Echo Audiofire Audio Interface with Boot Camp

Has anybody tried to use an Echo Audiofire audio interface in Windows Vista 32bit on a Macbook Pro using Boot Camp? I'd be very interested in hearing any comments on this combination. I think there might be an issue with either the MBP Texas Instruments firewire drivers for Vista, or with the Audiofire drivers for Vista. I get lots of crackling and popping, no matter what buffer sizes I use on this interface. In OS X, the Audiofire works flawlessly on the same computer, so I'm sure it's a driver issue (since it seems to work fine on other Vista computers).
Does boot camp include Texas Instruments firewire drivers? Or is this included in Vista itself?
I'm also interested in hearing about any experiences with Audiofire in Windows XP on MBP Boot Camp.

I was also suspecting something like this in the beginning, but in fact, microsoft has completely removed the support for IP over 1394 in Vista (see http://www.microsoft.com/whdc/system/bus/1394/IP_1394.mspx).
I wonder if there's anything else hogging the FireWire bus. There are no other devices present though.

Similar Messages

Audio problem with boot camp when I connect my windows 7 macbook pro to HDTV

I have windows 7 32 bits installed on my macbook pro and I setup boot camp 4. When I connect my macbook pro to HDTV using mini display cable, the audio doesn't work. Although I set the default sound device to digital audio? help please!

I've found that jiggling with the audio connection to my Mac Pro when running in Boot camp, I get audio OK. I don't understand why -- because I always get audio when running in Leopard.

ISight is not working with boot camp

Hi,
I have a Macbook Pro and very satisfied with it. Formerly I worked with Windows XP, so I decided to buy a Macbook and use boot camp. Everything was fine. In my enthusiasm I bought the LED cinema display. Very good display but the iSight camera is not reliable working with boot camp. There is no driver available. Sometimes the camera is recognized as video device but mostly not. When the camera is not recognized then there is a yellow exclamation mark in the device manager. I don't know what to do. Is anybody working with boot camp and the iSight build in the LED cinema display? And what driver do you use? Hopefully I get some help here. Everything is working convenient except this issue.
Thank you, Frank

Sorry, I think I mixed some things. I tried several contellations to find out what is going wrong. The iSight is woking with my MacBook (and boot camp). But it is not working with other Laptops or PCs (all with Windows XP). It is working really rarely but not reliable and not replicatable. In all cases I tried only the USB connector from the LED cinema display. Audio, micro and hub is always working without problems. The iSight driver delivered with the Macbook is not working (only with the Macbook itself). If I had known this before I think I would buy the display although. The display is great. But it is a pity that the iSight is not working when you do not use Apple hardware. May be I will buy the Mac Pro in one or two years when I need a new PC. Perhaps someone can answer if Windows XP is working without problems on a Mac Pro? And is the iSight build in the LED cinema display working (Mac Pro and boot camp)?
Frank

Windows 8.1 is compatible with boot camp?

Hi,
Can I install windows 8.1 on a Mac Book Pro Early 2011 with Boot Camp?
Thanks

it's not officially supported so if the windows drivers for the mac hardware works out is a hit or miss
some people don't get audio some don't get network some like me have often fatal bluetooth crashed when login into win8.1

Have Imac with boot camp windows 7. Sound works great in mac but no sound in windows?

I have new IMAC 24 with snow leopard os and installed windows 7 ultimate 32 with boot camp. The sound works great when in MAC but there is no sound when boot up in windows.The mixers show a sound level as music is plaing but no sound out of speakers or earphones. I read on forum that many others have had same situation with Mac Book Pros and had success by downloading new realtec audio drivers, but my system has Cirius 2406 ab9 drivers and I can't find any replacements for them. Does anyone have a fix?

Keep on trying, keep searching as there are quite a few work around's for different issues.
One way is to reinstall the Boot Camp drivers and update them again via the Apple Software Updater in Windows. You did update them the first time, right?
Or extract the sound drivers from the Boot Camp package (or the DVD if you have it) and just install those again. You should find a few how-to's in the search results.
Sorry I can't help more...

Why are my earbuds so loud with Boot Camp?

I recently installed Windows 7 Professional with Boot Camp, and when I plugged in my apple headphones I found the volume to be extremely loud. The highest I could go on the volume setting was to maybe around 10 before it got too loud. I've tried to repair the drivers (I even went so far as to redownload the support software and then repair the drivers), but they still had an extremely high volume cap. It's as though the max volume on OSX is near the minimum of Windows 7, and if I raise the volume higher on Windows 7, it goes well beyond the maximum on OSX. I realize that I can go into the mixer and change the volume settings for applications so that they do not seem as loud, but it's inconvenient to do that every time I open an application for the first time, and it doesn't eliminate the problem at the source of it all. Should I try to remove the drivers altogether and then reinstall them (which should be easy using the Boot Camp support software), or is it as simple as activating or deactivating an audio setting somewhere? I realize this is a minor problem but any help would be greatly appreciated. By the way I have a 2011 Macbook Pro 13" with an i5 processor, if that's any help.
Thanks!

