ECL viewer upgrade

Hi,
I am upgrading the ECL viewer to 5.1.2. Is is possible to load centrally in server or it has to be loaded in the individual PCs.
Prasanna

Hi,
It can be control from Server, earlier versions needed to install on each machine, but latest versions has lot of methods by which you can install centrally and control them.
You can use the following techniques for displaying documents within the Document Viewer:
HTML Control (standard setting)
HTML control is an Internet browser embedded in the SAPGUI to enable all Internet browser display techniques (direct display, plug-ins). You cannot display documents in FAX and TIF formats.
For displaying FAX and TIF formats, you can implement the display program WANG Imaging, which is supplied with every Windows installation.
This is the standard setting; you do not need to perform any Customizing.
ECL Control
ECL control is supplied by SAP and can display both TIF and FAX formats. For more information on ECL control, see the SAP library under Cross-Application Components--> Document Management -> Viewer for Displaying Original Application Files.
To activate ECL control, choose the following in the Implementation Guide (IMG): SAP Web Application Server -> Basis Services -> ArchiveLink -> Front End Communication Customizing -> Make Settings for Storage and Display.
Instead of the Document Viewer, you can use your storage system provider viewer to display documents. To do this, you need to carry out some Customizing settings for communication between the SAP system and the storage system. The Customizing settings override the standard settings. For more information, see Front End Communication.
You also have the following Customizing options for the Document Viewer:
Deactivate the Generic Object Services Toolbox.
Use your own HTML page for displaying.
To make these settings, choose the following in the IMG: SAP Web Application Server -->Basis Services >ArchiveLink> Front End Communication Customizing --> Make Settings for Storage and Display
Regards
Rehman

Similar Messages

ECL Viewer 5 raise exceptions viewing tif drawings

Hello all,
Bit of a strange one here that hopefully someone may be able to help me with...
We are (still) running 4.6C, on Ora 9.2.0.7 over Windows.
We are running 640 Gui patched to 24
We have deployed (in a failed attempt to stop the error I will describe below) ECL viewer 5.1.3.
Client machines are running XP with SP2
Error:
after entering MM03 and choosing Additional Data > Document Data we click on an attchment (doc type DRG) and choose to view via the display (glasses) icon. The tif file (which is copied into C:\temp) opens. many of the tif files (scanned drawings) have multiple pages so we move to the next page by clicking 'Navigation' > 'next'.
The problem is that after a seemingly random amount of clicks on to next pages a raise exception occurs. After the short dump it is no longer possible to view the document again as we get the error 'file c:\temp\xxxxx.tif cannot be created' and so the only way to view the drawing is either to access the file from the temp directory or completly log out of SAP and relog back in.
i have searched for notes and we were advised to deploy the 5.1.3 viewer which only seems to have made it worse because before the 5.1.3 deployment we were getting many short dumps but the user oddly didn't see the short dump on their screens - now 5.1.3 is in place the user now sees the short dump and calls the support desk very often.
Has anyone been unfortunate enough to have experienced this before or anyone got any brain waves????
yours thankful in advance and loosing the will to live,
Andy
ps here is the short dump extract:
                                                                                Error analysis
A RAISE statement in the program "CL_GUI_CFW====================CP " raised the
exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"RAISE_EXCEPTION"
"CL_GUI_CFW====================CP " or "CL_GUI_CFW====================CM00P "
"UPDATE_VIEW"
or
"CL_GUI_CFW====================CP " "CNTL_ERROR"
or
"SAPMMG01 " "CNTL_ERROR"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.

