Eclipse give following error :could not find Java 2 runtime environment

When I try to start eclipse it is giving me following error could not find Java 2 runtime environment.It was working fine untill I installed a new verson of eclipse although I am not whethar that is the source of problem.
When i give java -version command in command prompt it shows
Registry key 'Software\JavaSoft\Java Runtime Environment\CurrentVersion'
has value '1.4', but '1.6' is required.
Error: could not find java.dll
Error: could not find Java 2 Runtime Environment.
My java Home ,classpath , and path are all set as I say it was earliar woking fine.
Please Help.

I know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value.

Similar Messages

Error:could not find Java 2 Runtime Environment

Greetings,i have a java problem with a game(football manager 2008) installation.I have a hp laptop with windows vista installed and when the installation is on 100%.It appears Error:could not find Java 2 Runtime Environment.I have taken some screenshots to help you understand my problem.
intallation:
http://img218.imageshack.us/img218/7945/egkatastashba2.jpg
the error:
http://img232.imageshack.us/img232/6388/errorty5.jpg
Also i tried to join a site which java is required and it appeard the following errors:
http://img87.imageshack.us/img87/6465/sfalmasp6.jpg
http://img87.imageshack.us/img87/9337/sfalma2sj1.jpg
PS:I have installed the java(Java(TM)6 Update 5).I hope to receive a reply with the solution of the problem as soon as possible.Thank you
Edited by: Cap.George on Mar 7, 2008 8:46 AM
Edited by: Cap.George on Mar 7, 2008 8:47 AM

Consider going to a Windows forum
(or better yet, to Microsoft's web site or to a local book store)
and learning about Vista's "User Account Control".
At least do a Google search on it.

Policytool give me error Could not find Policy File ....\.java.pol

hi master
error Could not find Policy File: C:\Documents and Settings\Administrator\.java.policy
Sir when I open policytool the system give me this error
And I use http://www.jensign.com/JavaScience/www/keystorereader/index.html this link
For Keystore, Policy and Security File Reader
that give me this message
------ Default Policy File and Keystore Status ------
java.home C:\PROGRA~1\Java\JRE15~1.0_1
C:\PROGRA~1\Java\JRE15~1.0_1\lib\security found.
user.home C:\Documents and Settings\Administrator
C:\Documents and Settings\Administrator\.java.policy NOT found.
C:\Documents and Settings\Administrator\.keystore NOT found.
How set user home and keystor please give me idea
thank
aamir

I know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value.

Create New gives an error "Could not find the user document directory"

Fresh installed Adobe Edge Animate CC (2014). When I try to Create New, I get an Error popup "Could not find the user document directory"

I think this worked!
I just downloaded an example file and tried opening from outside of the program. At first it gave me some errors but then loaded it up.
After that I've re-saved it and now I can create new files and open files.
Before that I also uninstalled old CC programs that were not showing in the Adobe Creative Cloud apps.

Error: Could not find DI API version 8.8 PL17 or higher.

Hello,
I'm trying to install the integration component to SAP B1 8.8 PL 14, and halfway through it's giving me the following error,
"Could not find DI API version 8.8 PL 17 or higher"
I was wondering, how do I find the Patch Level 17 for the DI API?
PS. I tried doing what it says in the installation guide, but it didn't help update me to the required version --> "To install the latest di api version, in the select components window of the sap b1 di api installshield wizard, deselect the di api previous versions checkbox"

Thanks Eddy,
I installed patch level SAP B1 PL18, and was able to get the version of DI API they were requesting. Now, when I'm in step 3/5 of the event sender, I get the following error when I click "test connection":
"Servlet B1iXcellerator is not available"
how do I go about correcting this?