Those are very, very high temperatures and very high fan speeds just trying to cool things down.
Now - which applications or processes are turning up the heat? Open Activity Monitor (Applications>Utilities) and select "All Processes" and sort by CPU %:
Then post your screenshot (http://support.apple.com/kb/PH4391) using the little camera icon in the composition bar at the top of your reply.
Clinton

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Windows XP Pro - 2 GB RAM limit with Boot Camp

Hello,
I have a MacPro running windows XP Professional, have Boot Camp 2.1 installed, and my computer only sees 2 gb of RAM when I have 4gb RAM installed. OSX sees all 4 gb. I am very frustrated because many of the applications I use only run in Windows. As I know this is an outstanding issue upon further research, has anyone found a way to amend this (aside from switching to Vista 64) or know if Apple is planning to fix this issue? I fear that Apple's intentionally done this
which makes it even more infuriating. This is NOT a Windows issue; we have other machines running XP with 4 GB RAM just fine, which leads me to believe that its a problem with Boot Camp or Apple's EFI (Bios).
Thank you in advance for your input !

Hi,
it's a hard- and a software problem as well.
Since 32-bit Windows has a limited range of adress space (4GB) to use for harware (PCI-E) extensions to use, the avaiable memory to use is diminishing the more expansion slots there are.
With the Mac Pros 4 PCI-E slots which reserve their needed adress range whether they are in use or not, this leads to an avaiable memory of 2GB.
Since 64-bit Windows has not the 4GB limitation, therefor the PCI-E adress ranges do not delimited the amount of useable memory.
XP-64bit would also do this trick, but is not supported by Apple.
Regards
Stefan

Performance with Boot Camp/Gaming?

Hi,
I just acquired a MBP/2GHz IntelCD/2GB RAM/100GB/Superdrive, with Applecare. Can anyone comment about the performance with
Boot Camp -- running Windows XP SP2, and what the gaming graphics are like?
Appreciate it, thanks...
J.
Powerbook G4 [15" Titanium - DVI] Mac OS X (10.4.8) 667MHz; 1GB RAM; 80GB

Well, I didn't forget to mention what I did not know yet.... So that's not exactly correct..
As per Apple's support page, http://support.apple.com/specs/macbookpro/MacBook_Pro.html
My new computer does have 256MB of video memory...

Windows 7 professional 64 Bit on MacBook Pro Retina 15 with Boot Camp ?

Hallo guys, i have a big problem with installing Windows 7 professional 64 Bit on my MacBook Pro Retina 15 with Boot Camp. No matter what i try i get a black screen after partitioning or get a message like " No bootable disk" or " No System Disk availabe".
My Mac has : OS X version 10.8.2, 16 GB RAM, 512 GB memory, 2.6 GHz Intel i7 and is only a week old
My Boot Camp is version 5.0.1
My Windows InstallingDVD is one year old now, i needed it to build a PC last year, hope that doesnt make a difference, its a full version, so not just for upgrading.
From what i saw in the apple support it should work on my macbook. I hope someone can help me.
Thanks in advance.

Ok, problem solved. I looked a bit more here in the questions and there was the answer and its quite simple.
Somehow an USB-stick makes problems while Windows wants to install, i dont know why. So i just made everything over DVDs and now everything works fine.

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

VMware Fusion vs. Parallels (with Boot Camp) -- help please!

Hello. I have just reinstalled Mac OS X (Leopard) on my MacBook and am looking to install Windows XP SP2. I will be installing a Boot Camp partition -- I know that much -- but I also want to use Parallels or Fusions so that I have the option of running the Boot Camp partition within OS X. Somehow, over my years as a Mac user, I have acquired both of these applications (Fusion and Parallels), and I was wondering if anyone has any information on the differences between the two. Two questions:
1.) As I just mentioned, I'm just looking for any information on the differences between the two apps -- what features one offers that the the other doesn't -- why I might want to choose one over the other -- and so forth.
2.) Since I have both apps, would it be possible to have both installed at the same time? In other words, could I have both Fusion and Parallels installed on my computer, and then, when it comes time to open Windows, choose which app I want to open and use? (not sure there'd be any point to this, but just in theory, could it be done?)
Thanks in advance -- any info in regard to either question is much appreciated.