Hi Andy,
I would recommend you to upgrade to the latest available ECL Viewer version 6.
Please see SAP note 1083901.
Further please upgrade also your SAPGUI to the latest patch level as explained in note 164203. After this upgrade please un-install your ECL Viewer 5.1.3 by using one of the following mehtods:
Search for WebViewer2d.dll file. If it is present at more than one place then it means ECL Viewer is installed more than once without uninstalling the previous version (You can check the folders and should be able to see all the dll's for ECL Viewer such WebViewer3d.dll/Printing.dll etc to make sure that there is not only single file but the whole installation).
In this case:
A) Uninstall the version integrated with SAP GUI by using SAP Installation scripts. You need to uncheck the 'EAI Viewer' component in 'General Add-on' option.
B) Check add/remove program and if there is an entry like SAP Viewer, uninstall it.
After this search again, and you should not get WebViewer2d.dll file on machine. Now reinstall the latest Viewer. This should solve most of the issue related to inconsistencies.
Then install the latest ECL Viewer 6 and the issue should be solved.
Best regards,
Christoph

ECL Viewer Color (not background)

Hi,
Does anyone know where in the registry personal settings for COLOR in ECL Viewer is stored? I have succesfully set the background color to white using key ImageViewUtils to "ffffff". But how to set the color of the drawing? I want to use "monochrome" but when changing the setting in ECL to "monochrome" drawing is ok, but I cant find the reg key holding the information. No additional keys are added under ImageViewUtils, so I guess its stored somewher else?
If someone has an idea as how to set color via registry entry it would be much appreciated.
We're on ECL 6.1.
Thanks,
Best Regards,
Søren

Hi,
check by adding EAIWeb.webviewer2D.1 %SAP-CONTROL%MAXSIZE% in tcode DC30 for Define workstation application -> Define workstation application in network -> Application (path & program) for pc.
I would recommend you to upgrade to the latest available ECL Viewer 6.1 patch because with this version the display quality should be better and it is not necessary to set this flag.
Hope this helps.
Regards,
Deepak Kori

Problem view TIFF multipage images with ECL Viewer 5.1.3

Dear All,
using the SAPGUI 710 and CV04N, I cannot view the same TIFF multipage image twice in ECL Viewer, the second time, the first time every thing is ok, but the second time the SAPGUI display the error : "File C:Docume1dupondLOCALS1TempZEP_0457895 cannot be created"
To view again the TIFF mulitpage image, I need to kill the sapLogon.exe process and relaunch it again.
It seams the TIFF image file is locked by the the saplogon.exe process the first time and on the second time, SAP cannot rewrite the temporay TIFF image file.
Notes:
- I use CV04N or CV03N to view the documents.
- This problem doesn't happends with non multipage TIFF image.
- Tested on more than 20 computers.
- Computers are with Windows XP SP2 + SAP GUI 7.10 Compilation 2 + SP9 + SP12 + - ECL Viewer 5.1.3 (integrated with Comp 2)
How can I fix this problem ?
Thank you for your help
I think this is not the correct forum to post this king of problem, i create the same post on
Expert Forums » Application Server » SAP GUI » [Problem view TIFF multipage images with ECL Viewer 5.1.3|;
Edited by: Patrick Zufferey on May 5, 2009 11:41 PM

Can you upgrade the ECL viewer to version 6.0 and check whether the same problem still exists? you can download from service.sap.com

Problem with Ecl Viewer

Hello friends,
                    I am working on a program for 3D image rotation. The .stl file is opening properly and I am able to rotate it.
                    Now my problem is when I use the redlining feature,I am able to add a comment on the image but when i click save button provided in the toolbar the file gets saved with .xxx and .vpl extension.
                    What i want is when i add a comment on the image and save it,the comment should appear again when i open the file next time,but currently this is not happening.
                    How to do this ????
Edited by: Amit Sawant on Apr 30, 2008 11:51 AM
Edited by: Amit Sawant on May 21, 2008 11:13 AM
Edited by: Amit Sawant on May 21, 2008 12:16 PM

Can you upgrade the ECL viewer to version 6.0 and check whether the same problem still exists? you can download from service.sap.com

Error while installing ECL viewer 6.0

Dear Gurus,
I tried installing the ECL viewer 6.0 with followin steps...
1. un installed the previous version by deselecting the viewer in "general add-ons" of the gui setup.
2. Checked for the Webviewer2d.dll..... no trace
3. installed the ECL Viewer 6.0.
Now according to the note 866612, step 3, I could not find the
eaisupport.jar,eaisupportS.jar,VisWeb.jar,VisWebS.jar files at location C:\Program Files\Common Files\SAP Shared\System\java
Because of this, the viewer is not getting called up or throwing error.
Please help.
Thanks in advance!
Ramesh Manoharan

