Eclipse C/C++won't run on my computer
I have the latest version on Java installed on my Mac but when ever I try to run Eclipse C/C++ is says I JVM 1.7.... please help
This help appears on the eclipse web site:
Configure Eclipse to use the JVM
It is strongly recommended to configure Eclipse with the specific JVM that you want. See the instructions at Eclipse.ini This is a very important step to be sure that Eclipse is using the JVM you intend and can't be influenced by any other software that might alter your system. The JVM used to launch Eclipse has no affect on whether it can compile Java sources for other Java language versions.
source:
https://wiki.eclipse.org/Eclipse/Installation
Click on eclipse.ini in the text above to go to the page that deals with it, then click in the contents for Mac OS X specific instructions.
This is a common thing to have to do for Linux, much less so for Mac OS X.
Similar Messages
-
I am trying to update my mac to os x snow leopard but the cd won't run on my computer
I am trying to update my mac to os x snow leopard but the cd won't run on my computer. I'm using an external dvd hardrive but I don't see why that would make a difference in wether or not it runs.
Well, that may be the cause of the no install problem, as Snow Leopard does require at least 1gB of RAM. The Apple link below will show how it is installed.
http://support.apple.com/kb/ht1651#link3
The link below is for a highly recommended site to purchase additional RAM.
http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/Macbook_ selector -
I replaced Firefox 3.6 with version 4 which won't run on my computer. How can I reinstall Firefox 3.6?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
I downloaded version 4 and replaced the old files. The new version won;t run because my Mac dose not have an Intell prossesor. I uninstalled the new version and I cant find the old version to download.
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
Microsoft Office won't run on new computer
I bought a new G5 and did the complete disk transfer when I booted the new system up. Now I'm getting a message that says the "test drive" of Office is complete and I need to register a new product. Can anyone tell me why this is and how I fix it without having to buy another very expensive software package.
I just got a Mac mini and had the same problem. On investigating my Applications folder, it seemed that I'd transferred the old Microsoft Office stuff okay through my firewire, but there was also a 'test drive' version of it in there as well. This meant I could open Word / Excel etc fine from the dock, and then open documents within it, but if I tried to click on a document in the finder window or on the desktop, I got the 'test drive has expired' message.
Deleting the test drive version seems to have got round the problem. (Although just occasionally a file won't open, and gives me some other kind of error message which I can't remember, and of course it won't do it now!)
However, one problem I am having is that it won't automatically open Word attachments in Mail, and I have to manually tell it which program to use every time. Anyone know how to fix this one? -
Moneywell won't run on new computer
I just purchased a new imac. I transferred applications from my macminit from a backup drive. When I try to run the Moneywell application, it wants me to log into the Mac App store and install it. The Mac App Store application says it is installed. So far, everything else I purchased from the app store works.
This thread concerns applications for Mac.
The problem was generated when using the migration assistant on a disk from my previous computer. This resulted in the situation where the Mac App Store thinks the application is installed, but when running the application, the application code sees itself as not installed correctly. Simply deleting the versions did not work. The Mac App Store still found the application installed. The problem was resolved by searching the disk to find associated configuration files. Once these were deleted, the Mac App Store sees the application as uninstalled and will allow the application to be installed.
Thank You. -
Why won't Firefox 3.6.9, run on my computer?
I ran Firefox 3.6.8 on my computer all the time and it ran just fine. However, when it updated to Firefox 3.6.9, it now won't run on my computer. I get an error message after waiting several minutes and trying to load a webpage that always says, "Your connection has timed out." Any idea what might have caused this or what I can do to fix this issue. I've tried reinstalling as well. edit
This may be caused by a Firewall blocking the new version of Firefox. See [[Firefox cannot load websites but other programs can]]
-
I just purchased a MacBook, it is my first Mac. Anyway, I've loaded Spore and downloaded all of the updates but it won't run on my computer. When I start the program the Spore splash page is displayed and it just hangs there. I can't end the program, it's unresponsive. Performing a force quit is the only way that I have found to exit.
I am very new in the Mac environment, I'm sure there is a simple solution here but I'm lost. How can I get Spore to run?
ThxRogueBalog , welcome to Apple Discussions.
