Echo on playback of audio track using CS5

I am using premiere pro CS5 for editing Mini DV footage captured via a JVC BR-DV3000 VCR and all works as I expected.
I have recently been trying to capture analogue material using a Panasonic VHS player connected via conventional audio/video (red and white plugs and Y/C S 5 pin) to the above MiniDV VCR and then connected to my PC via Firewire.
All looked to be working as expected until I tried to play back the footage from the Premiere timeline. Pictures were fine but the audio was full of loud echo's. I have listened to the sound both through my mixer and audio speaker set up and also directly through headphones plugged into the computer and both display the same echo features.
My PC is Windows 7 (64bit), loads of memory and processing power and a NVidia GeForce GTX 245 Everything else seem to work OK.
Has anybody any ideas on what is cuaing this and how I hcan overcome the problen please.

Thanks Jim for the suggestion. Unforunately this is not the problem as I have already played back this tape on a number of VCR's and it always plays OK. I have also edited this tape before, using Premiere Pro 1.5.1 which was of course an analogue system and Premiere Pro 1.5.1 coped with it OK. I no longer have Premiere Pro 1.5.1 and have no longer got the edited version which is why I want to re-edit and burn to DVD. Thanks for the response, it could well have been the problem. Any other suggestions or things to check would be greatly appreciated.

Similar Messages

Why do my EMPTY audio tracks playback ANOTHER audio track?

Why do my EMPTY audio tracks playback ANOTHER audio track?
Example: A vocal track (audio 2) being played through an empty guitar track (audio 1).
The vocal track is magically being played through the guitar track with distortion. WHAT possible feature is this good for and how do I get rid of this annoying problem? I looked at the reassign tracks menu and it doesn't say its connected or anything... I don't know if this has been addressed before on this site but I can't find the answer any where on Apple Discussion's website. Please help.
Thanks

A key concept to understand is that Logic is more flexible when it comes to "tracks" than most other DAWs.
For instance, most DAW use a fixed "one arrange track is one audio channel" approach.
Logic doesn't. You can have many arrange tracks all assigned to the same audio mixer channel (although only one will sound at a time).
You probably have two arrange tracks assigned to the same audio object (key command "New arrange track with same object") rather than creating a new arrange track together with a new independent audio channel (key command "New arrange track with next object").
Try this. Hit the + button at the top of the track list, and create a new audio track. This creates a new arrange track and assigns it to the next available audio object.
Move your second region to this new track - does that work as you expect now?

How to add keyframes to audio track using mouse?

I saw in a tutorial that you can click on an audio track and add keyframes (small dots) and then use them to adjust sections of the audio track. When I click nothing happens. Is there a modifire key I need to use in combination?
Thanks

The Option key.

Removing Florescent Light Noise "Hum" from Audio Tracks using FCEHD

I have some clips taken under florescent lighting where the hum was discernable even during the sound check. (I was using external Electro Voice hypercardiod XLR mikes plugged into my Sony DCRVX2100, powered through a surge protector, monitoring the audio with Bose QC2 headphones). Using the same camera, cables, and mikes under incandescent lighting that day was fine - no hum.
Attempting to filter out the hum using the FCE Hum filter wasn't dramatically effective, even with repeated tests establishing that using a frequency of 60 hz, a Q of 40, a gain of -48, and the 1st and 3rd harmonics provided the most benefit.
Additionally I tried again with the FCE 31 band EQ filter, anticipating that the 50 hz and 60 hz filters would provide very specific improvements. Also tried were the LowPass Filter and the 3 band EQ.
I'd like to clean up the otherwise fine audio - any suggestions? I am considering buying a filtered power conditioner as I know that some of the problem can be "dirty" electricity resulting from the ballast of the florescent lighting.
Also, I noted that the numeric values shown for the gain using the FCE 31 band EQ filter oftentimes lagged behind the setting of the slider: returning the slider to the middle "0" position frequently didn't change the previous value of the gain shown. Is this another indication that I should just upgrade from my PowerBook G4 with 2 Gig of RAM?
Thanks!
James Mackay

Hello Jim,
And welcome to the Final Cut Express forum.
You are correct that the ballast generates the hum. Power conditioning is probably not going to reduce or eliminate it, because the old ballasts are magnetic. The only way I found to eliminate fluorescent noise at the source is to replace the ballast with an electronic one or replace the entire fixture with a T8 unit (they use electronic ballasts).
Removing that hum probably can't be done in FCE. Sound Soap can probably do it however, with it's ability to +learn noise+ and then remove that specific audio. The regular Sound Soap works as a plugin for Final Cut, which enables you to apply it within FCE.
At present there is also an 'SE' version available at 50% off however it only works in standalone mode, which means you would have to export the audio track from FCE, clean it and then re-import back into FCE.

How do I play CD audio tracks using LabVIEW?

I need to be able to play and stop tracks from CD's. Is it possible. I know it's easy to play wav's but I need to play the source.

