Eclipse- "No Tab group defined for launch application type/n

I was developing nicely on Web Sphere Studio Developer Version=5.1.0 (with eclipse Release 2.1.1) but I just started getting the error "No Tab group defined for launch application type/n org.eclipse.jdt.launching.localJavaApplication" when trying to run or debug. I was trying to parse&validate an XML file and getting a log of the Parsing errors.This might have done something. However, it was working before..Any ideas before deleting and reloading Eclipse?
Cigdem Savaseri-Brackmann

Hi Jin,
I'm having the same problem ... how you solved?
Thanks!

Similar Messages

  • Error: "No tab group defined for launch configuration type "

    Hi,
    When i try to run my application its showing an error,
    <b>No tab group defined for launch configuration type com.sap.ide.webdynpro.projectbrowser.launch.configtype</b>
    but when i run my application by rightclicking  on my application its working, instead if i use the tab on the upper panel of NWDS it throwing this error.
    how to rectify it?
    Thanks,
    Suresh

    Hi,
    Following is what I assume you are trying to do.
    1. You have a WebDynpro application which you want to deploy and run.
    2. You are able to run your WebDynpro application by rightclicking on the application and running it.
    3. You are not able to run the same application by clicking RUN option on the top.
    If my assumption is correct, then I suggest you to follow your second approach.
    If not, then please specify what kind of application you are trying to execute.
    Ashutosh

  • Authorizations for 'Launch Application..'

    Can somebody guide me in finding the Authorization for the 'Launch Application...' in the Tool bar?
    Thank
    Franz

    Hi Franz,
    The authorization under General -> Layout to PDF will apply for Launch Application as well.
    Regards,
    Vijay kumar
    SAP Business One Forums Team

  • Problem Instanciating BO - No default attribute defined for the object type

    Hello Experts,
    I am instanciating the BO BUS2038 to ZBUS2038 and when I click in u201Cto implementedu201D and follow u201Cto releasedu201D the message No default attribute defined for the object type is appearing!
    Can anybody help, please?

    Hello everyone,
    it appears to me, that no one has a clue about the "default attribute" and is widely guessing what can be done about that.
    I feel deeply sorry for that, Marcos.
    At first: You don't really need to care about the missing default attribute. If it's missing, the object's instance key will be used instead. Skip the warning message.
    Secondly: The default attribute is used to display the instance within the "Object links & Attachments" under the work item preview when using the SAP Business Workflow.
    Thirdly: You can select any existing attribute of your business object type to be the default attribute, by navigating to the "Basic data" (it's the heat-icon within the object builder), use tab "Defaults" and use the Input Help on the field "Attribute".
    There you'll go.
    Best wishes,
    Florin

  • Class type not defined for this object type

    Hi Friends,
    Could u please guide me ?..We have a requirement to extract some data from classification system.
    This is related with class type 023 - Batch
    I want to use the following parameters in CTBW.
    basis datasource :Z_BATCH_ATTR
    class type : 023
    object table :MCHA
    Datasource type : ATTR
    I am getting an error "Class type not defined for this object type" when i enter the above entries in CTBW.
    The only way I'm being able to make this work is changing object table from MCHA to MCH1.
    This solution does not fit me bacause MCH1 table dont have Plant as Key, and I need it.
    Do you know what should I do to solve this?
    Thanks in advance

    Hi,
    I believe we have to use the list of standard "Basis DataSource", as I'm also stuck with the same issue. Let me know what Basis Data source you selected in this case.
    As I'm trying to extract Batch attributes from "AUSP" Table.
    I have given class type= 023
    Obj Table= AUSP
    But not sure which "basis datasource" I need to select.
    Thanks,
    Satish

  • Each new beta seems to wipe out the tab groups defined in previous versions. Why?

    Why does each version of the Firefox v.10 beta wipe out the previous beta's tab groups? Is there a way to recover them? I've had to stop using the groups feature lest I lose the tabs not included in the primary group.

