ECM-number range and authorization contorl doubt

Hello Team,
I have below scenario and need help on the same.
1) I need to differentiate change master and ECR with number range can this be done?
2) For Team A - need to give only ECR and change master active status control. For Team B- Only change master but in inactive status control How to achieve this?
3) I have created profiles with status profiles under enge change mang section , but how to make this field mandatory in CC31 or CC01 screen? I browsed and got info like should be activated etc...but i was not able to activate the profiles which were created in Engg. change management section.
Regards,
satish

Dear Satish,
1.If my understanding is correct then its internally in the system for the type - Change master and ECR the change number
object used is AENNR and where in you can assign a common number range group and it will be used for creating change
numbers of both these types.It's not as like the production order type where you can link a different number ange for each
order type.
2.Try whether this option will work out for meeting your requirement.In the standard SAP 2 set of number range (one
internal numbe range and one for external will be assigned) exists.so aaume for CC01 you can make use of the internal
number range,where during CC01 without any value for the field change number you can proceed.When creating through
CC31 you can make use of external number range by giving the change number as the input and you save the data.
check and revert back.
Regards
Mangalraj.S

Similar Messages

Create number range and assign new product id

hi,
can anyone tell me the steps to create the number range and assign it to the product id..
and replace existing product id to the new one through program or.. is there any standard program is available to change the product id
thanks
dinesh

Hi Dinesh,
Agree with Arden, I think there is no number range feature for product IDs. You can have your own number range object and intervals with custom solution on UI to create product IDs sequentially.
I am not sure but have a look at the TCode: COMC_MATERIALID_ALL which may be doing what you need.
You cannot change the product ID once created I think.
You can change the category assignment of the products through the report : COM_PRODUCT_RECATEGORISATION
Check enhancement spot : CRM_PRODIL_EXIT which has got some methods for CREATE and MODIFY Products.
Hope this will be useful.
Regards,
Naresh

MM06E003 Number range and document number

hi
Is the functionality of MM06E003 Number range and document number( user exit ) is same in ECC 6.0 and ECC 5.0
Regards,
vijay

Hello,
Yes, it is one and the same thing.
Thanks!

Business Partner - Number Ranges and Groupings

Hello,
A few weeks ago, we are activated RMCA components and activated Telecommunications 6.0 in a sand box client.
Now we are doing customizing and application of BP.
We want, and we could, to range BP in number range from 1 to 9999999999, as the costumers appear in our CRM system. But the problem is that we cannot do the same with AR/SD costumers because we already have old AR/SD costumers, not the same person, in the same range and we don't have not used range.
I know that we can to convert AR/SD costumers groups, but that problem is that we need to convert costumers number.
How we can open in the same number, the BP and AR/SD costumer? Can we reorganize the old SD costumers?
We sure that we are not the first company that implement RMCA in the middle of life cycle that already have AR/SD costumers.
With best regards,
Galia Ribinik.
Edited by: Yes SAP Team on Jan 8, 2012 7:53 AM

RM-CA: Number ranges and groupings
Choose the following in the Customizing: Cross-Application Components ® SAP Business Partner ® Business Partner ® Basic Settings ® Number Ranges and Groupings.
Define the corresponding number ranges externally in RM-CA and ensure that this RM-CA number range includes both the internal and external CRM number range.
You can choose any name for the group, but it must be the same as the name in CRM.
SD Customer Mapping
Choose the following in Customizing: Financial Accounting ® Accounts Receivable and Accounts Payable ® Customer Accounts ® Master Data ®Preparations for Creating Customer Master Data ® Create Number Ranges for Customer Accounts.
If you also want to create an SD customer during business partner replication, you must create a separate number range for this customer. Assign this number range to the corresponding account group. Choose the following in Customizing: Financial Accounting ® Accounts Receivable and Accounts Payable ® Customer Accounts ®Master Data ® Preparations for Creating Customer Master Data ® Assign Number Ranges to Customer Account Groups.
·SD Customer Mapping
Choose the following in Customizing: Financial Accounting ® Accounts Receivable and Accounts Payable ® Customer Accounts ® Master Data ® Preparations for Creating Customer Master Data ®Define Account Groups with Screen Layout (Customers).
You must reconcile the account group settings for the business partner with the corresponding field groups for the business partner in CRM. If for example a field in RM-CA is not defined as a mandatory field in CRM, replication will fail if an entry has not been made in this field in CRM.
Use the PIDE transaction to control which CRM business partner classification is mapped to a specific account group in RM-CA.
Define the reverse situation here using the corresponding number range grouping.
· Create and assign an SD sample customer
To generate an SD customer in RM-CA during the business partner replication, you require a reference business partner. This is used as a template during creation.
Choose the following in the system: Logistics ® Sales and Distribution ® Master Data ® Business Partner ® Customer ® Create ® Sales and Distribution (Transaction VD01).
Create the sample customer using the account group described in the preceding step. The system name for the sample customer must start with the letters u201CMUSTu201D (such as MUSTER_TELCO).
You must also create the sales area data for the customer. Note that you must maintain each sales area used accordingly.
· Assign SD sample customer
Assign the sample customer in the TCRMBP_REFCUST table (transaction SM30) and define the corresponding determination. If you only want the system to determine a specific sample customer, you can leave the Business partner category, Group and Partner type fields blank.
http://help.sap.com/saphelp_telecom472/helpdata/en/65/d7a55dadd52348ad73320774783649/content.htm

