Ecm comp module

hi everyone we are implementing enterprise compensation management in 4.7 version without MSS, i did the configuration for the plans offered and set the guidelines correctly,but for the salary survey results and the job evaluation i havent changed what is there in the earlier compensation management we are using, now the question is when i am trying to generate the report create compensation process records iam getting the message this employee does not have salary structure acc to the basic pay 0008 and also cannot calc the comp ratio with that i get the document paygrade structure not assigned to the basic pay, now the connection for the jobpricing thru Business server pages is not given is there any way we can generate the report succesfully. also i could not see the report generate compensation program records in easy access its just not there, is it because of the 4.7 version. PLZ can anyone help me in this as we are approaching the deadline thanks in advance.
laureen

Kevin,
Thanks for your response. However, I do not believe this is a configuration issue since we have almost 18,000 correct 0759 infotypes. The ones that have blank Calculation Base and Currency (approx 10) had correct values before being changed by the supervisor (as confirmed by the Change Log).
Further investigation has determined that the system will correct these infotypes when the Supervisor goes in for additional work on his/her org if the status is In Planning. It also gets corrected when the Manager performs the Approval or Rejection step.
So, at this time we will just monitor and correct via PA30, if needed.
Thanks.
Sam

Similar Messages

ECM - Compa Ratio calculation

Hi ,
In an Abap program in R/3, how can I calculate the Compa Ratio ? Can I use a standard function module for that ? ECM is doing it for the portal ECM I-view's .
Thank You .

Hi Check this FM HR_ECM_CALC_COMPA_RATIO and SAP provides in the std iviews. Select an Emp while doing the Comp Planning. There you can see your emp Com Ratio eligibilty

ECM - Comp process (IT0759) Calc Base and Currency changed

We just went live with ECM (26-Feb-2007). I have found several instances where the IT0759 was created correctly but now the Calculation Base is zero and the Currency is blank. A review of the change log shows the change from a correct non-zero Calc Base and the appropriate Currency. The change log shows the record changed by someone that has only access via MSS - no R/3 GUI access (no PA30 authority). The same change log entry shows the status changed from In Planning to Submitted. We have not written any customized code related to the Comp Planning iView other than add some columns (via V_TWPC_COL).
Any ideas?
Thanks.
Sam

Kevin,
Thanks for your response. However, I do not believe this is a configuration issue since we have almost 18,000 correct 0759 infotypes. The ones that have blank Calculation Base and Currency (approx 10) had correct values before being changed by the supervisor (as confirmed by the Change Log).
Further investigation has determined that the system will correct these infotypes when the Supervisor goes in for additional work on his/her org if the status is In Planning. It also gets corrected when the Manager performs the Approval or Rejection step.
So, at this time we will just monitor and correct via PA30, if needed.
Thanks.
Sam

Enterprise comp module

hello everyone
i am trying to create compensation process records for the plan comp plans which are in category SALARY ADJUSTMENT and it is giving me an error message SALARY STRUCTURE not there for this employee in basic pay record
anyone has any idea.

Hi ,
Check this
https://fortress.wa.gov/dop/portal/irj/portalapps/com.sap.portal.pdk.documentation.howtodevelopmyportalcomponent/docs/example1apc.html
Thanks and Regards,
gopal.sattiraju

Enterprise Compensation Management - Mass date change of IT 0759

We run ECC 5.0 SP45 (for HR)
We currently use the Enterprise Compensation Management (ECM) process for our Merit Increases and Bonus assignments.
This year, at the end of the process (meaning that everyone is in Approved status on IT 0759), Management decided to change the effective date of the Merit Increases.
Does anyone have a suggestion (other than create a bdc session) that would allow me to mass change the effective date of this particular comp. review item on IT 0759, without impacting the bonus review item?

Hi Laural,
Instead of BDC, you can use the ECM function modules.
Get the infotype data through HR_ECM_READ_INFOTYPE
and change the data through HR_ECM_MODIFY_INFOTYPE.
And the BEGDA and ENDDA in 759 would be the same as of the payment date. So you would be changing both dates here to the new payment date.
I cannot think of any other alternative solution.
Hope this helps.
Cheers,
Subbu