Error was resolved with new installation of 'SAP GUI 7.10 core'.
ECL 6.0 viewer comes as an add-in in the gui.
refer SAP note 1302717
Thanks
Ramesh Manoharan

Problems using ECL Viewer to display multipage TIFF Files

Hey there!
Maybe someone here may have a good hint due to our problem?
The Situation as it is:
We are using ECL Viewer to display multipage TIFFs.
The Process looks like following:
The first step is to show a list of files situated in the user's personal folder(Network-Share).
Then the user selects one of these Files through a mouse-click -> The File is displayed via ECL Viewer.
Now the user selects the personal-Id where this file should be connected to and selects "SAVE".
The Programm closes the Viewer and saves the Data in SAP Archiv.
>> Everything works fine till here.<<
But now the last processing-step would be to delete this file from the user-folder.
(So next time the users starts it there will be only files he/she has to work on...)
Here an error message is telling us that the file can not be deleted because there s some kind of file lock set...
This problem only occurs only during processing multipage-Tiffs after paging down (swiching to page 2,3,4...) once at least.
Any Idea what's the cause here - or how to get through it?
We are using a CL_GUI_CUSTOM_CONTAINER objekt as base -> hooked on that is a CL_GUI_ECL_VIEWERBOX and the TIFF itself is displayed wit an I_OI_DOCUMENT_VIEWER objekt.
Maybe we get confused while destroying the "Connections" to the FIle oder something with Automation Queue Handling is not implemented right?
Thanx for any idea, hints, or better practices
Very kind Regards from Austria!
Daniel

Hi MaryAbraham,
Since the issue regards ASP.NET and website deployment. I suggestion you post the question in the ASP.NET forums at
http://forums.asp.net/. It is appropriate and more experts will assist you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ECL viewer printing format failure (A4- letter)

Hi all,
we are using ECL Viewer 6.0 Patchlevel 5 for viewing and printing CAD Drawings in purchasing, production, QA and so on. We are on SAP ECC 6.0 ( EA-APPL: SAPKGPAD17), and our SAPGUI version is 7.20 Patchlevel 1.
Our designers are using the CAD integration to Solidworks and when they save their work, a TIF file gets created and stored in the same DIR as the original CAD file. The drawing formats are mostly A3 and A4.
Now it happens really often that a user tries to print A4 TIF from ECL viewer which fails, because its sended to the printer in letter format. Since we do not have letter format in our printers, the printout hangs in the printer. All settings and defaults in the printdriver are set to A4, nowhere letter format is set. This seems to be a problem, since we switched companywide to Xerox Printers.
Could this be an issue between ECL-viewer and the global print driver from Xerox which we use everywhere?
Thanks and regards
Martin Schneider

