Eclipse SLI wont wake from S3 sleep in Windows 7 Professional 64 Bit

I have just upgraded my OS to Windows 7 64 bit. I am setting the PC up so that I can work on it over the internet using Remote Desktop. I want to be able to turn the PC on over the internet on request so that I don't need to leave it switched on all the time. I also want to the PC to go to sleep when it isn't being used to save power and extend the lifetime of the mother board.
So far, I can successfully wake the PC up remotely from an S1 and S5 state no problem. However, the PC doesn't successfully wake up from an S3 hybrid sleep state. When I send the magic packet or move the mouse, the machine tries to wake up, the fans start and the lights come on but there is no hard disk activity and the monitor remains blank. At this point the only thing I can do is press and hold the power button to shut the PC down. When I power up the PC for the first time afterwards, it starts for about 2 seconds then turns its self off, then it come back on about 5 seconds later and recovers my previous windows session as if the machine had just woken up from a sleep.
Any help will be gratefully received.
Mike H

I have more information. I read a post here that claimed wake up from S3 stops working if you over clock BCLK past 170.  I reset my bios to safe settings and set up hybrid S3 sleep and it worked !!!
Next step was to start to apply my over clock one step at a time and find which bit was messing up S3 wake up. It does seem to be the BCLK. With memory clock multiplier set very low so that memory wasn't the problem, I adjusted BCLK upwards until S3 wakeup stopped working. I haven't finished testing yet but it is somewhere between 165 and 170. As long as BCLK is at 165, wake up from S3 works fine. The other post can be red here:-
https://forum-en.msi.com/index.php?topic=136780.0
If this is the problem, it's very disappointing because my system runs stable at BCLK 195 with the multiplier at 21.
Mike H

Similar Messages

  • Macbook Pro wont wake from sleep

    My '08 MacBk Pro wont wake from sleep. This has happened several times since I installed Lion. In the past I have simply clicked several times on the trackpad until it woke, but on several occasions it actually shut down after entering sleep mode, (It went to black screen, the little pulsing sleep light was dark and I got no responce to clicks on trackpad or keyboard). When this happens I can usually re-start the Mac with a hard re-boot to resolve the issue. This time however, I can't get the computer to turn on. I've tried pressing the power button once, and all that happens is that the sleep light blinks once along with a the normal whiring sound you hear when the computer is ramping up, but this lasts only a second and then it goes back to black screen/dead Mac. I also tried holding down the power button as I would for a hard reset at which point I get several blinks from the pulsing sleep light and then nothing. I also tried unplugging the cable, removing the battery and pressing the power button for 5 seconds, then reconnecting battery and cable and pressing the power button, (I got these steps from an article posted here on the furums). BTW, I have disconnected all external drives, etc. before trying any of these steps. Please let me know if there's something else I might try to revive my Mac.

    Follow up: I took the MacBook Pro for repair and the tech found that the logic board was damaged - probably due to so many hard resets I had to perform to get the machine to load when starting it up after shutdown or restart. I replaced the logic board, (Very expensive) and its been running fine for 3 days. However, the freezing problem has just started again and I'm worried that having to perform a hard reset to get the macbook to load will cause more damage.
    The problem that's occuring is as follows: When I start the computer up after shutdown, or sometimes after restart, the desktop fails to load and the spinning color wheel appears. I can see the dock and the main upper toolbar but my desktop is blank and my external hard drives do not load. I can't make any selections with the cursor because of the eternally spinning color wheel, so my only option is to perform a hard reset by depressing the power button until the unit shuts down. When I start it up again the system loads correctly. I have tried ejecting my external drives before shutting down, but this doesn't make a difference. This problem started when I installed Lion OS and got continually worse until the computer finally shut down for good and I had to replace the logic board. Now it's starting to happen again.
    Has anyone else experienced this problem running Lion on a MacBook Pro early '08? If so, please help me find a solution for the freezes. 

