ECM Error : Customizing and budget data are inconsistent for BU 50038367

Hi ,
Currently I am implementing SAP ECM.I am getting an error when I try to generate budgets for employees.
The error is :The currency setting in table T7PM2 differs from the system configuration.
Could anyone please let me know how I can resolve this issue ?
Regards,
Madhu

Hi Madhu,
Did you check the corresponding entry in table T7PM2, if the currency defined fits your curreny settings in other places?
Regards,
Li

Similar Messages

IDoc error "customer and sales area : GR could not be uniquely determined"

Hi All,
While posting some IDocs i am getting error customer and sales area : GR could not be uniquely determined even when entries are available in EDSDC table.
Please assist.

Double check your entries. Once I ended up even sending a message to SAP and turned out there was a simple typo in the table.
Also since you're saying "some IDocs" - check how exactly they are different from those that don't have this error.

Asset value date and posting date are not in same fiscal year

Hi,
Our business user has created an asset under an incorrect asset class, which he is trying to transfer to a new asset whcih was created under correct asset class. However system is restricting user with the error message "Asset value date and posting date are not in same fiscal year". Can you please advise me how we can proceed further with this error.
Regards,
Asam.

Hi,
To transfer one asset to another asset within a company code can be done through ABUMN only.
While doing this transfer you have enter the document date, posting date, and value date for the transaction, but all these dates should be in same fiscal year only.
In your case you must have been entered the dates for asset value date and posting date , and these two dates are in diff financial years.
Please make sure that both the dates are in same FY.
Hope this will fix your issue.
Thanks,
Srinu

FA-retirement-Asset value date and posting date are not in same fisc year

Hello,
I would like to post retirement in the new fiscal year but with asset value date in the previous year so that NBV is calculated correctly. It is not possible neither in ABAON nor in ABAVN with any transaction type.
I always get message 'Asset value date and posting date are not in same fiscal year'.
Is there any way how to handle this?
Thank you,
Jan

Hi,
I have tried this but the settings of our Depr keys works in the way. That if you use asset value date in the new month it will calculate depreciation for the whole month.
This means if I retire with asset value date 31.12.2008 - NBV will be calculated as at 31.12.2008.
If I retire with asset value date 1.1.2008 - NBV will be calculated as at 31.1.2009.
Thank you anyway!

Table name to find customer and which sales area he belongs to?

Table name to find customer and which sales area he belongs to?

Hi suchita,
You can find these information Sales area he belongs and all in the table of KNVV , take the customer number from customer master KNA1-KUNNR put it in KNVV-KUNNR. you can find all the sales details.
if you need more info send breaf requirement.
if helpful award the points
Regards
Ram

Customer and vendor data

Hi Colleagues,
Can you please let me know all the related tables where customer and vendor data resides.
Regards
Anuj

Hi,
Customer data tables
KNA1     Customer master
KNB1     Customer / company
KNVV     Customer sales data
KNBK     Bank details
KNVH     Customer hierarchy
KNVP     Customer partners
KNVS     Shipment data for customer
KNVK     Contact persons
KNVI     Customer master tax indicator
Vendor data tables
LFA1     Vendor master
LFB1     Vendor per company code
LFB5     Vendor dunning data
LFM1     Purchasing organisation data
LFM2     Purchasing data
LFBK     Bank details
Pls reward suitably..
Best regards,
S.Karthick

How the prodution order start and finis dates are changeing...?

Dear friends,
It was observed that one of my client's production order start and finish dates are changing frequently.
No user is claiming the responsibility, I feel very dificult to to find out who did the changes.
When I observed, it is happening for orders if we Revert the Teco, and that to for those orders which doesn't have the sale order assignment.
and some times it is not happenign for even for the orders which does not have the sale order assignment also.
Here it is having Forward type Sheduling.
Please help me how and when , the prodcuction orders start and finish dates will get changed.

Dear RS,
Plz check in AUT10, by giving t-code CO02 for order changes
in AUT10, u can track user id also
this may help you to some extent
Regards
kumar
Edited by: kumar kumar on Sep 17, 2009 8:32 AM

Basic / Scheduling dates are calculated for both main orders and Collective

How the Basic / Scheduling dates are calculated for both main orders and Collective orders?
when in master data we have given different value of in house production time for both the orders.

Hi,
The basic dates are calculated from the data mentioned in the Material Master - In-house production time days, either lot size dependent or lot size independent.
The scheduled dates are calculated from the timings maintained in the routing.
In the configuration for Scheduling parameters for the order type - Adjust scheduling - the dates can be adjusted.
Kindly revert back if you need any further clarifications.
Warm regards,
Umesh Poojari

When i did the last update my pictures got scrambled and the dates are gone

When I did the last update my pictures got scrambled and the dates are gone and there's strange numbers and letters underneath them.

It says that to download past purchases, they must done under the apple ID that was used to purchase the items. I have an original ID for my iTunes on my computer. At some point I changed my apple ID on the iTouch since that email account was deleted. So I was syncing through iTunes under a different ID then was on my iTouch. Can I do anythng about that so I can check past purchases?
Since the apps aren't in the backup, how do I transfer the apps on my iTouch to my iTunes?

Just got a new router yesterday and my husband's iphone and my ipad are asking for a guest password. Don't understand.

Just purchased a new router yesterday since ours got struck by lightning. Now my husband's iphone and my ipad are asking for guest wifi passwords. Don't understand.

