ECM - For BOM

Hi All
I have a requirement in my project, where in I have to remove the data for all the BOM that have been changed but that changes had not been made actiive or recorded through ECM.
Also I want the data of BOM for which changes has been made with the help of ECM.
The challenge here, access is only to SE16N at my project.
Please help me.
Regards

Thanks for your immediate replies my friend.
but still my problem is not resolved. Actually please note it again, I basically want to seggregate the data of changed BOM items or BOM header with or without the use of change number.
I wanted a summarised report and show it to management.
Please help, also please note there is no Abaper to help me out in this area, since we have been only in advisory area so access to production server only for display purpose.
Regards

Similar Messages

ECM for BOM issue

Dear All PP gurus,
Can you please guide me what to do in this caase please?
I have created BOM for material ZCONEGG48V has been created by error without change number
So it is valid from 20.04.2009 instead of desired 01.04.2009 .
I tried to change with Change number with date after Date valid from 20.04.2009, and I get this error message as below
Object management record cannot be generated .
Could you please tell me that what are the changes i will have to do so that this error will not come again?
Thanks,
Narayan

Dear Narayan,
You have not included the third check box against the Bill of material for the column Mgt.Rec under
object types while creating the change number.
So now goto CC02,enter the change number->click on object types>against bill of material include
the third check box for the column Mgt.Rec,save the datas.
Now you can use the change number for changing BOM.
This will solve your problem,check and come back with your queries.
Regards
Mangalraj.S

Customized report for BOM changes

Hi PP Gurus,
My client is not having ECM. he want to create one Z report for BOM changes. I checked tables MAST, STKO, STPO, CDPOS and CDHDR. In CDPOS I can see replaced component and replced quantity. But if I deleted any component or inserted any new component I can not see this in any table. Please suggest me how can I track such changes without ECM.
Jayesh Narvankar
SAP PP

Dear ,
You can try to develope a report with the help of you ABAPer with following FM /BAPI :
CSAP_MAT_BOM_MAINTAIN
CSAP_MAT_BOM_OPEN
CSAP_BOM_ITEM_MAINTAIN
CSAP_MAT_BOM_CLOSE
Refer this experts theards on this issues : Deletion of BOM item using BAPI/FM
If you need to go ahead with ECM , you refer our earlier posting in the same issue :
Changes in Production Orders
Regards
JH

Unable ot activate ECM for Master Recip - Scenario - ECR with Release Key.

Dear Friends,
We want to activate ECM for Material BOM as well as Master Recipe.
Scenario : ECR with Release Key.
We are able to activate for BOM only.
In object Screen, Master Recipe iline item is greyed out.
System : ECC 6.0 - Ehp4
Please guide.
With best Regards,
Raghu Sharma.

Hello Raghu,
It is standard SAP behaviour that ECR/ECM with release key certain items will be greyed out. So try without release key. There is a SAP note"159414" to modify this behavior.
Regards
Prasad K
Edited by: Prasad K on Jul 7, 2010 4:31 AM
Edited by: Prasad K on Jul 7, 2010 4:32 AM

Re: ECN For BOM

Dear All,
Please advice the steps involved in implementing the ECn for BOM. My requiremnt is whenever ther is any changes done to a BOM of any typye it can be tracked.
Secondly,Is it possible to restrict the user to do any changes in the BOM.
Please advice.
Regards,
Vivek

Dear Vivek Sharma,
Once doing the config settings in OS27,OS54, and having a check for the authorization object
C_STUE_NOH ,the system asks a change number while creating and changing the BOM in CS01 and
CS02 respectively.
CC05,CC07,CC60 are the reports used in standard SAP for ECM.
For exact BOM changes check this,
Check in Table STAS using BOM number.
Say For Eg:
Product is X and it's BOM number is 00002850 and it has got a component say A.
Now if you check in STAS table you will get the result like this,
STLNR STLKN AENNR LKENZ STVKN
00002850 00000001 00000001
Now Let's assume you are deleting this component A and adding a new component say B using a Change
number 50000000076.So for the same product X if you check in table STAS,then the result will be like this,
STLNR STLKN AENNR LKENZ STVKN
00002850 00000001 500000000076 X 00000001
00002850 00000002 500000000076 00000002
Which means item node 00000001 is no more present in the BOM because its marked with LKENZ = X.
I hope this will help you to understand more.
Revert back if you need any more assistance.
Regards
Mangalraj.S