Thanks for the replies. Although I've never used Fusion before, I've installed Parallels with Boot Camp partition three or four times before on this computer, and it has always worked great for me, so I know I want to use Boot Camp. And as far as the application goes, sounds like I'll be using Parallels, mainly because it's what I'm used to. That Wikipedia link was exactly what I was looking for -- I had checked Wikipedia before I posted the topic here, but I didn't find that comparison page. Anyways, they look about the same (Parallels and Fusion, that is) for anything I'd be concerned with, but where there were any differences, they seemed to work in favor of Parallels (except for Linux-related features, in which Fusion seemed to have the upper hand, but I don't use Linux). So, again, thanks for taking the time to respond -- much appreciated. Have a good one.

A Potential Convert Looking for Some Help with Boot Camp

I posted this in the Macbook Pro forums, and somebody directed me here. Hopefully you can help me with my questions.
Hello,
I have been a PC user ever since I can remember. I have loved the operating system and have had a Dell Laptop for 4 years now without any problems at all. I have no qualms with the Windows Operating Systems. But, it is time for me to get a new laptop, as I will soon be heading off to college. I was thinking about getting another PC, as they are significantly cheaper than the lower-end MBP that I would get, but I was also thinking about trying out a Mac. I plan on using this laptop for most of my undergraduate education though, so I don't want to buy something and find out it isn't what I want or I can't use it. So, if you would help me, I would like to ask some questions about the lower-end Macbook Pro, and I may just end up getting one.
First things first, I am going to be going into engineering, likely mechanical or systems, at either WPI, Northeastern, or Tufts. Ah the experience of choosing colleged. I know Tufts uses AutoCAD, WPI uses SolidWorks, but I am not sure which Northeastern uses. Either way, I most certainly will be using a CAD program. I know that most CAD programs do not work on Macs, so I will likely be using Boot Camp. I have though seen on these boards that the AutoCAD licensing does not work with Boot Camp, or that some users have faced major problems with it. If this is so, then it is highly likely that I will be unable to get a Mac as that program is going to be an absolute necessity. Even if this is just a small percentage of the population, I do not want to find mine being of major issue. For those of you who have gotten it to work, how difficult was the installation, and have you had any issues with AutoCAD or the like? With this in mind, would you even suggest that I get a MBP?
Another Boot Camp question. I have read many posts on these boards discussing different partitioning options, yet I still am unsure what they all mean. I expect to use the Windows side for more than just AutoCAD. I likely will install some games on it for when I am bored, and Microsoft Office, as I do not wish to spend the extra money buying Office for Mac and I need to have the versatility of Excel that I have heard is not found in the Mac version. What is the difference between these two partitioning types, which would you recommend, and how much storage should I partition if I get a 200GB hard drive?
Yet another Boot Camp question, sorry for so many of these. My friend who has a Mac lauds it for its security, nobody makes viruses for Macs. As I will most definitively be using Windows in Boot Camp, would this compromise this security? I know it will be Windows, but I still imagine that it would be encoded somewhat differently then normal, but I could be wrong. Also, if it is possible for the Windows portion to get a virus, could that affect the Mac portion?
Also, I don't use an iPod. I suppose I always thought they were overpriced for what they do. Instead I use an Iriver Clix 2, and I love it. The only thing is, I use Windows Media Player to sync it with my library. I know many have qualms with WMP, but I personally favor it more than iTunes, but that is just me. I do not believe that you can download it for a Mac. If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Finally, is the battery life any different when using Windows than when using Leopard? I will likely be using the Windows portion in the class room.
Sorry for the long-winded post, but I am certainly hoping that I can get some solid answers to make an educated decision before getting my next laptop. I would like to thank you very much for any help that you are able to give me. I do hope you can help me quickly. Thank you.
Message was edited by: Pyrojoe

I can't answer all your questions, especially not anything having to do with CAD.
I still imagine that [Windows] would be encoded somewhat differently then normal,
No. Windows is Windows. You will need a good Windows antivirus, firewall and antispyware program. It is unlikely that a Windows virus will infect the Mac partition because, ordinarily, Windows doesn't know how to do anything with the HFS+ formatted Mac partition. However, the existence of products like MacDrive means that it is possible to teach Windows how to write to the Mac partition, so I see no reason why a virus could not be programmed to.
If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Yes. Probably/yes.
Finally, is the battery life any different when using Windows than when using Leopard?
Yes. Windows does not have the battery management that Leopard has. The battery runs down much quicker in Windows.
You didn't ask, but depending on what kind of engineering you want to study, you may be interested in, or even need to, use some flavour of Unix/Linux. On the one hand, you could always create a partition on a PC--or wipe Windows--and install Linux on the PC. That could even be a good learning experience. On the other hand, Mac OS is Unix, but preinstalled. So with a Mac, you would already have a platform for writing shell scripts, you would have Perl and Python built-in, you would have an IDE (XCode Tools) for C/C++/Objective C/Java as well as gcc and make tools already on the disks which come with the computer, and so on.
Message was edited by: Mr.Lobotomy

Echo Audiofire Audio Interface with Boot Camp

Similar Messages

Maybe you are looking for