You posted in the Older Apple Hardware forum, which is for G3 Macs& older. You should post in the G5 forum at http://discussions.apple.com/forum.jspa?forumID=596
Here's the spec sheet on your G5. http://www.everymac.com/systems/apple/powermacg5/stats/powermac_g5_2.0_dp2.html You have a newer Mac than most of the discussion members. The first upgrade would be to increase RAM. The max RAM is 8GB. You should be able to run most current software.
Cheers, Tom -
Something funny. 3DMark 2001 won't run on my computer. It gives me an error message saying it needs DirectX 8.1 or higher to run, but i have DirectX 9 installed on my machine. I am able to run 3DMark 03 with no problems (with a score of 3660.. is this bad?)
Anyone know any quirky things with 3DMark 2001 that would make it not able to run?thanks pterhune.
btw.
my 3DMark 03 score is 3660.
my Aquamark score was about 28,800.
are these scores a little low for my system? I know the 3DMark 03 one surely must be. I'm wondering what I can do to get my scores up a little bit. I still am getting those stuttering frames in final fantasy XI sometimes. I figure if I could optimize some things I might increase my benchmark scores, and also eliminate the frame stuttering. -
The Capitvate 4 demo won't run on my computer even though it
appears to install fine, and I'm stumped. Actually, the program
wouldn't launch after installation, then suddenly was able to
launch just once, then it wouldn't launch again. I get the splash
screen, and then nothing.
I've followed all of Adobe's troubleshooting advice and what
common sense I have: installed as an admin, installed in limited
mode, uninstalled, reinstalled, rebooting in between. I have
Windows XP service pack 3 with all the latest updates and my
computer is a Core2Duo with 1.5 GB of RAM.
Looking at the install logs, one seems to repeat itself three
times with putting files into directories, and each time ends with
the following text:
=== Logging stopped: 2/4/2009 17:52:24 ===
Installation result: 0
[ 3664] Wed Feb 04 17:52:24 2009 ERROR
Log of: object
isRunning {string}: 0
percentComplete {string}: 100
message {object}: [object Object]
Log of: object
code {string}: 0
args {object}: [object Object]
[ 3664] Wed Feb 04 17:52:26 2009 INFO
Any ideas would be appreciated.
TedWell I'm going to have to use my favorite F word here.
Frapdoodle!
Sorry that didn't help. About the only thing I can think of
to recommend is to submit a Bug Report.
Click
here to view the WishForm/Bug Reporting Form
Perhaps Adobe will pick up on it and contact you. You may
wish to try E-Mailing Support, but I've seen reports here that
Adobe Support is reluctant to assist with anything trial related.
Seems odd to me, but that's what I have heard.
The link to reach support is listed below:
Click here
Best of luck to you! Rick -
Java JDK 7 u17 won't install and Eclipse won't run past boot logo.
Java JDK 7 u17 won't install and Eclipse won't run past boot logo. Eclipse Classic used to work fine for awhile. I haven't used it for a month or two and tried to boot it, Eclipse won't run past boot logo. It looks like JDK is not even there anymore. JDK won't install successfully. I have Mac OS X 10.8.3.
I tried removing Java, re-download JDK multiple times.. same results.
MyComputer-MacBook-Air:~ MyComputer$ java -version
java version "1.7.0_17"
Java(TM) SE Runtime Environment (build 1.7.0_17-b02)
Java HotSpot(TM) 64-Bit Server VM (build 23.7-b01, mixed mode)Paul Adare is correct in saying that you cannot "upgrade" from 32-bit to 64-bit. You can, however, backup your files and reload them onto your PC.
Given that you are able to boot Windows 7 after the failure to install Windows 10 Technical Preview, it is apparent that you are not formatting the drive during your clean installation. There are a number of potential issues an existing configuration can
cause, such as preventing Windows Setup from registering boot files, modifying partitions, or moving an existing installation and data to the windows.old folder. I would recommend removing the partitions from your drive (note: this will erase any data remaining
on the hard disk) during installation to ensure that Windows Setup has a fresh hard drive to install to. If you continue to experience errors, two other factors to take into consideration are:
Does your system use a storage controller that requires loading a driver during Windows Setup?
Is the hardware malfunctioning? Do the hard disk and memory pass testing software like Windows Memory Diagnostic or chkdsk?