7942G IP phone does not upgrade and does not accept locale

Hello everyone!
I stumbled upon a rather strange behavior on a CP-7942G IP phone. It is a new phone, which I have myself unpacked from the box, along with 2 others.
Now, the problem is, this particular phone did not load the user-locale, specified in the telephony-services config on the CUCME and did not display the time correctly:
cnf-file location flash: cnf-file perphone user-locale RU load CME-locale-ru_RU-Russian-7.0.1.1.tar user-locale 2 U1 RU network-locale RU
While trying to debug what's going on, I eventually unpacked a second phone (same model) and got the same result: the user-locale was English, ASCII. I have downloaded the latest firmware update from the Cisco.com website (version 42.9.3.1.SR2.1S as opposed to previous 42.8.4.2S). Changed the config and restarted the second phone. I has updated it's firmware, restarted and got all settings correctly (Russian, UTF-8, display time).
The first phone though - the one it has all started with - still has the same problem. I tried to factory-reset it during it's power-on cycle, it tried to update, but looks like it didn't. This is what is shows in the Device Information section on the web-interface:
App Load ID jar42sccp.8-4-1-23.sbn Boot Load ID tnp42.9-3-1-57.bin Version SCCP42.8-4-2S.bin
Version SCCP42.8-4-2S
I'm not a Cisco pro, but looking in the console logs it seems that the phone does try to apply the locale settings, but reverts to default for some reason (look for text in BOLD):
|=== Syslogd === Thu Sep 26 10:13:42 2013
====================================================
NOT 10:13:42.736527 JVM: Startup Module Loader|cip.midp.rms.l:? -   loaded entry: _cip_properties.db=/flash0/RMS/appdb/_cip_properties.db
NOT 10:13:42.737816 JVM: Startup Module Loader - Deletion of file Successful/flash0/RMS/appdb/_cip_properties.dbk
NOT 10:13:42.739051 JVM: Startup Module Loader - Deletion of file Successful/flash0/RMS/appdb/_cip_properties.dbk
ERR 10:13:44.409247 JVM: Startup Module Loader|SystemManager:n/a - Encountered Property Exception while getting: device.system.targetmodules
NOT 10:13:44.483161 JVM: NativeIO assumed to be integrated into the VM
DBG 10:13:45.112916 lcd_open: return success!
NOT 10:13:47.776918 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Monospace.font size=13 sty
NOT 10:13:47.777555 JVM: leFlags=0 tabWidth=0 tabTol=0
NOT 10:13:47.803214 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Monospace.font size=17 sty
NOT 10:13:47.803814 JVM: leFlags=0 tabWidth=0 tabTol=0
NOT 10:13:47.855490 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Unicode.font size=19 style
NOT 10:13:47.856090 JVM: Flags=0 tabWidth=0 tabTol=0
NOT 10:13:47.906921 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Unicode.font size=17 style
NOT 10:13:47.907565 JVM: Flags=0 tabWidth=0 tabTol=0
NOT 10:13:47.958760 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Unicode.font size=18 style
NOT 10:13:47.959358 JVM: Flags=0 tabWidth=0 tabTol=0
NOT 10:13:48.009978 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Unicode.font size=15 style
NOT 10:13:48.010602 JVM: Flags=0 tabWidth=0 tabTol=0
WRN 10:13:48.160504 JVM: Startup Module Loader|Skin:? - Font reference not found for UIComponent=kemtext
NOT 10:13:48.317399 JVM: MediaTermination assumed to be integrated into the VM
NOT 10:13:48.821965 JVM: libMT:start SignOn()
NOT 10:13:48.824926 JVM: *** VIEO should already be running. NO? Start "/ubin/vieo &" now ***
NOT 10:13:48.825972 JVM: libMT: send _MTStart...
NOT 10:13:48.831661 JVM: LibMT (vieoProcess.c): registered VIEO callbacks
DBG 10:13:49.820548 audev: audioHwInit,,,
DBG 10:13:49.820933 audev: audioHwInit.
NOT 10:13:49.886879 DSP: _dspdvrStart ok, DSP bootup completed successfully
NOT 10:13:49.894065 DSP: DSP Tone/Ring DSP initialization completed successfully
NOT 10:13:49.895646 DSP: dspdvrinitEnableAudioOutput enabled = 1
NOT 10:13:49.896197 DSP: DSP INIT-*** DSP_STATE_READY***
NOT 10:13:49.898130 JVM: LibMT: MediaTerminationStart OK!
