ECL Viewer 6.0 - PDF View & Print Resolutions

Hi,
We installed SAPGUI 710 & ECL Viewer 6.0 Patch 4 for all our users.
Settings were made to display PDF through ECL Viewer in DC30.
We observed the following issues while working on PDF
Display quality are not good due to poor resoultion.
Even when we print from ECL Viewer, the quailty is very bad due to the poor resolution.
I have changed the settings to High Definition/Low speed for both Print quality & Preview.
There is some improvement. But, it is not as it is suppose to be.
Are there any other settings to improve the resolution to display & print from ECL Viewer.
Best Regards,
Madhu

We have installed the latest patches for the ECL Viewer and are still experiencing issues with resolution.
When I open a drawing and click on properties, I can see the 2D Loader Preferences for PDF's but cannot change them.
Currently the 2D Viewing Preferences are:
View As: TIFF Group4, Monochrome
Density: 300
The preferences are grayed out and cannot be changed/saved. I currently have PDF's configured to use %EAIweb.webviewer2D.1 %SAP-Control%. I have researched KPRO and SPRO trying to find the config to change the Density from 300 to 1200 to see if this resolves the issue of the drawings opening and printing in low resolution but am unable to find this config.
I may also note I have not set up the MIME types. I have read that this should be done but again I lack understanding how this would be impacting my issue of resolution using the viewer. If I configure SAP to open %auto% the PDF's open with the workstation application Adobe and are clear. BUT this does not support our requirement to complete mark up's within SAP.
Any assistance on this would be appreciated.
Thank You!
Ame B.

Similar Messages

View an Interactive PDF, but print from a print PDF version....possible?

We are in the process of creating interactive PDF catalogs (basic stuff, product sheets, charts, etc...) for our clients. The catalog has a tab navigation on the outside edges (to the different sections) as well as a button navigation system across the bottom (zoom, home, next page, print, etc...). On the screen, it looks great, but to print it, well, isn't as great.
So, my question is... is it possible to have the INTERACTIVE PDF print function access a PRINT version of the same PDF, so that the client's customers can get a clean version that can be inserted into a binder, without all the navigation and tabs? The information needed is technical and accessed fairly often by the customers, usually without the benefit of having a computer or pad around to access the PDF.
I had seen this question earlier on the forums, but, I couldn't find it again, nor was the question answered.
I appreciate the help.
Thanks
Chuck

Yes you will have to export layers from InDesign. but there's an important caveat - the 'print' layer options checkbox in InDesign does not translate into OCG printability in the PDF - it is used to set visibility in the exported PDF, but every layer in the PDF will use the default 'print when visible' setting. You'll have to reconfigure them in Acrobat after export.
davis2121 wrote:
Will I need to export the document to Acrobat in layers to make this work?

How to display a table view and a pdf view on one page?

Hi,
I want to build a portal page, at the top of the page , there will be a table view,
containing a list of employee, below that is a pdf file showing the profile of the selected employee.
i have finished the two parts separately, but since the pdf display require to set the response type of the page, so i think it's not possible in integrate the two parts into one page.
so do i need to use iframe? or is there any other design to solve my problem?
thanks and best regards.
jun

You can create main page & call other two pages which u already created using
<b><frameset></b>
<frameset row = "30%, 70">
<frame src ="tableview.htm" />
<frame src ="pdf.htm" />
</frameset>
Raja T

How to improve pdf export/print resolution?

I'm getting very poor pdf resolution even at "best" setting in an export from Pages '09; it looks to be exactly the same low quality as you get with Print>pdf. Has anyone else had this problem, or even better, found a solution? I did reduce the file size of images in the Pages file and am wondering if maybe Pages has reduced the resolution of the whole document. It looks like it is about 72dpi which is, of course, awful! Help, please!