Reference
this article for more information.
Hessam
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet -
After Workshop trial install, Eclipse won't run
Started with Eclipse 3.2.2 on Windows XP with Web Tools Platform 1.5.3. It worked fine.
Downloaded and installed Workshop_for_JSP_3.3_608.
Now when I try to run Eclipse I get an error dialog pointing me to a log file which says...
!SESSION 2007-03-22 16:14:08.859 -----------------------------------------------
eclipse.buildId=unknown
java.version=1.5.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Framework arguments: -feature com.m7.nitrox -application org.eclipse.ui.ide.workbench
Command-line arguments: -os win32 -ws win32 -arch x86 -data @noDefault -feature com.m7.nitrox -application org.eclipse.ui.ide.workbench
!ENTRY org.eclipse.osgi 4 0 2007-03-22 16:14:09.156
!MESSAGE Application error
!STACK 1
java.lang.IllegalStateException: Unable to acquire application service. Ensure that the org.eclipse.core.runtime bundle is resolved and started (see config.ini).
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:65)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
at org.eclipse.core.launcher.Main.run(Main.java:977)
at org.eclipse.core.launcher.Main.eclipse_main(Main.java:952)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.m7.installer.util.NitroxMain$1.run(NitroxMain.java:36)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)Here is the top of the Workshop install log...
Install Begin: Thu Mar 22 16:06:46 PDT 2007
Install End: Thu Mar 22 16:07:04 PDT 2007
Created with Zero G's InstallAnywhere 6.0 Enterprise Build 2262
Summary
Installation: Successful.
932 SUCCESSES
0 WARNINGS
0 NONFATAL ERRORS
0 FATAL ERRORS
Action Notes:
None.
Install Log Detail:
Check Disk Space: C:\Workshop_for_JSP_3.3_608
Status: SUCCESSFUL
Additional Notes: NOTE - Required Disk Space: 65,431,386; Free Disk Space: 79,516,352,512
Install Directory: C:\Workshop_for_JSP_3.3_608\
Status: SUCCESSFULI would appreciate any help with this.
Thanks,
EWe have a known issue on using Workshop V3.3 with the latest JDK update. This issue has been fixed internally. For now please try the workaround mentioned in the following post.
http://forums.bea.com/bea/thread.jspa?threadID=400001144&tstart=30&mod=1169490304818 -
Ok - not sure if this goes in this section or not.. but it's a technical question.
My b/f bought me a Dell Laptop last week. It has the recommended minimum of everything adobe says it needs for photoshop CS3 (see below for 1721 specs)
When I installed it on the laptop - it was slow, but said it installed. But when I go to open up Photoshop, it opens the screen - and then just hangs. After about 5 minutes it says not responding and I close it. Any of the other programs that came with won't even get that far. I click on them and it gives the little "thinking" circle (as I call it.. lol) and then nothing.
I have read that CS3 has issues with Vista - but their site says the home premium should work. I've also read about 64 bit issues.. but the OS is 32 bit - so it's capable of running 32bit systems... I guess.
I called adobe yesterday after installing and reinstalling CS3 15+ times... with the same issue. I was on the phone for about 2 hours with them. Basically - they have NO CLUE what it would be since it installs fine and opens with no error messages. I checked the log files and there is nothing in there I see that says any kind of error.
I have disable windows defender, uninstalled McAfee and google desktop (all are known to cause issues with CS3), I have ALL non MS startup services turned off.. I have turned off the MS users control.. all suggested by the adobe tech.
I have installed using the run as administrator. Nothing. Created a new admin account and installed on that user and opened on reg admin account. Nothing. (again typical things that correct cs3 install issues)
The last thing the guy said was that it might be a video issue. I checked and there aren't any issues mentioned and no driver updates listed.
We tryed installing this on my b/f's laptop. He bought the exact one I have (except his is red.. mine blue.. lol) and it does the EXACT same thing...
So today we called dell. they say it's a software issue and won't answer any questions for free. Apparently only hardware support is free... But they won't accept this is a hardware conflict with the software..
errrrr
Anybody have any clues on this?
