ECP Page not loading after installing SP3 on Exchange 2010 CAS&HUB Server

I have installed SP3 on my Exchange CAS Server after that OWA was not working, hence I have reset owa, ecp,ews,oab, autodiscover & active sync virtual directory from EMC. After that OWA is started working.
But While accessing ECP , content is not loading properly. I have reset virtual directory of ecp 2 times but problem is still same.
Kashi

Did you tested different browser?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

PE 9 will not load after installing Elements 10

Installed Elements 10 on Vista 64-bit. Did not uninstall Elements 9. Now PE 9 will not load; get window Adobe Premiere Elements.exe - No Disk. There is no disk in the drive. Please insert a disk into drive\Harddisk2\DR2. Tried disk 2 of 3 from package, nothing happens.

Tried twice, PE9 still locked up both times - I think the intent is to have me try PE10, because that did work!!!
From: Steve Grisetti
Sent: Monday, January 02, 2012 7:09 PM
To: cptiger
Subject: PE 9 will not load after installing Elements 10
Re: PE 9 will not load after installing Elements 10
created by Steve Grisetti in Premiere Elements - View the full discussion

Installing SP3 on Exchange 2010 - Error

Hi,
I'm getting an error message when trying to install SP3 on Exchange 2010.
I am currently running: Exchange 2010 SP1 - Windows Server 2008 Ent. 2 nodes, DAG
"The server side error is: 0x21a2 The FSMO role ownership could not be verified because its directory partition has not replicated successfully with at least one replication partner."
So I ran dcdiag, and sure enough I get a replication error, several of them actually:
"The failure occurred at 2014-02-11 13:54:23.
            The last success occurred at 2013-05-30 00:51:00.
            32 failures have occurred since the last success.
         [Replications Check,EXCHANGE2010] A recent replication attempt failed:
            From EXCHANGE2010-2 to EXCHANGE2010
            Naming Context: CN=Schema,CN=Configuration,DC=mydomainname,DC=lcl
            The replication generated an error (8614):
            The directory service cannot replicate with this server because the time since the last replication with thi
s server has exceeded the tombstone lifetime."
The thing I'm not understanding is this: When I check the EMC looking at the DAG tab, it looks as though everything with the DAG is fine. Also, when I check the Organization Config->Mailbox, both copies of the Database seem to be Healthy.
So, I guess what I'm asking is what can be causing this error message and what steps can I take to try to fix it? I'm not an expert at this, which I guess is clear since I'm posting here!
Thanks,
mike

Thanks DarDevil,
Before you replied I came across an article that suggested I could force a replication.
So I ran the command they listed: ‘repadmin /syncall /AeD
It seemed to have worked, as I am now able to install SP3, which was the thing I was trying to do all along. I'm testing SP3 on this test system before I install on production.
Any particular reason not to run the force replication command above? Before running the command, I put in a registry key that would allow it according to another article I read. I have since removed the key.
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Allow Replication With Divergent and Corrupt Partner
Thanks!

Images do not load after XP SP3 install. IE works fine :-(

I installed XP SP3 last night and now images do not load in web pages. Not all images do not load but Players photos on PGATOUR.com and item images on Ebay and item images on Amazon.com. You can click the images in Ebay you get a popup window with grey type saying 'Image is not available. I just updated Firefox, Updated Adobe per Firefox recomendation, updated Java per firefox recomendation but still no images.
Hate to go back to IE as I have been very happy with FireFox.

Here is the error i get when i run Debug (ctrl+Shift+Enter)
It works fine inside of flash but outside of flash or the published swf calls an error.
Attempting to launch and connect to Player using URL C:\Users\oussiden\Documents\flash tutorial\imgmove\test3.swf
[SWF] C:\Users\oussiden\Documents\flash tutorial\imgmove\test3.swf - 83667 bytes after decompression
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
when i troubleshoot i found that when i comment the second line out the error disapears.
myLoader.load(new URLRequest("img/pictures.xml"));
myLoader.addEventListener(Event.COMPLETE, image.processXML); // when i comment this out the error disapears

Hp software interface does not load after installing printer 6500A plus

I own a 6500A plus printer that is connected via wifi to my windows 8.1 laptop. At certain point in time the desktop icon stopped functioning, i.e double cliking it does not do anything. The same happens if i do that through start->programs->hp...
more info:
1. running HP Officejet 6500 E710n-z.exe from the install folder does nothing (also when running as admin)
2. installation of the software (the full package) completes with no errors
3. printer prints fine and scans throught the printer interface wihtout a problem
4. tried uninstall and reinstall 2-3 times, both as a wireless printer and USB printer, no errors during install
5. The hp print and scan doctor, finds no problem and at the end im able to run Test Scan and the interface opens and works fine.
6. i ran sfc /scannow it says it founds some problems it cant repair - dont know if it means anything
7. in the Devices and Printers screen i see the printer listed and i'm able to print a test page
dontknow what to do next

