Eclipse/netbeans IDE way too slow after 10.9 OS update
After updating to 10.9 eclipse and netbeans have become too slow. Netbeans takes around 10-15 mins to start, eclipse is better than that but is again too slow compared to what it was before upgrading to 10.9. Slowness is not only in startup but also in all of its operations.
I updated to 10.9.1 too, but I dont see any changes in the loading time for these IDEs, they are still too slow.
Have anyone faced this issue ? Any possible solutions ?
Thanks
No one else facing this issue ?
Similar Messages
-
My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
"Full Screen Mode" in Adobe Reader XI for Windows 8 loads way too slow!
I recently got a new laptop with Windows 8, after having used Windows Vista for years. I installed Adobe Reader XI for my new computer. Before, I used Adobe Reader X on Vista. I used Adobe Reader "Full Screen Mode" to read the nice-looking Bible chapters I created with internet audio from Biblegateway.com. In Vista, the "Full Screen Mode" appeared quickly, before the audio fully started, so I could see the text in time for the reading.
However, with Windows 8, "Full Screen Mode" takes around 5-10 seconds to appear at all, and a black screen is present throughout the wait. It does the same thing when I hit "escape" to exit "Full Screen Mode" as well. I even uninstalled Adobe Reader XI from my new laptop, and tried using Adobe Reader X, even though it is not recommened by Adobe to do that on Windows 8, in order to test the speed of "Full Screen Mode" there. Adobe Reader X had the same problem! I do not know if this can be fixed, but I am pretty unhappy about it! I enjoyed the "Full Screen Mode" with my PDF chapters and the online bible audio! Finding that function for the first time with Adobe Reader X was a delight for me! It gave the reading a theater feel!
Has anyone else here had a similiar problem with "Full Screen Mode" loading way too slow on Windows 8? I am very disappointed! If this cannot be fixed by a user, is there a place to complain to Adobe and make a recommendation for software improvement? Thank you!From: Test Screen Name [email protected]
Sent: Sunday, August 04, 2013 11:32 AM
To: gunner0490
Subject: I'm not able to open PDF files in Adobe Reader XI.
Re: I'm not able to open PDF files in Adobe Reader XI.
created by Test Screen Name <http://forums.adobe.com/people/TestScreenName> in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198 -
Why my Mac Pro 2009 became too slow after updated Yosemite?
Why my Mac Pro 2009 became too slow after updated Yosemite?
When the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
WIFI too slow after IOS 6 installed. SAFARI is loading very slow for burmese language websites. Not only that....many other websites too.....Please help.....Don't expect that ENglish is only language we expect to view on IPAD......
Most websites are responding very slow with safari & many other broswers opera.........Too annoying IOS 6...Give me IOS 5 back...Tell me how.....
I am too angry with IOS 6.......My IPAD 2 & IPHONE 4S all suck after installing IOS 6..........
I can't believe "$600 billions " company released without testing on every devices with different wifi routers, applications on their store.........
Give me some ways to downgrade to IOS 5.1.1......iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
New iMac running 10.10.1 frequently pauses, way too slow
I recently bought a 27 inch iMac, installed Yosemite, and migrated my files by time machine from a 5 year old macbook Pro running Snow Leopard. Since updating to 10.10.1, I frequently get the spinning beachball while I wait to continue, and everything seems much slower than it should. Safari downloads take forever, compared to Firefox. I ran an EtreCheck report pasted below. I tried some easy fixes like removing desktop clutter, reducing transparency, but that doesn't affect the overall slowness. Any solutions welcome!
Problem description:
Installed Yosemite on new iMac, migrating from snow leopard on an older macbook pro. Instead of being fast, processes frequently pause for bit while the beachball spins, then resume. Way too slow, much slower than my old macbook pro.
