ECN: RD(F)20020124083

Hello All -
I am the proud new owner of a slightly used K7N420 Pro motherboard, cpu and ram. Coming from a dual PIII setup, I must say.. WOW what a difference!! At anyrate, I have a few questions. First, I have two types of ram here, PC2100, and PC2700.
For this board, which should I use? I mean, which is better/faster/the right choice? Secondly, the cpu that came with the board is a XP 1800+, Now, I had to update the bios from 2.0 to 2.7, which wasn't a hastle at all.. but, I went to see just how fast a cpu I can stick in this puppy.. MSI's site say's upto a 2600+.. yippe!!
However, after quick check on AMD's web site, I turned up this message about this motherboard:
"ECN: RD(F)20020124083 required for Athlon XP 2100+ and higher.
For information or questions regarding ECNs please contact the motherboard vendor. "
So... how does one go about checking to see what ECN number their board is?
Thanks a lot, and I'm glad I found you guys :P
crix0r

Ahh, I got the impression from their website that the ECN# was a revision number of some sort, so I got the feeling that it was fairly important. But, like you say.. I'll just let it go.
Yeah, According to the chart on MSI's website, the board will do upto a 2600+, however, that seems self defeating to me, since I belive the 2400+ was the last to use a 266 Mhz FSB (which, my board supports
Ok, so the board is picky about it's ram type, which do you suggest? Which always works? Price really isn't an issue, I just want it to work. Also, what CPU cooler is best for the 2400+ AND will fit on the board itself? :P
Thanks again.

Similar Messages

BOM and ECN, what's the best way to do it?

Hello Experts,
I want to use ECN to keep track of changes on mulitlevel BOMs, but I am struggeling with understanding how this is done in the best way.
Basically, my understanding is that if you want to do a change, you create a change master and set a validity date. Then, next time you want to do a change, a new change master is created with its validity date. So you end up with a lot of change masters for the same BOM.
Now, how am I supposed to report all changes done to a BOM in a userfriendly and easy way? I cannot find a report that gives me changes pr part/BOM number?
Am I missing the point here or do you have any good ideas?
rgds
GAR

Dear GAR,
Change number helps you to find out the history of the objects like BOM,material master.
The history includes the creation,changes and deletion of datas.
But there is no direct report in SAP where in you will get all the details like in which field the change
has happened in combination with ECM.
You can have a look in the reports like CC05,CC04,CC07.
Still if this does not suit your business requirements means then you have to go for a customized report.
You can also refer these links related to ECM,
Re: ECM
Re: ECM ECR
Re: ECM for BOM
http://www.sap-img.com/pp007.htm
Re: Bom Change Enter change number - to make error message
Revert back,still if you have more queries.
Regards
Mangalraj.S

Material master change with ECN mandatory?

Dear All:
How can I make the field of ECN number mandotary in case of material master changing? Thx.
BR
Kevin Dai

Hi,
For making Material Master change with ECN mandatory you need to activate ECM.
For more details of ECM, pls go through the following link :
[Engineering Change Management|http://help.sap.com/erp2005_ehp_03/helpdata/EN/64/a49a382ba4e80fe10000009b38f8cf/frameset.htm]
Hope this helps.
Regards,
Tejas
Edited by: Tejas Pujara on Nov 14, 2008 8:29 AM

How to update BOM with diff. ECN

Hi Team
During change in BOM using ECM, I am allowed to change it with same ECN. If we change it with diff. ECN, it keeps the history of previous ECN.
Foe example a BOM has 3 diff. items, which is created with ECN: 001.
Now if we delete 2 items & add 1 item, then system displays all the items with respective change no.
i.e. Total 6 line items are displayed.
Pls suggest solution.
Thanks

Hi Bhushan,
For your case you need to :
Create a different Change Number through T Code: CC01 and create a new BOM (for the same material as it exists without ECN agaist any components) with this new change number. If you now delete / add some components (after you enter the BOM with this new ECN) ;it will be exclusively be recorded with this ECN.
If you use the same ECN; and do further changes at the components; all chages till date will be recorded as you have mentioned.
Thanks,
Ravi.

Delete ECN for a BOM

Hi,
How can we delete ECN along with the BOM to which it is attached? All this is getting affected in future.
This has got creted by mistake and needs to be removed from SAP.
Thanks,
Ravi.