    -> [[Session Restore]]
    Check and tell if its working.
    Not related to your problem but some of your Firefox Plugins are out-dated
    * Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
    * '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

  • Re:No Special GL are defined for A/c.Type K

    Dear Experts,
    Good Morning to you,
    I have a issue can anybody solve me please.
    Issue: Cannot make deposit payment due to error message : NO Special GL are defined for account type K special GL indicator A for reconciliation account:12345.
    So friend pls guide how to close this issue.
    Awaiting for your golden replies & Have a nice day, points will be assign for useful answers.
    Thanks in advance,
    KUMAR.

    Kumar,
    It is not in OBXR it is belongs to OBYR.
    While creating spl gl indicator we have to give alternative recon a/c and give link between recon to alternative recon a/c i hope you missed that configuration.
    please check it it is uesful assign the points....
    Raj.

  • Clarification on Account grouping -OMWN for 101 movement type

    Hi SAP MM gurus,
    In OMWN - Account grouping , I am not able to find any entry for 101 (Goods receipt for Purchase order B and with no consumption posting ) with Value and Quantity updates . There are entries for 101 movement type with special stock indicator but not able to find any entry for standard good receipt for Purchase orders ( No Special stock Indicator , Value and Quantity update checked , Movement type indicator B and No Consumption posting ). There are no issues with the accounting posting for goods receipt with standard purchase order with BSX being debited and WRX being credited. I am trying to understand the logic for this posting and I am not able to understand from where (customization settings) this posting is derived from. May I request your valuable inputs in understanding this logic.
    Thanks in advance for your immediate response.
    with regards,
    Anandj

    Hi there,
    Not sure where you want to go... but here is a tip
    Would it make sense to have value and qty update and no consumption ? it can either one or the other but not both.
    Now in prg there are further checks that makes other option possible like a GR for PO that is not valuated.
    Remember that these key determination behind the account grp / TE key is a kind of black box where the prg is hardcoded to sort out what keys to take.
    I hope this helps... Cheers

  • Cbs build portal application dc fail.  Build Plugin IS NOT DEFINED for this

    hi all
    I use NW7.0 ehp1,have portal and a nwdi.
    I create a track at nwdi . and develop a portal application .
    local build is ok . but when i check in .run a activitce.  dc is broken.
    log is -
    CBS Request Log - [  300/DEP_PESKM_D  ]
    Build number assigned: 314
    Change request state from QUEUED to PROCESSING
    REQUEST PROCESSING started at 2010-11-05 02:17:38.921 GMT
        ACTIVATION request in Build Space "DEP_PESKM_D" at Node ID: 13,975,650
         [id: 300; parentID: 0; type: 4]
         [options: NO OPTIONS]
        Waiting for access: 79 ms
        ===== Pre-Processing =====  started at 2010-11-05 02:17:39.000 GMT
            List of requested for activation activities:
                'deep.com_PESKM_1' compartment
                    tet
                        [ISN 111][created by YANLIANG at 2010-11-05 10:17:31.0][OID 6b2f604ae87c11df94ff000000d54062]
                There is 1 activity in compartment deep.com_PESKM_1
                1 activity will be processed by this request
            Analyze dependencies to predecessor activities... started at 2010-11-05 02:17:39.031 GMT
                Analyzing predecessors in compartment "deep.com_PESKM_1"
                    No dependencies to predecessor activities found.
            Analyze dependencies to predecessor activities... finished at 2010-11-05 02:17:39.046 GMT and took 15 ms
            Analyze versions... started at 2010-11-05 02:17:39.046 GMT
                List Active Versions Report: "HTTP/1.1 207 Multi-Status" finished at 2010-11-05 02:17:41.812 GMT and took 2 s 766 ms
                Synchronize metadata for [deep.com.cn/dc_logo_par] started at 2010-11-05 02:17:41.812 GMT
                    Verification of DL [ws/PESKM/deep.com_PESKM/dev/active/] finished at 2010-11-05 02:17:41.906 GMT and took 0 ms
                    Verification of cache (level 2: Comparison of attributes) finished at 2010-11-05 02:17:41.937 GMT and took 31 ms
                Synchronize metadata for [deep.com.cn/dc_logo_par] finished at 2010-11-05 02:17:41.937 GMT and took 125 ms
                < CHANGE > 'deep.com.cn/dc_logo_par' DC
            Analyze versions... finished at 2010-11-05 02:17:41.937 GMT and took 2 s 891 ms
            Analyze activities... started at 2010-11-05 02:17:41.937 GMT
                Loading component definitions
                1 component to be build in compartment "deep.com_PESKM_1"
            Analyze activities... finished at 2010-11-05 02:17:42.000 GMT and took 63 ms
            Calculate all combinations of components and variants to be built...
            Analyze request DC BV... started at 2010-11-05 02:17:42.109 GMT
                    'deep.com.cn/dc_logo_par' variant 'default'
                    'deep.com.cn/dc_logo_par' variant 'default' cannot be built. ACTIVATION will fail.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
            Analyze request DC BV... finished at 2010-11-05 02:17:42.140 GMT and took 31 ms
        ===== Pre-Processing =====  finished at 2010-11-05 02:17:42.187 GMT and took 3 s 187 ms
        Change request state from PROCESSING to FAILED
        Error! The following problem(s) occurred  during request processing:
        Error! The following error occurred during request processing:Activation failed due to component "deep.com.cn/dc_logo_par" variant "default". The component is BROKEN.
    REQUEST PROCESSING finished at 2010-11-05 02:17:42.187 GMT and took 3 s 266 ms
    No build logs available for the request.
    Edited by: yan liang on Nov 5, 2010 3:12 AM

