ECN and ECR configuration in SAP

Dear all,
We are in SAP R/3 4.7 version .Can anyone provide a useful document on the steps involved in handling workflow for ECN and DCM.
Your experts help will be much appreciated.
Regards,
M.M

Hi Magesh,
You can find all the information regarding engineering change number in the following link .
http://help.sap.com/saphelp_47x200/helpdata/en/d8/731cab4b7511d1894b0000e8323c4f/frameset.htm
Please read change masters for ECN.
Regards
Amber
SAP Support

Similar Messages

ESS and MSS configuration in sap ECC 6.0

Hello friends,
In our ECC6.0 system we want to configure ESS and MSS... well is this ECC6.0 system have contains this settings in predefine or i have to apply for some patches and addons???? what will be the further steps for basis peoples in this ESS and MSS configuration??? please help me...
Regards
Farkath
Edited by: farkath ulla on Nov 29, 2011 4:34 PM

Hello Farkath,
Please go through the below wiki to get more details of components required in ECC to configure ESS/MSS in portal.
http://wiki.sdn.sap.com/wiki/display/EP/DownloadinganddeployESSand+MSS
Good Luck.
Thanks,
Siva Kumar

Releted to h\w and s\w configuration for SAP B1

HI
please tell me exat hardware and software configuration for SAP
B1
becouse i am going to implement on (bled server) so is it possible?
please replay with configuration
regards
sandip

Hi,
If you are authorize to sign in with Service partner portal you can download the sizing guide thru' the following link. You need S-user id (given to partner)
You can down load sizing guide for B1 vesion 2005 X version from the Document resource center.
https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000706510&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
Regards,
Venkatesan G.

MS active Directory Configuration on SAP 4.7 and ECC6.0

Hello
Can anybody guide the steps required for MS Active Directory Configuration with SAP 4.7 on AIX and
and ECC 6.0 also on AIX 5.3.
Currently we are using many different applications on client landscape.
The requirement is for implementing the Single Sign On for all the applications
on the client landscape.

Please check
/people/andre.fischer/blog/2008/06/04/windows-server-2008--active-directory-certified-for-the-bc-ldap-usr-directory-interface-for-user-management
In Case you also have EP then
/people/wai-hon.lam/blog/2006/04/20/windows-integrated-authentication-via-kerberos-on-an-ldap-data-source
Also check below for SSO
Note 121178 - NT: Installation note for SSO Single Sign On
Note 138498 - Single Sign-On Solutions

Configuration between SAP PI and BPM in SAP PO

Dear Experts,
I am working on SAP PO 7.31 and want to carry out configuration between SAP PI and BPM in SAP PO. I carried the post installation
activities in NWA i.e. CTC.
Helplessly , I could not find any documents and notes to refer the configurations.
Regards
Rebecca

AAEx configuration:
Advanced Adapter Engine Extended (AEX) - Installation and Configuration - III
Configuring SAP BPM and PI runtime:
Configuring Message Processing from PI to BPM - Process Orchestration - SAP Library
Sample BPM
NetWeaver BPM for System-to-System Message Orchestration (Including Migration of ccBPM to NW BPM)
Hope this helps

Help with Apache Reverse Proxy configuration with SAP Portal and SAP Webgui

Dear Experts,
I have an issue configuring Apache to work with SAP Portal and ERP webgui. Accessing Portal through Reverse Proxy is working fine. But the problem arises when we try to open an iView ERP webgui transaction page from Portal with the Reverse Proxy. Have anyone implemented similar requirements and could advice on the configuration required on the Apache side? Thank you

hi,
pls check the below links for reference:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24396589-0a01-0010-3c8c-ab2e3acf6fe2
searchsap.techtarget.com/searchSAP/downloads/chapter-december.pdf
1)Learn to implement the reverse proxy filter and portal gateway in SAP Enterprise Portal 6.0 on Web Application Server 6.40.
https:/.../irj/sdn/nw-portalandcollaboration?rid=/webcontent/uuid/006efe7b-1b73-2910-c4ae-f45aa408da5b
.2 )Configuring the Portal for Your Reverse Proxy Filter Solution . ... This document describes the reverse proxy filter mechanism in SAP Enterprise ...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/32ad9b90-0201-0010-3c8a-c900cd685f8f
3)have full reverse proxy functionality. Possibly. filter. requests. Internet ... Reverse proxy (optionally with authentication etc.) ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c066c390-0201-0010-3cba-cd42dfbcc8be
Note:please reward points if solution found helpfull
Regards
Chandrakanth.k

Role & Meaning of C&FA and it's configuration in SAP SD 4.7 ?