Thanks, I ran that search and 120 or so posts later I'm still not sure. (I know, the answer is in #121...) No matter, I do have a way to retain resolution from large Pages files : Pages>Export as Best PDF>Open PDF in Preview>Save As Photoshop>Open in Photoshop>Save As PDF seems to keep resolution but shrink filesize by about 90% for me, so that's good. I think my mistake here was assuming that shrinking the Pages doc would only reduce image resolution, but I think it has reduced the resolution of the whole file including text, as you've said, which is the problem I'm having. Well, you live and learn. Back to the drawing board, unless someone else has a suggestion!

Unable to see Hyperion FR reports in PDF view.

Hi All,
We are using Hyperion 11.1.1.3 version .User can able to open the report in HTML view but not in PDF View.When users try to open the report in PDF view ,found that PDF view grayed out(disabled).we tried to change the file preference-->preview-->PDF preview,but still getting the same errror.pdf reader is installed in client machine and ghostscripts has installed in server machine.if its related to access issue ,I think there is no separate security access role for HTML View and PDF view.
Any suggestions would be greatly appreciated.
Thanks in Advance

We are facing the similar issue on only one user's machine. We have exactly same kind of machine with same verison of OS and PDF softwares installed, All other users are able to view is correctly. The effect user is able to open and view all pdf document from his machine or from Internet.
This seems to be more Individual Machine specific issue for us.
Any idea who we can go ahead in investigating or solution to fix this.

How do I stop pdf viewer from printing 4 pages per page?

When I print a file off pdf viewer in firefox, my printout comes out 4 pages per page, even though I check advanced settings and verify that it is set to 1 page per page. I do not know where else I can look to correct this problem.

HI nmrdata,
It may be that Firefox printer settings need to be reset. Please see [[Fix printing problems in Firefox]].
If you have any questions on how to open the about:config page please do the following steps :
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''' to continue to the about:config page.
# Look for print.printer_print and reset the option.

How do i print the current view on a pdf file

How do i print a current view on a pdf file i am looking at, i dont want to print the current page i want to zoom in and print that zoom.

Dansyacht wrote:
Shift-Option 4 with allow you to capture a portion of the screen (the area you want to print) with the mouse.
Shift-Cmd 4 lets you select a portion of the screen
Shift-Cmd 3 takes the entire screen (no selection necessary)
There is a "hidden" setting accessible from the command line ("defaults" command) to change the default screenshot format from png to pdf. Since I always forget the command, I use the free TinkerTool to access/change that setting and others. Screenshot format is found in TinkerTool under "General".

I am running Quickbooks Online and need a pdf viewer plug in for Firefox 5 in order to print checks. Is it available and if so where?

After writing a check in QBOL it shows it in a pdf viewer within my browser. After upgrading to FIREFOX 5 I can not print checks correctly as the earlier pdf viewer plug in is nit compatible with Firefox 5

Try the version posted here:
Blaq Blog - Firefox 4 Mac PDF Solution:
* http://www.blaqapp.com/blog/110329-Firefox-4-Mac-PDF-Solution
You need this extension to overcome the compatibility problem.
*Add-on Compatibility Reporter: https://addons.mozilla.org/firefox/addon/add-on-compatibility-reporter/

PDF Viewer / Printer

Hi all,
I'm looking for a PDF Viewer to embed within a Swing application that would hopefully give a printing option as well. I've been looking at Adobe's now unsupported Viewer, as well as a product call PDFGo. Does anyone have any recommendations on these? Are there suggestions for other alternatives? Thanks,
Max

Why don't you let the default browser of the user do the work for you?`
Start the browser with the URL of your pdf-file. The browser will do the rest.
Check out http://browserlauncher.sourceforge.net/ if you are looking for a way to start the default browser from within your application.
Timo

Firefox 29 no longer prints properly from the built in PDF viewer

I print several EBAY labels a day. Just upgraded to firefox 29 (not realizing really what had changed - now regretting) and the built in PDF viewer no longer prints properly. It shows the label fine on the screen, but when sending to the printer (I tried two different ones) it just prints out two blanks pages. I tried a number of different printer settings and as i mentioned two different printers. Can't get anything to print now except two blank pages. If I switch the application settings in firefox to use an external 3rd party PDF viewer (e.g. Adobe reader 11, PDF Viewer plus, etc) those work fine. However, the default built in PDF viewer clearly broke in this new version. A very disappointing launch for me as this is critical feature for my use. Yes, I have a work around, but the point (and new bug) is still valid.