Some new routers come with the standard connection as well as a guest account. The guest account can be used for when friends come over and want to use your Wi-Fi connection. You can give them the guest account password and still keep the main account password private. Make sure you are logging on to the main connection and not the guest account.

Difference between passive and active data connection mode for FTP

Hi,
Does any body have the idea of passive and active data connection mode for the transport protocol FTP.
I have one server with FTP, I have to pick the data from this FTP to XI.
What is the difference between active and passive data connection? Does XI supports both the connections?
Thanks & Regards
Katta Mohan Reddy

Hi
According to SAP Note - 821267
Q: Does the File Adapter support active data connections when connecting to an FTP server?
A: Up to and including SP14, the File Adapter exclusively uses passive data connections. Starting with SP15, active connections will be available.
Difference between active and passive,
You can definitely refer to the site mentioned by Suraj
cheers
Sameer

Consignement customer's invoice dates are fixed, but system is taking wrong

Hi All,
this is the consignement customer and for this customer invoice dates are given clearly stating as the 'end of month', but system is invoicing in the different dates. factory calender created and set and the maintenance in the customer master is also done. but why the system is creating invoice in different dates.

Hi All,
this is the consignement customer and for this customer invoice dates are given clearly stating as the 'end of month', but system is invoicing in the different dates. factory calender created and set and the maintenance in the customer master is also done. but why the system is creating invoice in different dates.

Finder date and Iphoto date are very different in some photos

I run Iphoto 9.6 on OSX Yosemite 10.10.1 with an Imac 27" of mid 2010.
Some photos have wrong date in Iphoto while the right creation date of these photos are in the finder (exif dates are always correct).
Because, i have more than four thousand pictures with wrong dates, is there a way to fix that issue easily (by a script or a utility ?). I discover when there is a difference between those two dates, it's always a difference of + 6066 days and 11 hours ??? Like that, some photos appears to be done in 2045 ???
Some body came help me ?
Many thanks in avance,

Poelger,
thanks for your interest, please let me explain it better.
I have 2 data blocks. The 1st one is a single record, non-database block, where I input some parameters, and one of these parameters is a date field. This date field will be passed via PL/SQL inside the form to compose the search criteria.
:BLK_PARAMETER.date_field receives 02/02/2009 as typed by the user, being configured as a field which receives data in date format (dd/mm/yyyy). This date is used inside a form procedure called PRC_SEARCH_CRITERIA, which mounts a variable called p_where. Please consider the code below belongs to PRC_SEARCH_CRITERIA.
p_where := 'trunc (date_field) = ''' || :BLK_PARAMETER.date_field || '''';
set_block_property ('BLOCK_BEING_QUERIED', default_where, p_where);
I ran it on Oracle Debugger and I saw p_where being mounted as:
trunc (date_field) = '02-FEB-09'
And, when my form executes an execute_query instruction, it raises FRM-40505 error. I copied this p_where value and tried to run it in Oracle SQL Developer, where the error was the same. When I edited it on SQL Developer, changing this date to '02-FEV-09' (since "february" in english is "fevereiro" in portuguese), my query ran finely. So it seems to me that Oracle Forms and database aren't configured to use the same date format, maybe they're using different language date formats.
I need to understand this behavior and act so this should not happen again; now I solved this problem in other ways, but 1st of all I would like to understand it better, so I won't repeat it. Any help will be greatly appreciated.
Best regards,
Franklin

Adding new field to Customer master sales data area sales tab

Hello everyone,
I am new to module pool so seeking some help from experts here.
I have a requirement were in I have to add a new field to the customer master (VB02) sales area data sales tab.
I found that there is no screen exit.Is there any other way of doing it?
could you please provide me with a step by step procedure of doing it.
With Regards,
Karishma.

Hi,
How did you look for screen exit? Have you also tried it in BADI? 'Coz normally, adding custom fields to a standard screen has to be implemented in exits.
I haven't worked with VB* screens yet so I can not give you a some possible exits. But you can do some debugging. I think there's an available code in the net that searches for exits/screen exit (ask Mr.Google). You can also ask him how to search BADI in debugging mode. I remember it's TCode SE24 then look for cl_exithandler class, get_instance method. Then look for exit_name variable.
Hope this helps.

Payment term and Baseline date are not appear after residual clearing

Hi Friends,
We have an issue in Payment term. Recently small changes were made in OBA3.Here they enable the option of "Payment term from invoice". the function of this is to - copy the payment term and baseline date form invoice to Partial item .Due to enable of this function after residual clearing the payment term and base line fields are get empty.
Now user want to get these fields to be updated even not changes take place in OBA3.Can you please suggest me the way, with out changes in OBA3 can we get payment term and baseline date field after residual clearing .Please suggest .
Thank you
Regards,
Dharma

Hi Julie,
Thanks for your reply..
Here the issue is, the user using Baseline date for two specific purpose.
1.Due day calculation-auditing purpose
2.Agning report
For due day calculation they recently enable the option "payment term from invoice in -OBA3".Due to active the function,system copy the payment term and baseline date from invoice to residual item.it means the residual item having baseline data as invoice date not posting date.
But for aging report purpose it has to be update posting date.
now user want to meet these both requirement .How can it possible .Please suggest.
Thank you
Regards
Dharma

ECM Error : Customizing and budget data are inconsistent for BU 50038367

Similar Messages

Maybe you are looking for