ECM and Activation in ECC 6.0

Hello Everyone,
We are in the process of upgrading from 4.6C to ECC 6.0.
I have noticed that the ECM (Enterprise Compensation Management) items are not in config or in the Easy Access menu. Is there something additional that needs to be installed with ECC 6.0 in order for the ECM menu items to appear or something that I need to turn on? I have updated T77S0 HRECM ECMON with an 'X', but this does not make anything appear.
Scott

As far as I know you activate ECM in IMG ie Activate Enterprise Compensation Management under the section Global Settings of the IMG ( SPRO) . But then it is equivalent to maintaining the table entry for ECMON in T77S0 which you had done. Did you check in OSS?
~Suresh

Similar Messages

Replication of functional location and equipment from ECC to CRM.

Hi Guys
I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
- Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
Bye,
sekhar.

SOAMANAGER - Alternative URLs for WSDLs and Endpoints in ECC

Hi All,
We are publishing enterprise services using SOAMANGER transaction in ECC system. In
our development environments we have no problem with the process.
However in our cert and production environments we have loadbalancers,
with SSL offload, and so both port and URLs for the endpoints and WSDLs
need to reflect the different port/url introduced via our loadbalancer
and SAP web-dispatchers.
We have looked at note 11325985, which provides good guidance - however
when we use the alternative host / port as described on page 2 of the
note the service cannot be saved and activated -
Steps for Reconstruction
Run Transaction SOAMANAGER in one of our ECC systems SED/SEQ/SEP
Activate a standard SAP enterprise service, i.e
ECC_CUSTBASICDATABYIDQR_V2
In the Transport Settings tab of the Configuration of Web Service we
enter alternative URL - our load balancers URL for cert is
erp.XXX.com and for prod erp.XXX.com. When we save the
service it produces the following error ( when we don't specify an
alternative Access URL there is no error;
ERROR: ICF: Error when creating alias node: rc: unknown nMethod:
Alias Create; return code 15
Error Message Number Screen Number Transaction Program Table
Regards,
Ramesh

1-Use the Tx: SRT_TOOLS
2-Double-click on "Display of Extended Service in Current Client Configurations"
3-Complete the "Configuration Name" with the name of the endpoint / service
4-Click on run
5-Double-click on the "Configuration Name" found in the left tree
6-You will obtain the url you are looking for without using the SOAMANAGER
7-Enjoy

IS O&G - is it possible to use MPL without activating the ECC- DIMP?

Hi
We are an Oil and Gas industry and activated IS oil and gas in ECC6.0, our requirement is to use functionality such as Master Parts list which is there in ECC-DIMP under configuration control, as some companies within same group where MPL is required .
The question is it possible to use MPL without activating the ECC- DIMP
Request you to please help us to understand.
Regards

Hi Venkat,
If a report is created over a DSO, it pulls data from the active table of a DSO. So as suggested in all the posts above it is not possiable to report on the DSO without activating it.
Activation of DSO only allows to generate SID's to link transaction data and master data, SID's could also be generated at the time of reporting (When the report fetches data from BI server, but for the SID generation data is needed in active table). Also activation checks the correctness of data etc.
Could you please let know why you want to report on the unactive request, is it having some problem with activation?
Regards,
Pankaj

Facing the error : Status and active flag in one item do not match

Hi Experts,
I am getting error : Status and active flag in one item do not match in GOA distribution and while adding item in the item data , following are the relative information :
I am using SRM 4.0 and Item is free text.
Please help if you have faced such an error.
Thanks,
Atul

question not clear. you have activate one line item and the same not in ECC contract.
for ex
4600001000 - GOA
item 1 - active
ecc
4600001000 - contract
item - inactivate
-locked
muthu