NOT 10:13:50.010519 JVM: Startup Module Loader|ComponentController:? - Initializing MVC comp module's trace mechanism
NOT 10:13:50.123210 JVM: TftpNative assumed to be integrated into the VM
NOT 10:13:50.574189 JVM: HTTPService assumed to be integrated into the VM
WRN 10:13:50.879507 SECD: WARN:getCertInfo: ** phone has no LSC
NOT 10:13:52.372683 DSP: configurationNumber 1, enabled 0
NOT 10:13:52.379534 DSP: mtSetDeviceBandwidth: Wideband Headset - deviceWideband=0
NOT 10:13:52.382165 DSP: mtSetDeviceBandwidth: Wideband Handset - deviceWideband=2
NOT 10:13:52.384033 DSP: mtSetG722Codec: g722enable=0
NOT 10:13:52.402407 DSP: configurationNumber 0, enabled 0
NOT 10:13:53.353620 JVM: ENTERING loadSystemProperties
NOT 10:13:53.355397 JVM: EXITING loadSystemProperties
WRN 10:13:53.451585 JVM: Startup Module Loader - *******MIDlets Not allowed in REL load*******
NOT 10:13:53.452824 JVM: Startup Module Loader|cip.midp.midlet.MIDletManager:? - Initializing MIDletManager ...
NOT 10:13:53.454023 JVM: Startup Module Loader|cip.midp.midlet.MIDletManager:? - Initializing PushRegistry ...
NOT 10:13:53.950401 CDP-D: configSelectVLAN: 3 OP_USE_CDP:2 oper:101 cdp:101 lldp:4096 admin:4096 mac:0:25:83:85:73:18
NOT 10:13:53.951035 CDP-D: CDP OP: clear cross ref
NOT 10:13:53.951487 CDP-D: getCdpExtaInfo: OP:2 Cos:0 Trust:0 lldp.idxOfInterest:-1
WRN 10:13:53.952071 CDP-D: cdpSetCos T:0 C:0
NOT 10:13:53.952540 CDP-D: CosTrust: 0 0
NOT 10:13:53.958093 CDP-D: vvlan changed --> New:101 old:4096 101
ERR 10:13:53.958658 CDP-D: setVVLANConfig VVLAN CHANGED --> NEW:101 OLD:4096 101
NOT 10:13:53.963511 CDP-D: vlan Configured --> New:100 old:4096 :100
NOT 10:13:53.964616 CDP-D: Sent SIGNINFO & SIGIPCFG
NOT 10:13:53.965261 CDP-D: cdpSetDhcpEnableFlg: SIGNINFO
NOT 10:13:53.967656 JVM: setSystemProperty() name=microedition.hostname value=SEPD0C789154FDC
NOT 10:13:53.969538 JVM: setSystemProperty() name=microedition.locale value=en
NOT 10:13:53.971370 JVM: setSystemProperty() name=microedition.encoding value=ASCII
NOT 10:13:53.972995 JVM: setSystemProperty() name=microedition.platform value=CP-7942G/7.0.1
NOT 10:13:53.974623 JVM: setSystemProperty() name=com.cisco.device.settings.config.userid value=
NOT 10:13:54.031701 JVM: Startup Module Loader|cip.midp.pushregistry.f:? - Starting MIDP PushRegistry ...
NOT 10:13:54.032873 JVM: Startup Module Loader - Deletion of file Successful/flash0/RMS/appdb/MAP1
NOT 10:13:54.034091 JVM: Startup Module Loader|cip.midp.pushregistry.f:? - MIDP PushRegistry started successfully.
NOT 10:13:54.035283 JVM: Startup Module Loader|cip.midp.midlet.MIDletManager:? - Initializing MIDP MemberFilter ...
NOT 10:13:54.036494 JVM: Startup Module Loader|cip.midp.midlet.MIDletManager:? - MIDletManager initialized.
NOT 10:13:54.259788 JVM: Creating new StateMachineThread
NOT 10:13:54.409562 PAE: SIGIPCFG received...
WRN 10:13:54.484755 SECD: WARN:getCTLInfo: ** phone has no CTL
WRN 10:13:54.488679 SECD: WARN:getCTLInfo: ** phone has no CTL
NOT 10:13:54.497820 DHCP: DHCP enabled...
NOT 10:13:54.499483 DHCP: dhcpSendReq: status 0x12300000
NOT 10:13:54.500511 DHCP: Sending Request...
ERR 10:13:54.503878 INETD: Local connect failed: 2
NOT 10:13:54.526871 CDP-D: catchipcfg:getdhcpinfo IP:0 domain: chngVal:0
NOT 10:13:54.528288 CDP-D: catchipcfg:getdhcpinfo IP:0 domain: chngVal:0
NOT 10:13:54.529090 PAE: SIGIPCFG received...
NOT 10:13:54.530615 DHCP: Enable
NOT 10:13:54.537357 DHCP: dhcpSendReq: status 0x12300000
NOT 10:13:54.537887 DHCP: Sending Request...
NOT 10:13:54.538902 DHCP: ACK received
NOT 10:13:54.539424 DHCP: Succeeded
NOT 10:13:54.541514 ESP: send ADMIN, logging = 1, shell = 0, ipconfig = 1
NOT 10:13:54.545277 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:54.552395 DHCP: IP Address -- 10.80.129.12
NOT 10:13:54.552928 DHCP: Subnet Mask - 255.255.255.128
NOT 10:13:54.553372 DHCP: Default Gwy - 10.80.129.1
NOT 10:13:54.576800 CDP-D: catchipcfg:getdhcpinfo IP:a50810c domain: chngVal:1
NOT 10:13:54.578452 PAE: SIGIPCFG received...