EtreCheck version: 2.0.11 (98)
Report generated November 24, 2014 at 5:06:30 PM EST
Hardware Information: ℹ️
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.2 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 755M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:7:57
Disk Information: ℹ️
APPLE HDD ST1000DM003 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (749.24 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Western Digital Ext HDD 1021 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Time Machine New (disk2s2) /Volumes/Time Machine New : 2.00 TB (193.57 GB free)
Seagate Expansion Desk 2 TB
S.M.A.R.T. Status: Verified
NewArchive (disk3s1) /Volumes/ NewArchive : 2.00 TB (11.39 GB free)
Western Digital Ext HDD 1021 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Bootable Backup New (disk1s2) /Volumes/Bootable Backup New : 500.10 GB (254.99 GB free)
Storage New (disk1s3) /Volumes/Storage New : 499.62 GB (480.72 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) Support
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) Support
[loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d13) Support
[not loaded] com.fklt.driver (1.8.0) Support
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) Support
[not loaded] com.novatelwireless.driver.3G (2.2.8) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
[not loaded] com.rogueamoeba.InstantOn (6.0.3 - SDK 10.6) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
/System/Library/Extensions/InstantOn.kext/Contents/PlugIns
[not loaded] com.rogueamoeba.InstantOnCore (6.0.3 - SDK 10.6) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
/Volumes/Bootable Backup New/Applications/ CD burn & label ƒ/Toast 8.0.5 Titanium ƒ/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (1.7) Support
/Volumes/Bootable Backup New/Applications/ Multimedia ƒ/TuneClone ƒ/TuneClone.app
[not loaded] com.tuneclone.driver.TuneClone_Virtual_CDWriter (1.0.0d1) Support
/Volumes/Bootable Backup New/Applications/ My Utilities ƒ/Little Snitch 2.2 ƒ/Little Snitch Installer.app
[not loaded] at.obdev.nke.LittleSnitch (2.2.05) Support
/Volumes/Bootable Backup New/Applications/Cloak.app
[not loaded] com.bourgeoisbits.cloak.tun (1.0.1) Support
/Volumes/Bootable Backup New/Applications/Utilities/DiskWarrior ƒ/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.2) Support
Startup Items: ℹ️
NoteburnerService: Path: /System/Library/StartupItems/NoteburnerService
M-Audio FireWire Audio Helper: Path: /Library/StartupItems/M-Audio FireWire Audio Helper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[loaded] com.avira.antivirus.general.agent.plist Support
[loaded] com.avira.antivirus.ipm.ui.plist Support
[failed] com.avira.antivirus.notifications.agent.plist Support
[loaded] com.avira.antivirus.odscan.default.plist Support
[loaded] com.avira.antivirus.scheduler.agent.plist Support
[running] com.avira.antivirus.systray.plist Support
[loaded] com.avira.antivirus.telemetry.agent.plist Support
[loaded] com.avira.antivirus.update.default.plist Support
[running] com.flipvideo.FlipShare.AutoRun.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[loaded] com.smithmicro.cleaning.quickbackupcheck.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.atomicbird.macaroni.launchd.plist Support
[failed] com.avira.antivirus.dbcleaner.plist Support
[loaded] com.avira.antivirus.ipm.loader.plist Support
[running] com.avira.helper.watchdox.plist Support
[loaded] com.barebones.bbedit.plist Support
[loaded] com.bombich.ccc.plist Support
[invalid?] com.bombich.ccc.scheduledtask.EE7EE552-88D4-41A7-BB96-B7F2F891EA0D.plist Support
[running] com.bombich.ccchelper.plist Support
[running] com.flipvideo.FlipShareServer.launchd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.m-audio.firewire.helper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sibelius.sari.plist Support
[invalid?] com.sierrawireless.SierraReset.plist Support
[running] com.sierrawireless.SWoCMon.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.bombich.ccc-user-agent.plist Support
[running] com.c-command.SpamSieve.LaunchAgent.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.spotify.webhelper.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
GrowlMenu Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlMenu.app)
Dropbox Application (/Applications/Dropbox ƒ/Dropbox.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Scorch: Version: (null) - SDK 10.2 Support
SpeedDownload Browser Plugin: Version: 2.1.5 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Myriad Music Plugin: Version: 5.6.2 Support