Ravi,
I appericiate you having taken time to explain the problem and also how it was solved. This way if the forum continues, it would really help everyone, not only the guys who are posting problems, but also to people like us who answer them, because sometimes, what we suggested may not have been adopted, but alternates would have used.
That's the greatness of SAP...for one problem multiple approach and solutions possible most of the time. Once again thanks,
Regards,
prasobh

Routing selection in Production Order when using ECN in Routing

Hi experts,
I'm having some trouble with routing selection when using ECN in routing creation.
I tested a case where I have 3 routings without ECN, and the Order asked me which one of the 3 I want to use.
Then I created a routing with ECN. The order asked only one routing without ECN and the new routing with ECN.
Do you know if there is any relation about using the ECN in Routings and using at the same time Routings without ECN, when selecting the routing in production order?
Anybody can help?
Thank you,
Caio.

Hi Ayoub,
All the 4 routings are valid from Oct.2014 to 31.12.9999.
The Order date is from Apr.2015.
I've made another test with 2 routings created with ECN and the order chose one without asking me what to choose. I don't know the criteria used in this functionallity.
Thanks,
Caio.

New component in BOM - No ECN

We need to change a component quantity in the BOM.
BOMs are not ECN number maintained.
The Material No. stays the same.
How can we change the BOM and still track the previous orders which needed that BOM?

Hi Abhi,
If u want to use two alternative BOMs for same material number, u can use production version and u can select the PV while creating production order manually.
please comeback
Regards
Pradeep

Enabling ECN marking on Cisco nexus 3064

Hi,
I have a requirement to enable ECN marking on CIsco nexus 3064 switch. ECT(0) traffic is being switched.
Tried the below configs, But not quite helping.
==================================
n# sh policy-map type network-qos nq_pm_1
Type network-qos policy-maps
===============================
policy-map type network-qos nq_pm_1
    class type network-qos nq_cm_1
      mtu 1500
      congestion-control random-detect ecn
    class type network-qos class-default
      mtu 1500
     congestion-control random-detect ecn
n# sh run | beg "system qos"
system qos
service-policy type qos input iscsi
service-policy type network-qos nq_pm_1
n# sh policy-map type queuing pqu
Type queuing policy-maps
========================
policy-map type queuing pqu
    class type queuing cqu
      random-detect minimum-threshold 10 packets maximum-threshold 350 packets
      bandwidth percent 50
    class type queuing class-default
      bandwidth percent 50
      random-detect minimum-threshold 5 packets maximum-threshold 5 packets
n# sh run int e1/21
!Command: show running-config interface Ethernet1/21
!Time: Tue Apr 29 09:04:35 2014
version 5.0(3)U5(1b)
interface Ethernet1/21
no switchport
service-policy type queuing output pqu
ip address 15.0.20.1/24
what could possibly be missing?
Thanks
Jose.

Duplicate post.
Go here: http://supportforums.cisco.com/discussion/12190426/ecn-marking-cisco-nexus-3064

ECN field obliged when changing a BOM

Hi all,
I found after flaged the historical demand and ECM in OS27,it is still just a warning message that tells the user a ECN should be maintained when doing CS02,changing the message type and category is not available in the standard system.
How many other ways that I can make the filed ECN is a must when changing the BOM,besides SHD0.
Is there a standard and easy solution?
Txk!

Dear,
For user you can do it through the Authorization object C_STUE_NOH
Please refer this link for details,
Re: Change number mandetory for CS20 -reg
Regards,
R.Brahmankar

ECN Export to cFolder along with Affected item

Hi Experts,
We have a requirement to export ECN along with all the affected item and history of ECN in PDX format.
I am using cFolder to export the BOM in PDX format. There is no option to export the ECN from SAP to cFolder using CFE02
transaction.
I can export the ECN to cFolder using FM CFX_S_API_WRITE. But, I also want to link the Affected items to ECN while exporting.
My question is
Is there any way (any FM or Method) so that I can read existing SAP BOM in terms of cFolder attributes (like CFE02)
and pass it to FM CFX_S_API_WRITE?
There could be many BOM in an ECN and it is required to write all the fields of BOM so it is hard to write BOM using CFX_S_API_WRITE.
Regards,
Atul

check out this class
CL_CFX_BI_BOM -> GET_BS_DATA this is used to read the ERP BOM details.
then check out EXPORT and EXPORT_VERSION ( ). To understand how to convert the ERP data into the cFolders structure.

Any BAPI or FM to get ECN data.

Hi,
Anybody help me for how to get ECN data, Which is shown in CC07 transaction for given change number. If there is any BAPI for FM please inform,
Thanks.
Mahesh

Hi,
check with these bapi it maight be useful to u.
these are for generic engineering node
BAPI_1197_EXISTENCECHECK
BAPI_1197_REPLICATE
BAPI_1197_SAVEREPLICA
reward if hepful.