Hi Martin,
some time ago I got an reg-file from our development and in this file the following registry keys will be be set
[HKEY_CURRENT_USER\Software\SAP\VCT_Retained\5.1\Common\C\Printing\CurrentDefaults\Print Defaults]
"Version"=hex:01,00,00,00
"NumCopies"=hex:01,00,00,00
"PrinterName"="
NITTANY
LJ4000"
"FullPathNameFlag"=hex:00,00,00,00
"Collate"=hex:00,00,00,00
"PrintToFile"=hex:00,00,00,00
"PrintAll"=hex:00,00,00,00
"PrintAsMonocolor"=hex:00,00,00,00
"PaperSize"=hex:09,00,00,00
"PaperLength"=hex:ea,0a,00,00
"PaperWidth"=hex:6f,08,00,00
"Orientation"=hex:00,00,00,00
"PrintScale"=hex:00,00,00,00
"ScalePercentage"=hex:64,00,00,00
"PrinterLanguage"=hex:00,00,00,00
"PrintQuality"=hex:00,00,00,00
"PreviewQuality"=hex:00,00,00,00
"WaterMark"=""
"WaterMarkEnabled"=hex:00,00,00,00
"WaterMarkAutoAdjust"=hex:00,00,00,00
"WaterMarkRed"=hex:00,00,00,00
"WaterMarkGreen"=hex:00,00,00,00
"WaterMarkBlue"=hex:00,00,00,00
"WaterMarkFont"="Arial"
"WaterMarkTextDirection"=hex:01,00,00,00
"WaterMarkFontSize"=hex:0c,00,00,00
"WaterMarkLayer"=hex:01,00,00,00
"LinkedFlowchart"=hex:00,00,00,00
"PrintBlankPages"=hex:00,00,00,00
"BypassPrinterDriver"=hex:00,00,00,00
"RollPaperAutoSize"=hex:00,00,00,00
"BannerHdrCntrTxt"=""
"BannerHdrLeftTxt"=""
"BannerHdrRgtTxt"=""
"BannerFtrCntrTxt"=""
"BannerFtrLeftTxt"=""
"BannerFtrRgtTxt"=""
"BannerHeaderEnabled"=hex:00,00,00,00
"BannerFooterEnabled"=hex:00,00,00,00
"BannerRed"=hex:00,00,00,00
"BannerGreen"=hex:00,00,00,00
"BannerBlue"=hex:00,00,00,00
"BannerFontName"="Arial"
"BannerFontSize"=hex:0c,00,00,00
"ImageAlignment"=hex:04,00,00,00
"PrintFullView"=hex:00,00,00,00
So the path here is "HKEY_CURRENT_USER\Software\SAP\VCT_Retained\5.1\Common\C\Printing\CurrentDefaults\Print Defaults". The only things which may differ are the value '5.1' which is based on the currently used version. But please check the registry keys in this area and made sure that the value for "PaperSize" is "09,00,00,00".
Best regards,
Christoph

CAD drawing is not opening in DMS ECL viewer

Hi Experts,
I have attached & check-in the AutoCAD drawing in document of DMS server.
Now I have double click the the above documents in CV02N or CV03N, the CAD document didn't open & I get the following message:
A pop-up come with 2D Viewer: Unable to Open document, After click on OK button following message displayed:
" File C:\_User_PS301 is not a valid format "
FOllowing setting done in customizing:
Type(Data Car) Appl   Applicaion Type   Desciption    Application Path & Program
LO     ACD     1     Autocad     %EAIWeb.webviewer2D.1 %SAP-CONTROL%
LO     ACD     2     Autocad     %EAIWeb.webviewer2D.1 %SAP-CONTROL%
LO     ACD     3     Autocad     %AUTO%
Please suggest what can be done
Regards
Bipin Shrivastav

Dear
First check ECL Viewer is there !!!?
For viewing autocad file in SAP ECL viewer you have to check setting in SPRO
Steps:
SPRO--->General Data >Define Workstation Application>Select ACD(Autocad file type)-->Clcik Define workstation application in network --> Add new Entry -->
Type || Appl || AT || Description || Application(path and program name)
PC || ACD || 1 || Autocad || EAIWeb.webviewer2D.1 %SAP-CONTROL%
PC || ACD || 2 || Autocad || %auto%
PC || ACD || 3 || Autocad || %auto%
This will solve your problem
Regards
Tushar Dave

ECL Viewer could not view TIFF file in TC OAOR

Hi,
did You meet that problem with the viewer?
I use TC OAOR and I'v got an error 'Error when calling a method of VIEWER2D_CONTROL Message no. SBDS323'. I use option in-place to view document from HTTP content server repository (IBM Filenet). When I deactivate this option the document is open in viewer in new window - TC SDV is working - so I know that document exist and is stored in repository.
In TC OAG1 I set option 'Include ECL Control'. I set configuration in TC DC30 according link http://wiki.sdn.sap.com/wiki/display/PLM/DocumentManagement%28CA-DMS%29 -> ECL Viewer (CA-DMS-EAI)
I use GUI 720 w patch level 2 and ECL Viewer 6 with patch level 7. ERP: SAP R/3 Enterprise (4.7).
Can anyone help me?
Regards,
Kaz

Hi,
topic on OSS 761526/2010.
Solution: install ECL Viewer 7.0 - available since March 2011.
Regards,
Kaz

How to add the toolbar for ecl viewer in BSP

i took help of the following link
/people/durairaj.athavanraja/blog/2005/09/14/using-ecl-engineering-client-3d-viewer-viewer-in-bsp-application
the 3D image in opening properly.
My question is, is it possible to add the TOOLBAR in the Internet explorer which get normally in Ecl Viewer which has the options like file tools etc
Edited by: Amit Sawant on May 28, 2008 1:03 PM

the control doesnt come with the toolbar. in ABAP they are implemented using the methods in the dll. similarly you have to create the toolbar for your webapp as well.
Raja

Does SAP ECL viewer has drag and drop functionality...