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.5.0r596 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
DivXBrowserPlugin: Version: 2.1 Support
CouponPrinter-FireFox: Version: Version 1.1.5
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
OVSHelper: Version: 1.1 Support
Google Earth Web Plug-in: Version: 7.1 Support
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
OfficeLiveBrowserPlugin: Version: 12.2.7 Support
Safari Extensions: ℹ️
Videobox
DivX Plus Web Player HTML5 <video>
PriceBlink-1
Speed Download
Add To Amazon Wish List
Exposer
Discount Search for Amazon
StumbleUpon
WOT-1
1Password
YouTube Downloader
Rotten Tomatoes
Compass
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 Support
A Better Finder Preferences Support
RCDefaultApp
DivX Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
PreferencesPane Support
Macaroni Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 250.11 GB
Destinations:
Time Machine New [Local]
Total size: 2.00 TB
Total number of backups: 33
Oldest backup: 2014-11-13 07:38:50 +0000
Last backup: 2014-11-24 21:19:47 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 250.11 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% avlogwriter
1% loginwindow
1% avguard-ondemand-mgmt
0% fontd
Top Processes by Memory: ℹ️
601 MB savapi
352 MB mds_stores
309 MB avguard.bin
301 MB loginwindow
206 MB Mail
Virtual Memory Information: ℹ️
2.80 GB Free RAM
3.83 GB Active RAM
978 MB Inactive RAM
974 MB Wired RAM
5.87 GB Page-ins
0 B Page-outsStart time: 10:22:44 01/10/15
Model Identifier: iMac11,1
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 20:24
SATA
Hitachi HDS722020ALA330
USB
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
hp LaserJet 3380 (Hewlett Packard)
Officejet Pro 8600 (Hewlett Packard)
Diagnostic reports
2014-12-19 DashlaneAgent crash
2014-12-21 QuickLookSatellite crash
2014-12-22 DashlaneAgent crash
2014-12-27 DashlaneAgent crash
2014-12-28 HelpViewer crash
2014-12-30 DashlaneAgent crash
2015-01-05 Microsoft Word hang
Log
Jan 10 10:19:18 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:28 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:38 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:48 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Memory: kernel_task (UID 0) is using 1332 MB
kexts
com.seagate.driver.PowSecDriverCore (5.2.6)
com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6)
com.vmware.kext.vmci (90.5.7)
com.vmware.kext.vsockets (90.5.7)
com.vmware.kext.vmnet (0188.79.83)
com.vmware.kext.vmx86 (0188.79.83)
com.vmware.kext.vmioplug.12.1.17 (12.1.17)
Daemons
com.carbonite.daemon
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.oracle.java.Helper-Tool
com.apple.aelwriter
com.adobe.fpsaud
com.bombich.ccchelper
com.seagate.TBDecorator.plist
com.bombich.ccc
Agents
com.sony.PMBPortable.AutoRun
com.bombich.ccc-user-agent
com.google.Chrome.framework.service_process/Users/USER/Library/Application_Supp ort/Google/Chrome
com.leadertech.PowerRegister.SEA1.UUID
com.adobe.AdobeCreativeCloud
com.carbonite.carbonitestatus
com.adobe.PDApp.AAMUpdatesNotifier.96592.UUID
com.apple.MassStorageCamera.315272.UUID
com.adobe.ARM.UUID
com.bombich.cccuseragent
com.seagate.dashboard
com.adobe.CS5ServiceManager
com.oracle.java.Java-Updater
com.citrixonline.GoToMeeting.G2MUpdate
com.adobe.ARM.UUID
com.google.keystone.user.agent
com.apple.AirPortBaseStationAgent
com.hp.scanModule3.64216.UUID
com.carbonite.carbonitealerts
Startup items
/Library/StartupItems/HP IO/HP IO
/Library/StartupItems/HP IO/StartupParameters.plist
/Library/StartupItems/HP USB EWS Gateway/HP USB EWS Gateway
/Library/StartupItems/HP USB EWS Gateway/StartupParameters.plist
/Library/StartupItems/HPlaserjet Trap Monitor/HPlaserjet Trap Monitor
/Library/StartupItems/HPlaserjet Trap Monitor/StartupParameters.plist
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
Bundles
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/MicrosoftMouse.kext
- com.microsoft.driver.MicrosoftMouse
/System/Library/Extensions/Seagate Storage Driver.kext
- com.seagate.driver.PowSecDriverCore
/Library/Extensions/VBoxDrv.kext
- org.virtualbox.kext.VBoxDrv
/Library/Extensions/VBoxNetAdp.kext
- org.virtualbox.kext.VBoxNetAdp
/Library/Extensions/VBoxNetFlt.kext
- org.virtualbox.kext.VBoxNetFlt
/Library/Extensions/VBoxUSB.kext
- org.virtualbox.kext.VBoxUSB
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/AdobeExManDetect.plugin
- com.AdobeExManDetectLib.AdobeExManDetect
