Ecess and S & H Cess not reflect in Excise Registers(J1iin)

Hi All,
Ecess and S & H Cess not reflect in Excise Register J1iin, only Excise duty is reflected. I maintain the conditon type for Ecess--JECS. In my understanding  no conditon record for S & H Education cess.
I copied Ecess condition type and maintain the S & H Education Cess Condtion type(JEC1). i checked all the settings its ok but in Jiin register not reflect Ecss and Secondary Education cess. Plz help me.
Thanks and regards
Chandra

hi,
Please do check the T-code u r using is wrong .
it is not J1IIN to view registers
it is J2I6
hope u are doing purchase cycle not sales cycle
regards,
sujit

Similar Messages

  • Education Cess and Sec Edu Cess not appearing in Excise Invoice

    Hi all
    i have a small issue and I am not very familiar with the CIN configuration.
    When I capture the excise invoice, only Basic Excise Duty is appearing in the invoice but Education Cess and Secondary Education Cess which is there in Sales Invoice is not getting captured.
    For example;
    If BED is 1000 Rupees; Edu Cess 20 Rupees and Sec Edu Cess 2 Rupees; only 1000 Rupees is getting captured in the Excise Invoice.
    Kindly let me know am I missing any G/L account settings.
    Thanks and Regards
    Adithya

    Thanks Prasanna/JP
    The mistake was from my side. I had not maintained condition records for these condition types.
         JEXT     IN A/R BED total     100.000      %         
         JECT     IN A/R Ecess TOT     100.000      %         
         JHET     IN A/R S&H eduCesTOT     100.000      %         
    The values are capturing now in excise invoice.
    Thanks and Regards
    Adithya

  • ECess and S&HEcess amount not updated in J1iin

    Hi All,
    I am chandra, we are using TAXINN procedure.Ecess and S & H Cess amount not reflect in Excise invoice J1iin, only Excise duty is reflected. I maintain pricing procedure conditon type for Ecess(JECS)
    nad S&HEcess conditon type(JA1X). Up to billing document it showing Ecess 2% S&HEcess 1% after billing factory sales excise invoice(J1iin) not showing the values. Plz help me.
    Thanks and regards
    Chandra

    Dear Friend,
        Go to tax on goods movement -> India -> Basic settings -> determination of Excise duty and maintain the default conditions for taxes, in Taxinn or in Taxinj which ever procedure you are following - the data will flow to J1iin. Same way check the screen 600 and 400 in sapprogramj1iin in se80. Hope this will help you to solve your problem
    regards,
    Sudhir
    Edited by: Sudhir Nair(India) on Nov 20, 2008 7:58 AM

  • Ship to party and Bill to party not reflecting in marketing documents

    Hi,
        Ship to party and Bill to party not reflecting in marketing documents inspite of defining it in BP Master data.why does it happen.we are on 8.8 version and this is happening in Livedatabase.
    Thanks,
    Mansoor Baig

    Hi Mansoor,
    Is this for new transactions or existing ones that went thru the 8.8 upgrade? Is this for new BP that the address doesn't show or existing (if you have other transactions with no address problem then it shouldn't be the address format setup unless something happened in the upgrade).
    Heather

  • Education Cess not appearing in Excise Invoice.

    Hi All,
    Education Cess in not appearing in the Excise Invoice for trading materials.
    G/L Account for Education Cess is same for Regular Materials & Trading materials.
    For Regular materials Ed.Cess appears in the excise invoice only the traded material Ed Cess not appearing.
    Thanks & Regards,
    Hemant Patil

    Hi ,
    Education CESS not appearing in Excise Invoice. It has to checked with the Pricing procedure. Go to VF02 and analyse the pricing updates analysis. Check the ECEss value is coming there are not.
    Then check the accounting document gets generated or not. in that check whether ECess value is posted to concerned GL Account or not.
    Then go J1IIN and check, whether the ECS value flowing there or not ?
    If not u need to look into the Screens with the help of ABAPer.
    Or search for the OSS notes, if not raise the issue to SAP.
    Best Regards
    SRI

  • Secondary education cess not flowing in excise invoice

    Dear all,
    we are facing one problem that secondary education cess not flowing in excise invoice.It is not flowingONLY when we  are doing
    exports with bond businessprocess.what could be the reason.
    For domestic it flows well and no issues.
    Your timely help is highly Appriciated with suitable reward points assured.
    Thanking you,
    Best regards,
    R.Srinivasan

    Hi,
    Go to IMG u2013 Logistic general u2013 tax on goods movement u2013 india u2013 basic setting u2013 determination of excise duty u2013 maintain excise defaults.
    Over here check whether you have maintain any setting for the secondary education cess over here or not.
    Regards
    Raj.