Hi,
I've made an example for you based on MCI command
mciSendStringA from winmm.dll
This example plays the specified track from CD.
The idea is in sequential sending of the next strings to driver:
"open cdaudio wait"
"set cdaudio time format tmsf wait"
"play cdaudio from T1 to T2"
"stop cdaudio wait"
"close cdaudio wait"
The example is attached and works fine on my PC.
Good luck.
Oleg Chutko.
Attachments:
PlayCD.vi ‏48 KB

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

Is it possible to set up a split audio track....

...while recording and create 2 channels with their own effects settings. I have a Tascam US-122MKII audio interface. If one guitar is plugged into LEFT channel and one into RIGHT channel, can they be split up while recording? I don't quite know if the TASCAM allows for this I'm not seeing anything in the manual and don't see wether LOGIC is capable of doing that? The idea is to record 2 guitars at once but split up the stereo into seperat tracks and then add effects so that each player has a different sound. The TASCAM allows 2 intruments ie: voice/guitar,or right and left XLR input but so far everything is imported to 1 stereo track...Any ideas on wether it's possible? Thanks everyone.

Hi
What I'm saying is:
Make a new MONO audio track (use the + button). Assign it to input 1
Make a second new MONO track, assign it to input 2
Name both tracks, record-enable both tracks, and record.
You could, of course, make both tracks in one go via the new track dialog box, and hav ethem automatically assigned to ascending inputs.
CCT

[Help !]Exporting more than 2 audio tracks impossible ?

Hi all,
I am trying to export a sequence with 6 audio tracks using *Menu->File->Export->Using Quicktime conversion...* and it seems to be impossible to export to more than 2 audio tracks !
If I use the option Export->Quicktime movie I can export my 6 audio tracks but I don't want to export to .mov file...
Can anyone confirm or has a solution ?
Thanks in advance.
Tom Douce

Nope, Red is correct on this Tom, unless I'm misunderstanding your question. Regardless of your audio hardware, to export more than 2 channels of audio you must define those extra channels by creating additional "audio outputs" for your sequence ... basically the number of audio channels in your export is equal to the number of audio outputs in your sequence settings; additionally you must map the audio tracks in your sequence to those audio outputs ... you do that by right clicking on or around the audio track lock icon / auto select icon for each channel and using the context menu to assign the track to a given output (you can also do this in the Audio Mixer toolbench window). This is the workflow regardless of whether you are exporting to a file or exporting to tape or otherwise.
For what its worth tho, in my own quick hardly conclusive tests earlier on, exporting a correctly configured multichannel sequence "Using Quicktime Conversion" always resulted in a stereo downmix being passed to the chosen export component, so I still think you're likely to end up needing to use the private export component API to get around this.
Hope I'm wrong tho, as it would surely make life a lot easier for you
Best
Andy

Multiple Audio Tracks in a slideshow

I would like to add multiple parallel audio tracks (e.g. language tracks) to my slideshow. Is this possible or do I need to resort to Premiere create first a slideshow and then add the tracks in encore.
Thanks

The slideshow editor will only allow a single audio track. if you want multiple audio tracks, use a timeline.

Sync multiple video clips with one audio track

I'm an FCPX noob, trying to sync some clips. I recorded a 1.5 hour concert with a DSLR along with an audio track using a separate digital recorder. I have seven video clips, all in sequence (stopping and restarting the camera because of clip length limitations) and one long audio track in WAV format. The audio track is longer than the combined video clips, and there are some short dead spaces in between the video clips when I turned off/on. Now I'm trying to sync them but when I do, the video clips get stacked together with lots of overlap.
I made a test with 3 minute video and audio clips and had no problem. But when I try to do the whole event, I get a jumbled mess.
I could cut the audio into pieces and sync each piece with its corresponding video, but that seems to defeat the sync process, as well as being a lot of work. And, wouldn't I end up with lots of overlap anyway, since my audio clips would have to be longer than my video clips?
Am I missing an easier way to do this, or a way to arrange things better? I can't imagine the problems with several cameras and several audio tracks; my project is actually pretty simple, since it is very linear.
Any suggestions? Thanks--

BobFromIN wrote:
Sorry to take so long getting back to you. Thank you for this advice, but I'm not sure I'm doing it correctly. Is there a way to set the angle on all of the clips at the same time?
Yes. Select all the clips you want in the browser, and then in the inspector fill in the camera angle with the value you want. This can be just about anything, it does not have to be a number. I prefer to name it something meaningful, like "wide" or something.

