Eclipse SLI: Can't change Base Clock in Bios

Not sure why, but in the Cell Menu in the Bios (v. 1.6) the Base Clock can't be changed - hitting Enter when it's highlighted does nothing.  It's not greyed out, just doesn't change.
I looked in the manual and it shows a setting for D.O.T. Control right above the Base Clock setting.  But my Bios doesn't have that listed.   :(
Any help?

Quote from: Jack t.N. on 26-July-09, 07:47:38
Have you tried the +/- keys (on your keyboard's numpad) or the page-up/page-down keys by any chance...? 
Duh...that worked.  Thanks!
Although maybe I'm too stoopid to overclock. 

Similar Messages

  • Can't change the clock?!

    We just received a new HD Set Top Box. After a successful installation, I realized that the clock displayed, as well as the clock for the menu and guide are incorrect. The time is off by 3 hours not just a daylight savings glitch. Anyway all the info I have found says you  can not change the clock, and that there is no need to, but I think in this case I need to. Help, suggestions please?!

    if the clock display is wrong, then it's not properly activated.  you'll want to do chat support so verizon can fix that, or call them.  tech support is 24/7

  • How can i change fpga clock for whole code

    Hi i'm new at labview and using 8.6 demo(real time and fpga modules).
    i developed some codes for practise and want to change clock freq to 200MHz from 40M for all codes.
    i mean how can i use derived clock for all my vi.
    LabVIEW 2009, Windows 7
    Solved!
    Go to Solution.

    PAR done!
    ERROR:Xflow - Program par returned error code 31. Aborting flow execution...
    when i use 200mhz as fpga clock i'm getting this error after compilation.
    is there a way to use fpga other then 40mhz. and i dont want to use timed loops because i am using
    loops inside loop.
    LabVIEW 2009, Windows 7

  • How can i change base language`s in firefox?

    i can`t change language in my firefox , it is farsi and i need it be english , thanks for helping

    If the Firefox user interface (menu bar) is in the wrong language or if you want to change the current language then you can get Firefox in the language of your choice here:
    * Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html

  • Can I change Base DN without affecting Current Users Permissions

    I have deploed Live Cycle ES2 Rights Management about 2 years ago with a very limited user group for my base DN
    Current Base DN
    OU=mysite,OU=mycorp,DC=corp,DC=com
    I want to change it now to
    OU=mycorp,DC=corp,DC=com
    Since i am broadning the scope i just wnat to ensure it will have no effect on my current users permission for secure docs.
    Can anyone confirm this?
    Thanks,
    Version: 9.0.0.0, GM Patch Version: SP1 Service Pack Version: 9.0.0.1.20100511.1.236952
    Chad

    I would have to test the scenario but I think that these users would be considered new users and they'll get disconnected from the policies. I may be totally wrong but this is definitely something I'd do on a test machine.

  • Can we change Base unit of Measure ?

    Hello,
    I got a requirement to change the name TO(tonne) base unit of measure in MM01 into MT. Is it possible to achieve this if ys share me the procedure.
    In short when i click F4 help in base unit of measure in the place of TO i want to change it into MT.
    Thks

    If u want to  change the base unit of measure... firstly do the conversion method... MM02 (If the material is a finished or semi finished) -> Work Scheduling View -> Put the UNIT OF ISSUE (MT) and then give the conversion factor unit measure.... and save...
    if u want to change the base unit of measure... Change the MRP PRofile and then change the Base Unit of Measure...
    It is better to consult PP and MM Consultant....
    I think you got the solution... Give me the point....
    With Regards,
    Debopriyo

  • Qosmio F10 - Can't change HDD type in BIOS

    I want to change my hard disk but the category in BIOS is not changeable.
    I cannot change the hard disk type in the BIOS like on my desktop PC.

    Hi questionman
    I was mistaken; the F10 is a little bit older notebook and it supports IDE HDD controller!
    Usually the BIOS should recognize the inserted HDD automatically
    If this is not the case then the issue could be related to controller fault
    But one thing is important and should be checked;
    Some 2.5" HDD supports differetn pin assigment. You should check if you would need to change the jumper on the HDD...
    A friend of mine has had an similar issue and he could solve this changing the position of the jumper...

  • Eclipse SLI CPU fan always on max

    Hello i got a problem with my Eclipse SLI. It's look like the CPU smart fan function don't work and the CPU fan is on max all the time.
    My bios temp's goes from 32-40 C. I have used a lot of different bios versions. 1.4 - 1.7 - 1.9 - 1.a none of those could fix it.
    Eclipse SLI
    Intel i7 920 - standard clock
    hope anyone got a good answer to my question. thx

    Quote from: mibsen on 10-December-09, 05:40:05
    Hello i got a problem with my Eclipse SLI. It's look like the CPU smart fan function don't work and the CPU fan is on max all the time.
    They have a switch for "always maximum cooling" and "temperature controlled speed". Check your CPU fan - it may help to read the CPU installation instructions as they show where the switch is. I would guess that you have it in the wrong position, so your BIOS can't do anything...
    Screet

  • How do I change the clock source in Audio/Midi when it's greyed out?