Hi,
Does ECL viewer has drag and drop functionality for example we can drag and drop file from windows sever to SAP. So that it can be used later on using BDN.
Thanks.
Regards,
Rajesh.

Implement this program, it is a cut/paste solution. Again, you must have the ECL component installed on your SAPgui.
report zrich_0001 .
parameters: p_check type c.
start-of-selection.
at selection-screen output.
data: dockingleft   type ref to cl_gui_docking_container,
        dockingright type ref to cl_gui_docking_container,
        ecl_viewer   type ref to cl_gui_ecl_2dviewer,
        html_viewer type ref to cl_gui_html_viewer.
data: repid type syrepid.
data: url(2048) value 'c:'.
repid = sy-repid.
check dockingleft is initial.
create object dockingleft
              exporting repid     = repid
                        dynnr     = sy-dynnr
                        side      = dockingleft->dock_at_left
                        ratio     = 50
                        extension = 1000.
create object html_viewer
       exporting
            parent    = dockingleft.
call method html_viewer->show_url
       exporting
            url       = url.
check dockingright is initial.
create object dockingright
              exporting repid     = repid
                        dynnr     = sy-dynnr
                        side      = dockingright->dock_at_right
                        ratio     = 50
                        extension = 1000.
create object ecl_viewer
      exporting
         parent             = dockingright
      exceptions
         cntl_error         = 1
         cntl_system_error = 2
         create_error       = 3
         lifetime_error     = 4
         others             = 5.
     call method ecl_viewer->create_toolbar
        exporting
            close_button      = ' '
            tools             = 'X'
            viewer            = 'X'
            navigation        = 'X'
            options           = 'X'
            viewer_openfile   = 'X'
            viewer_savefile   = 'X'
            tool_measurement = 'X'
            remove_document   = ' '
        exceptions
            cntl_system_error = 1
            cntl_error        = 2
            cntb_btype_error = 3
            dp_error          = 4 .
Now drap a PDF file from the left container, and drop in the right side. Slick, right?
The ECL doesn't handle every file type, but PDF works good.
Regards,
Rich Heilman

Stamping PDF files in the ECL Viewer

Dear All, I have a problem that i can't write a stamp text on the PDF files in ECL Viewer, it works with all original types like dwg,dxf,jpg,gif,bmp,... except pdf.
I am using the method SHOW_DOC_META_DATA in the badi defination DOCUMENT_ECL01.
Here is my code, Please Advise.
Thanks
METHOD if_ex_document_ecl01~show_doc_meta_data.
DATA: BEGIN OF line,
          a(20) TYPE c,
          v(50) TYPE c,
        END OF line.
Adjusting Viewer Settings
y_position = 35.
x_position = 25.
font = 'Arial'.
size = 1.
color = 255.
transparent = 'X'.
Printing Line#1
line-a = 'Document#'.
line-v = 'Test'.
INSERT line INTO meta_data INDEX 1."Here is the problem
ENDMETHOD.

Hi,
maybe SAP note 690497 could help you.
It's an enhancement of BADI DOCUMENT_EC01 to control the behavior of the EAI-viewer. You can use it, for example, to:
o Activate functions like saving or opening in the
   viewer or
o Dectivate functions like saving or opening in the
   viewer
o Implement customized authorization checks for
   Redlininng Layer
Best regards,
Christoph

Menu Buttons of ECL Viewer

Hello,
we are going to use ECL Viewer 6.0 for our Invoice approval process (D2-Format FAX and TIFF).
Due to SAPGUI Update from 6.40 to 7.10 we had to get rid of the AL_Viewer, which ist not supported anymore. Now we have some limitations with the handling of the ECL Viewer: There are no Menu buttons, short cuts or hotkey for easy Document viewing control , like zoom, shift, resize etc. These are only available with context menue (right mouse click): Navigation ....
Are there any posibilites of customizing the navigation within the viewer window ?
Kind Regards,
Josef Janetzko

