSORAVSH
48
94
ENDF
00
0000
RSORAVSH
56
95
00
0000
RSORAVSH
56
===========
===========
Please check and advise.
Also, I am trying to search for the note 6083 in market place, but not getting the same.
Please advise.
Thanks & Regards
Sudip -
Crystal Report against ECC 6.0 with SSO configured
I created a simple report against the ECC 6.0 Article table and saved it to InfoView. I can run the report fine, but when others run it they get an error stating the logon parameters are incomplete. We are in the process of configuring single sign on and have created other Crystal Reports going against ECC 6.0 with Business Views where SSO turned on in the data connection. Everyone can refresh those reports with no problems. Is their some report setting that needs to be set for Crystal Reports using a data source directly against ECC 6.0 tables?
We have multiple reasons for implementing SNC.
The main reason we have enabled SNC is to simply the users experience while working in the SAP environment. We are going live this month with Plant Maintenance, SRM, Project System, General Ledge and Asset Management reporting cubes in our BW environment as well as in our ECC 6.0 environment. We have set up SAP Portal and have created iviews to BOBJ folders and reports. Users are authenticated once by logging on to the Lan. Once logged on we would like them to seemlessly run SAP transactions and Business Objects reports through the SAP Portal based on their job function. Each user has security setup in BOBJ and SAP to allow access to transactions and reports appropriate for their job function.
We have three types of SAP reports and data connectors.
- One set of Crystal reports go against ECC 6.0 through Business Views with a Data Connection set up for SSO.
- One set of WEBI reports goes against BW queries though Universe Connections set up for SSO.
- One set of Crystal reports go directly against ECC 6.0 tables.
We currently have two issues:
1) The Crystal reports going directly against ECC 6.0 tables are returning the error
Error - The database logon information for this report is either incomplete or incorrect.
2) When we send a link to any report using OpenDocument if the user is not logged on to InfoView they get a rather long error message:
Account Information not recognized: Active Directory Authentication failed to log you on. Please contact your system admin....
Our hardware and server setup is a load balancer connected to a cluster of two Tomcat servers connected to two BOBJ servers. -
How to generate CCMS report from ECC system
Hi,
I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0. How can i generate CCMS report for my SRM system from ECC system. Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Regards,
Pradeep JPradip_jag12 wrote:
> I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0.
>Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Hi,
Contradicting statements.
However check the link for CCMS Configuration:
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
Ideally the CEN system should be a double stack i.e. best if its a solution manager.
Regards,
Srikishan -
Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM
Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich WortmannI would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use. -
Problems in Z Reports in ECC 6.0
Hi,
We r upgrading the SAP from 4.7 E to ECC 6.0 and facing few problems in Z Reports in New Version..Like...
1)..Incorrect value in the dynamic table..
2)..Literals that take up more than one line not permitted.
3)..Missing parameter with PERFORM.
4)..Error in ASSIGN statement in program "SAPLSDSD".
5)..Not Unicode Convertible.
Please help me out of these problems..
Regards,
AnilHi,
regarding your problems the solution is that in ECC 6.0 the programs should be unicode compatible.the fields which are declared with type
were no more allowed in 6.0.
regarding unicode u can check the following threads..
What is the Use of Unicode Check
SDN Wiki - Standard Reference for Unicode Migration-Common ABAP Errors & Solution
SDN Wiki - Standard Reference for UNICODE PROBLEMS and SOLUTIONS -
R/3 upgrade from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0
Is there a reason to upgrade Solution Manager from 3.2 to 4.0 when upgrading R/3 from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0?
And when in current situation Unicode UTF8 is used, could that give problems during / after the upgrade?Hello ALex,
There is not a must to upgrade also your solman 3.2 when you upgrade your satellites, only consider if you need the solman diagnostic or not and also that the new functionality in solman 4.0.
Which system is unicode, the satellite?
There is also not problems having a non-unicode solman with unicode satellites and the other, having a unicode-solman "linked" to unicode-satellites.
Hope this helps,
Dolores -
[HELP] Could you please give me a solution to BW reports of ECC purchasing
Hey, guys,
I want to do some customized spend analysis reports of MM purchasing.The purchasing data will be retrived from 2 source systems ( 1 is ECC 6.0 and the other is R/3 4.6c ) And these reports should be viewed by "commodity" , however, there is no commodity code maintained in material master data.