NOT 10:13:54.592996 tftpClient: request server 1 --->
NOT 10:13:54.665767 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:54.666679 ESP: server 0 = 10.80.129.1
NOT 10:13:54.670348 tftpClient: request server6 0 ---> ::
NOT 10:13:54.674687 tftpClient: request server 1 --->
NOT 10:13:54.675609 ESP: server 1 =
NOT 10:13:54.677936 ESP: send ADMIN, logging = 1, shell = 0, ipconfig = 1
NOT 10:13:54.683752 tftpClient: request server6 1 ---> ::
ERR 10:13:54.689776 JVM: GETHOSTBYNAME: Empty Parameter
WRN 10:13:54.719514 JVM: Startup Module Loader|NetUtil.traceIPv4DNSErrors:? - DNS Unknown Host
NOT 10:13:54.724673 SECD: updateCTL: starting CTL update
NOT 10:13:54.726696 SECD: ctlRequestFile: Socket 7 connected to /usr/tmp/tftpClientSock
NOT 10:13:54.727408 SECD: ctlRequestFile: Request CTLSEPD0C789154FDC.tlv
NOT 10:13:54.729751 tftpClient: tftp request rcv'd from /usr/tmp/ctlSock, srcFile = CTLSEPD0C789154FDC.tlv, dstFile = /usr/tmp/CTLFile.tlv
NOT 10:13:54.734219 tftpClient: auth server - tftpList[0] = ::ffff:10.80.129.1
NOT 10:13:54.734742 tftpClient: look up server - 0
WRN 10:13:54.736310 SECD: WARN:lookupCTL: CTL update in progress, no old CTL, assume TFTP NONSECURE
NOT 10:13:54.738353 tftpClient: secVal = 0xa
NOT 10:13:54.738948 tftpClient: ::ffff:10.80.129.1 is a NONsecure server
NOT 10:13:54.739405 tftpClient: temp retval = SRVR_NONSECURE, keep looking
NOT 10:13:54.739866 tftpClient: retval = 10
NOT 10:13:54.740746 tftpClient: Non secure file requested
NOT 10:13:54.749039 TFTP: [31]:Requesting CTLSEPD0C789154FDC.tlv from 10.80.129.1
NOT 10:13:54.752921 TFTP: [31]:Error --> No such file
NOT 10:13:54.758291 SYSMSG: pid 31 (/sbin/tftpd) Normal Exit, status = 2
INF 10:13:54.758326           runtime = 0.010 secs
INF 10:13:54.758344          user cpu = 0.001067950 secs
INF 10:13:54.758361        system cpu = 0.003620740 secs
INF 10:13:54.758374    child user cpu = 0.000000000 secs
INF 10:13:54.758388     child sys cpu = 0.000000000 secs
INF 10:13:54.758406    sys interrupts = 0.000427430 secs for 6 interrupts
INF 10:13:54.758427 total cpu = 0.004688690 secs ( 0% utilization )
NOT 10:13:54.761297 SECD: ctlRequestFile: tftp Status 2 rcv'd
NOT 10:13:54.762017 SECD: updateCTL: finished CTL update
ERR 10:13:54.762581 SECD: EROR:updateCTL: ** had NO CTL and CTL tftp FAILED** tftp-err 2
NOT 10:13:54.765755 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:54.766486 ESP: server 0 = 10.80.129.1
NOT 10:13:54.768900 tftpClient: request server 1 --->
NOT 10:13:54.769575 ESP: server 1 =
WRN 10:13:54.788934 SECD: WARN:getCTLInfo: ** phone has no CTL
NOT 10:13:54.801182 tftpClient: tftp request rcv'd from /usr/tmp/tftp, srcFile = SEPD0C789154FDC.cnf.xml, dstFile = /usr/ram/SEPD0C789154FDC.cnf.xml
NOT 10:13:54.803072 tftpClient: auth server - tftpList[0] = ::ffff:10.80.129.1
NOT 10:13:54.803598 tftpClient: look up server - 0
WRN 10:13:54.805232 SECD: WARN:lookupCTL: ** no CTL, assume TFTP NONSECURE
NOT 10:13:54.807172 tftpClient: secVal = 0xa
NOT 10:13:54.807773 tftpClient: ::ffff:10.80.129.1 is a NONsecure server
NOT 10:13:54.808235 tftpClient: temp retval = SRVR_NONSECURE, keep looking
NOT 10:13:54.808678 tftpClient: retval = 10
NOT 10:13:54.809110 tftpClient: Secure file requested
NOT 10:13:54.809523 tftpClient: Non secure file approved -- SEPD0C789154FDC.cnf.xml
NOT 10:13:54.816938 TFTP: [7]:Requesting SEPD0C789154FDC.cnf.xml from 10.80.129.1
WRN 10:13:54.822003 SECD: WARN:getCTLInfo: ** phone has no CTL
WRN 10:13:54.825845 SECD: WARN:getCTLInfo: ** phone has no CTL
NOT 10:13:54.835047 TFTP: [7]:Finished --> rcvd 1456 bytes
NOT 10:13:55.010336 SECD: clearTFTPList: cleared all TFTP entries
NOT 10:13:55.046228 JVM: VendorConfig - logging display == 1
NOT 10:13:55.047554 JVM: VendorConfig - logging display, theValue == 17
NOT 10:13:55.169337 JVM: setSystemProperty() name=microedition.encoding value=utf-8
NOT 10:13:55.171804 JVM: setSystemProperty() name=microedition.locale value=RU
ERR 10:13:55.237375 JVM: Startup Module Loader|cip.cfg.r:? - Delete of sshUserInfo file failed
