Eclipse error : The declared package does not match the expected package

I'm trying to setup an Eclipse project on some existing code but I can't get past this error. The source files are in the following directories:
d:\mycompany\coolstuff
d:\mycompany\neatstuff
The source files in the coolstuff directory have a package statement:
package mycompay.coolstuff
The source files in the neatstuff directory have a package statement:
package mycompany.neatstuff
I create a new Eclipse Java project, specify the existing directoy of d:\mycompany. When Eclipse tries to build, it gives the following error:
The declared package "mycompany.coolstuff" does not match the expected package "coolstuff"
I've tried everything I can think of short of modifying every package statement since they seem correct based on the Java documentation. What am I missing?

All the source builds just fine using a command
nd line and a classpath=.\That's meaningless, since classpath=.\ is just setting the classpath to the current directory.
d:\mycompany\coolstuff
d:\mycompany\neatstuff
The source files in the coolstuff directory have a
package statement:
package mycompay.coolstuff
The source files in the neatstuff directory have a
package statement:
package mycompany.neatstuff
I create a new Eclipse Java project, specify the
existing directoy of d:\mycompany.When you use the package statement "package mycompay.coolstuff" Eclipse looks in the directory above mycompany for mycompay\coolstuff\<classname>, and that directory is d:\, not d:\mycompany.
When Eclipse
tries to build, it gives the following error:
The declared package "mycompany.coolstuff" does not
match the expected package "coolstuff"

Similar Messages

OCS package does not match the current software component vector

Hello TECHIES,
Please help me with following error it is very emergency
We had developed an ADD-ON in CRM7.0 and when we try to Install in it into CRM EHP1 server
we get the following error:
OCS package does not match the current software component vector"

"emergency" errors should be handled through OSS/CSN, not here on the forum.
The error message means that the source system has a different support package level than the target system.
Markus

The publisher of the uploaded package does not match the expected publisher . The publisher for this app is expected

I have a Windows Phone Silverlight 8.1 project that i am trying to publish
The publisher in the uploaded package does not match the
expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
I have the same Publisher Id set in the WMAppManifest file
help me
thank you

Hi kadir u,
>>The publisher in the uploaded package does not match the expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Based on the error information, we can see that the publisher value does not have the correct one. So please try to open the Package.appxmanifest, then modify the Publisher as "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358":
<Identity Name="*******"
Publisher="CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Version="1.0.0.0" />
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The publisher in the uploaded package does not match the expected publisher.

I have an existing Windows Phone 8 application in which I wish to release an update to. This update includes new features as well as targets the 8.1 platform. Because of an unknown problem with the original Visual Studio project
where the app stopped being able to be deployed to test devices, it was faster to create a new Visual Studio project and copy over the existing code and assets than try and find the issue in the original project. This lead to the publisher GUIDs being different
between the new and original projects.
Now when I try and submit the updated package within the Windows Phone Online dashboard I get the following error message "The publisher in the uploaded package does not match the expected publisher. The expected publisher
for this app is: "CN=0745C81D-D1ED-49ED-A219-C546B5F31DE5"".
I have updated both the WMAppManifest and Package.appxmanifest so that they have the following attributes and information:
Package.appxmanifest (PhonePublisherId="0745C81D-D1ED-49ED-A219-C546B5F31DE5")
And
WMAppManifest (PublisherID="{0745C81D-D1ED-49ED-A219-C546B5F31DE5})
I have then recompiled the app and uploaded and attempted to resubmit the update but I still get the error that the Publisher does not match. What have I missed??

This sounds tricky... perhaps you can do a search in the entire app for the GUIDs and replace them.
Also, you could build the appx package, rename the .appx to .zip, and open it up to see if you can find the wrong publisher id anywhere and it might give you a clue to where to make the change.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Ocs package does not match the current software components

Hi Experts,
In our SAP ERP 6.0 system few components like SAP APPL,EA APPL ,FinBasis were already upgraded to 603 SP04 long time back.
Now to install language,we need to upgrade all the components to EHP3.The pre requisite to upgrade to EHP3 as per note number 1095233 is SP08.Few of our components are at SP06 level and i downloaded the supported packages of all the components to upgrade to SP08 and then upgrade to EHP3.
When i try to display/define the component ECC-DIMp,i get the eror message message" ocs package does not match the current software componentu201D when trying to apply ECC-DIMPu201D .When i looked at the queue,the SPAM is looking for prerequisites of components EA APPL 600 and SAP APPL 600(This components are already upgraded to 603 level).
Please suggest me the option.
Thanks
satish