OBIEE 11G with Single Sign-On and Active Directory

Hi guys,
Release Version: Oracle Business Intelligence 11.1.1.5.0
Patch applied: 11.1.1.5.0 BP3 (Patch 13832750)
OBIEE Server operating system: Windows Server 2008 SP2 (32-bits Operating System).
We are trying to configure Single Sign-On according to TechNote_WNA_SSO_AD_V4.0.doc.
Our krb5login.conf:
com.sun.security.jgss.krb5.initiate {
com.sun.security.auth.module.Krb5LoginModule required
principal="[email protected]"
keyTab=cgdkobi2.keytab
useKeyTab=true
storeKey=true
debug=true
com.sun.security.jgss.krb5.accept {
com.sun.security.auth.module.Krb5LoginModule required
principal="[email protected]"
keyTab=cgdkobi2.keytab
useKeyTab=true
storeKey=true
debug=true
We generate de keytab file:
C:\OracleBI11g\user_projects\domains\bifoundation_domain>C:\OracleBI11g\jrockit_160_24_D1.1.24\bin\ktab.exe -k cgdkobi2.keytab -a [email protected]
Password for [email protected]:XXXXXXX
Done!
Service key for [email protected] is saved in cgdkobi2.keytab
C:\OracleBI11g\user_projects\domains\bifoundation_domain>C:\OracleBI11g\jrockit_160_24_D1.1.2-4\bin\kinit -k -t cgdkobi2.keytab cgdkobi2
New ticket is stored in cache file C:\Users\cgdkobi2\krb5cc_cgdkobi2
C:\OracleBI11g\user_projects\domains\bifoundation_domain>C:\OracleBI11g\jrockit_160_24_D1.1.2-4\bin\klist -k -t cgdkobi2.keytab
Key tab: cgdkobi2.keytab, 1 entry found.
[1] Service principal: [email protected]
KVNO: 1
Time stamp: Mar 15, 2013 10:34
C:\OracleBI11g\user_projects\domains\bifoundation_domain>klist
Current LogonId is 0:0x406163f5
Cached Tickets: (0)
We re-start the services and logon into analytics web and SSO doesn't work but there's not an error. It runs successfully with and Active Directoy user and password. Seems like SSO wasn't enabled, but I checked is enabled.
Any suggestion?
Thanks in advanced

Follow the posts : OBI 11.1.1.6.SSO and You are not currently signed in to Oracle BI Server" for OBIEE 11.1.1.6 SSO do the troubleshooting mentioned there.
Also check your logs for error like the one below:
[2012-03-09T16:42:36.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.securitysubsystem.checkauthentication.runimpl] [ecid: 6c98b5cce1f24814:2a613331:135f95fbdff:-8000-0000000000005b7a,0:1:1] [tid: 5932] Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)[[
If you are getting this when you login to OBIEE : You are not currently signed in to Oracle BI Server"
then you need to apply this patch : 13553428 QA:BLK:DELIVER TO CORP. OID LDAP USERS FAILED WITH IMPERSONATOR DOES'NT EXIST. 11.1.1.6.0 Generic Platform (American English) General Oracle BI Suite EE Apr 5, 2012 799.4 KB
Let us know the updates. Hope this helps. Mark if it does.!
Thanks,
SVS

Problem with installation and activation

Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]

I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>>

Difference between refresh of Report in Active Viewer and Active Studio BAM

We use the Oracle SOA Suite with BAM (on Linux) 10.3.2.0.
I have 2 questions:
1. We have made a report with several items and in Active Studio --> Select Report --> Edit mode --> I see the correct values for my report. When I open my report in Active Viewer I see data from yesterday. The report is not being refreshed. How can I change this, what is causing this difference between Active Viewer and Active Studio in Edit mode??
2. One of my items in my report always gives the message: opening (only in Active Viewer, in Active Studio/edit mode I can see the correct data).

Is your popup blocker turned off? I can only imaging that the popup blocker may be keeping the Live Data window from appearing and updating the dashboard. Active Studio doesn't do a Live update, but an update on report load.