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
- com.adobe.acrobat.pdfviewer
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
- com.adobe.acrobat.pdfviewerNPAPI
/Library/Internet Plug-Ins/EPPEX Plugin.plugin
- N/A
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/PreferencePanes/Carbonite.prefPane
- com.carbonite.prefpanel
/Library/PreferencePanes/DashboardPreferences.prefPane
- com.seagate.dashboard.preferences
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/Growl.prefPane
- com.growl.prefpanel
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/Microsoft Mouse.prefPane
- com.microsoft.microsoftmouse
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Caches/com.apple.Safari/Extensions/Dashlane-2.safariextension
- com.dashlane.dashlanesafari
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Dashlane.plugin
- com.DashlaneLib.Dashlane
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Widgets/HP Ink Widget.wdgt
- com.hp.widget.inkwidget
Apps
/Volumes/iMac27 Desktop Clone/Applications/Google Drive.app
/Volumes/iMac27 Desktop Clone/Applications/Google Drive 2.app
/Applications/Google Drive.app
/Applications/Google Drive 2.app
Contents of /System/Library/LaunchDaemons/com.seagate.TBDecorator.plist (checksum 3070240373)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<!--
com.seagate.TBDecorator.plist
SeagateDiagnostics
Created by John Brisbin on 3/10/10.
Copyright 2010 Seagate Technologies LLC.. All rights reserved.
-->
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.seagate.TBDecorator.plist</string>
<key>RunAtLoad</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Seagate/TBLoopDriveParams</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitealerts.plist (checksum 3096452879)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitealerts</string>
<key>OnDemand</key>
<true/>
<key>RunAtLoad</key>
<false/>
<key>WatchPaths</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/Resources/</string>
</array>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/MacOS/CarboniteAlerts</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitestatus.plist (checksum 2411194237)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitestatus</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteStatus.app/Contents/MacOS/CarboniteStatus</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 1821332316)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>16</integer>
<key>Minute</key>
<integer>33</integer>
<key>Weekday</key>
<integer>4</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.sony.PMBPortable.AutoRun.plist (checksum 2288250257)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.sony.PMBPortable.AutoRun</string>
<key>OnDemand</key>
<true/>
<key>Program</key>
<string>/Library/Application Support/Sony/PMBPortableAutoRun.app/Contents/MacOS/PMBPortableAutoRun</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist (checksum 2593636600)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.teamviewer</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS/TeamViewer</string>
<string>-RunAsAgent</string>
<string>YES</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS</string>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist (checksum 2362964135)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.desktop</string>
<key>LimitLoadToSessionType</key>
<array>
<string>LoginWindow</string>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Desktop</string>
<string>-RunAsAgent</string>
<string>YES</string>
<string>-Module</string>
<string>Full</string>
</array>
...and 6 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.plist (checksum 3730953884)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.bombich.ccc</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1847580806)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Media Disk" to "Music". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 229 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1637450734)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Pictures" to "Pictures Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 207 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1138618051)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Aperture Library" to "Aperture Library Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 233 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 3444763627)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "MacHD" to "iMac27 Desktop Clone". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be permanently deleted.