=======================================
LAPTOP SPECS:
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz) Genuine Windows Vista Home Premium
Operating System
Genuine Windows Vista Home Premium
Memory
2 GB DDR2 SDRAM 677MHz (2 DIMMs)
Hard Disk Drive
120 GB SATA Hard Drive (5400 RPM)
Video
ATI RADEON Xpress1270 HyperMemory
Media Bay
8X DVD +/- RW w/dbl layer write capability
Base
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz)
Bluetooth Wireless
Bluetooth Wireless Card 355
Software Upgrade
Microsoft Works 8.5
Premium Pack - Advanced Photo+Music: Deluxe Pack + Paint Shop Pro XI
NoteBook Screen
17 inch WXGA+ TrueLife Glossy Notebook Screen
Hardware Upgrade
No Camera
6 Cell Primary Battery
90W AC Adapter
Network Interface Card
Dell 1505 Wireless-NRob - thanks for taking a stab at this.
I have tried installing from the DVD and also from the zip file. the zip file was extracted to the hard drive brfore I ran it - and I ran it as administrator.
And when it stalls - it gives the (NOT RESPONDING) tag on the window - which usually means that even if I leave it (and I have for up to 20 minutes) - still nothing.
Here's the update from my dealings with DEll today...
Dell tech support guy told me that it was a know issue that CS3 WON'T run on Vista and that Adobe is working the issue
Told them that I knew others that were running it on Vista and it worked fine. They had no answer.
Then I waited for the Technical support manger to call. This is after expressing my displeasure to the technical supervisor about them trying to pawn this issue off on anyone else but themselves. Why can't they go grab a 1721 off the shelf and replicate the issue and try to figure it out from there?!?!?!
I used to work on a network helpdesk.. if I tried to pull that crap answer without trying to replicate the issue and AT LEAST try to find an answer.. I wouldn't have lasted very long at all!!!!
The Tech manager told me to call customer support and ask for an OS swap (from vista to XP) because they don't know what the problem is and so it muct be a Vista compatibility issue
I call customer support. They say that they no longer will give out XP since it is a step backwards. And to install XP on the machine ourselves (even a liscensed copy) would void the warranty. They suggest I talk to sales about swapping the laptop out with a "more compatible" one. Which isn't a totally bad idea since I really do think it is an AMD/ATI conflict.
They transfer me to Sales.. ohh - you used the Employee Purchase program.. you need to talk to them.. and they transfer me.
The EPP people tell me.. ohhhh you didn't actually go through us since you bought it off the Dell Outlet store. So they transfer me.
The dell outlet store says they will be more than happy to swap me out to an Intel based machine.
Only catch is the Intels are more expensive. They don't have any for the price we paid for the amd's. Fot about $40 more I can get one with a slower processer, a gig less ram, no dvd writer, but with a 160gb hd. To get compatible to mine - would be about $150 more.
And they only have silver in the low end, and black or brown in the higher. Not that I really give a s@!t what the color is.. but it brings up the main reason I am sooo pissed abput all of this....
Why should I have to pay more money, settle on doing without option/features want/need.. just because THEY don't want to take the time to figure out what the real issue is?!?!?! Why isn't it them doing these calls and doing all this troubleshooting.. Why am I being peanilzed for THEM not wanting to do their jobs....
Told the B/F that I am done with Dell. That I don't want the laptop anymore and I don't want any other one from them. He says he'll pay the extra and get me the other one.. but that isn't the point....
Not sure what my next move is. -
How do I install the FM10 licensing fix when Adobe Update Installer won't run?
Adobe Update Installer won't run so can't install FM10 licensing fix
This question is Not Answered.(Mark as assumed answered)
Aug 9, 2013 12:09 PM
Tags (edit): none (add)
Because FM10 began crashing with "fatal" errors whenever I tried to generate a TOC for a small (65 page) book, I researched workarounds and none of them worked. Now that I have delivered a crippled deliverable via Acrobat manipulations, I would like to fix FM. I uninstalled it and reinstalled it, got some updates, and then received the "licensing fix" error that popped up in January. I'm wondering why this fix was included not in the updates. That said, the licensing fix package, first, would not unzip so I downloaded it again. I unzipped it but I got a message that Adobe Updater Installer could not run and after several clicks I found that file. I reinstalled Adoble Update Installer but it still does not run.