Report for bom wise target and actual cost as well as qty at line item

Dear Experts,
Is there any standard tcode for bom wise target and actual cost as well as qty at line item level for the month.
there is one tcode s_alr_87013127 but user has to double click in order to get line item details.
I want to see line item wise breakup/bom wise target and cost cost as well as qty.
Thanks in advance.
regards
RK

Dear experts,
I am still looking for a revert.
regards
RK

Report for BOM materials

Dear Experts,
i have scenario which i need to capture but do not have any standard report and for that reason i am going in for Z development of the reports. please guide me so as to which field to be pulled to get the desired output.
Scenario:
We create Purchase order with a version control
1. First version has the data which act as baseline and we want to compare rest of the versions as variance
2. If the line item in PO is a subcontracting material with L- then the subcomponents will be present as a BOM
3. when i ammend the PO for the Qty the BOM items also get ammended but do not reflect in the version control - display changes
4. I want to capture the PO with each line item against which there is qty change and also the material BOM change due to qty change.
Is there any table from which i capture the data.
Pl. help me out it would be of great help
Thanks & Regards,
Farhan

Hi
the following tables might be useful
MAST
STKO - Header Table of BOM
STPO - Item Level for BOM
MAKT
regards
maniraj

The standard report for BOMs of a material with a selected period?

Hi Gurus
Is there any standard report for BOMs of a material with a selected period?

Hi,
You will have to develop a report for your requirement,
The following tables will be used for the report
MAST-WERKS
STPO-MATNR
MARA-MAKTX
STPO-BMENG
STPO-POSNR
STPO-IDNRK
STPO-MAKTX
STPO-DATUV
STPO-MENGE
STKO-MEINS
STPO-AVOAU
Regards
Merwyn

Unable to enter multiple Schedule lines for BOM material in Sales Order

Hi All,
We have a Sales Order where in which we cannot add additional schedule lines for BOM material.
The schedule lines are greyed out, user was able to add schedule lines earlier.
I have checked all assignments in VOV6, VOV7 and everything seems to be fine and no changes have been made to item category being used.
Please provide a solution for this.
PFB link in which similar situation posted in this community but the final resolution method is not discussed.
http://scn.sap.com/message/13201504#13201504
Regards,
Samiksh

Hi Samiksh,
Pls check for that particular customer, only complete delivery allowed(c) is set in the CMR or CMIR. If so, you can't enter multiple schedule lines for that customer.. it would be grayed out in the sales order schedule lines except confirmed line.
or check the problematic sales order at item level shipping tab if the par del/item is set to 'C'
With regards
S.Siva

Problem in creating a bapi for bom

hai all,
i am trying to create a bapi for bom using csap_mat_bom_create, but it am getting sy-subrc value as 1.
and displaying error message as the function module name itself.
is there any solution dor it.

Hello,
Try to use that bapi :
BAPI_MATERIAL_BOM_GROUP_CREATE
Thierry

Planning of Dependent Requirements for BOM Components in Make to Order scen

Hi Friends - I want to execute a full cycle Make to Stock Scenario with Materials planning using MRP.
The scenario will include BOM Components with Routing.
The process flow I want to execute -
1. Create a Sales Order for a Finished Product (Product should have a BOM for Production)
2. Do the product Materials Planning for the Sales Order through MD50
3. Get all the dependent material requirements (both for products as Planned Order and also for BOM Components - all the BOM components should also be planned)
4. Convert Planned Order for Product to Production Order
5. Convert Planned Orders for BOM components to Purchase Requisition
6. Confirm Production Order
To execute this I have done the following
1. I have created a Material Master data for Finished Product (FERT).
2. I have assigned Item Category Group - NORM, and General Item Category group as NORM
3. I have assigned MRP Type PD in MRP 1 View and Strategy Group 20 (Make to Order Production) in MRP 3 View.
4. Now created a Universal (Type 3) BOM for the product with one material component.
5. Now also created a Routing for the Material with two operations having PP01 a control key.
6. Now created a standard sales order for the product.
7. Executed the MD50 for the Sales Order Item.
Now where do I find the BOM components for this material in the Sales Order?
After executing the planning Run MD50 I am only getting the requirements for Product only. I can't see any dependent requirements for the BOM components.
How do I make sure that the BOM components are also planned while the product is planned?
I have checked the component Stock Requirement List - there are no requirements generated from the Sales Order Product BOM.
Pls help me on this. How to do this so that the raw material components are also planned?
Thanks
Purnendu