• Files on the destination will be updated if the size or modification date differs.
• Older versions of updated files will not be archived.
</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 209 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 495358405)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>Program</key>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.carbonite.launchd.carbonitedaemon.plist (checksum 2948711974)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.carbonite.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
<key>WorkingDirectory</key>
<string>/Library/Application Support/Carbonite</string>
<key>StandardOutPath</key>
<string>/Library/Logs/Carbonite1.log</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/Carbonite2.log</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist (checksum 13465011)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.service</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Service</string>
<string>-Module</string>
<string>Full</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 578238223)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 926752576)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.bombich.ccc-user-agent.plist (checksum 1605626007)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc-user-agent</string>
<key>Program</key>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/CCC User Agent.app/Contents/MacOS/CCC User Agent</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.google.Chrome.framework.plist (checksum 2813695882)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>Label</key>
<string>com.google.Chrome.framework.service_process/Users/USER/Library/Applicat ion_Support/Google/Chrome</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Program</key>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<string>--type=service</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>Sockets</key>
<dict>
<key>ServiceProcessSocket</key>
...and 7 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 4195197102)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.leadertech.PowerRegister.SEA1.UUID.plist (checksum 2799483814)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.leadertech.PowerRegister.SEA1.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/Resources/Seagate.app/Contents/Resources/SeagateRegRemin der.app/Contents/MacOS/SeagateRegReminder</string>
</array>
<key>StartInterval</key>
<integer>3600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.seagate.dashboard.plist (checksum 1981328959)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.seagate.dashboard</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/MacOS/Seagate Dashboard</string>
<string>-runMode</string>
<string>autoLaunched</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist (checksum 3654809970)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>org.virtualbox.vboxwebsvc</string>
<key>Program</key>
<string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
<key>Sockets</key>
<dict>
<key>Listeners</key>
<dict>
<key>SockServiceName</key>
<string>18083</string>
<key>SockType</key>
<string>stream</string>
<key>SockFamily</key>
<string>IPv4</string>
</dict>
</dict>
</dict>
...and 1 more line(s)
Global login items
/Applications/HP LaserJet Software/HP Setup Assistant.app
/Library/Application Support/hp/laserjet/Trap Monitor/HPEventHandler.app
Firewall: On
DNS: 216.40.77.126
Listeners
cupsd: ipp
kdc: kerberos
launchd: afpovertcp
launchd: microsoft-ds
User login items
iTunesHelper
- /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
VMware Fusion Start Menu
- /Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app
Google Drive
- /Applications/Google Drive.app
Canon IJ Network Scanner Selector2
- /Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app
Android File Transfer Agent
- /Users/USER/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app
AdobeResourceSynchronizer
- /Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app
Eye-Fi Helper
- /Applications/Eye-Fi/Eye-Fi Helper.app
Google Chrome
- /Applications/Google Chrome.app
Launch Nikon Message Center 2
- /Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app
Safari extensions
Dashlane
Restricted files: 513
Lockfiles: 4
High file counts
Desktop: 125
Elapsed time (s): 584 -
Ios 8.0.2 way too slow on 16GB 4S
I updated from ios 7 two days ago and my 16GB 4S is WAY too slow. It is really noticeable in Mail and Safari, the two programs I use the most. I am really mad and discouraged at the lack of warning and the rather large (negative) impact it has made on my online life as I use my iPhone a lot both for work and pleasure. I did improve entering text in Mail by turning off the function that suggests a string of words as one types; at least I can type without stuttering delays...
Does anyone know if Apple recognizes this as a big problem and is working to provide an update for the type of iPhone and memory combo I and millions of others have?