Hello Salmonela,
Welcome to the HP Support Forums!
That is a very well done post, very informative. Regarding the software interface not loading, I would like to suggest a means of uninstall and install that you may not have tried.
I would like you to use the Microsoft Fixit to uninstall. Then use the HP Printer Install Wizard to install the software again.
Let me know if this clears things up.
Happy Turkey Day!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

PSF's not loading after installing Lion

Email's and other documents PDF's are not downloading since installing LION

OK in Mail (I am assuming you are using the Mail App) once you see the pdf file on the screen you can right click it and choose the appropriate option. Here is a sample of the bottom of an email I recieved yesterday show what it looks like after I highlighted the file and right clicked it:
From there simply choose the option you want.
NOTE!!!!!: If you are not using the OS X Mail App please advise which email tool you are using.

Failure installing SP3 on Exchange 2010

Good evening,
Following TechNet closely I'm currently in the process of moving my exchange 2010 environment to 2013. I have single exchange server on a SBS 2011 box. Sadly I've failed at the first hurdle installing SP3, the result is that my Exchange 2010
is refusing all client connections.
During the SP3 install I passed all prerequisites but during the actual upgrade it failed at the Hub Transport Role with the following error:
Summary: 8 item(s). 3 succeeded, 1 failed.
Elapsed time: 00:20:46
Language Files
Completed
Elapsed Time: 00:10:25
Restoring services
Completed
Elapsed Time: 00:00:02
Languages
Completed
Elapsed Time: 00:03:32
Hub Transport Role
Failed
Error:
The following error was generated when "$error.Clear();
          Write-ExchangeSetupLog -Info "Creating SBS certificate";
          $thumbprint = [Microsoft.Win32.Registry]::GetValue("HKEY_LOCAL_MACHINE\Software\Microsoft\SmallBusinessServer\Networking", "LeafCertThumbPrint", $null);
          if (![System.String]::IsNullOrEmpty($thumbprint))
            Write-ExchangeSetupLog -Info "Enabling certificate with thumbprint: $thumbprint for SMTP service";
            Enable-ExchangeCertificate -Thumbprint $thumbprint -Services SMTP;
            Write-ExchangeSetupLog -Info "Removing default Exchange Certificate";
            Get-ExchangeCertificate | where {$_.FriendlyName.ToString() -eq "Microsoft Exchange"} | Remove-ExchangeCertificate;
            Write-ExchangeSetupLog -Info "Checking if default Exchange Certificate is removed";
            $certs = Get-ExchangeCertificate | where {$_.FriendlyName.ToString() -eq "Microsoft Exchange"};
            if ($certs)
              Write-ExchangeSetupLog -Error "Failed to remove existing exchange certificate"
          else
            Write-ExchangeSetupLog -Warning "Cannot find the SBS certificate";
        " was run: "The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.".
The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:06:46
Client Access Role
Cancelled
Mailbox Role
Cancelled
Management Tools
Cancelled
Finalizing Setup
Cancelled
The setup log shows the following details:
Ending processing Get-ExchangeCertificate
[07/31/2013 20:50:46.0516] [1] The following 1 error(s) occurred during task execution:
[07/31/2013 20:50:46.0516] [1] 0. ErrorRecord: The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.
[07/31/2013 20:50:46.0516] [1] 0. ErrorRecord: System.InvalidOperationException: The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.
[07/31/2013 20:50:46.0531] [1] [ERROR] The following error was generated when "$error.Clear();
          Write-ExchangeSetupLog -Info "Creating SBS certificate";
          $thumbprint = [Microsoft.Win32.Registry]::GetValue("HKEY_LOCAL_MACHINE\Software\Microsoft\SmallBusinessServer\Networking", "LeafCertThumbPrint", $null);
          if (![System.String]::IsNullOrEmpty($thumbprint))
            Write-ExchangeSetupLog -Info "Enabling certificate with thumbprint: $thumbprint for SMTP service";
            Enable-ExchangeCertificate -Thumbprint $thumbprint -Services SMTP;
            Write-ExchangeSetupLog -Info "Removing default Exchange Certificate";
            Get-ExchangeCertificate | where {$_.FriendlyName.ToString() -eq "Microsoft Exchange"} | Remove-ExchangeCertificate;
            Write-ExchangeSetupLog -Info "Checking if default Exchange Certificate is removed";
            $certs = Get-ExchangeCertificate | where {$_.FriendlyName.ToString() -eq "Microsoft Exchange"};
            if ($certs)
              Write-ExchangeSetupLog -Error "Failed to remove existing exchange certificate"
          else
            Write-ExchangeSetupLog -Warning "Cannot find the SBS certificate";
        " was run: "The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.".
[07/31/2013 20:50:46.0531] [1] [ERROR] The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.
[07/31/2013 20:50:46.0531] [1] [ERROR-REFERENCE] Id=SbsBridgeHeadComponent___6464a0ee0fd04f6b893a3c81d7eb3f26 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup\SBS
[07/31/2013 20:50:46.0531] [1] Setup is stopping now because of one or more critical errors.
[07/31/2013 20:50:46.0531] [1] Finished executing component tasks.
[07/31/2013 20:50:46.0594] [1] Ending processing Install-BridgeheadRole
My application event log is flooded with the following error:
Log Name:      Application
Source:        Microsoft-Windows-IIS-W3SVC-WP
Date:          31/07/2013 21:59:43
Event ID:      2280
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SRV-SBS.lawrencedavid.local
Description:
The Module DLL C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\auth\exppw.dll failed to load. The data is the error.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
    <EventID Qualifiers="49152">2280</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-07-31T20:59:43.000000000Z" />
    <EventRecordID>975085</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>SRV-SBS.lawrencedavid.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="ModuleDll">C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\auth\exppw.dll</Data>
    <Binary>05000000</Binary>
</EventData>
</Event>
I've tried to re-register exppw.dll following instructions in the TechNet forums but this hasn't helped to restore functionality or complete the SP3 installation. Any guidance would be most appreciated. Thanks in advance!

