ECM changes for Phanthom assembly

Hi Gurus,
I want to change the BOM - Item qty which is in Phanthom assembly, in CO02 - Production order.
Please guide me to do this, the same should be updated in my Production order also.
Regards
Chandru

Dear Chandrasekaran,
ECM - can be used for the creation & modifications for a BOM.
OCM is used for Change management in Production orders.
But to work with ECM & OCM,the necessary configuration settings has to be done first.
Check this,
Engineering change management (ECM) allows you to change various master data in a coordinated manner when they have to be
changed together within a change process. Future procurement elements can thus be created directly with a changed product
structure.
Order change management (change management for production orders), in short OCM, expands this function. It is possible to
include existing procurement elements (production orders, planned orders, purchase orders) that are also affected by a change, in the
change process. The change process begins when a sales order or master data is changed. You can also adapt production orders on
which work has already been done to the changed product structure.
Regards
Mangalraj.S

Similar Messages

ECM Change no Mandatory for CS02

Dear all,
To make the ECM change no mandatory for CS01 and CS02 i have followed the below settings.
1.In OS27 - Check box included for BOM validity maintained,EC Management active,History Requirement.
2.In OS25 - BOM usage 1 & BOM status 1 - History Requirement check box is included.
3.Authorization object C_STUE_NOH is with No.
After making these changes and saving and assigning the same to that user id,logout and login.
It is working properly for CS01 but for CS02 even waring message it is not giving, directly it is allowing to chage the BOM without change no.
Can any one suggest what may be the issue or any other settings i am missing?
Thanks in advance,
Ganesh

Dear all,
I noticed one issue if the BOM is alraedy created without the change number, when i try to change that BOM it is not throwing error message as Change no. mandatory.
For that same BOM if i assign with one change no and make the necessary change and saved.
After this change it is not allowing me to change the BOM without change no.
My question is all materials BOM are already created in the system, so the user try to change the BOM in CS02 as first time without the change no it allows.
How can we restrict the user to change the BOM with change no only?
I hope my question is clear.
Thanks in advance,
Ganesh

Unable to View low level items for Phantom Assembly - Order created in APO

Hi All,
I am unable to view the sub items when I create planned orders in APO and production orders in ECC. But when the order for the same material is created in ECC, I can see all the sub items. I see that this issue is only for Phantom Assemblies.
And I cannot say that all the items in the Phantom do not appear, actually some of them do appear in BOM explosion.
For example:
Pld Ord is created for A in APO
Prd Ord for A is created in ECC
A has B, C and F as requirements
and B is phantom
B has D and F as requirements
Then my BOM explosion shows
..1 B
..2 D
..1 C
..2 D
..2 E
..1 F (This only gives the quantity required to make A)
But it should also list how much of F (..2 F) is required to make B.
Where as it comes up in ECC.
Do I need to change the material settings for Phantom or is it just the UOM that is creating an issue?

Hi All,
I am unable to view the sub items when I create planned orders in APO and production orders in ECC. But when the order for the same material is created in ECC, I can see all the sub items. I see that this issue is only for Phantom Assemblies.
And I cannot say that all the items in the Phantom do not appear, actually some of them do appear in BOM explosion.
For example:
Pld Ord is created for A in APO
Prd Ord for A is created in ECC
A has B, C and F as requirements
and B is phantom
B has D and F as requirements
Then my BOM explosion shows
..1 B
..2 D
..1 C
..2 D
..2 E
..1 F (This only gives the quantity required to make A)
But it should also list how much of F (..2 F) is required to make B.
Where as it comes up in ECC.
Do I need to change the material settings for Phantom or is it just the UOM that is creating an issue?

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to forbid any further changes for PO (QTY and price ) after it has been

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh

How to forbid any further changes for PO (QTY and price )?

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Better to post this in logistic forum.
THere will be some config option to do so but normal FI perosn would need to dig deep, a MM perosn should answer quickly.
Reg
Hein

If i made any changes for one employee means it get reflect for others

Dear friends..
I am Abaper, i am in Support phase, i am facing one HR issue. kindly give me some idea to solve.
i have 2 employee number 2025 (VIJAYAN.M) and 2925 (VIJAYAN.M). in this both case employee name is same..
if i made any changes for employee 2025 infotype (for eg bank details) means, 2925 also get reflect the same changes vice versa..
Kindly give me some idea
Regards
Deva

Hi! Deva,
As you are ABAPer , and if you are doing it through some programing , then you must have getting same problem for all those employees who have similarity in their name or other,
so, please check or debug what criteria you have given for search ,for changing/updating bank key field,
check, it should be perner base not name base or any other.
Please check and revert so that we try to resolve.
Check one thing that is it only problem with bank key any other infotype also.
*Sneha.

Fast change for statistical delivery date in me21n

hi
need fast change for statistical delivery date in me21n
in me21n when i enter on to fast change screen i doesn't find statistical delivery date
can anyone tell me the process
thanks

Dear Anudeep,
You cannot change this via "Fast Change".
Please see the usage of this field.
Calculation of the delivery time is an element in the determination of a vendor's adherence to delivery dates (that is, the vendor's delivery timeliness, or on-time delivery performance) in MM Vendor Evaluation.
If it becomes known that the vendor can only deliver ordered goods some days later than originally stipulated, for instance, you can change the delivery date accordingly for materials planning and control purposes. However, the statistics-relevant delivery
date remains unchanged.
As a result, the vendor's "on-time delivery performance" score worsens. At the same time, it is ensured that materials planning and control works on the basis of the right date.
Regards,
ian, Wong Loke Foong

When I bought my iPhone 5s I set up the email account for iCloud with a Shaw Cable address. Shaw was my ISP. I changed ISP's which rendered my iCloud email account as useless. I did reset my AppleID but it didn't change for iCloud. How can I change?

