Econo mode and turbo is not working on my MSI Gx620 windows 7 32bit

econo mode and turbo is not working on my MSI Gx620 windows 7 32-bit.
I just bought my laptop yesterday and instantly installed a windows7 32 bit  os, everything is working fine but the econ mode and turbo mode is not working.
can you pls tell me some basic points why is it not working on my laptop??

install scm: http://eu.msi.com/index.php?func=downloadfile&dno=10455&type=utility

Similar Messages

  • Yoga 2 Pro tent mode and auto-rotate not working

    I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
    When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
    Auto-rotate does not work at all now. The screen is un-locked.

    Dear NX3
    Welcome to Lenovo forums
    Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
    http://support.lenovo.com/us/en/downloads/ds038767
    Thanks
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Firefox will not start, will not open in safe mode, and still will not work after clean reinstall, Mac/OSX

    One moment I was using Firefox the same as I always have. The only difference was that I changed the preferences to erase history when quitting Firefox. When trying to open the program again, it is immediately unresponsive. I attempted opening it in safe mode and a window will appear but never load, and Firefox remains unresponsive. I could not reset Firefox either. I deleted the application and re-downloaded Firefox, but it changed nothing. I am in OSX 10.7.4. Can anyone help?

    Hello chillman4130, try to create a new profile(in case that you profile is corrupted), go (with closed firefox...... it is anyway) to /Applications/Utilities > Open the Terminal application > in the Terminal application, enter the following:
    * /Applications/Firefox.app/Contents/MacOS/firefox-bin -p
    Press Return
    the above opens Profile Manager, if the profile manager open then see : [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles#w_creating-a-profile Creating a profile]
    then see: [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile Recovering important data from an old profile]
    http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    thank you

  • Plug and play speakers not working properly after upgrading to Windows 8.1

    After upgrading to Windows 8.1, my plug and play speakers do not work properly.  I have uninstalled and reinstalled them, and restarted.  When I try to play music, nothing comes out.  If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound.  They worked fine until I upgraded to Windows 8.1.  The manufacturer has not been able to successfully assist me.  Has anyone else reported a similar issue after upgrading OS software?  Any suggestions?  These are fairly new speakers, less than 2 years old, and not used very much.  I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard).  Any suggestions would be greatly appreciated.

    @sisboldt ,
    Hello and thank you for posting on the HP support forums.
    So that I can better help you with your sound issue.  Please post back with your full model and product number.  Use this link to help you find the information.
    HP Notebook PCs - How Do I Find My Model Number or Product Number?
    Here is another link you may find useful.  Please give it a read before posting back with your system information.
    Advice for asking the "Very Best Question"
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Camera Raw 5.1 downloaded and unzipped but not working in CS4. Can't open Nikon D90 NEF files.

    Camera Raw 5.1 downloaded and unzipped but not working in CS4. OS Windows 7. Can't open Nikon NEF files. Camera Nikon D90.

    update the adobe program that needs cr 4.6+,  http://www.adobe.com/downloads/updates/

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.

  • My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

  • HT201412 my device was updated and now is not working anymore, it is in recovery mode all the time

    my device was updated and now is not working anymore, it is in recovery mode all the time.
    what can i do???

    Delete the shortcut you have at the moment and then create a new one as follows:<br><br>
    #Use Windows Explorer to navigate to C:\Program Files\Mozilla Firefox.<br><br>
    #Right click '''firefox.exe''' and choose '''Send To''', then '''Desktop (Create shortcut)'''<br>
    Bear in mind that you're using an BETA version of Firefox and you're likely to encounter similar issues in the future.

  • Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

    I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command PromptStep 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter  reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  

  • My Ipod touch recently fell into water, but once dried, it worked with seemingly little to no problems. Today, after working for at least an hour, the screen froze and is now not working, but the sounds are still functioning.