Invoicing billing number range and Accounting billing no range

Hi
Want to know the Link between the Invoicing billing number range and Accounting billing no range
Link between the two no ranges if any
Rohit

Hello,
There is no link between the Accounting document and the Billing document
Billing documents number range were maintained in VN01 and the Accounting document number range were maintained i n FBN1 for each financial year against the company code
If you want the same Number to be generated for both , then
Use T. code VOFA and check billing document type and itu2019s assignment for Accounting document type for example for billing document type accounting document type is RV and check the number range for billing document type through T. code VN01 and then use T. code OBA7 to see number range object for accounting document and then finally use T. code FBN1 and maintain same number range as per billing document type and mark as external number range then system will generate same accounting document number against billing document after releasing the billing document to accounting
Thanks,
santosh

Transport of Number range and release proceure and split valuation

Dear Gurus,
Can we transport number ranges from PRD server to Quality Server?
Also, how will we trasport split valuation and release procedure?
Kindly suggest..

Hi
Number ranges you have to create directly as it is not transportable.
For release Strategy details, all your Release config details are transported Except for the below details
1. Characteristics & values assigned to it ( master data)
2. Class & assigned characteristics to it (master data)
3. Values/ranges inside the Release strategies ( classification details).
These three details are to be recreated/assigned in the client you intend to work upon.
Regards
SAM

Conflict Issue in Number range and need solution

Hi
I am facing a issue in SAP Number range conflict. The case is like that
There are three source system and all these 3 source system are going to be mearge in fourth common system which is already is in use.
We have fatch a conslodate list of all object in excel sheet.
OBJECT SUBOBJECT RANGE_NR YEAR LEVEL
Conflict to be solved - Either "Intervall-Diff.", or "NR Level Diff.", or "Ext/Int-Diff." or more than one of the three
Number range are conflicting based on
1. Differences between number range intervals
2. Differences between number ranges levels
3. Differences between number ranges types (internal/external)
4. Number range overlaps are marked
pls just guide me approch for resolution menthods.
Also let me know FAQ before working on object and what other things i need to check in terms of SD consultant.
Pls advice
regards
raj

Hi
I am facing a issue in SAP Number range conflict. The case is like that
There are three source system and all these 3 source system are going to be mearge in fourth common system which is already is in use.
We have fatch a conslodate list of all object in excel sheet.
OBJECT SUBOBJECT RANGE_NR YEAR LEVEL
Conflict to be solved - Either "Intervall-Diff.", or "NR Level Diff.", or "Ext/Int-Diff." or more than one of the three
Number range are conflicting based on
1. Differences between number range intervals
2. Differences between number ranges levels
3. Differences between number ranges types (internal/external)
4. Number range overlaps are marked
pls just guide me approch for resolution menthods.
Also let me know FAQ before working on object and what other things i need to check in terms of SD consultant.
Pls advice
regards
vicky

Number range and group assignment

When I checked the number ranges for the material types
In my system there are 2 groups with the same number range.
how is this possible?
Edited by: vishnu alapati on Dec 2, 2008 9:54 AM

plz check the one will be with tick of external
check MMNR here check that is there any tick of external
regards
kunal

Excise invoice and domestic invoice sharing same number range

Hi,gurus,my question is addresed to the sap cin gurus
Scenario:-- Normally sap has provided provisions that the domestic invoice and the excise for the export will have different number range object
Transaction-snum or snro(As per the rule the no range has to be approved by excise authorities)
Requirement:--The present requirement of the client is that as per their requirement they will be using the same excise number range both for domestic and the export(They have got the approval from the excise department as per the amendment,that specifies the same)
so i request you to pls guide me as how can it be done in sap that two different business process will share the same number range.
as per my knowledge local excise number range is-J_1IEXCLOC
and for exports is-J_1IEXCEXPand the both will use the same number range and,suppose 1 local invoice is created and say if the no is 1,then if the export excise invoice is created the number will be 2,pls guide me how is it possible that the same number range should be used.
Thanks in advance---Anshuman chakraborty

Dear sir,Thanks for attention towards the issue,but still i need to clarify some details-
the number range forJ_1IEXCLOC are already configured .It is not the case like i have to configure it for the first time however ,so the issue remains how shall i proceed in this case
Sir,i have already checked the transaction j1iin,it does not give any such box to check the-use local no range
infact the error message which the system was throwing to the user that-number range object not assigned for Object: J_1IEXCEXP.
The question remains from my side is what are the complete configuration steps I need to do ,to make the check box appear so as to select-use local number range,and is there any thing to be conveyed to my developer,so that the same appears,
or is it the case like the anything should earlier have been done before the number range for J_1IEXCLOC was created.i would request u to pls guide me giving the complete details of the step to be followed.
Thanks in advance
Anshuman chakraborty

