ECS value not appearing in J1IIN after upgrade to ECC 6.0 from 4.72

Hi Experts
All the objects corresponding to ECS are restored to original i.e. ECC 6.0 during SPAU modifications. We are able to find the ECS value appearing in the new version for the existing billing docs whereas when we try to create a new billing doc in J1IIN, ECS value is calculated as '0.00'. We have checked with the sale order and billing doc where ECS is populated as expected.
Kindly provide us with some inputs to resolve.
Regds
Priya G

1) Maintain the view J_1IEXCDEF for switching on NCCD indicator for the ex reg.
2) Activate ECS for the same reg in view J_1IREGSET.
Regds
kartik

Similar Messages

  • Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)

    Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)
    Are others having the same problems?

    Try this. Worked for me.
    - turn off your router
    - turn off you Mac's after removing all available printers
    - turn off all iDevices
    - do a factory reset of your printer remove all cables min. 30 sec.
    - turn on your router first
    - ran the network set up wizard
    - give your printer also a new name like "DeskJet 2015"
       Something which you don't have used before.
    - turn on your Mac's and add your printer
    - turn on your iDevices at least.
    Should work after these steps.
    It worked for me including all iDevices.
    iOS and Yosemite

  • BED value not appearing in J1IIN

    Hi Experts,
    Currently I am into an implementation project and I am configuring CIN.My tax procedure is TAXINN. But after doing all the configuration, while doing J1IIN, BED value in invoice is not appearing in BED field (J1IIN Screen). However Edu Cess and Hr Edu Cess  value is flowing properly in their respective field. I am using std condition for BED (JEXP) and I have already maintained this condition in Logistic General-Tax on Goods mov-IndiaBasic settingdetermination of excise duty--- maintain excise default.
    configuration are given below
    excise registration--- copy from std (1)
    company code -- copy from std (IN01)
    plant setting -- (single goods receipt)
    maintain series grp
    maintain excise grp
    Tax calculation procedure -- TAXINN (country IN)
    Maintain excise default ---
    Tax Proc  CVD            Tax Jurid                                             A/R BEDCond                              BED Perc
    TAXINN     JCV1            9900     JMO1     JSO1   JAO1         JEXP                       JCES        JEXP     JAED     JSED     
                                                ECS A/R    ECS perc   ECS Cond               A/R AT1 Cond      AT1 Perc
    JCED                                         JECT     JECT     JECT                       JA1X                     JA1X                
    Classify Cond Type----
    Procedure                  Condition Type                    Condition Name
    TAXINN                       JEXP                                A/R BED Percentage
    TAXINN                       JECT                                A/R ECS Percentage
    TAXINN                       JA1X                               A/R AT1 Total
    Please tell me if I am missing anything.
    Thanks & Regards,
    BKR

    Hi,
    In this case if your BED condition type is in 'Percentage' then please check your settings for 'Maintain Excise Defaults'.
    Here maintain your percentage BED condition type 'JEXP' in 'BED Per' column and maintain ' JEXT' which is a condition type for 'BED total' in the 'A/R BED cond' column.
    If you maintain these settings your values for BED will flow in J1IIN, But provided you have mainatined 'JEXT' condition type in your pricing procedure.
    Thanks & Regards,
    Rahul H.Dhole
    SAP SD Consultant

  • Distribution rule creation is not possible in CJIC after upgradation of ecc

    We are using  settlements for PS in ECC 6.0. Trying to partial settlement for WBS from CJ70 tcode, unable to find Final Settlement button/ icon where we give amount for settlement after some service patch upgrade .Can any one pls suggest any alternative /solution for this. Even it is same with T-Code CJIC too. your information we have undergone upgradation from 4.7 to ecc 6.0.we can be able to run these transactions in 4.7.I know this can be done through CJ88.But due some specific reasons i want to run these t-codes.(CJ70 & CJIC)
    Thanks in advance.
    regards
    Thanna

    No in addition to display ,you can maintain settlement rule also. In cj88 we are not able to settle by amount.so will maintain settlement rule by amount in cj70 & we will do settlement by cj88.this we did it in 4.7 version but after upgradation we could nt do it.
    thanks for your reply.
    regards
    hari

  • HT1473 Why my purchased music does not appear in iTunes after I tried to add it from my Mac?

    After I tried to add MP3 file into iTune using "Add to Library" and it does not appear in iTune....

    Hope this article helps you:
    http://support.apple.com/kb/TS1538
    Please reply with any further questions.

  • Photos do not appear in iPhoto after upgrade

    Hi,
    I have searched around and no one else seems to have encountered this problem. I upgraded my apple to a iMac with Leopard and iPhoto 08, from an old Tiger machine. I moved the iPhoto library into Pictures and then loaded iPhoto. I agreed to allow iPhoto to upgrade my library. I didn't notice at that point whether all the photos were in the library. I have imported 38 pictures from my camera and now, for some reason, these are the only photos in the library.
    When I look inside the library package, it has all of my photos in various places, and is almost 5GB in size, so I know the data is there. I have rebuilt the library, using cmd-option-iPhoto, but this has not changed anything.
    Does anyone have any idea as to what is happening, and what I might to do rectify the problem?
    Many thanks in advance.