  • Not Education.Cess not apper in Excise Invoice.

    hi all,.
    i have maintained properly in Tax dafault information in logistics general .but not Education.Cess not apper in Excise Invoice.

    Post this message to SAP-OSS. They will guide you which note number is to be applied to resolve this problem.
    I do not remember the note number, else I would have updated you on the same.
    Regards,
    Rajesh Banka

  • Education.Cess not apper in Excise Invoice.

    hi all,.
    i have maintained properly in Tax dafault information in logistics general .but not Education.Cess not apper in Excise Invoice.

    At the time of GR Ecs Amount isn't Coming.
    Am I right???
    At the Time of PO Ecs is showing or not???
    Maintain the Excise Default Same What u have maintained in the Tax procedure.
    Logistic General>>Tax on Goods Movement>>India>>Basic Setting>>Determination of Excise Duty>>Maintain Excise Defaults  Here u maintain ur Conditions .
    Reagards
    Biswajit

  • Transported to A and Q box - Changes not reflected in only  A Box Q Box Ok?

    Hi Experts,
    I am facing an issue with Transportation in SAP BI.
    In my project we have a requirement  to create a new query After that we have developed that query with new requirement features.
    As per the user requirement, the new developed query must be moved to production and where as the old version could not be displayed any more.
    For that purpose, after developing the query in Dev Box i have collected the tp and  deleted the old version query in DEV Box.
    I have transported the new version developed query to Acceptance Box and then to Quality Box.
    And tested in Acceptace and Quality Box whether new developed query features is reflecting or not .
    Found that, in Quality Box new query featured reflected where as in Acceptance  Box the new query reflections have not reflected.
    Now my question is if i trasport the same tp to production whether changes will get reflect or not
    And also would like to know the route cause why in the acceptace changes have not get reflected.
    I am confirming that, in both acceptace and quality box the tp were trasported succefully with out any of the errors.
    Kindly reply me any of the folks faced this kind of issue or scenario in your projects or expeiriance.
    Thanks,
    SN.

    Hi,
    Just try re-importing your query in OVERWRITE mode from D to A. Also request your basis team while transporting your TR to Prod to transport it in OVERWRITE mode.
    Hope this helps.
    Regards
    Jeeth

  • Secondary Edn Cess not captured in Excise:How to cancel the Doc ?

    We have few material documents  in which secondary education cess value is not captured & posted while doing goods receipt (MIGO) & its value also not reflected in RG23A Part-2, already RM stocks were consumed for production, we are unable to cancel material, excise documents, to do posting for vendor bills.
    Kindly provide us with solution to solve this issue.

    Hi
    Since the stock has been consumed perform J1IH -additional excise only for SEcess.During this  ETT DIEX is called ,the entries thus passed can be visible in J2I9 report.Initially since the excise has been posted without SECess u need to pass SECess amount to the vendor through t code FB60.
    Regards
    Sandeep

  • Sales order no. should be reflected in Excise invoice(J1IIN) in accounting

    I have created one invoice for one line item, customer want sales order no should be reflected in Billing(VF02) and excise J1IIN accounting...
    go to vf02 or J1IIN > accounting >CENVAT clearing>display document: line item 03...here customer want sales order no.
    I have made copy control changes but still problem is there,
    I have done test on both cases 003 and 001 but still i m nt getting proper output.
    Customer want same sales order no. in J1IIN too in sales order and assignment no. field.
    VTFL> 002> B and B this will solve my issue till billing...but same sales order no. I want in excise invoice(J1iin)..
    Kindly suggest...