    I've tried and tried to change the clock source to eliminate pops and clicks in audio output and input but I just can't change the clock source because it's greyed out - how can I make it changeable?
    Any suggestions would be great !

    Hi, Acoma.
    Have you seen the steps and specifics (analog vs. digital inputs) discussed in:
    • "Soundtrack Pro: Setting the correct clock source for your audio interface."
    • "Logic Pro/Express: Digital input not available."
    Providing more specifics concerning your exact recording configuration may enable the audio gurus who answer questions here to give you additional assistance. You may also want to try your question on the Discussions for either of Apple's Soundtrack or Logic products, as those contributors are most familiar with audio set-up issues.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Changing Base Amount

    Hi Experts,
    How can i change Base Amount for calculating VAT.
    in SPRO->Fin Acctng->Tax on sls/purchases->Basic Settings->Change field control for Tax Base Amount.
    In the above path i can do the setting for a particular TAX procedure in notes it says one can change base amount in MIRO, but in the transaction MIRO base amount field is greyed where can i change this amount.
    pls guide me in this regard.
    Regards
    Ashok.

    Hi
    U can do the condition type as changeble at MIRO instead of Display mode.
    This can be achived by selecting  the control parameter at Condition type level.
    <b>In SPRO--> MM --> Purchasing --> Conditions --> Define price determination process --> Define condition type</b>
    Select the Base condition and go to Details.
    In details tab select : Amount/percent check box in Changes which can be made sub screen and save it.
    By doing this the amount of conditon type can be changed in sub sequent process like MIRO.
    Thanks
    Ramakrishna

  • Plant Maintenance - Can I change 'validity to' in installed base ?

    Plant Maintenance - Can I change 'validity to' in installed base ?
    I don't know how the validity is taken as end of last month.
    I am trying to do that but it seems its not possible.

    hi
    this link can help you regarding Installed Base
    http://help.sap.com/saphelp_47x200/helpdata/en/19/db7cd6d82c11d19ddf0000e8323350/frameset.htm
    -ashok

  • Widgets world clock can't change country when I update to Mountain Lion

    Hello everyone,
    When I update to Mountain Lion (from Lion), the widgets world clock can't change other country (the clock can't show the information button).
    Is this a bug ? Do you have the same problem ?
    My mac is Macbook Pro (2011 Later)
    Thanks

    I had the same problem. It looks I was able to fix this using the steps below:
    1. Make sure you have a current backup, such as a Time Machine backup!
    2. Go into Dashboard and close the World Clock widget(s).
    3. Rename or trash the file:
    ~/Library/Preferences/widget-com.apple.widget.worldclock.plist
    I'm not sure if it's needed but I also deleted:
    ~/Library/Preferences/widget-com.apple.widget.worldclock.plist.lockfile
    4. Open Terminal and type the following command (case-sensitive): killall Dock
    See if that works.

  • Can't change clock alarm tone (N97)

    I'm having an issue on my phone (N97) where i try to set my alarm tone to anything other than 'default tone' to wake up to in the morning, when i click on it, the loading bar comes up with "opening" for about 15 seconds,  then i get an error "Clock: Memory full close some applications and try again"
    I only did a hard reset on this phone last week, along with a complete format of the mass memory, then reinstall of apps, yes another handful of hours goven away to nokia. It is running v20
    BestTaskman is telling me i have no applications open and 40.48Mb of RAM free. how can changing the clock tone use up 40Mb of RAM???
    I can change my ringtones in profiles just fine...
    Most probably has somethign to do with the 17.5GB or so of music that I have on the mass memory, but really, that shouldn't make a difference, did they give us a 32GB phone and expect us not to use it?
    has anyone seen this or know how to fix it?
    Message Edited by alexeiw123 on 22-Nov-2009 09:11 PM

    i am getting something similar.
    Loading.....
    then memory issue can only display a few or something like that.... then just closes back to main menu.
    Also still have loads of other files in my c: and not getting much love in these forums other then reset phone. must be another way...must be...

  • Can I change the time format of incoming mails, in Mail? Now I have AM/PM, but I live in Denmark where we don't use that format. We have a 24-hour clock format i.e. 14:52 instead of 2:52 PM.

    Can I change the time format of incoming mails, in Mail? Now I have AM/PM, but I live in Denmark where we don't use that format. We have a 24-hour clock format i.e. 14:52 instead of 2:52 PM.

    Is the time format of your Mac in 24 hour?

  • How can I change the base station my airport express connects to?

    I just added a new AirportExpress to my wireless network and am using it to extend the range of the network and for AirPlay. When setting it up I selected the main base station that provides the wireless network when asked to select a device for it to connect to. However, now when I view it in Airport Utility, it's the only device on the network that has only Good signal strength rather than Excellent. There is another AirportExpress conencted which has Excellent signal strength that is the closest access point to this new AirportExpress.
    How can I change the setup using Airport Utility so that that's the device that it's using to connect to the network?

    With a Mac using the Airport Utility.
    With a PC using the Airport Utility you can install on your PC with the install disc included.

Maybe you are looking for