Hi,
For your problem, please check SAP note 1083533, please check extract from this note:
If you cannot integrate the required component Support Packages because the import conditions are not met (for example, because you have already installed SAP_APPL 603 although SAP_APPL 600 is the prerequisite), you must update the import conditions. When you try to install EHP3 packages using the EHP installer (EHPI), the following error occurs in SPDA_EHP_INCLUSION.LOG: "OCS package SAPKxxx does not match the current software component vector" Ths system displays the same error message when you try to install packages using transaction SAINT. Proceed as described in Note 1118803.
Solution is documented in the SAP note 1118803.
Thanks
Sunny

While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

storage-vdc(config-if)# show module
Mod Ports Module-Type                         Model              Status
2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
sw1-gd78(config-if)# sh module
Mod Ports Module-Type                         Model              Status
2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
Mod Sw              Hw      World-Wide-Name(s) (WWN)
2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
4    5.2(2)          0.107   --
7    5.2(2)          1.8     --
8    5.2(2)          1.8     --
10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
sw1-gd78(config-if)# sh run int ethernet4/6
!Command: show running-config interface Ethernet4/6
!Time: Mon Feb 20 22:56:12 2012
version 5.2(2)
interface Ethernet4/6
no shutdown
sw1-gd78(config-if)# no shut
sw1-gd78(config-if)# speed 1000
ERROR: Ethernet4/6: Configuration does not match the port capability.
sw1-gd72# sh int ethernet4/6 capabilities
Ethernet4/6
Model:                 DS-X9708-K9
Type (SFP capable):    10Gbase-SR
Speed:                 1000,10000
Duplex:                full
Trunk encap. type:     802.1Q
Channel:               yes
Broadcast suppression: percentage(0-100)
Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
Rate mode:             dedicated
QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
CoS rewrite:           yes
ToS rewrite:           yes
SPAN:                  yes
UDLD:                  yes
Link Debounce:         yes
Link Debounce Time:    yes
MDIX:                  no
Port Group Members:    none
TDR capable:           no
FabricPath capable:    yes
Port mode:             Switched
sw1-gd72# sh int ethernet4/6 transceiver details
Ethernet4/6
    transceiver is present
    type is 10Gbase-SR
    name is CISCO-FINISAR
    part number is FTLX8571D3BCL-CS
    revision is C
    serial number is FNS12090EMJ
    nominal bitrate is 10300 MBit/sec
    Link length supported for 50/125um OM2 fiber is 82 m
    Link length supported for 50/125um OM3 fiber is 300 m
    Link length supported for 62.5/125um fiber is 26 m
    cisco id is --
    cisco extended id number is 4
           SFP Detail Diagnostics Information (internal calibration)
                                     Alarms                  Warnings
                                High        Low         High          Low
Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
Tx Power       -2.65 dBm       1.49 dBm -11.30 dBm   -1.50 dBm     -7.30 dBm
Rx Power       -2.21 dBm       1.99 dBm -13.97 dBm   -1.00 dBm     -9.91 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning

Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

Sharepoint error - Search Issue - The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1).

i see this error everywhere - In ULS logs, on site. On the site > Site settings > search keywords; I see this -
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;} pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
I am facing issues in searching, my managed metadata service is not running, search results page throws internal error. Any Idea why this above error comes.
P.S: We use windows authentication in our environment.

Hi IMSunny,
It seems you have solved this issue based on your another post.
http://social.technet.microsoft.com/Forums/en-US/aa468ab0-1242-4ba8-97ea-1a3eb0c525c0/search-results-page-throws-internal-server-error?forum=sharepointgeneralprevious
Thanks
Daniel Yang
TechNet Community Support

Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

Hi all,
We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
the bindings as below in our .Net web application config file.
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
ObjectServicePortClient
serviceClient = new
ObjectServicePortClient(new
WSHttpBinding("ObjectServicePortBinding1"),
new
EndpointAddress(UriUtil.ObjectServiceUri));
if (serviceClient.Endpoint.Binding
is
WSHttpBinding)
   WSHttpBinding
wsBinding = serviceClient.Endpoint.Binding as
WSHttpBinding;
wsBinding.MessageEncoding =
"MTOM".Equals(transferMode) ?
WSMessageEncoding.Mtom :
WSMessageEncoding.Text;
serviceClient.Endpoint.Behaviors.Add(new
ServiceContextBehavior(Config.RepositoryName,
Config.DocumentumUserName,
Config.DocumentumPassword));
When we execute the above code, we are getting error message as below,
Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
Then, we changed the bindings as below
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="
Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
We are getting another error message,
Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
Any pointers on resolving this issue would be highly helpful.
Thanks