Hi Josef
/*There are no Menu buttons, short cuts or hotkey for easy Document viewing control , like zoom, shift, resize etc. These are only available with context menue (right mouse click): Navigation ....*/
The navigation option is present in the menu option also. But for them to appear in the menu go to options and there u have to select the menu options which you want to make as visible. Pre requisite is ECL viewer has to be installed on the machine.
You can find help on this in sap help->DMS->Function overview of 2d formats-> settings for 2d formats.
Regards
Prasad

ECL Viewer Redlining does not work in cFolders for PDF

Hi,
I am using cFolders 4.5 with ECL viewer 6.0 patch level 4. Redlining functionality works for AutoCAD and graphics files such as JPG. However, when I try to use the redlining functionality on a PDF I get the message "This feature is currently not supported. Please contact your cFolders system administrator. The ECL viewer will shut down".
Any ideas on why this is happening. Is there anything specific I need to do to enable redlining for PDF files on cFolders.
Thanks,
Lashan

Hi Lashan,
This can be only realized in form of a modification.
To get the functionality, you have to change the code of BSP page
'doc_de_redline.htm'. You can find this information at transaction SE80
> BSP application 'CFX_RFC_UI' > Pages with Flow Logic
Switch to Layout:
<! object width="800px" height="500px" classid="clsid:E5B45843-BBE0-11D4-A7A4-0060087A7901" alt="Please wait....." >
<PARAM name="DIM" value="<%= P_FORMAT %>"></PARAM>
<PARAM name="DOWNBASEURL" value=""></PARAM>
<PARAM name="BASEID" value="<%= P_BASEID %>"></PARAM>
<PARAM name="BASENAME" value="<%= p_basename %>"></PARAM>
<PARAM name="BASEDESC" value=""></PARAM>
<PARAM name="BASETYPE" value="<%= p_fileext %>"></PARAM>
<PARAM name="BASEMIME" value="<%= p_bmimetype %>"></PARAM>
<PARAM name="LAYERCOUNT" value="<%=p_layercount%>"><(>
<<)>/PARAM>
> ENTER CODE HERE <
<! Liste der Layers >
<% l_index = 0.
Add at the comment the following line:
<PARAM name="PDFSUPPORT" value="1"></PARAM>
Regarding redlining of pdf files:
Please create a file" EAI Viewer.xml " and place the below xml code in the file. save it.
Code is as follows:
<?xml version="1.0" encoding="utf-8" ?>
- <settings created="20050719120931" name="EAI Viewer">
<Created>X</Created>
- <Format>
- <Description>
<PDF>Adobe Acrobat (*.pdf)</PDF>
<SAP_WFE>SAP cProject Suite start file (*.sap_wfe)</SAP_WFE>
<PGP>PGP encrypted file (*.pgp)</PGP>
<JT>EAI DirectModel (*.jt)</JT>
<VRL>VRML (*.vrl)</VRL>
<WRL>VRML (*.wrl)</WRL>
<STL>Stereolithography (*.stl)</STL>
<PS>PostScript I, II (*.ps)</PS>
<EPS>Encapsulated PostScript (*.eps)</EPS>
<DGN>Microstation (*.dgn)</DGN>
<PCX>PC Paint (*.pcx)</PCX>
