ECO number with revision level and release key

Hi All,
I have a requirement from client with regards to Engineering change manangement.
The scenario is that we are maintaining BOM for materials.Whenever a change is required for BOM a ECO number is created with release key.
Once the BOM is changed against ECO number is created a workflow is triggered for approval.
Then it goes through a series of approvals in the heirarchy.In each level the reviewer will propose a new value for the changed line item.
All these changes have to be maintained in record.At the end the final approver reviews all the proposed changes and release the ECO number with the appropriate change.
I had a thought of implementing the above scenario with ECO with revision level and release key.
But I am unable to replicate the scenario due the fact that,when I select the ECO number with release key,I cannot select the material in Object type.
Its disabled.Its available when I create a ECR with release key.
Please suggest a way to create ECO number with release key and revision level for BOM.
Regards
Richie

Hi,
You create the revision level against the material (via MM02, basic data tab)) not against the serial. The serial number, by definition, would be unique to the combination of material and revision.
Regards

Similar Messages

Problem with Revision level for a Material

Hi All,
I have a problem with Revision Levels for a Material.
I want to know the Revision Level for a particular Material for BOM Creation.
Can anyone please let me know from which Table or Funtion Module can I get the Rev Level, once I pass MATNR (Material) and AENNR (Change Number).
<REMOVED BY MODERATOR>
Thanks and Regards,
Harish Kalla
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

HI,
You can use table AEOI.
Hope this helps.
<REMOVED BY MODERATOR>
Regards,
Sipra
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

Workflow with item type and item key is in progress. Abort existing workfl

Dear all,
I'm using the below code from the submit button event to launch the workflow. The workflow works fine when I submit for the first time, when i try to submit for the second time from the same session it throws me the error as Workflow with item type and item key is in progress. Abort existing workflow.
Where I am struck,Kindly send me any solution.
I am using below code in oaf
public void workflow(OAPageContext pageContext,
String headerId,
String empName,
String userName
String wfItemType = "XXSample";
String wfProcess = "XXSample";
String wfItemKey = headerId;
OANavigation wfClass = new OANavigation();
// Create Workflow Process
wfClass.createProcess(pageContext, wfItemType, wfProcess, wfItemKey);
System.out.println("Workflow created");
wfClass.setItemAttrText(pageContext,
wfItemType,
wfItemKey,
"XXHDRID",
headerId);
wfClass.setItemAttrText(pageContext,
wfItemType,
wfItemKey,
"XXEMPNAME",
employeeName);
wfClass.setItemOwner(pageContext, wfItemType, wfItemKey,username);
wfClass.startProcess(pageContext, wfItemType, wfProcess, wfItemKey);
System.out.println("Workflow started");
Thanks,
Kumar.

Item type and item key forms unique record for the workflow session, you cannot have 2 instances of the workflow running for the same header id, in your case. Check if the process exists for the header id. If so, display a warning message without launching another workflow session, else start the workflow process.
Thanks
Shree

Repairing Library Permissions: But the instructions didn't work clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Went to Help. But the instructions didn't work
clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Give this a try:
1 -be sure to have a current backup of the iPhoto library.
2 - download and launch http://www.macchampion.com/arbysoft/BatChmod.
3 - click on the File button, locate and select your iPhoto Library.
4 - check the Unlock and Apply to enclosed checkboxes.
5 - make no changes to the other checkboxes
6 - click on the Apply button.
OT

I can't adjust the sound with the f11 and f12 key

Hey folks,
after the installation i can't adjust the sound of my macbook with the f11 and f12 keys.... first i think it doesn't work with the keys ONLY but then i check the sound settings .... diffrent way same problem ... so i'm looking for help

Resetting the PRAM worked for me.

Problem with childs nodes and automatic key mapping in a Data Object

Hi experts!
I'm doing the service order tutorial from the mobile help at [this link|http://help.sap.com/saphelp_nwmobile71/helpdata/en/21/9b5b924c3b434fba4767731794b029/frameset.htm] and I have a problem...
In the topic "Modeling the Equipment Data Object", says you have to mark the "Automatic Key Mapping" checkbox. So when I had to create a third child node ( the location node ) the system raised an exception with the message "Deselect automatic key mapping flag for more than two-level nodes". I'm trying deselecting the flag and creating the location node, but when I want mark again the automatic key mapping flag, this is disabled.
What can I do to solve this and create the three child nodes with the flag marked? It's a configuration thing?
Any help it's very welcome. Thanks in advance.
Best regards,
Simon.