As an (annoying) aside, I found the updating process to be very frustrating: I used iTunes - as presumably very few of us have 5GB free - but found the online documentation about matters like transferring purchased apps before starting the upgrade not to match the iTunes screens; plus I had to use Task Manager a number of times to shut down a stuck iTunes. Inexcusable for Apple not to have made this easy.Hello ralphensandra,
Thanks for the question. If I understand correctly, you can't update the iOS. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
If you can't update or restore your iPhone, iPad, or iPod touch
Resolve iOS update and restore errors in iTunes
Thanks for using Apple Support Communities.
Cheers,
Mario -
What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?
All you need is an Ethernet cable.
Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately. -
TP Yoga 15 - Windows: Keyboard response too slow after coming back from hibernation
I've got the same issue as outlined in this thread for a Y50 - there seems to be a BIOS update to solve it, but what about TP Yoga 15? Quote:Simply put, In keyboard properties , the Repeat delay is default at maximum (eg, holding down a keyboard button and how fast it generates the key strokes). When the system is put in hiberanation, then turned on again to come back, the Repeat delay some how gets decreased to about 2/3 of what it originally is. https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Re-Y50-Windows-8-Keyboard-response-too-slow-after-coming-back/td-p/1676309/page/1
hi guys,
Can you please provide also these additional information:
(this is to check if the issue is isolated to a certain model number)
Model Number (eg. 59-xxxxxx):
Place of Purchase (eg. Amazon, Bestbuy, etc.):
In addition, the solution from this thread seems to be a good workaround (the app is for Win7 but may also work for Win8.1)
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I allowed Apple updates about two weeks ago and now Safari is way too slow. I have tried using Airport and Ethernet and the problem is the same. Yesterday, I upgraded to Safari 5.1 and now the problem is worse. Any solutions?
I can't stand peremptory affirmations like "Nothing is wrong with Safari".
Thousands of users can't be wrong (see the discussions).
If I read you the right way, it's never software' fault, it's the user who's the culprit.
Amazing!
In this very case, the fact is we can't give to "christinefromfonthill" a good solution because weren't sitting in front of her Mac.
You give her a good advice which could, perhaps, lead to an improvement.
But must also admit that Safari is a very slow browser compared to Firefox or Chrome.
And you can't ignore all the problems which arose when upgrading to Lion and were related to the new build and specs of Safari 5.1.
The best example is the apparition of "garbage type" (use of Last Resort font) when reading numerous sites. This never occured before and is the direct consequence of Safari compliance to Web Open Type. This standard prohibits the use of Type 1 Postscript Fonts and is the reason why so many people are in trouble.
I use a Mac for more than 25 years.
I am a very "clean" user who hates the bells and whistles of third party.
My Mac is always up-to-date and despite all my Mac loving care, I run into some problems.
Imagine the nightmare which can occurs for the vulgum pecus who isn't, by definition, a power user aware of all the requirements for running a System in optimal conditions.
May be Safari is one step in advance on its time but lambda users are paying the price for it. -
Ipod touch 4th generation became too slow after ios 6. How can I rollback to iOS 5 or what else can be done. I already did master reset and restored to factory default but no improvement.
You cannot downgrade
-
My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd.
My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
Thanks in adavnce for help.Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
"Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update. -
I'm using iPhone 4S and it was working fast once I purchased and after few months I update my phone since to 7.0.1 since then neither my wifi is working nor my Bluetooth and even my phone is working slow, after than many new updates came I did but nothing works. Kindly help me out how to solve this problem.
Hi Sameer alamgir!
Here are two articles that can help you troubleshoot these issues with your Wi-Fi and Bluetooth connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
Too slow after Yosemite upgrade [info]
Hello fellows,
Right After upgrading to Yosemite I started facing an extremely delay almost in everything which I did not face at all before upgrading where they were times that I could use at the same time Chrome, Adobe Photoshop, Word, VMware Machine (Windows7) with insignificant delays:
On booting a white loading bar appears which takes too long before it loads OSX.
Almost in every action I take, I see the beachball spinning for too long.