Hi RicChapman,
From the event log files, I recommend you do as follows to check the result.
1.disabling all the exchange services
2.clearing both the apps and system logs
3.restarting the server
4.reinstall the Exchange 2010 SP3
Here are some case threads for your reference.
exchange 2010 SP2 failed in SBS 2011 Standard Ed
http://social.technet.microsoft.com/Forums/en-US/018bacbd-cbec-4117-82e2-7247eba57099/exchange-2010-sp2-failed-in-sbs-2011-standard-ed
The Module DLL C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\auth\exppw.dll failed to load
http://social.technet.microsoft.com/Forums/exchange/en-US/686d1a90-a016-4a4c-ae2e-6725914a5d5a/the-module-dll-cprogram-filesmicrosoftexchange-serverv14clientaccessowaauthexppwdll-failed
Additional article for your reference.
Exchange Server 2010 is in evaluation mode after installation or repair in SBS 2011 Standard
http://support.microsoft.com/kb/2527626
Hope it helps.
Best regards,
Amy

Outlook 2010 SP1 Profile Does Not Update After Moving Mailbox Between Exchange 2010 SP2 Sites

I am working on a large mailbox migration from one AD site to another.
Exchange version at both sites:Exchange 2010 SP2
Two Mailbox Servers: MBX01 in site A / MBX02 in site B
(There is a DAG but keeping this simple)
Two CAS Arrays: CASA.domain.com / CASB.domain.com
The RPCClientAccessServer property is set accordingly. Where MBX01 is set to CASA.domain.com and MBX02 is set to CASB.domain.com
Clients:Outlook 2010 SP1
Scenario: I successfully move a mailbox from Site A to Site B. The Outlook client does not automatically update its server settings to point to the new cas array (CASB.domain.com) and continues to connect to the old CAS server (CASA.domain.com).
I have seen a few articles regarding this pointing to workarounds such as:
- repairing the outlook profile on the client
- delete the existing outlook profile
- run a script to update the prf file (re-cache's email at the client)
I am interested in knowing if anyone else has experienced this, what their solution was for a large migration and if any roll-ups or service packs have possibly fixed this problem.
I would also like to know if you have seen this affect ActiveSync devices. I am getting mixed results in my tests and thought it may be contributed toward different device types, mobile os versions, etc...
I have posted this to the Exchange 2010 forum as well, just wasn't sure where to start.
Thanks.
Mike

Hi,
Seems you got several replies in the thread below that you posted in Exchange forum:
http://social.technet.microsoft.com/Forums/exchange/en-US/68ae67c1-59f5-44bb-aadc-0aea3f72ad2d/outlook-profile-not-updated-to-new-cas-array-after-mailbox-move-between-sites?forum=exchange2010#68ae67c1-59f5-44bb-aadc-0aea3f72ad2d
Please come back to the thread above and check if the replies are helpful.
Since this issue is more related to Exchange, we can provide rarely assistance on this problem. If you need any help on Outlook client side, please don't hesitate to let me know.
I would appreciate it if you could post the solution here when you found it, so that other community members who have same question in this forum will benefit from it.
Best Regards,
Steve Fan
TechNet Community Support

Trying to install SP1 for Exchange 2010 on Win Server 2008 R2. A pre-req is KB982867. It is no where to be found. How to find it?