The thing is: Its not allowed to use automatic keymapping if you have more than two levels. This is why the message showed up, and this is why its been disabled.
What automatic keymapping does: Figures out automatically which child node belongs to which parent (by guessing from the field name and type, which fields in the child correspond to which key fields of the parent).
On three levels, this becomes more complicated => Its disabled.
How to do keymapping yourself instead of having the DOE do it automatically: Do 'Explicit keymapping' from each child to its parent. Explicit keymapping is done by clicking on the corresponding menu button in the child node. Here you need to associate child node fields (they need not be key fields of the child, but they are allowed to be that as well) to each of its parent nodes key fields (so that each child can be associated to its parent).
Cheers

DB Copy (MSSQL) between two SAP systems with different level and Components

Hi,
we have a SAP system release mysap 2004 SR1 and for "the upgrade project to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
After I compared the two systems I have following questions:
1) there are 4 Software Components which are not in the new system (sap03). This are:
PI
FIN_BLERP
BP_INSTRASS
Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
Thanks in advance
Best regards
HanseAtik

Hi Juan, hi Clas,
just to be clear and to not stuck on the the way:
The systems are as follow:
1) the source system:
                     - Windows Server 2003,
                     - MSSQL Server 2005 with 32 bit.
                     - Mysap 2004 SR1
2) Target system:
                   - Windows Server 2003
                   - MSSQL Server 2005, with 64 bit.
                   - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
I hope this will work. could you post the link the DB Copy guide we are talking about?
By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
Thanks in advance
Best regards
HanseAtik

I am having problem with my F9 AND F10 KEYS TO CONTROL sound

i think my f9 and f10 keys are not working properly..
This question was solved.
View Solution.

Ok. I found where was the problem. Actually the letter O should be the number 0.
Please do the below procedure.
Uninstall the current driver for the IDT audio.
Resource:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Download and install the latest IDT audio driver for your model from here.
Restart the system.
Uninstall the current driver for the HP Quick Launch Software (if it's installed in the system).
Resource:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Download and install the latest HP Quick Launch Software driver for your model from here.
Restart the system.
Download and install the latest HP On-Screen Display Utility version from here.
Restart the system and check the results.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Hi good day i just purchase Adobe light room after installing it they require a serial number i got a liesense number with 5 letters and 13 numbers and it requires 24 in the field how can you help me

hi good day i just purchase adobe lightroom 5 from amozon a downloaded version , it is asking me for a serial number i only got a licence key with 6 letters and 13 mumbers and the field requries 24

Find your serial number quickly

Upgrading TMS and Release Keys

Is a new release key required when upgrading TMS versions, and If one is required, is there some place in TMS that shows when you have a valid key for the current version or when you need to apply for a new one?

Hi Patrick
if you are asking for the upgrade part if the TMS installer will show you a warning if the key is valid for the version you are trying to upgrade to then yes:
This is in the installation wizard when upgrading from a major version to another and if you do not provide the correct key. If the key is correct the upgrade will continue without this question.
And as sumeet is saying if you have a correct serial number and the TMS is not showing any warnings when you are operating the TMS the key is most likely valid.
/Magnus

How do I use Firefox sync on my Android device with both Aurora and Release?

I have both Aurora and Release installed on my Android phone. I have set up a New Sync account on my desktop. I can log in to it with Release, and it syncs great.
However, my Aurora build keeps popping a "could not sign in" notification. If I touch the notification, it takes me to sync settings. I try to log in (same username and password), but it says "Could not sign in".
if I look in my Android settings, I have two "accounts" - one for Release and one for Aurora - and _both_ claim that they most recently synced 5 minutes ago! But I made an update to my bookmarks on desktop 10 minutes ago, and it's appeared in Release but not in Aurora. So the Aurora "last sync time" seems to be a lie.
The reason I'm on SUMO is that I don't know if this is a supported configuration. I remember with old sync there were some rules about whether you could have multiple copies of Firefox on the same device. Is this a supported configuration? If so, should I file a bug or have I missed something here?
Gerv

HI Snickers,
There is an option to sync tabs. About:sync-tabs works on the desktop and can see the tabs from that device however this feature is not available for the mobile device. However from an active sync the current sessions are visible from the desktop page.
In order to restore a session you may be able to restore the session if it crashed. [https://support.mozilla.org/en-US/questions/1026370#answer-644109 With these instructions]

BizTalkServer 2010 SFTP Adapter from CodePlex - Configuring send and receive locations with SSH public and private keys

Hi there,
I am looking for step by step instrcutions on how to configure SFTP Codeplex adapter for both receive and send ports.
Out business partner with whom we push/poll the files from wants us to use SSH encryption/decryption etc.
Just wondering if the following functionality is supported in Codeplex SFTP adatper without having to write any code.
Appreciate if there is manaul to do this for SFTP. BTW I do have all the our public and private keys and business partners Public key for configuring.
For Send port: 1. we would need to encrypt the file with our business partners public key
                      2. sign the file with our private key.
                      3. Send the file through to SSH client which eventually transfers to Remote server.
Receive port:   1. Connect to SSH Server with SSH-2 key and receive the file
                      2. Verify the file's digital signature agaisnt the Business partners PGP public key
                      3. Decrypt the file using our PGP Public key
Thanks in advance