Sometimes (most of the times) even typing delays a bit and the mouse buttons actions have a remarkable to extreme delay. (No battery or bluetooth problems)
I tried to take some actions like these ones: http://www.hightechdad.com/2014/10/23/13-tips-optimize-mac-yosemite-installation %20/ & http://osxdaily.com/2014/10/24/speed-up-os-x-yosemite-mac/
I used CleanMyMac 2
The general feeling is like having a machine of 90's trying to run an OS designed in 10's.
More or less my daily usage of applications includes Chrome, Safari, Skype & Microsoft Office. Nothing too heavy most of the time.
I include EtreCheck report in case it might help:
Problem description:
Everything goes slower after upgrading to Yosemite. Also at booting it shows a white loading bar which needs too much time before it initiates OSX.
EtreCheck version: 2.0.11 (98)
Report generated Δευτέρα3 Νοεμβρίου 2014 - 14:13:49 μ.μ. EET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2013) (Verified)
iMac - model: iMac14,1
1 2.7 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel Iris Pro -
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2:46:13
Disk Information: ℹ️
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (170.67 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Trust Webcam Trust Webcam
Logitech USB Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 69
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 23046.917896) Support
[not loaded] com.parallels.kext.hypervisor (9.0 23046.917896) Support
[not loaded] com.parallels.kext.netbridge (9.0 23046.917896) Support
[not loaded] com.parallels.kext.usbconnect (9.0 23046.917896) Support
[not loaded] com.parallels.kext.vnic (9.0 23046.917896) Support
/System/Library/Extensions
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) Support
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) Support
[not loaded] com.ZG.driver.ZGUSBCDCACMData (1.0) Support
[not loaded] com.ZG.driver.ZGUSBMassStorageFilter (1.0) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.29) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.29) Support
[loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
[not loaded] com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) Support
[not loaded] com.novatelwireless.driver.3G (3.0.13) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.13) Support
[not loaded] com.option.driver.Option72 (2.15.0) Support
[not loaded] com.option.driver.OptionHS (3.26.0) Support
[not loaded] com.option.driver.OptionMSD (1.21.0) Support
[not loaded] com.option.driver.OptionQC (1.11.0) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
[not loaded] com.visicom.ManyCam.VideoDevice.driver (3.0.8 - SDK 10.7) Support
[not loaded] com.vodafone.driver (3.0.9) Support
[not loaded] com.zg.driver.cdc_ecm_qmi (1.0) Support
[not loaded] com.zg.driver.cdc_usb_bus (1.0) Support
[not loaded] com.zte.driver.cdc_ecm_qmi (1.0.19) Support
[not loaded] com.zte.driver.cdc_usb_bus (1.0.19) Support
[not loaded] de.novamedia.driver.NMSamsung (0.0.2) Support
[not loaded] de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
[not loaded] de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
/System/Library/Extensions/ManyCamVideoDeviceDriver.kext/Contents/PlugIns
[not loaded] com.visicom.ManyCam.VideoDevice.userclient (3.0.8 - SDK 10.7) Support
/System/Library/Extensions/NMHuaweiPhonesVTPCDC_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
/System/Library/Extensions/NMSamsungDriver_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (3.0.13) Support
/System/Library/Extensions/Vodafone.kext/Contents/PlugIns
[not loaded] com.vodafone.driver.Data (3.0.9) Support
Problem System Launch Agents: ℹ️
[loaded] com.paragon.NTFS.trial.plist Support
[loaded] com.paragon.NTFS.upd.plist Support
Problem System Launch Daemons: ℹ️
[running] de.novamedia.nmnetmgrd.plist Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.logmein.logmeingui.plist Support
[not loaded] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.teamviewer.teamviewer.plist Support
[running] com.teamviewer.teamviewer_desktop.plist Support
[running] de.novamedia.VodafoneDeviceObserver.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[not loaded] com.logmein.logmeinserver.plist Support
[invalid?] com.logmein.raupdate.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.teamviewer.Helper.plist Support
[running] com.teamviewer.teamviewer_service.plist Support
[invalid?] com.visicom.ManyCam.VideoDevice.daemon.plist Support