    I accidentally dropped my Ipod into the lake, at the beach yesterday, but i caught it early and it wasn't too soaked... i wiped it off for the most part, and most of the buttons and the screen worked fine! i was shocked, and there were a few glitches with the camera and the slide button on the lock screen, but otherwise it was greatly intact! so i gave it a rest, put it in my purse, and picked it up fifteen minutes later, and it was working 100% normally again! when i got home a few hours later, i put it in rice for a few hours, taking it out every once and a while to check my notifications... it still seemed to be working perfectly, so i just set it down out of the rice, assuming the moisture was gone. this morning, again, everything was working normally, no glitches, UNTIL, i opened my instagram app, and the screen froze, and it seemed like it had two separate screens, and i held the Sleep button down until the screen went black... then i tried turning it back on, etc. and it still didn't work, and so i plugged it into the computer, holding down the sleep and home buttons, and itunes identified it as in recovery mode, and started updating. i tried again to press the sleep and home butttons, maybe pressing only the home button, because I heard the Siri noise, as well as the charging sound, but the screen was still black.... i checked my iTunes, and lo and behold, it had identified my iPod, and synced it to the computer, as if it were normally functioning. However, the screen is still not working, and Siri is not working either. The sounds may be the only thing that's functioning. Should i send it in?

    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G, $99 for the other 4Gs, $99 for the 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
      Apple - iPod Repair price
    Sometime it takes a little while for the water to damage the iPod.

  • Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

    Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
    Attachments:
    PWMs.vi ‏130 KB

     other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

  • My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me

    My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me

    I've done all of these, even trying a different USB port, and still, nothing. This is really confusing. Windows 8.1 said something to do with USB malfunction or something and nothing works. I need to restore my iPhone quickly and nothing has happened. My cable is not genuine Apple product. iTunes makes the noise that it makes when I connect the device, but it doesn't say 'iPhone is in recovery mode' or even say 'iPhone' in the corner. I am really fed up and would really appreciate a response.
    Thanks,
    Nathan.

  • MacBook doesn't turns into sleep mode and swop doesn't work.