ERR 10:13:55.238704 JVM: Startup Module Loader|cip.setg.ScreenSaveProperty:? - Config file field <displayOnTime> is incorrectly formatted. Defaulting.
ERR 10:13:55.240553 JVM: Startup Module Loader|cip.setg.ScreenSaveProperty:? - Config file field <displayIdleTimeout> is incorrectly formatted. Defaulting.
NOT 10:13:55.246502 SECD: setSecMode: sec mode set to NONE (was NONE)
NOT 10:13:55.263415 JVM: setTimeZone tz:Russian Standard/Daylight Time ctz:Europe/Moscow
NOT 10:13:55.595116 SECD: clearSRSTList: cleared all SRST entries
ERR 10:13:55.646423 JVM: GETHOSTBYNAME: Empty Parameter
WRN 10:13:55.699101 SECD: WARN:cancelCapfOp: CAPF not in use, user cancel ignored
NOT 10:13:55.699692 SECD: clearCapfList: CAPF table cleared
ERR 10:13:55.702675 JVM: GETHOSTBYNAME: Empty Parameter
ERR 10:13:55.711673 SECD: EROR:addCapfEntry: phone has no CTL, can't use CAPF
WRN 10:13:55.724535 JVM: Startup Module Loader|NetUtil.traceIPv4DNSErrors:? - DNS Unknown Host
ERR 10:13:55.725747 JVM: Startup Module Loader|cip.sec.CapfProperty:? - Failed to resolve Capf Ipv4 Address with hostname
ERR 10:13:55.727617 JVM: Startup Module Loader|cip.sec.CapfProperty:? - dns failed previously.will resolve it now
WRN 10:13:55.728964 JVM: Startup Module Loader|NetUtil.traceIPv4DNSErrors:? - DNS Unknown Host
ERR 10:13:55.730207 JVM: Startup Module Loader|cip.sec.CapfProperty:? - Failed to resolve Capf Ipv4 Address with hostname
NOT 10:13:55.753975 SECD: setSecMode: sec mode set to NONE (was NONE)
NOT 10:13:55.785279 JVM: Startup Module Loader - Deletion of file Successful/usr/ram/SEPD0C789154FDC.cnf.xml
NOT 10:13:55.786489 JVM: Startup Module Loader|cip.cfg.r:? - DELETE ConfigFile:(ram/SEPD0C789154FDC.cnf.xml)WAS SUCCESSFUL
NOT 10:13:55.788171 INETD: Set IP mode 1
NOT 10:13:55.788705 INETD: Requestted IP mode is same as current mode
NOT 10:13:55.789870 CDP-D: cdpSetRepeater 11
NOT 10:13:55.790704 CDP-D: set pc vvlan access --> 26
NOT 10:13:55.823622 CDP-D: catchipcfg:getdhcpinfo IP:a50810c domain: chngVal:1
NOT 10:13:55.828991 ESP: send ADMIN, logging = 1, shell = 0, ipconfig = 1
NOT 10:13:55.830112 DNS: SIGHUP received...
NOT 10:13:55.832373 PAE: SIGIPCFG received...
NOT 10:13:55.841392 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:55.842016 tftpClient: tftp request rcv'd from /usr/tmp/tftp, srcFile = User_Define_1/mk-sccp.jar, dstFile = /usr/ram/L10N-1584653765
NOT 10:13:55.847011 tftpClient: auth server - tftpList[0] = ::ffff:10.80.129.1
NOT 10:13:55.847529 tftpClient: look up server - 0
WRN 10:13:55.849117 SECD: WARN:lookupCTL: ** no CTL, assume TFTP NONSECURE
NOT 10:13:55.851181 tftpClient: secVal = 0xa
NOT 10:13:55.851781 tftpClient: ::ffff:10.80.129.1 is a NONsecure server
NOT 10:13:55.852235 tftpClient: temp retval = SRVR_NONSECURE, keep looking
NOT 10:13:55.852654 tftpClient: retval = 10
NOT 10:13:55.853080 tftpClient: Secure file requested
NOT 10:13:55.853491 tftpClient: Non secure file approved -- User_Define_1/mk-sccp.jar
NOT 10:13:55.861589 TFTP: [4]:Requesting User_Define_1/mk-sccp.jar from 10.80.129.1
NOT 10:13:55.865280 TFTP: [4]:Error --> No such file
NOT 10:13:55.870648 SYSMSG: pid 4 (/sbin/tftpd) Normal Exit, status = 2
INF 10:13:55.870685           runtime = 0.010 secs
INF 10:13:55.870703          user cpu = 0.001025390 secs
INF 10:13:55.870720        system cpu = 0.002738420 secs
INF 10:13:55.870733    child user cpu = 0.000000000 secs
INF 10:13:55.870747     child sys cpu = 0.000000000 secs
INF 10:13:55.870765    sys interrupts = 0.000473360 secs for 6 interrupts
INF 10:13:55.870786 total cpu = 0.003763810 secs ( 0% utilization )
NOT 10:13:55.907442 JVM: setSystemProperty() name=microedition.encoding value=ASCII
NOT 10:13:55.909263 JVM: setSystemProperty() name=microedition.encoding value=ASCII
NOT 10:13:55.954262 JVM: setSystemProperty() name=microedition.locale value=en
NOT 10:13:55.956112 JVM: setSystemProperty() name=microedition.locale value=en
