Echo from WordPress post not reflecting post changes

I am developing a php site on my localhost and had been successful in establishing a Dreamweaver Binding to echo content from the site's attached blog posts to respective divs on the site's php pages. All was well until today. For some reason edit changes made to the blog post content are not be reflected to the echo content on the php pages. The echo displays pre-edit content minus the changes. This had been working for several days but suddenly stopped functioning. Does anyone have any ideas as to why.
Thanks in Advance.

You know, sometimes it only takes a night's sleep. I woke up this morning and discovered that I had not changed my database connection file back to my localhost from my remote connection. I am going to try to avoid posting questions late in the evening.

Similar Messages

WEBDAV rules repository not reflecting the changes

WEBDAV rules repository does not reflect the changes unless i restart the application server. i dont have a problem with file repository because i can change the file repository using the link from the BPEL console and the changes are reflected immediately from the very next instance. .
But in case of WEBDAV repository, even if i change the rules , they dont get reflected in any of the further instances unless i restart the server.
Please help on this one.

Another observation is that the entire bpel process(with decisionservice on webdav repository) works even if the webdav server is shut down.
The webdav server needs to be up only for the first instance of the bpel process. After that, even shutting down the webdav server does not effect any further instances and they all run smoothly.
This shows that the decison service builds up some kind of cache on the first call of the decisionservice. Some way to destroy this cache everytime the webdav repository changes will solve the problem.
Any help on this topic is highly appreciated.

Changes made from application are not reflecting in Database and vice versa

I am updating changes from my Application. However the data in not reflected in the DB. I logged in and can see no change. However, the changes are being reflected in the Application, even after a server restart. Any ideas on this ?? its wierd !!

SELECT   c.sql_text sqltext
    FROM v$session a, v$sqltext c
   WHERE a.SID = :session_id AND a.sql_address = c.address(+)
ORDER BY a.status, a.last_call_et, A.SID, A.username, C.pieceSQL_ADDRESS
SQL_HASH_VALUE
SQL_ID
SQL_CHILD_NUMBER
Check this to see the last executed sql in your database , make sure you connect to right database with right schema
Last executed sql

Message sent from RWB but not reflected in SXMB_MONI

Hello Experts,
I have a SOAP - RFC synchronous scenario. I am sending a message from RWB to PI system.It shows message sent in RWB and the message details are reflected in the RWB->message monitoring ->Adapter Engine as 'Successfull'. But no in RWB->message monitoring->Integration Engine.
The message does not reflect in SXMB_MONI either. All other scenarios are working fine except this.
Also on checking the status of Sender communication channels in RWB it shows 'yellow' with reason channel may be inactive or unitialised. Whereas i have checked the communiaction channels in ID, their status is Active.
Kindly advice a solution.
Thanks in advance,
Elizabeth.

Hi,
Your message processed from sender adapter. But seems there is some problem in reaching IE. Check out your wsdl file. check when define a web service, have u given right url. Is it like this
http://[server]:[port]/XISOAPAdapter/MessageServlet?channel=:[sender communication channel service]:[sender communication channel name]
and also make sure whether you given the right http port name, sender business system name , sender message interface in the following step of define web service. and the port name is important you can fine http port for your PI server by going to SMICM tcode. in that press shift + F1
You altova xmlspy software for testing purpose. You can download free 30 day trial version from altova website. once you installed in it.
Go to xmlspy software. the menu you can find a "SOAP". underthis menu you can find create soap request. select that it will ask the wsdl file. give the wsdl file which you are created in define web service step. after that in xmlspy
menu->soap->send request to server. then it ill ask user name and password to connect with the PI server. then you will get the rfc response if u successfully connected with PI sever.
for more details,
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID1437447550DB12110496670821140257End?blog=/pub/wlg/4550
but in this website they didnt use xmlspy some other third party software. good luck
Regards,
Balaji

Changes not reflected in Change to Document (tcode CRMD_ORDER)

Hello Expert,
I made a change in field 'Planned Completion Date', in my transaction through tcode CRMD_ORDER.
When I view Change to Document (CRMD_ORDER > top menu > Extras > Change Documents), the change is not reflected.
All changes are usually captured in the Change to Document.
Perhaps it is captured somewhere else?
Please assist.
Thank you.
HJMY

Hi HJMY,
Check if the Change document object provided for CRM_ORDER has the field in the SAP provided structure. This can be verified in transaction SCDO -> select change document object CRM_ORDER and display, you will see list of structures on the left hand side, if the field you are refering to is a part of one of these structures then the changes in this field are displayed when you go to (CRMD_ORDER > top menu > Extras > Change Documents). If it is not present then you will have to create a new change document object and assign a proper structure, you can generate update program to update that change documents. Hope this helps.
Thanks,
Priyanka

IDOC posted successfully from XI but not reflecting in Receiver R/3 system

Hi All,
My scenario is File-XI-IDOC.
I am getting successfull message for outbound IDOC in XI.
But when I search in receiver R/3 system I am not getting any inbound IDOC in R/3.
I have checked all the parameters in SM59,ports and partner profile,but still not working.
Please help.

hi Bhavesh,
This authorization problem is related to XI user or the one I mentioned in RFC destination?
Whose autorizationa I should change XI user or R/3 user?(I am bit confused.)
Because if problem was in RFC destination user I should not get my metadat also,I am getting message as "No authorization to send IDocs with message type MATMAS" is it related to XI user id or R/3 user id.
Thanks,need ur help.