Function modules to get wbs level budgets and activity level cost

hai gurus can any one tell me the function modules or any other bapis to get the wbs level budgets and activity level costs
thanx in advance
afzal

ok

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am connected. How do I get Editor to work?

You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.

Installing and activating Creative Suite 6 Design Standard on two computers?

Hello!
I purchased Creative Suite 6: Design Standard as a physical copy (with a CD) about a couple of years ago. I've installed it on my iMac, but now that I purchased a Mac Book Pro, I'd also like to install the package on the laptop. My new Mac Book Pro 13" with Retina display does not have a CD/DVD drive.
First of all, is it possible to have an Adobe package installed and activated on two computers simultaneously?
I tried to download the Creative Suite 6 from the Downloads on Adobe website and activate it on my laptop with the serial number that I received when I purchased the product, but the serial number did NOT work. It says "The serial number you entered is invalid." Does this problem occur because the serial number is in use on the Creative Suite, which is installed and activated on my iMac?
Is there another way to download + install + activate the package on my laptop? Obviously without a CD/DVD drive I cannot use the physical installation CD that I purchased.
Thanks for help in advance, I really appreciate it!
– Miina

Hello!
Thanks for the reply. I've been looking into this problem more but haven't been successful in solving it. Getting a bit frustrated with this!
The serial number seems to be the issue.. I don't know why it won't go through. Do I need a different serial number to activate a Creative Suite 6 Design Standard downloaded from the Adobe website? I used the same serial number that can be found on the back of the product box that I purchased a couple of years ago. So far I have installed and activated my product only with my iMac, and now attempting to activate it with my Mac Book Pro, so the problem is not that it's been activated too many times.
When I finally do manage to activate this software also on my laptop, do I have to deactivate and activate it every time I wish to switch from one computer to the other? Is there a limit to how many times it can be activated/deactivated?
Thanks again for your help!
P.s. I also consulted this person https://forums.adobe.com/people/Nikhil%20Bisne (not sure if he is around, though) on my issue, because he was able to help somebody with a similar issue here: Re: Invalid Serial Number . The difference being that this person was activating their software for the first time, I'm trying to activate it a second time on a different machine (while still keeping the software activated on the first machine).

How to get internal order and activity type other than from BSEG

We want the Internal order and activity type fields. From BSEG, it is taking a long time, and it hangs.
Is there any other table we can get these values from?
Our query is this:
select bukrs "Company code
gjahr "Fiscal year
belnr "Document no.
buzei "Document Item no.
aufnr "Internal order
lstar "Activity type
from bseg
into table gt_add_info
for all entries in gt_gl_detail
where bukrs = gt_gl_detail-rbukrs"Comcode from G/L acct detail
and buzei = gt_gl_detail-buzei "Doc item no. from G/L acct detail
and belnr = gt_gl_detail-belnr "Doc no. G/L acct detail
and gjahr = gt_gl_detail-gjahr."Fiscal yea
Can advise please how to make it faster. My internal table (GT_GL_DETAIL) has over 100000 records. ? thanks.

I did a SQL trace, and saw that tables CSLA, CSSL, COKL and COKA are being hit with the values I entered inthe Activity type in transaction FB50.
Still not clear but where it gets stored. If in any of these tables, how do I get the object key?

Looking for successful auth debug between cisco 1113 acs 4.2 and Active Directory