Cancel ECN in BOM & remove change number in Routing

Dear Gurus,
I have 2 questions about ECN , pls. help .
1> If we made a wrong ECN in BOM with change number, pls. advise how to cancel this ECN in BOM.I tried to delete the change record in CC02 but it's not allowed since BOM has been changed already.If I made a new change in BOM with new change number, in BOM it will show a new change number, but I don't want to show these change numbers because it should be no changes happen, pls. advise how to recall the change and remove the change number in BOM .
2> We use change number when we change routing ( CA02) in the past, now due to some internal issue, we want to remove all change numbers in routing, I can't find any option in CC02 or CA02, pls. advise is it possible to remove existing change number?
Thanks & best regards,
Tina

Dear Tina,
In my understanding you may not be able to delete the change number assignment made in BOM or routing.
But you can define an alternative date for the made changes and set the valid from date as say 31.12.5555.
Check and revert.
Regards
Mangalraj.S

ECN number creation

Dear all,
I am trying to create a change number using the BAPI CCAP_ECN_CREATE for my development to interact with legacy system using SAP XI.
While i am creating the change number, I need to specify some profile which can is maintained in SAP to specify the action related to its object types. While doing so I am not sure what are the necessary fields that needs to be populated in BAPI other than status profile and authorization group.
Because I am using providing these details a ECN Number is generated but it not have any related object types that are enabled, the same when i m doing via TCODE CC01, it populates the related objects.
Please provide inputs.......
Regards,
Nithiyanandam

Hi,
We also tried this FM
We were not able to achieve, so we went for BDC
See this following code
CONCATENATE p_date4(2) p_date6(2) p_date+0(4) INTO v_date."CCT51576
PERFORM f_bdc_dynpro      USING 'SAPMC29C'                '0100'.
PERFORM f_bdc_field       USING 'BDC_CURSOR'              'RC29A-AEPRO'.
PERFORM f_bdc_field       USING 'BDC_OKCODE'              '/00'.
PERFORM f_bdc_field       USING 'RAD_BUT_ECNTYP-NORM'     'X'.
PERFORM f_bdc_field       USING 'RC29A-AEPRO'             'Z1'.
PERFORM f_bdc_dynpro      USING 'SAPMC29C'                '0010'.
PERFORM f_bdc_field       USING 'BDC_OKCODE'              'UEOB'.
PERFORM f_bdc_field       USING 'RC29A-AETXT'             wa_mapl_result-plnnr.
PERFORM f_bdc_field       USING 'BDC_CURSOR'              'RC29A-AENST'.
PERFORM f_bdc_field       USING 'RC29A-DATUV'             v_date.
PERFORM f_bdc_field       USING 'RC29A-AEGRU'             'Routing Change'.
PERFORM f_bdc_field       USING 'RC29A-AENST'             '1'.
PERFORM f_bdc_dynpro      USING 'SAPMC29C'                '2000'.
PERFORM f_bdc_field       USING 'BDC_OKCODE'              '=FCBU'.
PERFORM f_bdc_field       USING 'BDC_CURSOR'              'RC29A-OITXT(01)'.
PERFORM f_bdc_field       USING 'RC29A-PLNTY(01)'         'N'.
PERFORM f_bdc_field       USING 'RC29A-PLNNR(01)'         wa_mapl_result-plnnr.
PERFORM f_bdc_field       USING 'RC29A-OITXT(01)'         'Routing Change'.
CALL TRANSACTION c_cc01 USING it_bdctab                        "perform bdc_transaction using 'CC01'.
                          MODE   c_mode
                          UPDATE c_update
                          MESSAGES INTO it_messtab.

Change ECN using CCAP_ECN_MAINTAIN

Hi Dear,
I have a requirment where ECN data needs to be changed using BAPI..CCAP_ECN_MAINTAIN.
following are the parameters passing while calling
CALL FUNCTION 'CCAP_ECN_MAINTAIN'
EXPORTING
change_header = I_ change_header( passing Change No only)
object_mat = I_object_mat (Active =X)
FL_COMMIT_AND_WAIT = ' X'
FL_SYNCH = 'X''
TABLES
objmgrec = T_objmgrec (CHG_OBJTYP =4,BOM_STD_OBJECT = Material NO,MATERIAL = Material no)
It is throwing an exception " processing canceled"
Please let me know do i need to pass any other parameters while calling this BAPI.
Thanks in advance,
Regards,
Vji

Hello Siddhartha ,
Could you please tell me what is the use of flag FL_SYNCH ??
Many Thanks,
Jitendra

Processing ECN through workflow.

Dear all,
Can anyone provide a useful document on the steps involved in handling workflow for ECN and DCM.
Your experts help will be much appreciated.
Regards,
M.M

No reply for this post

ECN: RD(F)20020124083

Similar Messages

Maybe you are looking for