Changes in outline made from EAS are not reflected in EPMA dimension lib

I added member formulas to some members in the account dimension using Essbase Administration Services and save them, when i opened workspace, I didn't see the change reflected in my planning application though i refreshed database from workspace. Any ideas?

Hi,
Any changes made in EAS will not be reflected in Planning. And also if you refresh it from workspace/Planning, the changes made in EAS are lost.
If you want to apply any formula to a member in a Planning application you need to do it in Planning and then refresh it.

REM MFBF Scrap posting not reflecting in MD04

Hi All,
If I am doing yield posting from MFBF i can see reduced quantity in MD04.
If I am doing scrap posting from MFBF quantity is not getting reduced from MD04.
how can i achieve it via ABAP coding. pleae help with any exit or sample code.
Thanks,
Chinna

Hello Chinna,
Please refer below thread for your issue
Scrap rate is set in bom but can't be consumed in REM
I hope this information helpful to you
Regards
Umesh Mali
Message was edited by: Caetano Almeida

Workbook in 3.5 version is not reflecting with changes made to structure

Hi Guys,
I have changed a structure in a query by removing reference in Query Designer 7.0 by adding couple of fields and Query is displaying newly added fields in 3.5 Bex Analyzer.
This query is used in a 3.5 vers workbook, but this workbook is not showing the newly added fields from the structure. While refreshing the Query in the workbook getting warning as structure has been changed and it does not exist.
Can anyone pls suggest some solution so that newly added fields gets visible in the workbook.

Hi,
In workbook design mode, try to attach same query again & then Save & execute, because from error it seems that workbook is able to sense changes in structure but unable to reflect those in workbook.
This this would resolve you problem.
Thanks & Regards,
Pradip Nikam

SCCM 2012 client not reflecting name change

I have a computer that is running the SCCM client that was recently renamed because it was moving locations (the computer names reflect department and building). So I renamed the machine but it's still reflecting the old computer name in manager
console(it's been about 5 hours since the name change), do I need to remove the client and reinstall it to get it to update properly or should it be doing this automatically?

http://myitforum.com/cs2/blogs/rzander/archive/2008/08/11/sms-sccm-commandline.aspx
Use Trigger DataDiscoverRecord (DDR) update in the above post.
Jason | http://blog.configmgrftw.com

Printing from word and not able to change print on 1 side option

everything i print is "printing on both sides" and I cant find the option to print "one side".
please help

Hello vicy,
Welcome to the HP Support Forums!
Sorry to hear about your printers Web Services information resetting on you. I would not be able to answer for certain, but it is possible the update turned off Web Services and there is no changing that. Regarding applying your old Email address for the printer, you can not.
It is forever locked to the account prior to the Web Services being turned off. You will need to setup the Email information on all devices that use it again. Hopefully, you can get close and just add a "1" at the end for example.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

EAR file not reflecting the changes after successful deployment

Hi Everyone,
We have a weird situation where we deployed a EAR file in NWDS and changes got reflected in Dev portal and when pushed to QA the changes are not getting reflected.
There must be some archieving issue or unable to overwrite the existing EAR file...
Please help us out this is happening only for one ear file rest are getting deployed properly.. we are using sd

Hi,
There are possibilities that your ear is depending on other referenced application/class. I encounterred like this kind of error. In my situation the dependent/referred project/classes were not deployed correctly.(Correct version is not deployed).
My suggesstion would be in that area,so check if all the used components latest version is deployed.

Posting not possible (Posting yr.earlier than capitalization yr.)

Hi gurus
while posting write up through ABZU ; I am getting an error message that posting year is earlier than Capitalization year Message No: AA328.
When i checked the group asset first acqusition on date was in future.
I donot know how it was happen.
Please give suggestion to solve this issue .
Thanks & Regards
Binoj M D

hi
Got the solution. Screen layout changed.
for that group asset and now it is working fine.

Movement of Position from Oganization Unit not reflecting in IT0001

Hi,
We moved some positions from one Organization unit to other using Staff assignment change trasaction PPOS_OLD. Although the relationships for these positions are updated with correct date delimitors when checked in transaction PO13, PO10 etc, we still see the old orgnization unit in Infotype IT0001 for the personnel number, when I check the org structure from within info type IT0001, it shows both the Org units assigned to that position, please suggest what the problem might be and how we can correct it.
Thanks in advance.
Best Regards,
Imran

I've seen this before when the person updating org data via PPOS_OLD does not have authorization to maintain employee data, specifically for Infotype 0001. I would test this (in DV or QA system and run /nsu53 after the move via PPOS_OLD).
My guess is that the begin date on the IT0001 record is different than the move date. Try creating a new infotype 0001 record with the begin date equal to the position move date (you'll want to put it on the main PA30 screen so when you click create, it will show correctly).
You can run RHINTECHECK to identify records that are out of sync between PA/PD.
Thanks,
Danialle

Template not reflecting the change.

Hi All,
I am working on Adobe output Designer5.5 version. I am now trying to modify an existing template. The changes done to the template design are not getting reflected in the printed output. Also additional lines which are not visible on the template design are printed on the output.
Can someone please suggest on the a solution for this.
Thanks and Regards,
Benila Sophy.

Sometimes if you have objects (fields or lines for example) that get into the "unprintable" area of the form you can get really wierd results depending on the printer. If you are using subforms, be sure that -aapoff is set. If you like, send me your ifd and a sample data file and I would be happy to have a look at it.
[email protected]

Echo from WordPress post not reflecting post changes

Similar Messages

Maybe you are looking for