Hello,
Does anyone have a successful authentication debug using cisco 1113 acs 4.2 and Active Directory? I'm not having success in setting this up and would like to see what a successful authentication debug looks. Below is my current situation:
Oct 6 13:52:23: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:23: TPLUS: processing authentication start request id 444
Oct 6 13:52:23: TPLUS: Authentication start packet created for 444()
Oct 6 13:52:23: TPLUS: Using server 110.34.5.143
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT: socket event 2
Oct 6 13:52:23: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
Oct 6 13:52:23: T+: session_id 763084134 (0x2D7BBD66), dlen 26 (0x1A)
Oct 6 13:52:23: T+: type:AUTHEN/START, priv_lvl:15 action:LOGIN ascii
Oct 6 13:52:23: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:12 (0xC) data_len:0
Oct 6 13:52:23: T+: user:
Oct 6 13:52:23: T+: port: tty515
Oct 6 13:52:23: T+: rem_addr: 10.10.10.10
Oct 6 13:52:23: T+: data:
Oct 6 13:52:23: T+: End Packet
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT: wrote entire 38 bytes request
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: Would block while reading
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 16bytes data)
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: read entire 28 bytes response
Oct 6 13:52:23: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
Oct 6 13:52:23: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:23: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:10, data_len:0
Oct 6 13:52:23: T+: msg: Username:
Oct 6 13:52:23: T+: data:
Oct 6 13:52:23: T+: End Packet
Oct 6 13:52:23: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:23: TPLUS: Received authen response status GET_USER (7)
Oct 6 13:52:30: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:30: TPLUS: processing authentication continue request id 444
Oct 6 13:52:30: TPLUS: Authentication continue packet generated for 444
Oct 6 13:52:30: TPLUS(000001BC)/0/WRITE/46130160: Started 5 sec timeout
Oct 6 13:52:30: T+: Version 192 (0xC0), type 1, seq 3, encryption 1
Oct 6 13:52:30: T+: session_id 763084134 (0x2D7BBD66), dlen 15 (0xF)
Oct 6 13:52:30: T+: AUTHEN/CONT msg_len:10 (0xA), data_len:0 (0x0) flags:0x0
Oct 6 13:52:30: T+: User msg: <elided>
Oct 6 13:52:30: T+: User data:
Oct 6 13:52:30: T+: End Packet
Oct 6 13:52:30: TPLUS(000001BC)/0/WRITE: wrote entire 27 bytes request
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 16bytes data)
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: read entire 28 bytes response
Oct 6 13:52:30: T+: Version 192 (0xC0), type 1, seq 4, encryption 1
Oct 6 13:52:30: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:30: T+: AUTHEN/REPLY status:5 flags:0x1 msg_len:10, data_len:0
Oct 6 13:52:30: T+: msg: Password:
Oct 6 13:52:30: T+: data:
Oct 6 13:52:30: T+: End Packet
Oct 6 13:52:30: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:30: TPLUS: Received authen response status GET_PASSWORD (8)
Oct 6 13:52:37: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:37: TPLUS: processing authentication continue request id 444
Oct 6 13:52:37: TPLUS: Authentication continue packet generated for 444
Oct 6 13:52:37: TPLUS(000001BC)/0/WRITE/46130160: Started 5 sec timeout
Oct 6 13:52:37: T+: Version 192 (0xC0), type 1, seq 5, encryption 1
Oct 6 13:52:37: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:37: T+: AUTHEN/CONT msg_len:11 (0xB), data_len:0 (0x0) flags:0x0
Oct 6 13:52:37: T+: User msg: <elided>
Oct 6 13:52:37: T+: User data:
Oct 6 13:52:37: T+: End Packet
Oct 6 13:52:37: TPLUS(000001BC)/0/WRITE: wrote entire 28 bytes request
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 33bytes data)
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: read entire 45 bytes response
Oct 6 13:52:37: T+: Version 192 (0xC0), type 1, seq 6, encryption 1
Oct 6 13:52:37: T+: session_id 763084134 (0x2D7BBD66), dlen 33 (0x21)
Oct 6 13:52:37: T+: AUTHEN/REPLY status:7 flags:0x0 msg_len:27, data_len:0
Oct 6 13:52:37: T+: msg: Error during authentication
Oct 6 13:52:37: T+: data:
Oct 6 13:52:37: T+: End Packet
Oct 6 13:52:37: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:37: TPLUS: Received Authen status error
Oct 6 13:52:37: TPLUS(000001BC)/0/REQ_WAIT/46130160: timed out
Oct 6 13:52:37: TPLUS(000001BC)/0/REQ_WAIT/46130160: No sock_ctx found while handling request timeout
Oct 6 13:52:37: TPLUS: Choosing next server 101.34.5.143
Oct 6 13:52:37: TPLUS(000001BC)/1/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:37: TPLUS(000001BC)/46130160: releasing old socket 0
Oct 6 13:52:37: TPLUS(000001BC)/1/46130160: Processing the reply packet
Oct 6 13:52:49: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:49: TPLUS: processing authentication start request id 444
Oct 6 13:52:49: TPLUS: Authentication start packet created for 444()
Oct 6 13:52:49: TPLUS: Using server 172.24.5.143
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT: socket event 2
Oct 6 13:52:49: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
Oct 6 13:52:49: T+: session_id 1523308383 (0x5ACBD75F), dlen 26 (0x1A)
Oct 6 13:52:49: T+: type:AUTHEN/START, priv_lvl:15 action:LOGIN ascii
Oct 6 13:52:49: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:12 (0xC) data_len:0
Oct 6 13:52:49: T+: user:
Oct 6 13:52:49: T+: port: tty515
Oct 6 13:52:49: T+: rem_addr: 10.10.10.10
Oct 6 13:52:49: T+: data:
Oct 6 13:52:49: T+: End Packet
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT: wrote entire 38 bytes request
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: Would block while reading
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 43bytes data)
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: read entire 55 bytes response
Oct 6 13:52:49: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
Oct 6 13:52:49: T+: session_id 1523308383 (0x5ACBD75F), dlen 43 (0x2B)
Oct 6 13:52:49: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:37, data_len:0
Oct 6 13:52:49: T+: msg: 0x0A User Access Verification 0x0A 0x0A Username:
Oct 6 13:52:49: T+: data:
Oct 6 13:52:49: T+: End Packet
Oct 6 13:52:49: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:49: TPLUS: Received authen response status GET_USER (7)
The 1113 acs failed reports shows:
External DB is not operational
thanks,
james