<PICT>Macintosh Paint (*.pct)</PICT>
<PCT>Macintosh Paint (*.pct)</PCT>
<RAS>Sun Raster (*.ras)</RAS>
<GIF>Graphic Interchange Format CompuServe (*.gif)</GIF>
<C4>EDMICS C4 (*.c4)</C4>
<PNG>Portable Network Graphics (*.png)</PNG>
<JPG>JFIF Compliant (*.jpg)</JPG>
<JPEG>JFIF Compliant (*.jpg)</JPEG>
<BMP>Windows Bitmap (*.bmp)</BMP>
<TIF>Tagged Image File Format (*.tif)</TIF>
<TIFF>Tagged Image File Format (*.tif)</TIFF>
<MLR>CALS MIL-R I,II (*.mlr)</MLR>
<MIL>CALS MIL-R I,II (*.mi)</MIL>
<_907>Calcomp (*.907)</_907>
<_906>Calcomp (*.906)</_906>
<cals>Calcomp (*.cals)</cals>
<MI>HP ME 10/30 (*.mi)</MI>
<HPG>HPGL/HPGL-2 (*.hpg)</HPG>
<HPGL>HPGL/HPGL-2 (*.hpgl)</HPGL>
<IGS>IGES (*.igs)</IGS>
<CGM>Computer Graphic Metafile (*.cgm)</CGM>
<DWF>AutoCAD (*.dwf)</DWF>
<DXF>AutoCAD DXF R11-14 (*.dxf)</DXF>
<DWG>AutoCAD DWG 2.5-14 (*.dwg)</DWG>
<MDL>(*.mdl)</MDL>
<MPC>(*.mpc)</MPC>
</Description>
- <Mimetype>
<PDF>image/pdf</PDF>
<SAP_WFE>application/sap_wfe</SAP_WFE>
<PGP>application/x-pgp</PGP>
<JT>application/x-jt</JT>
<VRL>model/vrml</VRL>
<WRL>model/vrml</WRL>
<STL>application/stl</STL>
<PS>application/postscript</PS>
<EPS>application/postscript</EPS>
<DGN>model/vnd.dgn</DGN>
<PCX>image/pcx</PCX>
<PICT>image/pict</PICT>
<PCT>image/pct</PCT>
<RAS>image/ras</RAS>
<GIF>image/gif</GIF>
<C4>image/c4</C4>
<PNG>image/png</PNG>
<JPG>image/jpeg</JPG>
<JPEG>image/jpeg</JPEG>
<BMP>image/bmp</BMP>
<TIF>image/tiff</TIF>
<TIFF>image/tiff</TIFF>
<MLR>image/mlr</MLR>
<MIL>image/mi</MIL>
<_907>image/907</_907>
<_906>image/906</_906>
<cals>image/cals-1840</cals>
<MI>image/mi</MI>
<HPG>image/hpgl</HPG>
<HPGL>image/hpgl</HPGL>
<IGS>application/iges</IGS>
<CGM>image/cgm</CGM>
<DWF>model/vnd.dwf</DWF>
<DXF>image/vnd.dxf</DXF>
<DWG>image/vnd.dwg</DWG>
<MDL>image/mdl</MDL>
<MPC>image/mpc</MPC>
</Mimetype>
- <Redlineable>
<PDF>2</PDF>
<SAP_WFE>0</SAP_WFE>
<PGP>0</PGP>
<JT>3</JT>
<VRL>3</VRL>
<WRL>3</WRL>
<STL>3</STL>
<PS>2</PS>
<EPS>2</EPS>
<DGN>2</DGN>
<PCX>2</PCX>
<PICT>2</PICT>
<PCT>2</PCT>
<RAS>2</RAS>
<GIF>2</GIF>
<C4>2</C4>
<PNG>2</PNG>
<JPG>2</JPG>
<JPEG>2</JPEG>
<BMP>2</BMP>
<TIF>2</TIF>
<TIFF>2</TIFF>
<MLR>2</MLR>
<MIL>2</MIL>
<_907>2</_907>
<_906>2</_906>
<cals>2</cals>
<MI>2</MI>
<HPG>2</HPG>
<HPGL>2</HPGL>
<IGS>2</IGS>
<CGM>2</CGM>
<DWF>2</DWF>
<DXF>2</DXF>
<DWG>2</DWG>
<MDL>2</MDL>
<MPC>2</MPC>
</Redlineable>
</Format>
</settings>
please upload this to your WebDAV (replace the old one and save this under a different name as
backup). The way to access WebDAV is explained in the cFolders configuration guide, chapter 'Creating the Settings URL for WebDAV Access' (the guide is attached to note 973764).
I hope that this information help you to solve the issue.
Thanks and Regards
Bhaskar

ECL viewer upgrade

Similar Messages

Maybe you are looking for