Hi Dhaval, Sandeep, Ashok - Thanks a lot for your replies.
I have checked the Planned Order Created through Planning Run.
If I click on the Components Tab I am getting following message
No material components were determined
Message no. 61027
Diagnosis
Until now, no BOM explosion has been carried out or no BOM has been created for this material yet.
Procedure
Either explode the bill of material for this material, or
create the components manually by processing the planned order in change mode.
If I try to explode the BOM through Header Menu - Edit> Explode BOM
I am getting the same message.
If I click on the Bill of Material Tab - I am getting the same above messge.
Ashok - I have tried both the Selection Method -
Nil - Selection by Order Quant.
1 - Selection by Explosion Date
But with no effect.
Waiting for your advice.
Thanks and warm regards
Purnendu

User exit for BOM

hello,....
problem: using BOM in VA01...for free goods material.....
I am working on user exit for BOM...I need to write a code in FV45SFCO_CONFIGURATION_SET_STM under this we have call customer funcion '003'
if we click on this we will enter in include ZXVVAU12.....In this including I need to write the code(user exit) by using XSTB table and the values in that table I have to populate in XVBAP.......for the BOM Explosion........when we use VA01......
so please tell me how can i write the code in that exit ...by getting the data from XSTB to XVBAP........by using the field STLAL (It is Alternative BOM in BOM Screen)...for example if I select '05' (stlal) BOM type.....the values in XSTB populate in XVBAP...
anyone help me on this........
Otherwise give me any other sample code for the userexit BOM so that I will learn...a lot from that....
Thanks in advance,
Madhu

Hi Madhu,
You can try something like this to read XSTB in user exits EXIT_SAPFV45S_003.
DATA: XT_XSTB LIKE STANDARD TABLE OF SDSTPOX WITH HEADER LINE.
FIELD-SYMBOLS: <XSTB> TYPE TABLE.
DATA: FIELD_NAME(30) VALUE '(SAPFV45S)XSTB[]'.
ASSIGN (FIELD_NAME) TO <XSTB>.
XT_XSTB[] = <XSTB>.
READ TABLE XT_XSTB WITH KEY STLAL = '05'.
IF SY-SUBRC = 0.
.... <--- your logic to move to VBAP
ENDIF.
Regards,
Ferry Lianto

Free good for bom material

hai i am new to sap , can any one tell me how to post free good for bom material !!

Hi,
Being a new member, one quick advice would be to search SDN and related forums before posting a new question, since this issue has been discussed many times.
To answer your question, Free Goods does not support BOM.
Please check [here|http://help.sap.com/saphelp_46c/helpdata/en/dd/55fa34545a11d1a7020000e829fd11/frameset.htm] for detailed explanation.
Regards,
Amit