The SP1 wizard says "Install Hotfix Microsoft Knowledge Base article 982867 from http://code.msdn.microsoft.com/KB982867
However, that link no longer exists.
How to get this hotfix?
Another post said that the Win 7 hotfix would work. Windows6.1-KB982867-v2-x64 But I can't locate that either.
How to fix?
john11

Hi John,
Exchange 2010 Service Pack 3 is the latest service pack. It is recommended to install it. Service Packs are cumulative, Exchange 2010 SP3 includes all fixes included in previous RUs and service packs. Here is a blog for your reference:
Exchange Server 2010 SP3
http://blogs.technet.com/b/exchange/archive/2013/02/12/released-exchange-server-2010-sp3.aspx
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Flash not loading after install...

Snow Leopard was working perfectly until the most recent update. When I initially upgraded, I updated flash, as we know snow leopard shipped with the previous version of flash. However, after Apple released an update to address flash and other security updates, flash only loads occasionally. I notice more when trying to view youtube videos. The videos don't fully load and I have to constantly try and refresh the page until it eventually loads. Anybody else experiencing this issues or have come up with a solution??
Thanks.

Hi,
*"as we know snow leopard shipped with the previous version of flash"*
You didn't need to update your flash plugin afer installing SL.
Go here and follow the instructions to UNinstall Flash Player
http://kb2.adobe.com/cps/141/tn_14157.html
Then reinstall Flash player.
Carolyn

Safari will not load after installing OSX 10.7.5

I recently replaced the hard drive and reinstall MAC OSX 10.7.5 and migrated the the data successfully. Did all the software updates. All software and apps work except Safari. Safari will not open. I did a few of the recommended tips on the discussion boards on here but none of them has worked. I went to ~/library/Preferences and put the com.apple.safai.plist on my desktop and tried relaunching safari. Same issue. I unistalled Safari from my applications folder using appzaper and then reinstalled it. Still same issue. One tip was to restore the system. Unfortunetly this system does not have a time machine backup so that will not work. What other tips do you all suggest i try? I'm currently running Safari version 6.0.2

First, delete the Safari application.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

PSE 12 Organsizer Will Not Load after Install

I've uninstalled PSE9 and installed PSE12. The basicintroduction menu loads and the editor menu, however the Organizer just will not open eoither direct or via the editor?
I'm running windows 7, I have tied 3 times reinstalling etc to no avail...? Any ideas

Having the same problem, "windows cannot locate Photoshop Elements 12.0.exe" Is that happening to you Rockhopper? Also having constant issues with the editor, even in 11, seems to stop working. Opens the window for editor but no photo shows up and then the window switched back to the organizer.

Alignment page not printing after installing new cartridge

I just installed a new ink cartridge on my 1210 printer and the cartidge alignment page will not print. My printed docs look like I am using a shadow font.
How do I get the alignment page to print?

This document may help:
alignment problems
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

IPhoto not loading after installing Mavericks

Hello, I have just took ownership of a secondhand macbook pro (october 2011 model - 15.4) ... it came complete with applecare and im very happy with it, it came set back to factory settings and ive installed the operating system that came inbuilt to the machine (osx7.5) .. however i have just updated to mavericks and the iPhoto is not functioning ..the camera icon has a line through it and when I go to update as suggested in the app. store the previous users Apple id name cannot be removed and it wont allow me to update it under my apple ID .. I am prepared to pay for this application but cant even buy or download it off apples site, any advise on how I can get iPhoto (the main reason for me buying a macbook) would be much appreciated
thanks for your time, Robert

Hi robertdurkin,
If you are having issues with the previous owner's software and/or Apple ID remaining on your new Mac, you may want to make sure that you did a full format and install of the OS. You may find the following article helpful:
Apple Support: What to do before selling or giving away your Mac
http://support.apple.com/kb/ht5189
Regards,
- Brenden

Pages not loading after pressing the enter button

when i write some adress into the navigation panel and press enter nothing happens. Pages doesn`t start to load even from the history. Only thing that works are bookmarks, they load on, and I can browse the internet from the sites. By the way, the enter button works in other programs well. Thanks for ideas

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

ECP Page not loading after installing SP3 on Exchange 2010 CAS&HUB Server

Similar Messages

Maybe you are looking for