    Hi Yan,
    please check the NWDI troubleshooting guide:
    http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29%28CBS%29Q0030
    --> Understanding Broken and Dirty DCs
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b7c94e-fc6b-2910-30b8-d34a7b51309e
    Did you import the dependent build plugins for the track in question?
    (tab "development" in the /devinf --> CMS webui --> Transport studio)
    See also the sap note: #1080927 - Creating CMS Tracks for Common Application Types (http://service.sap.com/sap/support/notes/1080927)
    Best Regards,
    Ervin

  • Tab Groups Missing

    Using Firefox 3.6.18, I had several tab groups defined with several web pages in each group. I closed Firefox and my tab groups are gone.
    The icon for tab groups is missing from the toolbar and I can't figure out how to get it back. Pressing CTRL+SHIFT+E does nothing. Under Tools, Options, General, the startup option is when Firefox starts, "Show my homepage" and it is greyed out. I have disabled all addons and the problems persist.
    I don't understand why this feature just suddenly decided to stop working. I've decided to trust Tab Groups twice now and have been burned both times. This feature is a great feature, but if it is as unreliable as I've found it to be, I can't put my faith in using it.
    How do I re-enable Tab Groups on my system, and how do I recover the groups that I had defined?

    App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data [1] in the file sessionstore.js [2] in the Firefox profile folder [3].
    Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
    * https://support.mozilla.com/kb/Clear+Recent+History
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js
    * [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox
    It is also possible to use the "Show my windows and tabs from last time" setting, that is usually a more reliable way to restore session data.
    * [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

  • Are Tab Groups supposed to be permanent?

    When I set one up I expect it to be there where I start from scratch with Firefox. This does not seem to be the case. If I set up a Tab Group, give it a name, shutdown firefox, the next time I select the "group your tabs" button, the group I created is not there. And I see no "Group Tab" button that is supposed to be there after you create a Tab Group.

    Thanks for the reply. I never clear recent history. Tab Groups that I have set up and named disappear when I shut down Firefox. If I add more tabs, then they are automatically added in a Tab Group I defined. For the developers, if these groups are not defined and persistent then this feature is mostly a waste of my time. I named a tab group: finance. There should be a list of these groups that I have defined so I can click on a single button and pull up the group at any time in it's own window. If this can't be done then Panorama is an overrated feature not worth messing with IMO.

  • How do I save or restore all of my tab groups (preferably 1 operation)?

    I would like to save all of my tab groups, both for backup purposes but also for migration to another computer. How can I do this as a single operation?
    The same consideration would apply to restoring all the tab groups from a previously saved session.
    Eric

    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore
    You can make a backup copy of that file.
    Help > Troubleshooting Information > Profile Directory: Open Containing Folder

  • App Tabs in Tab Groups

    How come when I add/remove an App Tab from a Tab Group, it removes the tab from all tab groups?
    For instance:
    I have an App Tab for my gmail that I only want to show in one of my Tab Groups. If I remove it from Tab Group A, it is also removed from Tab Group B.