  • My iMac 24" late 2006 refuses to wake from deep sleep,

    My iMac is refusing to wake from deep sleep or from a shutdown, will start if I persist in either using safe mode or command mode (cmd + s)but can take many attempts, have repaired permissions and verified disk, on permissions it is constantly changing the permissions on preference panes as listed below, but this is a shortened view, there are 23 lines like this.
    permissions differ on "SystemLibrary/PreferencePanes/Displays.prefPane/Contents/Resources/sk.lproj/Di splaysPref.nib" should be drwxr-xr-x they are -rw-r- -r- -
    Would it be ok to trash the Preference Pane folder and let it rebuild ???
    Any help welcome

    Helio, you can mostly ignore repeated Permission Repairs.
    To remove Prefpanes, right click on one & nchoose Remove.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • 890FXA-GD70 Will Not Wake From S3 Sleep

    890FXA-GD70 will not wake from S3 sleep; the power comes back on and the fans run but the video never returns and the system hard locks with a POST code of 22 or 24. Other than this issue the system is rock solid.
    Windows 7 Ultimate 64
    AMD Phenom II X4 955 Processor
    Sapphire 5870 Graphics
    Crucial M4 SSD
    Corsair DDR3
    No overclock
    I have reproduced the issue on two 890FXA-GD70s motherboards and I am convinced that this is not a result of a failed motherboard. I also was able to move my fully installed SSD hard drive, processor, memory and graphics card to an Asus 890FX board and successfully wake from S3 sleep proving that my OS and driver installation are working correctly.
    I know how to properly set the BIOS as I have installed many 890GXM-G65 motherboards for S3 sleep without issue. The problem seems unique to the 890FXA-GD70.
    Is there a fix for this?

    I have identified the cause. The "Extra RAID/IDE Controller" must be "Enabled" to use S3; otherwise the system will hang on the wake event. This is true even if the "Extra RAID/IDE Controller" goes unused. The "Extra RAID/IDE Controller" must be set to "Enabled" for S3 sleep to wake.
    This would seem to me to be a bug since none of the other MSI boards I have used require the optional IDE controller to be enabled in order for S3 to function properly.

  • Macboor air 13 late 2010 freezes when wake from deep sleep

    Hi. I have had this problem for a few months and still havent found a solution. This macbook air freezes and is totally unresponsive for five or six seconds when it wakes from deep sleep. I have tried:
    1 Apple hardware test, which came up negative. No hardware problem detected
    2 reset the SMC several times. No fix.
    3 repaired permissions in disk utility, and also verified and repaired disk. Still no results.
    4 restarted many times.
    5 tried booting in safe mode, but it made the machine hang.
    The only thing I havent tried yet is resetting the PRAM. in the event that that doesnt work, does anyone have any ideas. I only found thre

    I think it might just depend on how often your machine does this. My MBA 13 has done what you are describing one or twice, but its a rare event. I'm not too worried about it, but you might want to contact AppleCare and see if they have any more information...
    Sly

  • I have recently upgraded and am finding my iMac won't wake from a sleep state 80% of the time. What do I need to change or do to prevent this?

    have recently upgraded and am finding my iMac won't wake from a sleep state 80% of the time. What do I need to change or do to prevent this?

    Hi 02SilverSport,
    Try using the power button to wake the iMac.
    OS X Mavericks: Using the power button
    http://support.apple.com/kb/HT5869
    If you are using a wireless keyboard or mouse, check out this article:
    OS X Mavericks: Wake your computer with a wireless mouse or keyboard
    http://support.apple.com/kb/PH13997
    And for more generic troubleshooting, try this one:
    OS X: When your Mac doesn't sleep or wake
    http://support.apple.com/kb/TS5357
    where there's a section for "Your computer cannot wake from sleep" and "Your computer is slow to wake from sleep".
    Best Regards,
    Nubz

  • X505-sp8915r wont wake up after sleep mode

    My laptop wont wake up after sleep mode (suspender). The laptop does everything it should like the red lights go off but when i hit the power button just the power red light goes on... The keyboard backlights if I try using it but the monitor wont show anything and the hard disc red light doesn't even blink.
    Hibernation seems to be working fine. I had to change all that will make my computer enter sleep mode to hibernate. But I would like to get that fixed. I read something about the bios and my version is "BIOS Version: V1.40. 12/04/09.