WRN 10:13:55.974314 JVM: Startup Module Loader|cip.l10n.UserLocaleProperty:? - Unable to process LocaleProperty 'device.settings.config.localization.userlocale'
NOT 10:13:55.993687 tftpClient: request server 1 --->
NOT 10:13:56.012450 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:56.013069 tftpClient: tftp request rcv'd from /usr/tmp/tftp, srcFile = United_States/g3-tones.xml, dstFile = /usr/ram/L10N-61391065
NOT 10:13:56.025036 ESP: server 0 = 10.80.129.1
NOT 10:13:56.036772 tftpClient: auth server - tftpList[0] = ::ffff:10.80.129.1
NOT 10:13:56.037342 tftpClient: look up server - 0
WRN 10:13:56.039157 SECD: WARN:lookupCTL: ** no CTL, assume TFTP NONSECURE
NOT 10:13:56.041548 tftpClient: secVal = 0xa
NOT 10:13:56.042149 tftpClient: ::ffff:10.80.129.1 is a NONsecure server
NOT 10:13:56.042608 tftpClient: temp retval = SRVR_NONSECURE, keep looking
NOT 10:13:56.043031 tftpClient: retval = 10
NOT 10:13:56.043464 tftpClient: Secure file requested
NOT 10:13:56.043876 tftpClient: Non secure file approved -- United_States/g3-tones.xml
NOT 10:13:56.075611 TFTP: [3]:Requesting United_States/g3-tones.xml from 10.80.129.1
NOT 10:13:56.079347 TFTP: [3]:Error --> No such file
NOT 10:13:56.084690 SYSMSG: pid 3 (/sbin/tftpd) Normal Exit, status = 2
INF 10:13:56.084726           runtime = 0.030 secs
INF 10:13:56.084744          user cpu = 0.001016140 secs
INF 10:13:56.084761        system cpu = 0.004127440 secs
INF 10:13:56.084774    child user cpu = 0.000000000 secs
INF 10:13:56.084788     child sys cpu = 0.000000000 secs
INF 10:13:56.084806    sys interrupts = 0.000648400 secs for 10 interrupts
INF 10:13:56.084827 total cpu = 0.005143580 secs ( 0% utilization )
WRN 10:13:56.152126 JVM: Startup Module Loader|cip.l10n.NetworkLocaleProperty:? - Unable to process LocaleProperty 'device.settings.config.localization.networklocale'
WRN 10:13:56.185037 SECD: WARN:lookupCTL: ** no CTL, assume UCM NONSECURE
NOT 10:13:56.201903 JVM: Adding SRST .. #valid : 1
WRN 10:13:56.205891 SECD: WARN:lookupSRST: no CTL, treat SRST as non-secure
NOT 10:13:56.211795 JVM: Done with SRST: 1
NOT 10:13:56.274791 tftpClient: request server 1 --->
NOT 10:13:56.275707 ESP: server 1 =
NOT 10:13:56.352535 tftpClient: request server6 0 ---> ::
NOT 10:13:56.359771 tftpClient: request server6 1 ---> ::
NOT 10:13:56.407633 JVM: SecureSocketImpl.create() fd=java.io.FileDescriptor@111f4 valid=true
WRN 10:13:57.135911 JVM: Startup Module Loader|cip.mmgr.ds:? - [MediaMgrSM]: Unhandled Event, State = StateOnHook Event = EventServicesTxStop
WRN 10:13:57.149565 SECD: WARN:getCTLInfo: ** phone has no CTL
WRN 10:13:57.153827 SECD: WARN:getCTLInfo: ** phone has no CTL
NOT 10:13:57.165025 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:57.178308 tftpClient: request server 1 --->
NOT 10:13:57.243532 tftpClient: request server6 0 ---> ::
NOT 10:13:57.249934 tftpClient: request server6 1 ---> ::
ERR 10:14:39.590147 NTP: Thu Sep 26 09:14:39 2013
ERR 10:14:57.374505 JVM: cvmDebug: executing - 5. Dump total obj counts in java heap
ERR 10:14:57.386075 JVM: Counted 27546 objects
ERR 10:14:57.386815 JVM: Total Heap Size:3800064
ERR 10:14:57.387491 JVM: Free Heap Size:2771660
ERR 10:14:58.370281 JVM: cvmDebug: executing - 7. Dump string value of [C instances in java heap
ERR 10:16:48.404683 JVM: cvmDebug: executing - 5. Dump total obj counts in java heap
ERR 10:16:48.419137 JVM: Counted 34953 objects
ERR 10:16:48.419359 JVM: Total Heap Size:3800064
ERR 10:16:48.419512 JVM: Free Heap Size:2329208
ERR 10:16:49.400355 JVM: cvmDebug: executing - 7. Dump string value of [C instances in java heap
WRN 10:16:52.068040 CDP-D: lldpInetdStatsRsp: port: 0
WRN 10:16:53.007959 CDP-D: lldpInetdStatsRsp: port: 1
WRN 10:16:53.947877 CDP-D: lldpInetdStatsRsp: port: 0
WRN 10:18:53.378017 CDP-D: lldpInetdStatsRsp: port: 0
WRN 10:18:55.337826 CDP-D: lldpInetdStatsRsp: port: 1
Any ideas what can be done? The phone now displays the time correctly, but the second button shows empty squares where the "Login" button should be. All the rest of the phone inteface is in English.