More than 1 line items in bdc using table controls for BOM

Hi....
how do u update more than one line item for BOM using BDC table control.......
is there any specific command for doing that.......
hav tried d following code bt it takes the flatfile i/p FOR 2 LINE ITEMS as 2 different BOM'S.....
would appreciate ur help....plz provide code.............
REPORT zbdc4_cs01
       NO STANDARD PAGE HEADING LINE-SIZE 255.
INCLUDE bdcrecx1.
DATA : a TYPE i,
       b type i,
       c type i.
DATA : BEGIN OF it_rec OCCURS 0,
       rec(200) TYPE c,
       END OF it_rec.
DATA : BEGIN OF ctab OCCURS 0,
       matnr(18),
       werks(4),
       stlan(1),
       END OF ctab.
DATA : BEGIN OF xtab OCCURS 0,
       idnrk(18),
       menge(13),
       postp(1),
       END OF xtab.
DATA : BEGIN OF itab OCCURS 0,
       matnr(18),
       werks(4),
       stlan(1),
       idnrk(18),
       menge(13),
       postp(1),
       END OF itab.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename            = 'C:/TEST4.TXT'
      filetype            = 'ASC'
      has_field_separator = 'X'
    TABLES
      data_tab            = it_rec.
LOOP AT it_rec.
    a = strlen( it_rec-rec ).
    if a = 55.
    itab-matnr = it_rec-rec+0(18).
    itab-werks = it_rec-rec+18(4).
    itab-stlan = it_rec-rec+22(1).
    itab-idnrk = it_rec-rec+23(18).
    itab-menge = it_rec-rec+41(13).
    itab-postp = it_rec-rec+54(1).
    APPEND itab.
    elseif a > 55.
    itab-matnr = it_rec-rec+0(18).
    itab-werks = it_rec-rec+18(4).
    itab-stlan = it_rec-rec+22(1).
    itab-idnrk = it_rec-rec+23(18).
    itab-menge = it_rec-rec+41(13).
    itab-postp = it_rec-rec+54(1).
    APPEND itab.
    itab-idnrk = it_rec-rec+55(18).
    itab-menge = it_rec-rec+73(13).
    itab-postp = it_rec-rec+86(1).
    APPEND itab.
    endif.
ENDLOOP.
PERFORM open_group.
LOOP AT itab.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29N-STLAN'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RC29N-MATNR'
                                   itab-matnr.           "'3000000107'.
    PERFORM bdc_field       USING 'RC29N-WERKS'
                                   itab-werks.              "'UN02'.
    PERFORM bdc_field       USING 'RC29N-STLAN'
                                   itab-stlan.              "'1'.
    PERFORM bdc_field       USING 'RC29N-STLAL'
    PERFORM bdc_field       USING 'RC29N-DATUV'
                                  '11.08.2008'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0110'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RC29K-BMENG'
                                  '1'.
    PERFORM bdc_field       USING 'RC29K-STLST'
                                  '1'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29K-EXSTL'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0111'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29K-LABOR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0140'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSTP(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RC29P-IDNRK(01)'
                                   itab-idnrk.             "'1000000232'.
    PERFORM bdc_field       USING 'RC29P-MENGE(01)'
                                   itab-menge.              "'100'.
    PERFORM bdc_field       USING 'RC29P-POSTP(01)'
                                   itab-postp.             "'L'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0130'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSNR'.
    PERFORM bdc_field       USING 'RC29P-POSNR'
                                  '0010'.
    PERFORM bdc_field       USING 'RC29P-IDNRK'
                                  '1000000232'.
    PERFORM bdc_field       USING 'RC29P-MENGE'
                                  '100'.
    PERFORM bdc_field       USING 'RC29P-MEINS'
                                  'KG'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0131'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POTX1'.
    PERFORM bdc_field       USING 'RC29P-SANKA'
                                  'X'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0140'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSNR(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0140'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSNR(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=FCBU'.
    PERFORM bdc_transaction USING 'CS01'.
ENDLOOP.
PERFORM close_group.

Hi
Check this sample code for the Table Control in BDC:
data: fnam(20) type c.
move 1 to id.
    loop at TI_STAGING WHERE VENDOR = IT_STAGING-VENDOR AND DOCDATE = IT_STAGING-DOCDATE.
      concatenate 'RM06E-EPSTP(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-itmcategory.
      concatenate 'EKPO-KNTTP(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-accassignment.
      concatenate 'EKPO-EMATN(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-material.
      concatenate 'EKPO-TXZ01(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-shortxt.
      quan = ti_staging-poqty.
      concatenate 'EKPO-MENGE(0' id ')' into fnam.
      perform bdc_field       using fnam quan.
      concatenate 'RM06E-EEIND(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-deliverydate.
      netpr = ti_staging-netpr.
      concatenate 'EKPO-NETPR(0' id ')' into fnam.
      perform bdc_field       using fnam netpr.
      concatenate 'EKPO-MATKL(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-mategroup.
      concatenate 'EKPO-WERKS(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-plant.
      ID = ID + 1.
    ENDLOOP.
Regards,
Vishwa.

Do we document BOM information for each item in BR100 for BOM?

Hi,
I'm working on BR100 for BOM. I noticed that in BR100 BOM template there is not a section for the documentation of BOMs for each item. I wonder if the standard is not documenting any of that information in this document?
Thanks a lot,
Robert

Hello Robert,
BR100 explain all setups steps for modules.
BOM for each item is not 'setup' but 'Data Management'.

ECM - For BOM

Similar Messages

Maybe you are looking for