    Qosmio X505-SP8915R
    The BIOS is up to v2.2 now. It's possible that will help.
       ACPI Flash BIOS version 2.20 for Qosmio X505 (PQX33U)
    See the long thread containing Jim's message.
    -Jerry

  • MBP (early 2009) won't wake from Display Sleep

    My MBP has started to not wake from Display Sleep (the machine is not sleeping, only the display). The only way to get it back is to force power off by holding the power button down.
    The weird thing is, when I power it on, it shows the 'loading RAM from disk' progress bar down the bottom of the all grey screen, as if the battery ran out. But I have it connected to a power source. Once it loads the RAM, the screen goes blank and it hangs. Another force restart and it boots to the login screen as per normal.
    One thing I have noticed is that when this all happens (ie, when I try to wake it and nothing happens) the fans are on about medium speed and its very warm, as if there is some process thats causing high CPU usage and preventing the display waking. I usually have a few browsers open, iTunes, etc, nothing out of the ordinary.
    I might try connecting via screen sharing next this happens to see if its responsive over the network -- i'll post my findings here.
    I have screen saver with password protection turned on, and its connected to an external apple display.
    Has anyone else experienced this?

    Try a SMC reset.
    DALE

  • Have photoshop 6 on a dead pc laptop with windows XP.  Have a pc laptop that has been upgraded from Vista 64 bit (where photshop wouldn't install) to windows 7 professional 32 bit (clean install).  Photoshop still won't install. Also having reinstallation

    I have photoshop 6 on a dead pc laptop with windows XP.  Have a pc laptop that has been upgraded from Vista 64 bit (where phootshop 6 wouldn't install) to windows 7 professional 32 bit (clean install).  Photoshop still won't install. Also having reinstallation issues with pse6 on this same pc.  Pse6 was installed and working on vista 64bit version of the OS, now won't install on rebuilt windows professional 7 32bit (keeps giving me serial number not valid errors).  I'm not trying to pirate these programs.  Just want to reinstall them.

    you need,
    Windows 98, Windows 2000, Windows NT 4.0 with Service Pack 4, 5, or 6a, or Windows Millennium
    Microsoft Windows 98/Millennium/2000/NT 4.0 (Service Pack 4, 5, or 6a required)

  • Have Photoshop Elements from 2001.  Got new computer with Windows 7 Professional 64 bit.  It won't run on my new computer.  What version is MOST SIMILAR to the old version I have, that will run on W7P-64?  Thanks for any help.  Popjer

    Have Photoshop Elements from 2001.  Got new computer with Windows 7 Professional 64 bit.  It won't run on my new computer.  What version is MOST SIMILAR to the old version I have, that will run on W7P-64?  Thanks for any help.  Popjer

    You should probably just download the trial version of pse 12 and see if you can live with it.
    Download a free trial or buy Adobe products | Adobe downloads
    That being said, have you tried to install pse 1 on your computer?
    How much free space is on your hard drive?
    Do you have Internet Explorer 10 or 11?
    Pse 1 can run on windows 7 x64, provided certain conditions are met.

  • Tx2517ca From Windows Vista Home Premium 32-bit to Windows 7 Professional 32-bit

    Hi Everyone,
    I have a very specific question. I currently am running Windows Vista Home Premium 32-bit, but I want to use Windows 7. However, I want to use Windows 7 Professional 32-bit (rather than Windows 7 Home Premium) and understand that this will require a clean install.
    Before I purchase Windows 7 Professional, I want to make sure that this can be done correctly. Does anyone know if this is possible or have already done this?
    I have downloaded and ran Windows 7 Upgrade Advisor which told me that I would be able to upgrade to Windows 7 Home Premium or Ultimate, but it does not mention Windows 7 Professional at all. I'm assuming this is because it would require a clean install.
    Thanks for your time,
    Lauren

    thanks ... I see now from your other post that you're probably getting either a "missing QuickTime.msi" message or being told that a "newer version of QuickTime" is installed when you try to go ahead and uninstall QuickTime after you're told about the Key?
    Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly this time?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • New macbook pro wont wake from sleep