    Do you still have a copy of the old library on the other machine? If so you can try the following;
    1 - move your current library to the desktop.
    2 - copy the old library into the Pictures folder.
    3 - run iRepair on the library as described below.
    4 - launch iPhoto and convert the library to the iPhoto 08 format.
    If that goes correctly you can then locate those 30 photos in the library on the desktop and import them into the new library. This will let you maintain your keywords, comments, slideshows, etc. from the old library.
    Here's how to run iRepair:
    Run iRepair on your iPhoto LIbrary package as follows:
    1 - download iRepair and launch.
    2 - click on the lock and enter your admin password
    3 - click on the Select button and navigate to and select the iPhoto library.
    5 - set the owner to your short admin name with read, write and execute privileges.
    6 - set group to staff or the current group with read, write and execute privileges
    7 - set others to read only
    6 - click on the Apply button.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Iphone 4 not recognised by laptop after upgrading Itunes, the itunes symbol and a usb cord has appeared on my Iphone 4 screen. Frustrated isn't the word.

    iphone 4 not recognised by laptop after upgrading Itunes, the itunes symbol and a usb cord has appeared on my Iphone 4 screen. Frustrated isn't the word.
    After installing latest version of Itunes, I connected my Iphone via USB and selcted yes to upgrade my Iphone, towards the end of the upgrade a notification popped up indicating that the upgrade had failed. Since then my Iphone just isn't responding, I've tried reinstalling Itunes, turning off Norton Security.
    Any help would be greatly appreciated.

    Thank you Carolyn,
    I've been through all those and apart from anything else, itunes is not seeing my phone, I therefore cannot restore the phone.
    Have tried deleting and reinstalling itunes in case something was missing there, though the fact the problem is on both my mac and my windows machine seems to me to suggest a phone problem..
    Is it possible that the latest IOS update which I did a week or so ago was not completed correctly? If so could this cause the problem? And how can I correct it?
    Many thanks

  • Scheduled jobs do not run as expected after upgrading to 10.2.0.3 or 4

    FYI, we've had a ticket open for several days because our scheduled jobs (dbms_scheduler) would no longer run as scheduled after an upgrade to 10.2.0.4 on HPUX, couldn't find the solution by searching in metalink, nor did I find it here or using Google - obviously I wasn't searching correctly. There is a note id that references a set of steps that appears to have resolved our problem. I am putting this note out here so that if you encountered the same difficulty you may come across this note earlier in your troubleshooting efforts rather than later. The full title of the note is: 'Scheduled jobs do not run as expected after upgrading to either 10.2.0.3 or 10.2.0.4'. The Doc ID is: 731678.1.

    Thanks - our ticket should be getting closed out on it (our dba will be updating it), the scheduler has been running reliably since we took the steps in the doc mentioned.

  • L.C value not appearing in MB51 report

    Dear gurus,
    The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

    Dear Jay,
    It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
    In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated  in the below path
    SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
    Goods receipt made after this change will be triggered the finance document.
    R,
    amala

  • Iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • My other mail boxes are not visible in mail after upgrading to Mountain Lion

    my other mail boxes are not visible in mail after upgrading to Mountain Lion

    In the mailbox panel move your cursor slowly down the right hand side . Should reveal show and hide.

  • SCCM 2012 R2 - Software metering Reports Parameters Value not appear to choice

    Hello Every Body
    I hope to get answer as soon as possible
    I have SCCM 2012 R2 & SQL Server 2012 SP1, my problem is ( all software metering Reports Parameters Values Not appear so I cannot select
    Note:-
    ( All parameters Available Value set to Get Values From a Query) 

    Has it been over 45 days since you created the active SWM rules? Do all (most) other SWM reports
    work?
    all other reporting in SWM which doesn't ask for month and year working
    only the problem in year & Month Parameters Values
    note:-
    these reports doesn't need a 45 days to work, alwasy when i install SCCM reports working only from the second day of installation

  • Photo library does not sync in iOS4 after upgrade in 3GS

    Hi all,
    Photo library does not sync in iOS4 after upgrade in 3GS.
    Anyone having such problems?

    Just did. Uncheck sync photo check box and sync. Then check sync photo check box and sync. Solved.

  • Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

    Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

    1st problem see http://kb.mozillazine.org/Firewalls
    2nd problem, to close Firefox properly use File > Exit
    :not with the [x] in upper right corner which close window
    :see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
    :if restarting use "Restartless Restart" extension as mentioned there.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • App updates not running on ipad2 after upgrade to iOS 5 - anybody know or a solution or have same problem?

    App updates not running on ipad2 after upgrade to iOS 5 - anybody know or a solution or have same problem?

    Operator error! The mute button was on.

Maybe you are looking for

  • Help with a new install of Adobe Acrobat

    I just had to install Adober Acrobat on a new laptop, and I need to point it to all the forms I was tracking on my old laptop.  How do I go about doing this?

  • Type casting in TestStand 2012

    Hello, I really do not understand why my TestStand 4.2.1 sequences are not working in 2012. Here is a simple example. SequenceCall: GetTime Sequence: GetTime Everything worked perfect till I installed new Version of TesStand. Now in GetTime Sequence

  • None of the exterior buttons are working...

    I recently replaced my screen and digitizer. Everything was still functioning well, even with the cracked screen. I opted to replace both screen and digitizer, since it appears to be quite the process to transfer the old digitizer to the new glass on

  • Quick way to disable seekbar in SMP?

    I'm using the 1.5.1 distribution of SMP, and I've made extensive changes to its classes for captioning capabilities. I'm now looking to disable the seekbar with a JavaScript-passed flashvar property, and I was hoping I could "fake it" by specifying a

  • Won't Work

    I have Adobe Elements 8.  After a computer repair it tells me to restart my computer before it can launch.  This produces no results except another message to restart my computer.  It then states to report Error:150:30 to Adobe support.  Tried to ema