Hi
 My name's Karthik.I am a SAP SD consultant.I hav a doubt.Can anybody help me to make me understand the meaning,full form ,role and configuration of C&FA in SAP SD module 4.7.
Is it (1) Carry and Forwarding Agent. Or
 (2) Consignee And Forwarding Agent, or
 (3) Clearing and forwarding Agent ,OR Something else ????????????????
What is C&FA role in pharmaceutical Industries Particularly???????????
Thanks

hi,
the term C& F means CLEARING AND FORWARING agent ,
he is mainly responsible for clearing the client stocks as and when the stock arrives and forwarding it to the authorised people as instructed by the buisness.
they are the intermidiary in running buisness . as buisness need to explore new
areas and they can open offiices in all the places,then company appoints a C&F agent who is responsible for taking care of goods sent by the company and forwarding to the people say,dealers in that area withthe prior intimation of the
buisness.
good luck
reward points
regards
sriram

Where can i find configuration and other aspects of SAP learining solution

where can i find configuration and other aspects of SAP learining solution
Ross

Plz go through below URLs:
[http://saphrexpert.blogspot.com/2009/01/lso-configuration.html]
[http://help.sap.com/erp2005_ehp_04_sp/helpdata/en/69/415a2b9208485380091d5e3c659c26/content.htm]
Mohan

Variant Configuration in SAP CRM

Hello all
My client is currently using SAP R/3 4.7 and heavily use VC for configurable products and also for pricing but in the process of moving to ECC
Now we wish to explore the possibility of using SAP CRM 7.0 to enable our sales force to use CRM Web GUI to create quotes and sales orders ( in the future) for configurable materials.
My questions are as following:-
1. Is it possible to download all VC related data into CRM from R/3 including pricing? I understand that for different VC object, I will have to use different CRM objects but is it possible? If the data transfer is possible, is it typically done by a middleware resource?
2. I would also like to confirm that by creating a run time version and Kbase is required to enable the download to CRM.
3. No changes are possible on the product that can be replicated back to ECC
4. Looking at the forums - I gather that "from CRM 2007 the PME is replaced with WEB UI in CRM. IF you want to do the modeling of a product then u need to use WEB UI and also for generating the KB" - does anyone have any information on this using the XCM ?
If you could please point me to the appropriate help on this topic, I would really appreciate it.
Best regards
Raj

Hi Anne,
Hope you have done the following settings -
The product is marked as configurable in the product master data.
Product configuration is activated. You activate product configuration in Customizing under Customer Relationship Management Master Data Products Settings for Configurable Products Allow Configurable Products for a Product Type . For more information about activating product configuration, see SAP Note 854170.
You have created a product model (SAP CRM), or replicated a knowledge base with the configuration master data from SAP ERP to SAP CRM
These are mentioned in the below link -
Product Configuration with the Configuration Engine in SAP CRM - SAP Library
Hope this will be useful.
Thanks and Regards
DJ

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

MM configurations for SAP AFS System

Hi,
        I'm working in MM configuration for SAP AFS production system, After uploading AFS Materials successfully and also created Purchase order to make a stock for that material, but PO created successfully but not able to do Goods receipts for created PO.
       Errors : Purchase order xxxxx has no items,
Once created sales order for the same material again we got the error while GR but error is different.
      GR is not possible for this PO number.
But material type is ROH , and its external procurement only.
Please let me know when we will get this type of errors.
Thanks and regards
Nisar.

Hi Nasir;
Some possible causes are;
1.     Defining inbound delivery (Or kind of a confirmation) in the PO LI level and not maintaining the document subsequently
2.     Not releasing the PO before the GRN
3.     Creating the PO with a material with Grids (AFS Basic Data Screen) and not maintaining the grid value at item detail level of the PO
Azwath Mohammad
http://www.sapafs.net

Error in the configuration for sap logon tickets

Hi Forum,
I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
Error in the configuration for SAP logon tickets
But if I click "Yes", system displays cockpit.
How can I avoid this error.
Thanks in advance
Regards
Shridhar

You will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
Cheers,
Darren.

Hi, what's the impact of creating sites through configuration in Sap retail System?

Hi Experts,
Business requirement is to have a production plant created through config in retail system and then ship the finished product to DC using STO's and Dc will be created as master data in retail system. please share your experience on business impact on this integartion of production plant and site in Retail?
Thanks in Advance !

Hi Govind,
In SAP Retail system, the options for creating plant from configuration is disabled. Means in SPRO screen, the execute button is not there for these options. So you will not be able to create plant through configuration in SAP Retail system where the retail switch is activated.
All the Retail related features will not support that plants.
To the best of my knowledge, Site created in Retail system using WB01 transactions can be used for production cycle to implement manufacturing scenario. Using article to article stock transfer you can transfer the stock of Finished Goods articles to trading articles and so on.
Various processes are available for this.
Let me know if you need any more information.
Regards,
Amit

MaxDB configuration file - SAP System Rename

Hello,
I am new and tried to make a System Rename with SWPM.
We have maxDB.
After a few steps the setup wants you to choose a maxDB configuration file which was used for installation of the source system.
Does anyone new where I can find this configuration file?
I tried a few cfg files but nothing was correct.
These files here are not correct, I tried.
Configuration Files - SAP Documentation
Thank you so far and well greets.
Stefan

Hi Deepak,
Thanks for your suggestion but there are no existing enteries for MaxDB in the windows registry.
We are facing an issue while renaming the database. Kindly refer to SAP Note : 1427931
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
Best Regards

Partner Profile and its configuration.