Go to Tools
Options
Applications
(Content Type) )Scroll down to Portable Document Format (PDF) (change Action to use Adobe Reader as Default or whatever PDF program you prefer.

Format on HTML report different than on PDF view

I have a Quote report based on Product Revenue that we send to our customers. I have it formatted nicely when initially displayed and also when viewed with the Printer Friendly HTML option. But... when I view it as a PDF, it is not even close.
The layout of the report uses a narrative section with HTML formatting to get the elements to align correctly, per the documentation. The HTML I use is as follows:
Narrative Section formatting code:
<table width="600">
<tr><td colspan=3> <div align="center"><b><font size="5" face="Times">
@10</font><br>
<font size="4" face="Times" > Prepared Exclusively For: @8</font></b>
</div></td>
</tr>
<tr> <th width="250"><div align="left">Quote Details</div></th> <th width="50"> </th><th width="300"><div align="left">Sales Manager Info:</div></th></tr>
<tr>
<td>Quote ID: @9</td><td> </td><td>Name: @16</td></tr>
<tr>
<td>Quote Date: @15</td><td> </td><td>Email: @17</td>
<tr><td>Quote Expiration: @14</td><td> </td><td> </td></tr>
<tr><td colspan=3><div align="center"><b>Phones - Cell:</b> @18, <b>Work:</b> @20, <b>Fax: </b> @19 </div></td></tr>
</table>
Notes: @11Is there another way to get the HTML view and PDF view to look the same (or at least close)?
(more details and examples here --> [HTML and PDF Views|http://crm.nurserysupplies.com/images/CRM_HTML_and_PDF_views.doc])

To date, this is considered a product limitation. I just talked with an escalation manager regarding this very issue, and he offered to bring this up with the product managers/engineers on 5/15/09. I recommend escalating this issue and asking your escalation manager to do the same.
We are trying to create a customer contract based on Opportunity information.
The best way to accomplish what you are trying to do is: Click Printer Friendly > Click HTML > Click on File - Print in browser window > Either print to PDF using a pdf printer from adobe or the cutepdf or print a hard copy.

PDFs look different in Adobe reader and Acrobat professional compared to the built in PDF viewer on windows 8

Hi there,
I have been trying to narrow down an issue we have been having for some time in printing PDF files and finding that they look different on paper compared to screen. Up until today our big KIP plotter got the blame, but as I have been collecting notes on a little windows 8 tablet I noted that PDFs opened in the windows PDF viewer have the same visual defects as the printouts. My example today is that on a CAD drawing there is a small box/frame with a number in their, I tried printing and the frame was completely blacked out. As a test I tried saving the PDF as a TIFF file from Adobe Acrobat professional and this file had the same fault as the printed copy. When I open it in the windows 8 pdf viewer I can see that there is a shading within this box that does not show on Adobe Reader (latest version 11.0.10.32), the adobe reader and acrobat pro version both show a white background to the box. We have been having lots of issues with sections being missing from drawings and overly feint lines.
I am not sure where to start trying to narrow down why we are getting different results in different PDF readers. Is there anyone who maybe able to point me in the right direction? It almost feels like the shading or colour density is not being consistent when PDFs are being opened in different packages.
Thanks in advance
Andy

Some PDF viewers comply with the PDF ISO Standard (ISO 32000) "just enough" while others (such as Adobe's) fully comply.
As with anything there's a cost to using anything that comes from a "just enough" approach.
Be well...