BP creation in CRM WebClient - Role and Number Range assignment

Hello,
I have the requirement to specify a particular number range and BP role when an Account is created in the CRM WebClient Interface.
For example as standard, when an employee is created through the CRM WebClient (BSP component BP_EMPL) the default employee role (BUP003) and the default number range are assigned to the BP.
I would need to specify a different number range and role to the employee
I've tried to configure the Account Identification profiles (activity "Define Account Identification Profiles" in customizing); with that activity you can specify which role and which number group you want to use for the BP (account) creation. However this customizing is affecting the IC WebClient only and not the CRM WebClient.
I was wondering if a similar customizing activity exists for the CRM WebClient (in particular for the BP_EMPL application), or if there's a way around this.
Anybody has an idea about how to solve this?
Any help would be greatly appreciated, thank you in advance.

Hi all,
I have done this by defaulting the bp group in the BADi
1.Go to the se18 and select BADI_CRM_BP_UIU_DEFAULTS and select the interface IF_UIU_BP_DEFAULTS
2. Go to the method IF_UIU_BP_DEFAULTS~GET_DEFAULT_VALUES and you can write your logic here to default the grouping.
In my case I wanted all accounts created to be defaulted to a particular grouping and my code looks like this
lv_name1 = lr_current->get_property_as_string( iv_attr_name ='BP_CATEGORY' ).
                    IF lv_name1 IS NOT INITIAL.
                      IF lv_name1 = '2'.
                        lr_current->set_property( iv_attr_name = 'BP_GROUP'
                                   iv_value = '0060' ).
                      ENDIF.
                    ENDIF.
Thanks & Regards,
Sanila

Restructure Customer Account Groups and Number Ranges

We already have existing customer account groups and number ranges and therefore customer accounts.
We need now to restructure Customer Account Groups incl. number Ranges and Number Range Allocation.
Is this possible? Any advice?
Can a customer keep is old customer number and be assigned to the new customer account group, which has a different number range?
Please adivse.
Many thanks
Petra

Ravi,
thanks very much for your reply. This information is very useful.
Just one more question:
WIth which Customer Number will reallocated customer end up? the originial one or does the customer get a new number relating to the number range of its new customer account group?
Many thanks,
Petra

Xkn1 creation of vendor number range doubt

hi
In xkn1 vendor number range,
I want to insert the interval, as 02 10000 to 30000
when I try to save or insert , it is not saving,
A popup as "enter intervals without overlap "
if i try to change it to 2 or 20: its not accepting it, a message popups as existing number,
how to come ovr this problem,
before inserting number range, should we enter company code , please help me.
warm regards.

The reason you are getting that error message is that, that number interval is already used by another number range. Check the existing number ranges and choose an interval that is not used yet. Or you can assign an existing number range to the vendor group that you have created if that range satisfies your requirements.
Edited by: PaulKr on Mar 5, 2010 5:41 PM

Number range object missing NRIV and cant activate IOBJ during import

Hi,
We have a number object RS_OBJNUMG in BW used for many infoobjects. However object doesnt exists in table NRIV and import for infoobjects are failing with error:
Interval 01 of number range RS_OBJNUMG is missing
message R7453
I thought that as when infoobjects are created they get automatically assigned to number range....
Can somebody help?
thanks

hi,
check if the similar problem
Error calling number range object 0MATERIAL for dimension D4 ( )
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> choose the infoobjects>> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
hope this helps

PO number range- change from internal to external and then change it back

we have following situation- we had certain issues with the system where most of the data got curreptrd except data relative to procurement for dates March 7 to March 30. We have extracted the procurement data - PR / PO etc for the dates March 7 to March 30 and we want to upload this data in the uncorrupted enviornment dated March 6 using the old numbers originally assigned by the system.
I need to change the configuration for PR and PO number range from Internal to external so we can upload PR and POsfrom March7 to March 30 and then swich the number ranges back to internal so we can enter new data dating from March 31.
What is the best way to do this?
Thanks in advance
Raj

Hi
Create external number range and assign it to theno. range external in that Document type then you can use both internal and external number ranges for that doc without disturbing the system once completed remove the external number for that doc type. while creating the PO give the number you want before saving so that the PO will be saved with the number you had given.
Note: Make sure that you are not using duplicate PO no already assigned
Kiran

Internal order types and number ranges

We have two SAP instances and want to load Internal order types and number ranges and Internal orders from 4.6 to 4.5 version.
I need to determine if there is an overlap of number ranges for the internal order types used in 4.6 and 4.5
Could you please help me how to approach? Manually verifying each range in both system is a tedious job and very confusing as the numbers are too big.

Hi,
I can suggest one thing which seems to be worth trying. Involve one technical guy in downloading the number ranges as well the orders of the numbers used from both the system and compare it. Then compile them and upload it again.
Trust this helps much!
Cheers!

ECM-number range and authorization contorl doubt

Similar Messages

Maybe you are looking for