Error: could not find source for resource bundle charts

I am trying to upgrade from Flex SDk 3.4 to 3.5.
I have copied the Data Visualisation SWCs under libs, locale and rlsls folders as suggested by adobe.
I get the following error when building the application
flex-library:
     [java] Loading configuration file /usr/local/lib/flex_sdk/3.5.0/frameworks/flex-config.xml
     [java] Error: could not find source for resource bundle charts.
     [java]
What am I missing? Any help is highly appreciated.
Thanks

Copying
/Software/FB\ Eclipse\ Plugin/Adobe\ Flex\ Builder\ 3\ Plug-in/sdks/2.0.1/frameworks/locale/en_US/charts_rb.swc into
the 3.5 SDK directory
/usr/local/lib/flex_sdk/3.5.0/frameworks/locale/en_US
solves the problem.
Not sure why as the charts_rb.swc comes from Flex 2.0

[ERROR] could not find source for resource bundle modules.

We are in the process of upgrading our flex application from SDK3.6 to SDK4.5.0.17899.
Flexmojos version used for compilation is 3.9.
The flex library project is complied with SDK4.5.0 version but BUILD is not getting SUCESS from maven.
The following is the reason is showing and unable to find out the root cause.
[ERROR] could not find source for resource bundle modules.
Can you please help me out.
Thanks,

Copying
/Software/FB\ Eclipse\ Plugin/Adobe\ Flex\ Builder\ 3\ Plug-in/sdks/2.0.1/frameworks/locale/en_US/charts_rb.swc into
the 3.5 SDK directory
/usr/local/lib/flex_sdk/3.5.0/frameworks/locale/en_US
solves the problem.
Not sure why as the charts_rb.swc comes from Flex 2.0

I'm getting an error "Could not find compiled resource bundle 'layout' for locale 'en_US'."

I thought I would update to the latest trunk version of the sdk. When I run my code I keep getting this Error being thrown:
"Error: Could not find compiled resource bundle 'layout' for locale 'en_US'."
It worked fine with the beta sdk and nightly builds from a long time before that. The error occured in builds 7573 and 7830, so what ever changed happened before then. I put a break point in there, and other resource bundles are being loaded ok.
My project uses RSLs and modules. I'm using Flash Builder beta.
I'm not familiar with resource bundles and not sure what to look for. Any ideas as to what to try or where to look?
Is there something I need to update to run the latest code?
Is the the appropriate place to post questions regarding the nightly builds? Or should I be asking somewhere else?
Thanks!
PS Here is the full stack trace if it gives anyone more ideas:
Error: Could not find compiled resource bundle 'layout' for locale 'en_US'.
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\trunk\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:339]
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\trunk\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:268]
    at mx.core::FlexModuleFactory/installCompiledResourceBundles()
    at mx.core::FlexModuleFactory/docFrameHandler()
    at flash.display::MovieClip/nextFrame()
    at mx.core::FlexModuleFactory/deferredNextFrame()
    at mx.core::FlexModuleFactory/update()
    at mx.core::FlexModuleFactory/moduleCompleteHandler()

hi
also add the following
to my compiler auguments:
-locale en_US    -source-path=locale/{locale}    -allow-source-path-overlap=true
and to actionScriptProperties I have the following where path= is the location of your locale folder
<compilerSourcePathEntry kind="1" linkType="1" path="/locale/{locale}"/>
Not sure if this is the correct way to do it, but it stopped me getting any errors.

Jar file error: could not find main class. program will exit

I have created a jar file using following command
jar cfm MyProj.jar Manifest.txt richa\*.class
and I have included main class header in the Manifest.txt. The executable jar file is created but when I double click on it, it prompts an error Could not find the main class. program will exit.
Please help. Its urgent..
Thanks in advance

This simply state that jvm was unable to fine Main Class file.
I hope you have configured manifest file including your main file information and class path used by the project with proper package hierarchy,
as described in article
[https://java.sun.com/docs/books/tutorial/deployment/jar|https://java.sun.com/docs/books/tutorial/deployment/jar]
Edited by: Deepesh on Jul 13, 2008 4:58 AM