Hi James,
We get External DB is not operational. Could you confirm if under External Databases > Unknown User Policy, and verify you have the AD/ Windows database at the top?
this error means the external server might not correctly configured on ACS external database section.
Another point is to make sure we have remote agent installed on supported windows server.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289013
Also provide the Auth logs from the server running remote agent, e.g.:-
AUTH 10/25/2007 15:21:31 I 0376 1276 External DB [NTAuthenDLL.dll]:
Attempting Windows authentication for user v-michal
AUTH 10/25/2007 15:21:31 E 0376 1276 External DB [NTAuthenDLL.dll]: Windows
authentication FAILED (error 1783L)
thanks,
Vinay

Had to buy a new laptop and am trying to install XI (current and active licensee)....registration setup screen indicates ("Invalid Serial Number")

had to buy a new laptop and am trying to install XI (current and active licensee)....registration setup screen indicates ("Invalid Serial Number")? Account is active.

Is it by any chance asking for a "qualifying serial number"?

PM Order Confirmation using Personnel's Cost Center and Activity Type

Hi All,
Is it possible to have PM Order confirmation (IW41) using Cost Center and Activity type from Personnel instead of default from Work Center? If it is, can it be done with some configuration or user exit? Please advise. Thank you.
Dai

Hi friend,
Order confirmation will be done for order operations.While doing confirmation we post the actual work done by the repective work center and respective activity type assigned to the same workcenter.
But these activity types are assigned to cost center for cost calculation.confirming the respective operation in maintenance order through workcenters gives the report of planned work and actual work done by the respective workcenter.
We cannot confirm the operation using costcenter and activity type directly through transaction IW41.
If you want to develop new confirmation screen and making confirmation of the respective order operation with only costcenter and activity type fields, you can do it .
Regards,
Pardhreddyc
Edited by: Pardhreddyc on May 17, 2011 12:45 PM

ECM and Activation in ECC 6.0

Similar Messages

Maybe you are looking for