So my solution is :
1. to find a idle field in material master data to maintain this "commodity", this could be flexible for me, however, it's not easy to push other guys to do this. ( I don't have the authority to do the master data maintainence.)
2. to maintain a mapping table in BW, and material and commodity(also description)should be the fields of this table. However, I don't think it's a good way. Because, this table is not easy to maintain and synchronized.
<b> Could you please give me any suggestion for this situation. Is there any good solution to my question? </b>
Thanks a lotfirst things first .. if they want a report by commodity .. ask them to maintain it ..
1. if you can make the guys maintain commodity in a idle field, you can as well make them enhance the material master and add a new field ... its upto the flexibility u have
2. i dont think thats a bad idea.. but i would prefer somebody maintain the same mapping table in source system and ask them to RFC it to BI .. so that u can use it as a look up table ... -
Report Painter ECC 6.0 Issue.
We are running on ECC 6.0 and we are having a very critical problem in
a report painter report.This issue is very urgent for us here.
The description is as follows:
We are running a Report Painter report in GR55 and executing it.The
report has cost center data on the different company codes which are
the columns in the report. Somehow we are getting the same data
displayed for all the company codes.
Initially when i tried to run the report , it gave me the message
Message no. KCRP026
Characteristic 'BUKRS' does not exist and will be deleted from the form.
In our previous version 4.6c we never had any problem.This problem came
after the upgarde was done.
Thanks
srikanth.Hello,
you did not provided enough information but I guess you
should check first of all in your library (1VK?) if the char
is flagged or not... probably you did that in your previous release
br, -
ECC 6.0 HCM / Crystall Reports
Hello :
I would like to know if we can use CR2008 with HCM in some scenarious instead of Standard SQ01/SQ02/SQ03 and infosets queries.
If am aware that we need ODBC if we connect with Access or any other source.
How do we connect ECC 6.0 with Crystall reports.
Can some one provide me steps to connect Crystall reports to use tables in ECC 6 eg: any Tables in T OCE SE16 with PA0001 etc.
ThanksHello,
Not sure what all those acronyms are but possibly if they are SAP data sources then you should post your question to the Integration Kit forum here:
BusinessObjects Integration Kits
If not then typically if you use ODBC CR can report off the data sources, otherwise please explain what those mean?
Thank you
Don -
Upgrading from 4.7 to ECC 6.0 And GTS 2.0 to a newer version
Hi everyone,
I am new to SAP SD, I am involved in upgrading from R/3 4.7 to ecc 6.0 and GTS 2.0 to a newer version. Can somebody tell me the major differences in these two vesions and also some link through which I can get some info. It is very urgent.
Thanks.Dear Paranidharan Gandhi,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP
ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target
Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word
document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details
Maybe you are looking for
-
Sales orders from one salesorg. to another in same ssystem
Hi Guys, I got a requirement like we need to convert or recreate sales orders from one sales organization to another sales organization in the same system without having any impact on the existing system. Any one have idea how to do it and
-
Possible to have large text in 4k with Mac pro?
Hello, I have a need to view details with my photo editing tasks, so I'm considering a 4k monitor at the moment. However, I've been told that if I actually run the resolution at 4k, the rest of the OS will be extremely small text. Is there a way to h
-
XML-Type and reference to unavailable DTD causes validation problems
Hi, I'm fairly new to Oracle's XML features. I've created a view that produces XML from a number of tables. The resulting XML is used to be stored on a web site for download by customers (this is a manual process about once a week via a CMS). It cont
-
KKS1- Target cost version found zero
Hi, We are using PPPI route for the creation of Process order..plant person convert planned order to process order, but due to some reason they can not confirm that order and finally without GR/GI they can do TECO the order...Now at the month end whe
-
My skype no shows Line Busy Always
Hello, I have got Skype No for US [number redacted for privacy] forwarded to my Indian mobile no. However, if someone calls this no it always shows "Line Busy". Ideally, it should forward calls to my Indian mobile and also offer Voice Msg options..