For some veru strange reason the problem... resolved itself.
I had to remove the phone from the Ethernet line today, because I needed it. I then re-plugged decided to re-plug it back(in about 10 minutes from the initial power off) and voila: the phone sucessfully updated itself and received the right locale...
I wish I knew what was the real problem behind this.
I did change the config on CUCME today, but I have just added a "Text to display on phones" (command "system message"). I then re-created CNF files (but I have tried that already last week).
Maybe the stars aligned in a different way today, I don't know...

Can we have Oracle HRMS Payroll in Fusion and Core HR in R12?

Hi,
Currently we are using Oracle R12.1.3 for Oracle HRMS and Oracle Financials. We are planning to implement Oracle Compensation and Payroll Modules in the near future. We are in dilemma whether to go with Oracle fusion or not for these specific modules.
We know HCM Coexistence enables us to integrate existing Oracle HR Applications with a hosted Oracle Fusion Compensation implementation. But we are nor sure about the payroll module. We need your valuable advises in proceeding with the payroll module implementation.
1. Is it possible/certified to have payroll and comp module on fusion and remaining all in R12?
2. (or) Is it good to implement payroll in R12 for now and move it to fusion in later period of time?
Please let us know your valuable inputs. Thanks in advance.
Regards,
Lakshmi

I got the answer from oracle for the above question.
It seems Oracle support only outbound interfaces from Fusion Payroll. They do not have inbound payroll interface capabilities or a payroll back feed. We would need to configure Fusion HCM along with all the prerequisite work structures, set the appropriate Payroll license, configure the Fusion Payroll country extension and implement Fusion Coexistence for HCM to maintain the data between EBS and Fusion.
It means Oracle support Fusion Payroll only when we have the Core HR setup in fusion. It answers my question.
Thank You,
Lakshmi

Pay Grade Types & Areas

Hi sapients,
I have one doubt, i.e, what is the use of Pay grade types & areas, is it similar to Payscale Groups & Levels.
Could you please help me.
Regards,Pavani.

There is no clear distinction between these two. Its more dependent on which modules you want to implement in HR. Both are same. But Pay grade (types, area, level etc) is used in the Pay structure ie T710cl where as the Pay Scale (area, types, groups, levels etc) are maintained in T510N (For annual salaries i.e. what you see in IT0008 PA side)
If you want to implement Compensation Management you have to configure the T710CL table but If you dont want to implement Comp module but you do want to go for PA/OM modules you have to configure the T510N table (i.e. Pay scale groups, types etc) to be able to default in IT0008.
Reward points if this helps
Sanghamitra

What is require to configure adobe LC server with Documentum?

Hi,
I have to configure documentum with adobe lc to store documents on server.
I will use configuration manager to configure. Please let me know the documentum parameters/credentials require to configure adobe lc with documentum when i select adobe live cycle connector for ECM on "module selection" screen.
I have never configure adobe lc with documentum. Please also post me links to understand more how documentum benefits when configured with adobe lc
Sunil Gupta

function(){return A.apply(null,[this].concat($A(arguments)))}
Please let me know the documentum parameters/credentials require to configure adobe lc with documentum when i select adobe live cycle connector for ECM on "module selection" screen
Refers to the credentials of the Documentum user who has login rights to the documentum server. To get more details about any parametrers used in Configuration Manager please use the F1 key on that screen.

Can old compensation module and ECM co-exist in SAP

Hi All,
Do you know if old Compensation module and ECM can co-exist in an SAP instance. My client is on 4.7 and they have implemented one bonus plan using the old compensation module in the past but would like to configure additional comp plans using ECM (new functionality).
Please advise if it is possible as old comp uses info types such as 380 and new ECM uses new info types 758, 759, 761 etc.
Regards,
Sanjay

Thanks Donnie !
Actually, that is what I thought.
But, if they activate ECM now, then what will happen to the old award records (compensation adjustment records) that exist in info type 360 etc. for previous year comps. Any thoughts ?
If you have any documentation on this then please do send me the url.
Regards,
Sanjay Gera