Error: Could not find or load main class

Hello everyone!
I have decided to finally start learning Java and am currently, and slowly, making my way through the tutorials. I am only on chapter 2 in the class section. While reading I came uponJava Tutorials Sample Code and wanted to try and compile it in netbeans. This is the code that it contained:
class BicycleDemo {
    public static void main(String[] args) {
        // Create two different
        // Bicycle objects
        Bicycle bike1 = new Bicycle();
        Bicycle bike2 = new Bicycle();
        // Invoke methods on
        // those objects
        bike1.changeCadence(50);
        bike1.speedUp(10);
        bike1.changeGear(2);
        bike1.printStates();
        bike2.changeCadence(50);
        bike2.speedUp(10);
        bike2.changeGear(2);
        bike2.changeCadence(40);
        bike2.speedUp(10);
        bike2.changeGear(3);
        bike2.printStates();
I did the following in order:
1) New project
2) Select Java under Categories and Java Application under Projects
3) I type BicycleDemo in the Project Name Field and click finish
4) I delete all the template code and paste the above code into the field
5) I click run and get the following error:
run:
Error: Could not find or load main class bicycledemo.BicycleDemo
Java Result: 1
BUILD SUCCESSFUL (total time: 0 seconds)
Any help would be greatly appreciated! Thanks!

I have decided to finally start learning Java and am currently, and slowly, making my way through the tutorials. I am only on chapter 2 in the class section. While reading I came uponJava Tutorials Sample Codeand wanted to try and compile it in netbeans. This is the code that it contained:
class BicycleDemo {
1) New project
2) Select Java under Categories and Java Application under Projects
3) I type BicycleDemo in the Project Name Field and click finish
4) I delete all the template code and paste the above code into the field
5) I click run and get the following error:
run:
Error: Could not find or load main class bicycledemo.BicycleDemo
Java Result: 1
BUILD SUCCESSFUL (total time: 0 seconds)
Thanks for posting ALL of the info - most posters don't do that and it makes it hard to help them.
Your exception shows it is looking for 'bicycledemo.BicycleDemo' so the 'BicycleDemo' class is expected to be in a package named 'bicycledemo'. The code you posted and the code at the link does NOT use a package statement.
When you create a new project in NetBeans it will AUTOMATICALLY add a package name to the start of a new class file. So, unknown to you, it created a package named 'bicycledemo' and put the class file in it.
In step #4 you deleted the template code (which had a 'package bicycledemo' statement in it) and replaced it with the tutorial code.
Likely you didn't notice the package statement in the template before you deleted the template code.
package bicycledemo
.Add that package statement as the first line of the class source code.
You should generally ALWAYS put your code in a package. For some reasons many of the tutorials do NOT do that.

Idoc Error: Could not find code page for receiving system

hi,
I am facing the following error while processing Idocs.
ERROR: Could not find code page for receiving system
Diagnosis
For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

Hi,
I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
If this helps you really award me the points.
~Katty

Error: Could not find compiled resource bundle 'components' for locale 'en_US'

We are porting a fairly large body of Flex3 code developed under FlexBuilder 3 to Flex4 under FlashBuilder 4. Most of the conversion appears to be working fine, with one exception. When I launch the Flex4 version, all my data interchanges with the server works. Just as it is about to show the UI, the following error occurs:
     Error: Could not find compiled resource bundle 'components' for locale 'en_US'
I am actually using a locale of fr_FR, but I assume it couldn't find that, reverted to en_US, failed again and then barfed. If I look in
     ~Adobe Flash Builder 4\sdks\4.0.0\frameworks\locale\fr_FR
I see a lot of swc files, and of course no 'components.swc'. I believe the problem is that our Flex3 code is using mx components, and the compatibility mode is not properly handling it for some reason. I think this is mostly from our in-house UI library. The properties for that library (and for my main app I am testing now) have:
     - Use default SDK (currently "Flex 4.0")
     - Use Flex 3 compability mode
     - Use minimum version (Flash Player) required by the Flex SDK
     - Enable strict type checking
     - Enable warnings
I also tried putting the compatibility flag in the mxmlc compile line, with no change in behavior. This project is built by the following script:
ruby scripts/concat_properties.rb -o resources.properties ^
     src/main/flex/locale/fr_common/res_myname_fr_common.properties ^
     src/main/flex/locale/fr_common/scout/res_myname_scout_fr_common.properties ^
     src/main/flex/locale/fr_fr/res_myname_fr_fr.properties ^
     ../../scout/common/src/locale/fr_common/mypals/resources.properties
mxmlc -locale=fr_FR -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
copy src\main\resources\bundles\mypals\fr_fr_resources.swf ^
     bin-debug\bundles\mypals
What have I missed???