I am running Windows XP and have TCS 3.5.I uninstalled FM and RH but not Acrobat, Captivate, or Photoshop.
So, now what? Listen to my supervisor who says never use FM again?
P.S. Why do I have to enter a title for my question and then do it again when this page opens??Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).
-
Action steps that won't run correctly in PSE 7/8/9 (but did in 4 and 6)
I have a wonderful action that was written to work in PSE 3/4/6. It won't run in PSE 7/8/9. After fooling around for a while, I think I understand why. Adobe changed the way Adjustment Layers are handled. In earlier versions of Photoshop and Elements, Adjustment Layers threw up a modal dialog box. That changed so that Adjustment Layers now appear in the Palette Bin as a palette.
Here a sample of some of the action steps that won't work correctly:
Make adjustment layer
Using: adjustment layer
Type: levels
Set Selection
To: none
Set current layer
To: layer
Name: “Adjustment 1”
Set current layer
To: layer
Mode: luminosity
Stop
Message: “Move gray slider left”
With Continue
Set current adjustment layer
To: levels
In earlier versions of PS and PSE, the way these steps would work is that a new adjustment layer would be created, the dialog box giving the instruction would open, it would be dismissed by clicking "Continue," and then the "Set current adjustment layer to: Levels" would generate a model adjustment layer dialog box would open up which would let one make the adjustment.
In newer versions, since Adjustment Layers are handled in the Palette Bin, after dismissing the instructions, the action doesn't stop to allow the user to make change the sliders on the adjustment layer.
The action runs perfectly in CS4 and CS5 and throws up the levels adjustment modal box as it did in PSE 4 and PSE 6, but the action doesn't throw the modal box in PSE 7/8/9
Does anyone know of a way to alter the action steps to allow the action to stop to allow the adjustment and then to resume again?Adding a new levels adjustment layer on top of the Midtone contrast layer
should work, just use a clipping mask to restrict the adjustments to the
areas of the levels adjustment layer below. The histogram will be different, but
actually testing the action is really the only way to know if that makes any difference.
Replacing the levels adjustment layer is another option, though it requires a few more steps.
The following assumes when the action gets to this point,
the Midtone contrast adjustment layer is the active (selected) layer.
To record this part of the action:
1. Duplicate current channel (in the channels panel. drag the Midtone contrast mask
down to the Create new channel icon at the bottom of the channels panel)
2. Ctrl+click on the newly created channel (Midtone contrast mask copy)
This loads the selection of that channel.
3. Drag the new channel (midtone contrast mask copy) to the trash icon at the bottom
of the channels panel.
4. Back in the layers panel, delete the Midtone Contrast adjustment layer.
5. Go to Layer>New Adjustment Layer>Levels
This creates a new levels adjustment layer using the selection loaded from
the duplicated channel and opens the levels dialog.
To load the RGB (composite) as a selection, Ctrl+click on the rgb in the channels panel
and the same is true for the red, green and blue channels.
With layer masks, elements doesn't seem to want to load them as selections in actions,
so that's the reason for the action steps above.
MTSTUNER
Maybe you are looking for
-
I have two Apple accounts the one on my I phone and computer are the same the one on my mini i pad is different I have credit on my mini i pad however, when I purchase an App or movie I am charged on my credit card and the $40:00 worth of I Tune card
-
What's Wrong With Safari 4? I Need An Answer...
The menu bar (file, edit...etc) except for Develop all say 'localized string not found'. Everytime a page loads it says the same thing. I just removed the menu bar, cause I didn't know what everything is. Is it just my computer or is everyone else wh
-
I have had a new mac for over a month now and I cannot get my Firefox menu or bookmarks onto the new Mac. I signed up for Firefox Sync. It didn't work either. I'm frustrated and disappointed. I have 100's of favorite bookmarks.
-
Viewing multiple rows in a database.
Hey, I've been stuck on a problem for a while now. I know that JDBC 1.0 does not allow scrollable resultsets or provide a rowcount method. I know because of this two resultsets are needed,one to get the number of rows and the other to get the values
-
I have had this printer for about six months. It will not print a test page but will print a demo page. It will not print anything using the black cartridge. I have replaced the cartridges and it still will not print. I have uninstalled the softwa