Audio Mixer won't write to audio track

Pleaes look at this screen capture, regarding a problem I am having with Premiere's audio mixer.
http://www.youtube.com/watch?v=U2SU4L751Ro&feature=youtu.be
I am trying to write to an audio track, using the Audio mixer. I set the audio track to Show Track Keyframes.
While playing I move the audio slider up and down -- but whenI'm finished nothing has happened. No automation has taken place.
It is working with other sequences. Is there a sequence setting that perhaps has turned write for audio to "Off" for this sequence?
Thakns for any clarification.
Rowby

Hi again, just reloaded the project , sure enough the in/out were up the T/L a bit, once I made them cover the entire sequence it now works as expected...
I spent 20 mins with a adobe help trying to prove I was entitled to it and still got nowhere, thank god for user groups.
Much appreciated.
Jeff J

Video and Audio Track Selection

Is there any quick way to do this? Nothing in the keyboard shortcuts menu that seems close to "Sleect Video Track 1", "Select Audio Track 1", etc. Is it only achieveable with a mouse? Thanks all.

I have made custom keyboard shortcuts for video and audio tracks using Toggle Track.
I use numbers 1 to 7 for Video and Shift 1-7 for Audio.
In conjunction with Mouse clicking and shift mouse clicking on tracks..does all that I need.

Set default audio track for playback in Source monitor

So I'm an editor that is somewhat new to the profession and I am working on a project right now with close to 100 video clips in my project. Most of the clips have their audio recorded to track 2 but when I load the clips into the source window to find the footage asked for in my script there is no audio playback.
They play fine in the program monitor once placed in a timeline, because I have all the audio tracks are turned on until I do my mastering at the end of the project. To get audio playback in the source monitor I have to change the view option to audio waveform which shows a blank screen because there is no audio on track. I then go to the drop-down menu just below the video display and select track 2 at which point the audio waveform shows up and plays back fine. This isn't too arduous a process and isn't a great burden but it slows my workflow down considerably as I have to repeat the process for each new clip I load into the source monitor.
My question then is if there is anywhere in Premiere that I can set which audio track is the default audio playback track for clips loaded in the source monitor. I work on a lot of similar projects like this for the same client and they don't have the most rigorous standards for their shooters. This problem has come up before and will most assuredly arise again in the future so any tips/advice on how to fix this on my end would be much appreciated.
Thanks!

I'm not really sure.I don't do any shooting for the client and in fact don't have any contact with the shooters, we just do the post. They use a number of different freelance videographers all of whom have different equipment and procedures when it comes to formatting, orginization, etc.

I Recorded 4 audio tracks, could hear it in the headphones while recording. Meters show input. No playback sound. Advise.

I Recorded 4 audio tracks, could hear it in the headphones while recording. Meters show input. No playback sound. Please Advise.

How can anyone advise on such a cryptic post, all we can do is guess.
Which version of Logic, what audio hardware are you using?
Have you read the manual?

Bugged audio playback? When I start working with more than 1 audio track.

Hi!
I have been using premiere elements 12 for editing FullHD videos.
Brand new for me just bought it like 2 weeks ago.
Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
This problem is headache and turns my simple editing into almost impossibilites.
I have had this problem with all my projects. _ALL_
Usually the problem seems to appear when I want to start working with several audio tracks.
At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
The audio starts to disapear randomly from all the audio tracks.
It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
I have tried to look help on forums and search all what I could find, but havent been able to solve this.
Small fix has slightly helped:
I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
I simply cannot understand why the playback disapears, I fear it is a bug.
I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
To solve the matter I have changed my audio setting in PE12.
Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
I have deleted my C:\ appdata\roaming\adobe premiere elements & premiere elements 12 folder preferences.. not helping..
I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
Please anyone? I am feeling hopeless here.
Info on my computer:
Operating system: Win7
Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
memory (RAM): 4GB
system: 64bit
<moved from downloading, installing, setting up forum by mod- kglad>
Message was edited by: kglad

First of all, thank you for replying my message!
I will go and try to answer best I can.
Source media properties:
Progressive frame rate, I record this from a game.
Recording program: dxtory
codec: Lagarith Lossless codec
Format: avi
Frame width: 1920
Frame height: 1080
Data rate: 1990656kbps
total bit rate 1992192kbps
Frame rate 30/frames/seccond
Audio of video properties:
Codec: PCM
Format: 16bit, stereo
Bit rate: 1536kbps
Channels: 2(stereo)
Audio sample rate 48 kHz
In addition to that I use wav files for music and narrate
Music files sizes 20-50mb
bit rate: ~1411kbps
In total sizes of audio involved is usually something like 300mb
What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
I opened new project and this is what i got:
Editing mode: HD 1080i
Timebase: 25,00 frames/second
Frame size: 1920 x1080
Audio is 48000 Hz
(I dont know how to change these, btw. Program don't seem to let me change editing mode.
I also looked up my most recent project and found these settings:
Editing Mode: DSLR
Timebase: 30,00 frames/second
Frame size: 1920 x1080
..and same audio settings
Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
I don't have any other audio problems with any other programs.
I am more than happy to provide more information if needed. I hope this information helps.
In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
I have also looked up my firewall settings, anything involved adobe and premiere..
In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
I hope this helps, I would really like to solve this problem.
Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody!

Echo on playback of audio track using CS5

Similar Messages

Maybe you are looking for