You have two posts. I will try to answer each completely. Second one first. You say I should change my build to include the framework resources. I am afraid I am not sure which and what to do there. We combine all our properties file into one large one, then use the following build line:
mxmlc -locale=fr_FR,en_US -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
I am assuming you are telling me to change the "-include-resource-bundles" line, but what to add? The "sdks\4.0.0\frameworks\locale\en_US" holds 13 swf files. I tried adding that entire folder (along with the fr_FR folder) to the project library path (in the project properties dialog), but that made no change. I also tried reverting the library path tab back to "MX Only" instead of "MX + Spark", but again no change.
====================
For your first message, I did a search for 'spark' in the entire project. It only existed on 3 lines, each at the start of css files:
    @namespace s "library://ns.adobe.com/flex/spark";
I had put those in based on reading needed changes to naming in CSS. Since I was not actually using any spark ('s') components yet, I removed these lines. The entire project now does not have the word 'spark' anywhere in it. No change in behavior (as I expected).
I did a search for "s:" throughout the project. That does exist in probably 100 places, but all are legitimate. Things like (xmlns:mx="http://www.adobe.com/2006/mxml") or variable names ("var matches:Object"). No reference to any s: object. (While on the topic, why does FlashBuilder still not have a "whole word" box to limit searches??).
Note that when I first reported this problem, the compiler was set to ONLY support fr_FR. In fighting this, I changed it to "en_US,fr_FR" hoping that would tell the compiler to load whatever en_US items it was looking for. We really do not want any English support in this version. (We do have another SWF created with only support for en_US, and another for en_UK, etc. Each language is a separate node on our server, so there is no need to mix & match at runtime)
The console shows a lot of swf loads that I do not understand...
The console output shows (my comments after ==> indicator)
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 2,229,992 bytes after decompression
             ==> our locale is set here, after the above load and before the next line
Look for name file at: ./data/fr_fr/names.csv
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 21,200 bytes after decompression
Loaded 2278 names.       ==> indicates successful load of data retrieved from server
Loaded 154 bad words     ==> our second data set has been retrieved and loaded
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 58,777 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 322,606 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\bundles\mypals\fr_fr_resources.swf - 595,025 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
    ==> not sure what this next warning means. I'm guessing I will later have to research it and return to 'secure' comm with server, but I'm ignoring for now
Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
Resource bundle loaded for locale fr_fr ==> at this point, we appear to have our French assets loaded successfully
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 1,303,976 bytes after decompression
[Unload SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf ==> some runs see this, but others do not. I expect it is a timing issue of whether it is reached or not before the crash
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 794,898 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 194,635 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 261,589 bytes after decompression
==> everything looks fine up to here. This is then when the third call to installCompiledResourceBundles occurs
Error: Could not find compiled resource bundle 'components' for locale 'en_US'.
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\4.0.0\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:340]
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\4.0.0\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:269]
    at mx.core::FlexModuleFactory/installCompiledResourceBundles()
    at mx.core::FlexModuleFactory/docFrameHandler()
    at mx.core::FlexModuleFactory/docFrameListener()

Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17: Error: Could not find a match for std::_Tuple_impl 0, unsigned&& ::_Tuple_impl(std::tuple unsigned&& , unsigned) needed in std::tuple unsigned&& ::tuple unsigned, void (unsigned&&).