[loaded] ZendScriptcase71.plist Support
[loaded] ZendScriptcase8.plist Support
User Launch Agents: ℹ️
[running] com.akamai.single-user-client.plist Support
[loaded] com.BlueStacks.AppPlayer.LogRotator.plist Support
[loaded] com.BlueStacks.AppPlayer.Service.plist Support
[loaded] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
[loaded] com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items: ℹ️
uHD-Agent Application (/Applications/BlueStacks.app/Contents/Runtime/uHD-Agent.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive ApplicationHidden (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
FlashPlayer-10.6: Version: 11.9.900.117 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 11.9.900.117 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
LogMeIn: Version: 1.0.961 - SDK 10.7 Support
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.961 - SDK 10.7 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User Internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
Picasa: Version: 1.0 - SDK 10.4 Support
Safari Extensions: ℹ️
OpenIE
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Paragon NTFS for Mac ® OS X Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
8% Google Chrome
7% JavaApplicationStub
3% WindowServer
0% fontd
0% SystemUIServer
Top Processes by Memory: ℹ️
301 MB JavaApplicationStub
266 MB Google Chrome
155 MB Safari
155 MB Google Chrome Helper
120 MB Microsoft Word
Virtual Memory Information: ℹ️
1.30 GB Free RAM
3.79 GB Active RAM
2.51 GB Inactive RAM
982 MB Wired RAM
8.00 GB Page-ins
66 KB Page-outsArthur thank you for your response.
I strongly doubt that CleanMyMac 2 did something bad since I installed it only for this reason and that was today after a week of upgrade, I never had it or knew it before. Also could not do much since I had the demo edition.
I had the same background processes before upgrading (most of them I need them, except -occasionaly - Flip4mac,Paragon,Akamai)
Either way there was nothing new installed after upgrading that might caused the issues, so I will wait for other suggestions before doing something more dramatic like reinstalling the OSX from beginning. -
Response message became too slow, after transported to Consolidation Sys!
Hi guys,
I have a sync interface with BPM who calls an HTTP service.
In development system things work fine and the interface is really fast. It gets a response from HTTP service in a few seconds (also with big messages, over 2 mega bytes). After transported to the consolidation system, the response message became too slow and after 600sec it gets a timeout.
No parameters on Integration Server and RZ10 were changed
Anyone knows whats happening or have an idea?
Thanks in advance,
Ricardo.
Message was edited by: Ricardo QuintinoHi Udo,
What do you mean "the channels are not transported 1:1"?
One thing, the difference between Development XI and Consolidation XI is that Consolidation is in Cluster.
I need to do some extra configurations for HTTP in Cluster systems?
Thanks in advance.
Regards,
Ricardo.
Message was edited by: Ricardo Quintino
Maybe you are looking for
-
Mapping condition in multi mapping
Hi Experts, I have a 1:n multimapping where I have a mapping condition such that If the field is empty ith should throw an error. At the same time the n-1 records should be processed... The UDF i have used is if (a == "") throw new RuntimeException()
-
Importing 3D Models - problem with .3ds
I am able to import several .obj models, but I am having trouble importing any .3ds models. It lets me select them in the dialog, but then nothing shows up. Nothing is freezing or crashing - just nothing happens? I am attaching what my import options
-
Call stored procedure(with parameters) via odbc
In my application I like to use the below statement to call a stored procedure with parameter and return a result set. {CALL PP.getPerson('daniel')} but this will just return errors to my application. If I change the statement to: {CALL PP.getPerson(
-
Free trial - does it exist as trying to use but keeps asking me to pay
i have a free trail subscription, am logged in but every time I try to create a PDF or export a PDF takes me to a page that asks me to pay for a subscription
-
Transaction code MEMASSSA in ECC6.0
I'm using t-code MEMASSSA to mass change schedule agreement in ECC6.0 the message is "document #: Changes have been saved" and the light is green when I did execute the mass change. But the change was not successful when i review it in ME33L -nothin