    Yes, when you bookmark a tab, the drop down menu at the very bottom will have "tags" and you put what you need to there.

  • AppleScript to mount network share & launch application fails on computers

    Hi All,
    I am trying to write a script that I can place in the dock that will perform two actions. The first action is to mount a sharepoint, the second is to launch an application.
    I have been very successful at doing this on my iMac (Intel). The script works under any user.
    However, I have a lab of 26 Mac Minis (Intel) and the script won't work!!
    Here's my script (it's simple!):
    tell application "Finder"
    mount volume "afp://ok-xserve-01.mpcsd.org/Apps" as user name "[user]" with password "[password]"
    end tell
    launch application "Type To Learn 3"
    Of course, I replace the items in brackets with their appropriate values.
    I save the script as an application. When I try to run it on any of the Mac Minis, I get the following error message:
    '"afp://ok-xserve-01.mpcsd.org/Apps" doesn't understand the <<event aevtmvol>> message'
    I've tried it w/o "as user..." and also in the form of "afp://user:pass@server/share" but all returns the error message above.
    I even logged in as the user on one of the lab computers, created the script, and it ran! As soon as I logged off and logged back in, it stopped working.
    These systems, along with my iMac, are bound to an Open Directory & Active Directory, and authenticate via Active Directory.
    I can log in as the lab user on my iMac, and the script will work every time I launch it. It'll work as any user on my iMac.
    Any ideas? If you need more info let me know!
    Thanks!!

    Try putting in the command "delay 30" before the other lines. It delays the script for 30 secs...OSX needs to load before running the script

  • How does Azure Compute Emulator (or the Azure one) determine if a role is web project or something else ("The Web Role in question doesn't seem to be a web application type project")?

    I'm not sure if this is F# specific or something else, but what could cause the following error message when trying to debug locally an Azure cloud service:
    The Web Role in question doesn't seem to be a web application type project.
    I added an empty F# web api Project to a solution (which adds Global.asax etc., I added an OWIN startup class Startup etc.) and then from an existing
    cloud service project I picked Roles and
    chose Add
    -> Web Role Project in solution, which finds the F# web project (its project type guids are 349C5851-65DF-11DA-9384-00065B846F21 and F2A71F9B-5D33-465A-A702-920D77279786),
    of which the first one seem to be exactly the GUID that defines a web application type.
    However, when I try to start the cloud project locally, I get the aforementioned error message. I have a C# Web Role project that will start when I remove the F# project. I also have F# worker
    role projects that start with the C# web role project if I remove this F# web role project. If I set the F# web project as a startup project,
    it starts and runs as one would expect, normally.
    Now, it makes me wonder if this is something with F# or could this error message appears in C# too, but I didn't find anything on Google. What kind of checks are there when starting the emulator and which one needs
    failing to prompt the aforementioned message? Can anyone shed light into this?
    Sudet ulvovat -- karavaani kulkee

    Sudet,
    Yeah you are right, the GUID mentioned seems to be correct and the first one i.e. {349C5851-65DF-11DA-9384-00065B846F21} means the web application project which compute emulator uses to determine while spawning up role instances.
    You might want to compare the csproj of your C# and F# web projects which might give some pointers.
    Are you able to run your F# web project locally in IIS? If yes then you will definitely be able to run it on azure so I will recommend to test it in IIS Express first.
    Here are some other tips which you can refer or see If you are yet to do those settings
    1. Turn on the IIS Express - You can do it by navigating to project properties
    2. Install Dependent ASP.NET NuGets / Web Api dependencies (If there are any missing), Reference System.Web assembly
    Also I will suggest to refer this nice article about how to create a F# web Api project
    http://blog.ploeh.dk/2013/08/23/how-to-create-a-pure-f-aspnet-web-api-project/
    Hope this helps you.
    Bhushan | http://www.passionatetechie.blogspot.com | http://twitter.com/BhushanGawale

Maybe you are looking for