I think I downloaded the latest Solaris Studio version. When I compile my code, I got the following error:
bash-3.00$ gmake -f Makefile.sun
CC -c -o metadata.o metadata.cpp -I. -I.. -g -O0 -std=c++11 -I/export/home/oracle/zhifan/boost_1_55_0 -I/export/home/oracle/zhifan/instantclient_11_2/sdk/include -V
CC: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
ccfe: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
"metadata.cpp", line 20: Warning: db hides databus::MetadataManager::db.
"metadata.cpp", line 26: Warning: db hides databus::MetadataManager::db.
Error: Could not find a match for std::_Tuple_impl<0, unsigned&&>::_Tuple_impl(std::tuple<unsigned&&>, unsigned) needed in std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: While instantiating "std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&)".
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: Instantiated from std::forward_as_tuple<unsigned>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/bits/stl_map.h", line 485:     Where: Instantiated from non-template code.
1 Error(s) and 2 Warning(s) detected.
gmake: *** [metadata.o] Error 2
with the same code, It can be compiled with g++ on Linux platform.
1 Is the issue same as 12.4 Beta, Error: Could not find a match for std::_Tuple_impl<0, std::string &&>::_Tuple_impl(std::tuple<std::string &&> ?
2 Do we have any workaround for this issue?
3 When will the final 12.4 release be available?

I can't say for sure whether your problem is fixed in the final release without a test case, but I'd say the chances are very good.
The final release will be announced soon. Watch this space, or the Oracle Solaris Studio page for an announcement.

Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key.

Dear Expert,
I setup SharePoint for 3 tiers, WFE, APP + DB Server.
I installed SQL 2014 reporting service Add-in on APP Server and already enable sql reporting service in DB Server. DB Server can do report server.
I follow the step : https://msdn.microsoft.com/en-us/library/jj219068(v=sql.120).aspx but I stuck in no.2, I cannot start the services, in picture below.
I checked the SSRS provision is disabled not online
Please help.

Hi MasterBird,
According to your description, when you register and start the Reporting Services SharePoint Service, the error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key is thrown out.
As this
article say, if you use three-computer deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the third computer
hosts an instance of the Database Engine.
Regarding the error message, it could cause by the Reporting Services – SharePoint feature and Reporting Services Add-in for SharePoint Products haven’t been installed. Please refer to articles:
SSRS SharePoint 2013 Create Service Application error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key Error
Installing SSRS 2012 in SharePoint Mode on SP2010
If issue persists, please check the error detailed information in ULS logs, and check Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log to see if any error occurred during set up. For more information, please refer to this article:
Troubleshoot a Reporting Services Installation.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Reportings Services in a 2-Tier Architecture / (Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key. )

Hello,
we want to install Reporting Services in a 2-Tier Architecture. The Servers are the following:
SERVER1: Windows Server 2012 and SQL Server 2012
SERVER2: SharePoint 2013 (WFE)
Reporting Server is installed on SERVER1 and running. On SERVER2 the registration of the service through Powershell was done but it does not start. An Error when starting the Service on the server occurs with the message:
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key."
I have found the following in msdn stating that a minimal of the same SharePoint Installation must exist on the Reporting Server. The article is for SQL Server 2008 R2 and SharePoint 2010. Is this the case also for SQL Server 2012 and SharePoint 2013 and
the root of the problem? http://msdn.microsoft.com/en-us/library/bb510781%28v=sql.105%29.aspx
If so does this mean that I require for the installation another License?!?!
Thank you in advance!

Hi,
According to your post, my understanding is that you wanted to install Reporting Services in a 2-Tier Architecture.
As the article
say, if you use Two-Computer Deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the Database Engine.
The steps to install in a two-tier environment are very similar to a standalone environment hence you can go to refer to the ' Install Reporting Services SharePoint Mode for SharePoint 2013' article at http://msdn.microsoft.com/en-us/library/jj219068(v=sql.110).aspx
To install in a two-tier environment, you can refer to:
How to setup, configure and test
SQL 2012 SP1 SSRS with SharePoint 2013 SP1
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Eclipse give following error :could not find Java 2 runtime environment

Similar Messages

Maybe you are looking for