Yes it is supported.
You can find its documentation in this link
You can find section X.509 Certificate Identity Keys
You can set public and private key in property SSH Identity thumbprint of send and receive port
I prefer to test it using client tool like
FileZilla or WinSCP then test it using sftp adapter
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Intermittent problem with cross dissolve and chroma key

It seems that in 1 out of 10 videos I produce in Final Cut Pro there is a problem with the cross dissolve effect and chroma key. What happens is that during the cross dissolve, clip A fades out with a green tint and clip B fades in with a green tint.
Today I am working with two videos that I captured using the same work flow on the same day. One project exhibits the tint while the second project does not. If I import the problematic footage into the good project the tint problem follows the footage. In the good footage, the cross dissolve produces a result that does not have a green tint. If I re-capture the "bad" footage the results are the same.
Has anyone else experienced this and does anyone have an idea how to resolve this problem?
Thank you.
Dual G5 Mac OS X (10.4.6)

In my project, both clips are source clips with Chroma, Color Smoothing and Matte Choker applied. A dissolve from non-chroma clip to chroma clip works fine. Only problem is with two chroma clips. In my dissolve, the error appears as red fringing in the area between the two masks.< </div>
You're using creative shorthand that doesn't help. "Chroma clip" means the clip to which you have applied all of these effects? What masks? Where are you getting the masks?
To understand what's going on with all them itty bitty pixels in a stack of interactive effects, do me a favor: render out a short piece, say 10 seconds of each of your chromaclips as separate movies over transparency using the Animation codec. Reimport them and put them over a solid colored Dissolve between them using different types of dissolves. Post back and tell us (me) what's going on.
I still consider this to be a bug -- nesting adds more steps to the workflow than if this bug did not exist. < </div>
It's not a bug. Your pixels are running down a pathway. It's a question of building the correct pathway and having the correct pixel wranglers with the right kinds of cattle prods.
bogiesan

Problem with Energy Management and One key Theater

I have a Lenovo G560 laptop. Actually, I have first installed Windows 7 x64 on my lappy but it caused many problems so I again reinstall windows 7 32 bit. But now Energy Management and One key theater are not working at all.
Is there any fix for it???

As I understand you are unable to use OneKey Theater and Lenovo energy management.
The installation of both OneKey Theater and Power Management are necessary for using OneKey Theater. Through "Start" à "All Programs" à "Lenovo", or "Start" à "Control Panel" à "Programs" à "Programs and Features", you can find out whether OneKey Theater has been installed.
If it has been installed, you need to make sure the following two items has been started in “Start à Run à msconfig à Startup”
After that, if OneKey Theater is still unable to be started, you can run it manually by double clicking "Onekey Studio" through "Local Disk(C" à "Program Files" à "Lenovo" à "OneKey Theater".
If OneKey Theater has been started, you can see "Onekey Studio.exe" under the "Processes" tab of "Windows Task Manager".
OneKey Theater can be download from the mentioned below web link.
http://consumersupport.lenovo.com/in/en/driversdownloads/Drivers_Show_2651.html
Lenovo energy management software can be download from the mentioned below web link.
http://consumersupport.lenovo.com/in/en/driversdownloads/Drivers_Show_2604.html
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HUB showing contact number with country code and not with its name..blackberry Z10 STL100-2

I have an issue with Text Messages and call lists, in my blackberry Z10 (STL100-2), which is, If I have not saved my contact numbers without country code, the msg may appear in local formate (w/o country code), and it also appear as International formate (another times), and though the number is same (only saperate is country code) in the hub, it appear as two conversation. for eg: if I sent txt to 9899100 (w/o country code), reply used to come as +960-9899100. or vice-versa.
So its very difficult. and here i came for help.
You might know a lot what we do not know as we do know a lot you do not know. Asking is the way to get to know....

The movies were all on my SD card. They are also not backed up by Link which is why had them synced to my phone as a poor man's backup.
So either Link did not backup the necessary licensing information in the main memory of my phone, or Link did not synchronize the necessary licensing information off my SD card. Either way I am stuck with 3 movies that I cannot play, because I can no longer find them in the BlackBerry World store to re-dowbload whatever licensing information is needed.
I even just tried a media restore from Link because it was 138 MB in size (and in don't normally store anything on my phone's main storage), but alas no licensing information was restored.

ECO number with revision level and release key

Similar Messages

Maybe you are looking for