Hi Dhanasegaran,
As per your case, the corresponding details which may guide you to resolve this issue:
1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
Set this to true only during development to troubleshoot a service like below :
<serviceBehaviors>
<behavior name="metadataAndDebugEnabled">
    <serviceDebug
      includeExceptionDetailInFaults="true"
/>
    <serviceMetadata
      httpGetEnabled="true"
      httpGetUrl=""
/>
</behavior>
</serviceBehaviors>
3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
for more information, refer the following link :
https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

"The installed product does not match the installation source" error

Each time I attempt to use the SL disk to update the Apple drivers in Windows XP SP3 on my MacBook Pro 13" I get the error message posted in the title. I used this same disk successfully to update my MacPro. Anyone know what this means?
"The installed product does not match the installation source. Until a matching osurce is provided or the installed product and source are synchronized, this action can not be performed."

I get the same error, and I have an idea of what's going on.
When I try to install Boot Camp 3, Windows asks me to locate "BootCamp.msi". If I try to uninstall Boot Camp via "Add/Remove Programs", the same prompt comes up.
What I think is happening is that the original installer for Boot Camp 2.0 is being requested. But I have applied the Boot Camp 2.1 update, which has no BootCamp.msi file associated with it.
So I'm at a road block of sorts, unable to install Boot Camp 3.0. I cannot download the original Boot Camp 2.0 installer from Apple, only the 2.1 update. (I recently moved across the country and didn't bring my 10.5 media.)
Any ideas out there on what can be done to get Boot Camp 3.0 installed?
Message was edited by: Human Being

Server failed to start: The domain path does not match the running server

Hi,
I've configured Eclipse to run my local weblogic - which actually is working fine.
The server starts as intended and reaches state RUNNING.
As soon as this happens, OEPE tries to validate the server and compares the identified server's configuration to the expected configuration.
This finally results into the error message shown in the subject -- though server is still running.
!MESSAGE Server watcher[Oracle WebLogic Server 11gR1 PatchSet 1 at localhost]:The domain path does not match the running server.
Domain RootDirectory retrieved from the MBean of running server is: N:\Oracle\MIDDLE~1\USER_P~1\domains\MYWEBL~1\
Domain RootDirectory of this server: N:\Oracle\Middleware\user_projects\domains\myWeblogicServer
Obviously this seems to be an issue with the length of the directory and file names. The domain's configuration and all its start scripts do not have any 8+3 pathes, like USER_P~1 for user_projects. Nevertheless the MBean of the server returns such a "truncated" path which in turn is invalid for OEPE.
Fix: When setting up the domain in Eclipse, try using that 8+3 representation of the domain's location. Then the comparison will succeed...
My Question: Where do we need to ask for a fix in OEPE? The 8+3 path is still a valid one ...
Best Regards
Philipp

I haven't been able to reproduce this and 8+3 representation of the domain's location shouldn't be required.
Can you provide more information:
- is this a network drive?
- what is your OS: XP, Vista, Win7?
- what is the Windows file system type, is it FAT or NTFS
- Can you try install WLS on C:, e.g. C:\Oracle\Middleware\user_projects and see if it still happens?

The jar size value in the Application Descriptor does not match the real ja

Hi,
when i creat obfuscated package for my application It's posing the
Error preverifying class A
Class loading error: Wrong name
The jar size value in the Application Descriptor does not match the real jar file size.
It's perfectly working for all the other applications .I tried to change the jar size in the jad file but it's not working.

Yes, the obfuscator does not change the size value after finishing. You have to do it yourself.
Mihai

WCF returning "The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8)"

I have a WCF service I am trying to run on a new installation of 64-bit Windows Server 2008 IIS. Although it runs fine on Windows 2003 IIS, it is throwing the error in the thread title, which appears to be a server config issue, but I am not sure. Googling and searching the MSDN forums did not turn up a solution. I tried running WCF Logging, but that didn't help either.
Does anyone have any suggestions on how to solve this probelm?
Here is the error:
The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>500 - Internal server error.</title>
<style type="text/css">