    MacBook doesn't turns into sleep mode and swop doesn't work.
    Can you help me please. I have a MacBook Pro 8.2. I reinstalled OS X to make swop file working, but it still doesn't work. I reinstalled OS X from Internet recovery.
    Start time: 10:31:02 03/15/15
    Model Identifier: MacBookPro8,2
    System Version: OS X 10.10.2 (14C109)
    Kernel Version: Darwin 14.1.0
    Time since boot: 3 minutes
    Memory
        BANK 0/DIMM0:
          Size: 4 GB
          Speed: 1333 MHz
          Status: OK
          Manufacturer: 0x029E
        BANK 1/DIMM0:
          Size: 4 GB
          Speed: 1333 MHz
          Status: OK
          Manufacturer: 0x029E
    SerialATA
       TOSHIBA MK5065GSXF                     
    Diagnostic reports
       2015-03-15 Boom 2 crash
       2015-03-15 com.apple.internetaccounts crash
    Log
       Mar 15 10:26:10 memorystatus_thread: idle exiting pid 546 [tccd]
       Mar 15 10:26:11 memorystatus_thread: idle exiting pid 547 [nsurlstoraged]
       Mar 15 10:26:12 memorystatus_thread: idle exiting pid 544 [soagent]
       Mar 15 10:26:13 memorystatus_thread: idle exiting pid 548 [nsurlstoraged]
       Mar 15 10:26:43 memorystatus_thread: idle exiting pid 556 [com.apple.CodeSi]
       Mar 15 10:26:44 memorystatus_thread: idle exiting pid 558 [accountsd]
       Mar 15 10:26:45 memorystatus_thread: idle exiting pid 553 [com.apple.iCloud]
       Mar 15 10:26:46 memorystatus_thread: idle exiting pid 561 [networkd_privile]
       Mar 15 10:26:47 memorystatus_thread: idle exiting pid 555 [secinitd]
       Mar 15 10:26:48 memorystatus_thread: idle exiting pid 560 [tccd]
       Mar 15 10:26:49 memorystatus_thread: idle exiting pid 562 [secd]
       Mar 15 10:26:50 memorystatus_thread: idle exiting pid 554 [com.apple.intern]
       Mar 15 10:26:51 memorystatus_thread: idle exiting pid 565 [nsurlstoraged]
       Mar 15 10:26:52 memorystatus_thread: idle exiting pid 563 [soagent]
       Mar 15 10:26:53 memorystatus_thread: idle exiting pid 551 [syncdefaultsd]
       Mar 15 10:26:54 memorystatus_thread: idle exiting pid 557 [CoreServicesUIAg]
       Mar 15 10:26:55 memorystatus_thread: idle exiting pid 567 [iconservicesd]
       Mar 15 10:26:56 memorystatus_thread: idle exiting pid 566 [iconservicesagen]
       Mar 15 10:26:57 memorystatus_thread: idle exiting pid 568 [systemstatsd]
       Mar 15 10:26:58 memorystatus_thread: idle exiting pid 550 [cfprefsd]
       Mar 15 10:26:59 memorystatus_thread: idle exiting pid 552 [cfprefsd]
       Mar 15 10:27:00 memorystatus_thread: idle exiting pid 549 [coreduetd]
       Mar 15 10:27:01 memorystatus_thread: idle exiting pid 564 [nsurlstoraged]
       Mar 15 10:28:18 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
       Mar 15 10:29:09 proc 316: load code signature error 4 for file "Boom 2"
    I/O per process: coresymbolicati (UID 0) is using 15 MB/s
    kexts
       com.globaldelight.driver.Boom2Device (1.1)
    Daemons
       com.apple.installer.osmessagetracing
    Agents
       com.apple.AirPortBaseStationAgent
       com.globaldelight.Boom2Daemon
    Extensions
       /Library/Extensions/Boom2Device.kext
       - com.globaldelight.driver.Boom2Device
       /System/Library/Extensions/EPSONUSBPrintClass.kext
       - com.epson.print.kext.USBPrintClass
       /System/Library/Extensions/JMicronATA.kext
       - com.jmicron.JMicronATA
    Applications
       /Applications/Boom 2.app
       - com.globaldelight.Boom2
       /Applications/Boom 2.app/Contents/Library/LoginItems/Boom2Daemon.app
       - null
    Bundles
       /Library/Printers/Canon/BJPrinter/Plugins/BJNP/CIJNetworkIOM.plugin
       - jp.co.Canon.ij.print.iom.CIJNP
       /Library/Printers/Canon/BJPrinter/Plugins/BJNP/CIJNetworkPBM.plugin
       - jp.co.Canon.ij.print.pbm.CIJNP
       /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/BJUSBIOM.plugin
       - jp.co.canon.bj.print.bjusbiom
       /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/BJUSBPBM.plugin
       - jp.co.canon.bj.print.pbm.USB
       /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/CIJUSBClassDriver.plugin
       - jp.co.canon.ij.print.CIJUSBClassDriver
       /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/CIJUSBClassDriver2.plugin
       - jp.co.canon.ij.print.CIJUSBClassDriver2
       /Library/Printers/Canon/BJPrinter/Plugins/IJBluetooth/IJBluetoothIOM.plugin
       - jp.co.canon.ij.print.ijbluetoothiom
       /Library/Printers/EPSON/CIOSupport/CIOHelper.plugin
       - com.epson.print.plugin.CIOHelper
       /Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin
       - com.epson.print.plugin.USBPrintClass
       /Library/Printers/EPSON/CIOSupport/XIOP.plugin
       - com.epson.print.plugin.XIOP
       /Library/Printers/EPSON/CIOSupport/XIORemoteClient.plugin
       - com.epson.print.plugin.XIORemoteClient
       /Library/Printers/EPSON/CIOSupport/XIORemoteServer.plugin
       - com.epson.print.plugin.XIORemoteServer
    Restricted files: 219
    Elapsed time (s): 238

    Remove "Boom" and test.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
    Back up all data before making any changes.
    You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

  • My iphone 5 iso 7.1 turbo sim not working hotspot

    my iphone 5 iso 7.1 turbo sim not working hotspot

    This is so unfortunate.  Holmdel, I would also report this to Apple to have it on record. 
    You can make Apple aware of this at: http://apple.com/feedback/iphone.html, and in the meantime you'll have to use AssistiveTouch.  Hopefully when more people come forward, they will fix this bug in the next update.

Maybe you are looking for