    Hi everyone, I got the new macbook pro 15 inch with retina display about a month ago, the problem is it will not wake from when the screen goes to sleep, not all the time but enuff for me to want to throw it out the window, when it is in sleep mode i go to touch the touch pad then the keybord lights up like its about to work then dies and i end up tuning the computer off from the off button.
    I have been on the phone with apple for many hours and its doing my head in and losing my mind and they have done a re set, a re install and also after that didnt work we wiped the computer and downloaded the software directley from apple and started fresh again " AND STILL DOES NOT WAKE FROM SLEEP " i have taken it back to jb hifi where i got it from in Liverpool westfields and they said sorry we cant help you and apple are saying you have to take the computer to apple and leave it with them for a few weeks, very hard for me as i use the computer everyday to run my business and i feel ripped off big time they should replace it straight away.
    Has anyone had this problem before ? any ideas ? thank you very much for you time.  Dave

    Apple has replaced systems for others after several tries at repairs have failed.  Find an Apple Authorized Service Provider and take it in for service, as Apple support directed.  Apple would have replaced the system outright in the first 14 days of ownership. After that, you need to give them the opportunity to repair it under warranty. 
    Since you use it for business, have you asked if the Apple Authorized Service Provider can provide a loaner? Or considered renting one for the short period it would be repaired? Or talked to the Apple Authorized Service Provider about expediting repair?

  • PB wont wake up. Sleep light in the front is constantly on

    Hey guys, i'm having a big problem with my PB 17. It wont wake up at all from what I think is sleep. When I open the lid, or when I push the power button or even hold down the power button, the flashing blue/whiteish light stays on and never goes away. Even when I close the lid or disconnect the battery from the PB, the light still stays on. The Hard drive is off, the screen is off, its not making any noise at all. Just a nice little light on the front. Can't get anything to go.
    Any one have any ideas?
    Thanks

    Reset the PMU: it didn't work.
    Removed the list of PMU as suggested by another discussion in the form: it didn't work.
    It was just getting worse and worse that the computer fell asleep every 5 seconds.
    I took it to the Apple Store. The guy at the Genius Bar immediately said that it's due to the top case, which was exactly the same as what I found out from Google and Apple Discussions. Two days later I received the call regarding that the computer is ready to be collected. The topcase has been replaced. The computer has been working fine so far.

  • My powerbook G4 12" wont wake up after sleep anymore all the time!

    Hi there
    I've got a problem with my 12 " pb. quite often it wont wake up anymore after sleeping mode. I then press the "p", "r", comand, and "alt" together with the power button and usually that works. sometimes I need to do that 3 or more times untill it finally starts up again. I ran the hardware test, repaired everything I could but it still does it and I cannot figure out why.
    Do you have any ideas what could cause this problem and if so what I could do to solve it?
    Thank you very much

    Luca:
    If you leave your computer on all the time and allow it to sleep instead of shutting it down, you should completely shut it down every now and then (I do this weekly) and then start up in Safe Mode, log in, empty Trash and Restart normally and log in.
    Let me know if this helps.
    Cheers
    cornelius
    Message was edited by: cornelius

  • My IMac wont wake up after sleep mode

    Every morning when I want to wake my IMac from the sleep mode I have to restart it because it is impossible to open it. I tried the keyboard and the mouse but nothing works. Please help

    Zap the PRAM:  http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM
    Mac OS X (10.6.7)
    Use Software Update or the OS 10.6.8 combo update to update your OS.  Also, update everything SU has to offer for your computer.  When done, repair permissions and restart your computer.

Maybe you are looking for