I have the same issue on Windows 7 machine. The service works fine using a SoapUI client but a .Net client faisl to get a response.
Hi,
I have a WCF service which works perfectly when using SoapUI but throws error in my .Net client.
{"The content type text/html; charset=UTF-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
1024 bytes of the response were: '<HTML><HEAD><link rel=\"alternate\" type=\"text/xml\" href=\"http://xyz.mysite.com/ysa/Broker.svc?disco\"/><STYLE type=\"text/css\">#content{ FONT-SIZE: 0.7em;
PADDING-BOTTOM: 2em; MARGIN-LEFT: 30px}BODY{MARGIN-TOP: 0px; MARGIN-LEFT: 0px; COLOR: #000000; FONT-FAMILY: Verdana; BACKGROUND-COLOR: white}P{MARGIN-TOP: 0px; MARGIN-BOTTOM: 12px; COLOR: #000000; FONT-FAMILY: Verdana}PRE{BORDER-RIGHT: #f0f0e0 1px solid; PADDING-RIGHT:
5px; BORDER-TOP: #f0f0e0 1px solid; MARGIN-TOP: -5px; PADDING-LEFT: 5px; FONT-SIZE: 1.2em; PADDING-BOTTOM: 5px; BORDER-LEFT: #f0f0e0 1px solid; PADDING-TOP: 5px; BORDER-BOTTOM: #f0f0e0 1px solid; FONT-FAMILY: Courier New; BACKGROUND-COLOR: #e5e5cc}.heading1{MARGIN-TOP:
0px; PADDING-LEFT: 15px; FONT-WEIGHT: normal; FONT-SIZE: 26px; MARGIN-BOTTOM: 0px; PADDING-BOTTOM: 3px; MARGIN-LEFT: -30px; WIDTH: 100%; COLOR: #ffffff; PADDING-TOP: 10px; FONT-FAMILY: Tahoma; BACKGROUND-COLOR: #003366}.intro{MARGIN-LEFT: -15px}</STYLE><TITLE>Broker
Service</TITLE></HEAD><BODY><DIV id=\"content\"><P class=\"head'."}
I have the same service hosted on my local machine and when I point to the local service I can execute the operation with no issues. The message encoding is Soap11. I tried changing to Soap12 but I get exact same error. Any ideas greatly appreciated.
I do have windows Activation Features installed and I am using .Net Framework 4.
Thanks
Sofia Khatoon

The content type of the response message does not match the content type of the binding

I have written an ASP.Net web service which returns english,chinese and portuguese data. Everything seemed working fine until the method retunred only english data. The moment it returns english, chinese and portuguese data I get the error:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using
a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
'<!DOCTYPE html> <html>     <head>         <title>Runtime Error</title>
        <meta name="viewport" content="width=device-width" />         <style>          body {font-family:"Verdana";font-weight:normal;font-size:
.7em;color:black;}          p {font-family:"Verdana";font-weight:normal;color:black;margin- -5px}          b {font-family:"Verdana";font-weight:bold;color:black;margin-
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }          H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
}          pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt}          .marker {font-weight:
bold; color: black;text-decoration: none;}          .version {color: gray;}          .error {margin-bottom: 10px;}          .expandable
{ text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }          @media screen and (max-width: 639px) {           pre { width: 440px; o'.
It is not written using WCF ... any workarounds?!
Thank you.

Hi Raj Krish,
For ASP.NET related issue, please post to the following forum:
http://forums.asp.net/
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

AADSTS50011: The reply address does not match the reply addresses configured for the application

Can anyone tell me where to update the reply address?
I have AD synced from on-prem to Azure, then I setup a website on azurewebsites.net, then created a CNAME record from portal.mydomain.com to portal.azurewebsites.net. When I try to login using portal.mydomain.com I get:
AADSTS50011: The reply address does not match the reply addresses configured for the application.
Can anyone help? Thanks
Frank Russo

Hi Frank69,
Thanks for posting here!
It appears to me that the application is unable to find the URL you have configured on Azure or could be missing from the list. As a result the application is attempting to authenticate against AAD but failing to match the URl it wants.
I would suggest you to re-configure your AAD application on Azure and set one or more reply URLs.
Reference link:
http://www.matvelloso.com/2015/01/30/troubleshooting-common-azure-active-directory-errors/
Regards,
Sadiqh
Disclaimer: This response contains a reference to a third party World Wide Web site.
Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there.
There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

The control chart in the sampling method does not match the insp. char. Mes

The control chart in the sampling method does not match the insp. char.
Message no. QD240
how solve?????

You need to compare 'requirement for control chart' and 'control indicator of insp. characteristic'.
1. Requirement for control chart
QCC0 > Quality Planning > Basic Data > Sample, SPC > Statistical Process Control > Define Control Chart Type
See detail for your control chart and check 'requirement' in characteristic type screen area.
2. Control indicator of insp. characteristic
QS24
Check 'control indicator' is suitable for requirement.
Regards, Do Wook KIM

Eclipse error : The declared package does not match the expected package

Similar Messages

Maybe you are looking for