Hi all,
I am creating an SD IDoc using EDI and send it between two servers.
I need to know what is a partner profile and why should we create it.
what are the steps to be followed in maintaining a partner profile and its configuration.
Any pointers will be highly apppreciated.
Thanks in advance,
Regards,
Jose
Edited by: Jose Anthony Reddy on Dec 17, 2007 11:23 PM

Hi Jose,
Below is a material you can go through .
Creating an Outbound Partner Profile
Here you must enter the data manually. Alternatively, you can also transfer the default values from Customizing.
If you are not yet on the change screen of your desired partner, choose SAP Menu ® Tools ® IDoc Interface/ALE ® Administration ® Runtime Settings ® Partner Agreement (WE20).
1. Position the mouse on your partner in the required partner type node. Choose in the Outbound Parameter table.
Key Fields
2. You have already determined partner number and partner type in general partner processing. The partner function from the master data defines the addressee, that is, it is used for further classification purposes. If you have selected outbound processing under Message Control (MC), the function must be identical to the corresponding Message Control field. Otherwise, it is optional.
Partner A (customer 1110) wants to order a material from partner B (vendor 1014). Partner B is of the partner type LI (vendor) and must choose the Message Control value VD (vendor) as the partner function because orders must always be processed using Message Control.
3. Specify the business process with the logical message, within which the IDoc type is used. The logical message is described by three parameters: The message type is based on EDIFACT message types: For example, a purchase order is of type ORDERS. You can further divide the message type with the optional fields message code and message function.
4. Configure the test indicator if you want to send the message as a test.
Message, partner and test indicator are the seven key fields of the outbound partner profiles (the client comes in addition to these). Also see the graphic at the end of this section.
Other Fields
5. In the Outbound options tab page, you can determine whether IDocs are forwarded immediately to the receiving system. You should ensure that your entries are compatible with the Message Control priorities, if you have chosen outbound processing under Message Control. A list of recommended combinations is provided in the section Outbound Processing Under MC: Procedure.
6. You have already defined the Recipient port in Port definition.
7. If a port of type TRFC is used, the Queue Processing field is visible. You can use the indicator to specify whether IDocs are to be sent with qRFC. This sending technique is only possible for recipient SAP systems as of SAP Web AS 6.20.
You should only set this flag if it is really necessary that the IDocs sent are received in the receiving system in the same sequence as they were sent by the sender system. Queuing can cause posting delays in the receiving system, because an IDoc in the queue cannot be posted. In this case, the following IDocs in the queue cannot be posted until the error is resolved.
8. If you have set the Queue Processing indicator, the Rule Name field, which you must then also maintain, appears as well. The rule name defines the rules for queue names. You can specify these rules in the transaction qRFC IDoc Queue Name Rules (WE85).
9. Specify the IDoc type as the Basic type with or without extension. If you want to use a view of your IDoc type (for example, to improve the performance), specify this here.
The figure below shows the m-to-n relationship between logical messages (business meaning) and IDoc types (technical format). Message 1, for example, is always assigned to one IDoc type, while message 3 is assigned to two IDoc types. IDoc type 2, in turn, is also assigned to 2 logical messages.
10. The segment release specifies the release from which the segment definitions (not the IDoc type definition) originates. We recommend that you leave this field blank so that the most recent segment definition is used.
11. You can propose an EDI standard, version and EDI message type for the receiving system in the tab page EDI Standard. Most subsystems, however, should be able to determine these EDI settings themselves (from the logical message).
12. You can define permitted agents for cases in which exceptions occur. This entry overrides the entry in the general partner profiles. Depending on the message, therefore, the exception can be handled by different agents of the same partner.
13. You can specify whether syntax errors are to be ignored or are to lead to a processing error (Cancel Processing flag under syntax check in the tab page outbound options). For more information about exception handling and permitted agents, refer to the following section: Exception Handling
14. If your hardware supports it, create partner and message specific telephony data for outbound IDocs. For more information, see General Partner Profile.
Graphic: Outbound partner profile fields (general)
Key fields are shown in gray. The values for partner, message and test indicator (and client) therefore provide a unique ID for the IDoc type in outbound processing.
Regards,
Praveen

ECN and ECR configuration in SAP

Similar Messages

Maybe you are looking for