Ok so now I right the novel. Haha.
I bought my iPhone 5s and set up the AppleID for iCloud to be the same as the Apple ID I already used for iTunes and the App store. I was using @shaw.ca as part of the emaill address. I changed my ISP to save money so had to change the Apple ID. I had no issues changing it for iTunes and the App store, but it wouldn't change for iCloud. I don't recall the password and can't have it sent to me as that address does not work any longer.
What do I do to get my AppleID for iCloud working again?

Yes, you understood correctly. From your explanation, you created your hotmail.ca ID by revising the shaw.ca ID. Given that, you should perform the steps listed in my original post:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless using iCloud Photo Library). When finished goThen go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

How do I close multiple files in Preview on OSX10.8 without having to click on "Revert Changes" for every file?

I opened, say, 100 PNG files that were saved in a landscape format. So I selected all files, typed Cmd+L (to rotate left), and then viewed them for a while. After I was finished, I tried to close all of them at once, but found I had to click on "Revert Changes" for every file?
In Snow Leopard, an option would come up allowing you to discard changes for ALL open files. Here, I cannot seem to find that option (if it even exists). Does anyone have an idea?

From the menu bar, select
 ▹ System Preferences... ▹ General ▹ Ask to keep changes when closing documents: Off

How to find the when the password is changed for a system User

Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan K

Vijayaraghavan Krishnan wrote:
Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan KThe only way to implement an Oracle Audit

HT201304 Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you

Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you
i have ibad mini
and iphone4
laptop sony
can you sent for me the anser

Changing Account Information > http://support.apple.com/kb/HT1918

TS4088 why is there a limit on 3 years? it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today :(

it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today

Hey Clintonfrombirmingham
I called Apple technical support in Denmark, but with no positive reply.
She couldn't do anything, and said that They had sent a recall Email about the problem and with their offer to repair the Macbook Pro, but I'd never recieved an Email about the problem. She wasn't in power to make an exception. It can't be true that i paid a lot of money, for a product that can't barely stand on its own feets, Apple didn't tell me that the product I was about to buy, would restart every 5 minute. and now when they know the problem, they wont repair it? it just don't make sense for me. If a car seller discovers that all the brakes in a car he had sold, will crash after some years he will call all the cars back to repair no mater what. i just don't understand how Apple will make good service for their custumers, by extending the warranty from 2 to 3 years, but wont take the computers there is a little bit to old, 4 months will make the difference. i can't believe it.
What can i do now?
best regards Oskar

I have been buying music n tones for my iphone but since i change for the iphone 5 none of the old staff are in my new one eve i have safe it on icloud i just got my contact nothing else

i have been buying music n tones for my iphone but since i change for the iphone 5 none of the old staff are in my new one eve i have safe it on icloud i just got my contact nothing else i need some one helpe wt this issue cus i spend money and thing that i cant have back

adkennon wrote:
And maybe you don't talk to too many people but I've been on many forums on different websites where people have had similar problems and a lot of people in the store were having battery problems where they were draining too fast. What I learned is that all the people who did not download the updates are good. There phone is working the same. The people who have, they're having battery problems
I have downloaded every update and my battery life is better than any previous iPhone I have ever owned. I see posts from hundreds of people every day, and this is not a commonly reported problem. While there are a few random reports of battery problems, it is no more than I have seen for any other model or any other version of iOS in almost 8 years. Usually problems of rapid battery drain can be traced to bad apps (FaceBook is the worst offender) or corrupt data being synced from iCloud or other sources (gmail, Windows Live, Yahoo, etc).
The simple test is to restore the phone as New. Do not create any email accounts. Do not install any apps. Do not enable FaceTime or iMessage. Do not enable Twitter or any other social networking app. Use it for a day and check the battery usage. You will find that it is working well.
And also see this: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain. It is the best treatise I have seen on the subject of battery usage.

Infotype screen headers needs to be changed for all the infotypes

Hi Guys,
This would be for a global implementation question.
For the US for a particular region, the screen header needs to be changed for all the infotypes.
The existing field (in the infotype header) is Employee Group which needs to be replaced with employment status.
The know how to change the headers but my question is STAT2 exists in IT 0000 but does not exist in 0001, 0002 0007.........etc
When i go to Table T588J to add an entry , Screen Header 42......,
I get an error " No Field STAT2 exists for infotype 0001"
No field STAT2 exists for infotype 0001.
Message no. PG811
Diagnosis
No STAT2 field exists for infotype 0001.
Procedure
Please contact your system administrator.
Procedure for System Administration
In Customizing, determine the incorrect entry in Personnel
Administration in the Header structure per infotype view, step " Determine infotype header and correct it
I would like to have some inputs from you guys ..... Any Suggessions...
Thanks,
Aastha

Hi Aastha,
Correct me if I am wrong.
First you need to maintain the header in T588J.
Screen header of an infotype is defined in view V_582A_B. We can define one screen header for employee and another for applicant in view V_T588I. The header modifier selected from view V_T588I has a definition in table T588J, which finally gets shown on the screen.
Depending on the transaction class (A = Personnel Administration, B = Recruitment) and the country grouping, a header modifier is assigned to the infotype header in the u201CHeader Modificationu201D view V_T588I.
For example like
Screen Header / Tr. Class / Header modifier
00 / A / 60
In the view u201CHeader Structure per Infotypeu201D (V_582A_B), a header has been assigned to every infotype. It also determines whether the data is valid from the system date or the start date of the infotype record
Hope this is useful.
Regards
RK

ECM changes for Phanthom assembly

Similar Messages

Maybe you are looking for