    Hi Vipin
    I agree what  Eduardo said . Go to FS00 and give the G/L accounts that are being used for Excise Invoice transactions. In
    FS00->Control Data tab->Sort Key.Check what is the Sort key that has been maintained in those G/L accounts. With the help of your FI Consultants ask them to maintain the required details in V_TZUN.table.If you have authorization then go to SM30 and give V_TZUN. table name and select the sort key and maintain fields(VBEL2 - Sales Document & VBELN - Billing Document).
    Regards
    Srinath

  • BED, E Cess and Secondary education cess not showing in MIGO

    Dear Experts,
    i have created one PO with tax code ,
    in the invoice tab all the BED,ED cess and secondary cess are showing properly,
    but when i am doing the MIGO, the same is not showing in item detail excise item tab,
    my tax procedure is TAXINN,
    please advice me where the required settings are missed out,
    lakshmi reddy

    Hi,
    For the above condition for that tax code u have to maintain settoff
    SETOFF Must Be Maintained:-
                                              JMX1 --     IN: A/P BED setoff
                                              JEX1 ---      Ecess Setoff Sta
              JHX1     IN: A/P SECess SOTot
    and also in spro in codition based classification in cin setting
    u must maintain taxinn with the setoff like JMX1 and all other.
    Hope Help U !
    Regards,
    Pardeep Malik

  • Higher Secondary Education Cess not flowing in Excise Invoice

    Dear All,
    When I create my excise invoice the higher secondary education cess is not flowing in my excise invoice.The BED and the Secondary education Cess of 2% is flowing in the excise invoice.Please let me know why this amount is not flowing in the excise invoice.
    Kind Regards
    Atul
    Edited by: Atul Keshav on Sep 15, 2009 8:16 AM

    Hi,
    Go to IMG u2013 Logistic general u2013 tax on goods movement u2013 india u2013 basic setting u2013 determination of excise duty u2013 maintain excise defaults.
    Over here check whether you have maintain any setting for the secondary education cess over here or not.
    Regards
    Raj.

  • Higher Education Cess not appearing in Excise Utilization tab

    Hello Gurus,
    When i create excise invoice, system is calculating the SeCess in the " CREATE EXCISE INVOICE SCREEN". But, the same is not appearing in the excise Utilization tab.  Plz guide to help me solve this issue.
    Thanks in advance!
    Warm Regards
    Prashant.

    hi
    Discuss with your abapper it requires some screen changes in screen painter
    Apply the below note
    Note 1251611 - SECess is not visible in J1IIN
    To correct this issue in transaction J1IIN :
    1. Ensure that you have already applied the corrections suggested in note
    926664.
    2. Run transaction SE80. Enter the program name as 'SAPMJ1IIN' in the
    change mode.
    3. Navigate to the screen 0600 and enter the layout of this screen.
    4. Rename the text fields from 'TAX1' to 'SECess'. Also, do NOT maintain
    these text fields as Invisible in the attributes.
    5. For the I/O field 'TOTALS-TAX1AMT', 'RG23A-TAX1AMT', 'RG23C-TAX1AMT',
    'PLA-TAX1AMT', 'ENT_TOT-TAX1AMT', remove the value 'AT1' from the Group 1
    attribute. Also, do NOT maintain these I/O fields as Invisible in the
    attributes.
    6. Save and activate the screen.
    Take the help of abaper
    Regards

  • BED NOT FLOWING TO EXCISE INVOICE J1IIN

    HI SAP GURUS
    can anybody help me the bed value is not flowing from invoice to excise invoice ecess,hecess,is coming properly we are using taxinn procedure i checked in excise defaults there it is jexp only i also assigned ett to concern gl accounts and i assigned jexp in classify condition types to zinfac to jexp.one thing is we recently changed taxinn to zaxiin.

    IMG->Logistics general->Tax on goodsmovements->India->Basic settings->determination of excise duty->Maintain Excise defaults. Here you maintain your excise condition types.
    Check whether you maintain G/L accounts for your transaction types just under excise acoounts for excise transaction.
    Regards,
    Deepu Pillai

Maybe you are looking for