ECM - PERNR selection in Comp Planning

In MSS ECM Compensation Planning -> my first page is with the org units under me ( if me as manager) and then once I select the org unit, select 'Show Employee's and then select employees and click 'Plan'.
Question is: Suppose I had 5000 employees in the org units under me and out of those approx 100 are eligible for a particular compensation plan, then I want to see only 100 PERNRs only on my next screen i.e planning screen. Currently SAP shows all 5000 pernrs with the column status as 'Ineligible' for those 4900 employees and 'In Planning' for 100 employees.
Is it possible to achieve such filtered list, i.e the list of only employees who are eligible for the selected compensation plan ?
Thank you
Krupa Pancholi

it is definitely possible.
in my previous implementation we actually heavily controlled the list displayed on both the planning and approving screens. we had very complex logic to determine who a "planning manager" was for an employee based on if the manager had a budget amount assigned to him.
on the approving screen we had logic so that it could only be done by executives for 1 type of plan, and then another all types of other logic for another plan, like real science fiction stuff.
so controlling the list is farily easy....
under mss object and data provider: go to organizational structure views -> define org views - in this transaction you will find:
MSS_ECM_SEL_DIR     Direct Reports
MSS_ECM_SEL_LIS     Employees from Organizational Units
MSS_ECM_SEL_REV     Direct Reports
MSS_ECM_SEL_SEA     Employee Search
MSS_ECM_SEL_TRE     Employees from Organizational Structure
does the list look familiar??? it corresponds to each of the values available in your down list for ECM.
When looking at details of any of these views you will see there is a an objection selection view, example : MSS_ECM_SEL_OB1
so now to view the object selection view? go to object provider -> define object selections...
check on our example here: MSS_ECM_SEL_OB1 -> go to details of this... on this screen you see "RULES" defined.
now we are at where the magic happens.... take the first rule: MSS_ECM_SEL_RU1
go to object provider -> define rules for object selection: search on MSS_ECM_SEL_RU1
go to it's detailed screen - here you see they have the evalatuion path: SAP_MANG
well it your scenario. you will create Z views / rules across everything I just described. then instead of using an evalatuion path your z rule right here will use a custom function module. here you make it do backflips. have all bonus planning go to an HR manager? ceo does everyone? hourly managers find no results? woola...
this has to be applied to each view you want to control.
magic!

Output Module preset "Use Comp Frame Number" won't save setting

I have an Output Module Template for my DPX sequences. I have the "Use Comp Frame Number" box checked, but upon restart of AE, the setting resets itself to Unchecked. If I re-check it in the template settings, it works until I restart AE. I have tried deleting the Template and rebuilding it but no luck.
I am using the most recent AE 2014 build on Windows 7. Ideas? Thank you!

Is your Output Module Template the first template in the list (alphabetically)? There is a known issue where the Use Comp Frame Number control is not correctly remembered in this case. To work around this, rename the template so it is not the first in the list. ex., Put it at the bottom of the list or put another template (maybe a dummy template?) above it.
Please do file a bug, even though we're already aware of this the number of reports we get about any particular problem do make a difference:
http://adobe.ly/ReportBug

Comp settings vs. Output Module settings

Oh geez I hate to even ask this question:
What the heck did I do? Maybe I'm losing it here...
I've been rendering HD videos in H.264 for some time, but all of a sudden I'm getting "settings mismatch" in output module settings.
And my animations are always 1920x1080
Could somebody give me a refresher on selecting comp settings versus render settings? Please?
If I know I'm going to use output module setting of H.264, what size should my original comp be? Does comp setting have to be 1280x720? Cause I've been using 1920x1080.
I've cycled thru just about every output module setting and every render is all grainy and unusable.
Maybe I changed something somewhere and not aware of it?
My Comp Settings:
Preset: HDTV 1080 29.97
width: 1920 px
height: 1080 px
What's got me stumped is the fact that the video/graphics look so crisp and clear while editing and previewing, but rendered video is all grainy and blurry.

H.264 renders out as progressive scan, but 1920x1080 is typically upper field first for most editing applications.
What's the field order you're using? Add the comp to AE's Render Queue and check the Render Settings.
How are you viewing the rendered file? In an editing application? In a viewer?
Personally, I'd be tempted to use 1280x720, 59.94 frames/sec if I had a choice.

Standard ESS iViews for ECM module

Hi,
Regarding the compensation management module, there are several standard ESS iViews delivered by SAP:
For instance the "<i>Displaying a Total Compensation Statement</i>" in Business Package for Employee Self-Service (mySAP ERP 2004).
As we are setting up Enterprise Compensation Management, I would like to know whether these iViews will also be delivered for ECM. I have checked all Business Package documentation but did not find any standard ESS iViews for ECM.
For MSS, I have found the MSS_60_1_EN.pdf documentation which contains a lot of MSS ECM information. No ESS info unfortunately.
Thanks in advance.
MvdM

The TCS iView is only part of ESS BP and basically uses the ess/rem DC to generate the report framework that shows the output as Adobe PDF. The TCS itself is implemented in the backend with the form builder (/hrforms) - same approach as salary statement. Employees can view their salary statemetn or TCS. In ECM you have managers working with employee data and normally you don't want to display managers this type of information of their employees - but that depends off cause on your requirements. It is not too difficult to build a custom TCS service for managers and integrate it with ECM.

Standard BI Queries for SAP HR ECM module

Hello Gurus,
Can anyone list me the standard BI Queries for SAP HR ECM module? (Enterprise Compensation Module) for ECC 6.0
Any concerns greatly appreciated and rewarded..
Thanks,
Soniya Singh

http://help.sap.com/saphelp_nw70/helpdata/en/3e/0895ec8866f44cac9f1825370c88d2/frameset.htm

Ecm comp module

Similar Messages

Maybe you are looking for