FR PDF view format adjustment

FR report works fine in HTML view But it doesnt fit fine in pdf print . Is there any way i can adjust my pdf view and users want to view report in portrait format
can information on this will be really helpfull
thanks

i was able to fix from page set up
thanks

Issues with setting "Maked Reader the default PDF viewer" with Adobe Customization Wizard XI

I am using the Adobe Customization Wizard XI. I have set the following options in the Adobe Customization Wizard.
Personalization Options
Enabled the checkbox for Suppress display of End User License Agreement (EULA)
Installation Options
Selected the radio button for Make Reader the default PDF viewer
Run Installation: selected radio button Silently(No Interface)
Security
Enhanced Security Settings - Clicked drop down and set value to Disable
Online Services and Features
Checked Disable product updates
Checkd In Adobe Reader, disable Help > Purchase Adobe Acrobat
Checked Disable Product Improvement Program
Checked Disable Viewing of PDF with Ads for Adobe PDF
Checked Disable all Adobe online services based workflows and entry points.
I have tried to deploy the MSI with MST via GPO and Command Line with no luck. Every time i deploy via below methods, the same result occurs, all of the options are set correctly except the "Make Reader the default PDF viewer". I know how to manually set this option via Windows or Adobe interfaces but i am looking to roll this out to the masses and would not want a bunch of service desk calls because a user clicks on an Adobe PDF file and it is not opening in Adobe Reader.
GPO
Create New Package Use AcroRead.msi
Choose Advanced
Deployment Options - Click Uninstall this application when it falls out of the scope of management.
Modifications - Select Transform file located in the folder of MSI
Command Line.
Tried these options to try and apply "Make Reader the default PDF viewer"
msiexec /i "<path>\AcroRead.msi" TRANSFORMS="<path>\TransformFile.mst"
msiexec /i "<path>\AcroRead.msi" TRANSFORMS="<path>\TransformFile.mst" /qn
msiexec /i "<path>\AcroRead.msi" IW_DEFAULT_VERB=Read
msiexec /i "<path>\AcroRead.msi" TRANSFORMS="<path>\TransformFile.mst" IW_DEFAULT_VERB=Read /qn
Anyone know how to make this setting work with the Transform file, i sure would appreciate assistance on this issue.

Instead of saving as a PDF thru Work do a Print ➙ PDF ➙ Save as PDF and it will be saved the first time with the Preview icon.

Starting PDF Viewer with file

Hi, I want use the PDF Viewer (CL_GUI_PDFVIEWER) to display a pdf file without having to open it manually.
The demo program SAP_PDF_VIEWER_DEMO works well. It opens the PDF Viewer in place, you can zoom and print the file. And you can disable buttons (we don't want the files to be saved and we don't want the user to display different files).
The problem is you have to select the file manually. If I user 'open_document' at the end of PBO to transmit the file while starting the program, the command is being ignored.
My question: Does anyone has a tip for me?
Thanks in advance yours Johannes

Hi
If you look with se24 in the class cl_gui_pdf_viewer and you look for method constructor. You will see this code:
method CONSTRUCTOR.
data: clsid(80) type c.
--- if it is Win32 ... ---
if activex = 'X'.
    clsid = 'PDF.PdfCtrl.1'.
- if it is PlatinGUI ...-
elseif javabean = 'X'.
    exit.
--- if it WebGUI ---
elseif www_active = 'X'.
    exit.
--- unknown GUI type
else.
    exit.
endif.
--- call the super-constructor ---
call method super->constructor
    exporting
      clsid             = clsid
      shellstyle        = shellstyle
      parent            = parent
Put your self a break point and change the value of
    clsid = 'PDF.PdfCtrl.1'.
to
    clsid = 'PDF.PdfCtrl.5'.
if your are lucky it will work afterwards.
perhaps you also can try
    clsid = 'PDF.PdfCtrl.6'.
but I am not sure if this will help you. With 5 it was working on my PC this activeX control was existing. If version 6 ever existed, I dont know.
If the debugging works then make a copy and change it for real.
Regards

ECL Viewer 6.0 - PDF View & Print Resolutions

Similar Messages

Maybe you are looking for