ECU Calibration Tool Kit

I have just started using this tool kit.
We used the open.vi to load the a2l file and it reads the characteristic OK and DAQ list, but seemed to miss the part that set up the bus and SetKey DLL.
We set this vier Property.Set but it does not seem to work when we try to read a value from the ECU.
The as2 file does not give a path to the SetKeys DLL's so how does it no where they are.
Using Vector, it seem that some of the property values like station ID are being used as the Message ID with no data.
I am using a version 1 CAN card that could be the problem but I was told that it should work with the serial number on the card. No ask as it is in the PC.
I have a new card on order but I suspect I will still have the same problems.
This a2l file works with other third party software that use the same a2l file and DLL's.
So I have two problems.
Not reading the CAN interface setup part of the a2l file and not logging in the the ECU on the first call as expected as the message ID (send or receive)) is not being used.
Ta
Colin

Hi Ian
Thanks for your reply, here is the answer I got from NI
>>I have looked into your issue regarding communication over the CAN bus and I think I can explain why you are running into problems. As it is, the ECU module is only compatable with version 2 >>hardware. This is because the ECU module uses the NI-CAN Channel API whereas your card will only support the Frame API. One solution to your issue is to use a newer CAN card that is >>version 2. There is still a way to use the card you have, but this will require a little more effort. The solution is based on frame to channel conversion and is explained in the two KnowledgeBase's >>linked below. Don't worry about the fact it talks about cRio hardware as the card you have behaves the same.
I looked at the monitor program this morning and it seems that no messages are bring put on the bus.
The ECU tranmits about ten messages which are being picked up OK from the CAN monitor program.
I have a new CAN version 2 card on order but as they are not in stock I have asked them to loan me a USB version for now so that I can get thngs going.
I hope it works as I think there could be issues with USB, Hope not
Ta
Colin
I

Similar Messages

Velocity Displcement Calibration for Sound and Vibration Tool Kit

Hello Guys,
I have been working on sound and vibration tool kit recently.
I'm taking input from sound port of PC by signal generator and taking single and double Integration for velocity and displacement resp.
I want to check the correctness of the values for different amplitudes,and different frequencies of signal, velocity and displacement.
The RMS values for signal is calibrated as per signal generator, RMS value for the Velocity is correct for a limited frequency range
and the RMS value for the displacement is not at all calibrated for any of the frequency.
I will appreciate replies,

Hey guys,
The following vi is working
for the signal generated with in Labview but if the signal is taken
from mic port through signal generator.
then the velocity and displacement is not coming.
i'm attaching vi below kindly reply if someone get something
Attachments:
avd signal generator labview.vi ‏26 KB
avd mic port.vi ‏36 KB

Error while installing Migration Tool kit for SAP BPC7.0

Hi all,
We are implementing SAP Business Planning and Consolidation Migration Process to BPC 7.0.
We are trying to installin Migration Tool Kit. In this kit we are having two set up files - one for BPCMigrationClient and another for BPCMigrationServer.
When i am trying to install the BPCMigrationServer set up file it diaplays a screen which says - Enter the service type accounts.- it has the following items - 1. System Admin ID, 2. password, 3. Admin ID, 4. Admin Password, 5. User ID, 6. User Password.
1. System Admin ID already has the id ( through which i have logged on to the system). This option is non editable.
2. password: gives option to type in the password.
3, 4, 5, 6 options are disabled and are blank. we are not able to edit them or write anything in them.
After entering the password when clicked on next , it gives us message saying Invalid Admin ID (3). But the problem here is that the 3,4,5 and 6 options are disabled. We cannot write anything in them. We are not able to install the migration tool kit because of this.
Can anyone help us out in solving this issue.
Thanks,
Madhav

CAn you precise also what Migration tool are you using?
Migration from 5.1 to SAP BPC 7.0 NW?
In that case when you are speaking about the installation about what part are you speaking?
I think actually you are speaking about the migration tool from 4.2 to 7.0 Microsoft version .
In that case you can install the mIgration tool just with SAP BPC sys admin users and you have to input the password for that user. Sys admin user for BPC is usually the user used for installation of SAP BPC server.
Any way I suggest to follow the Migration tool training document and there you will find all the information necessary.
Regards
Sorin Radulescu

Report generation tool kit for vista

Where can we get report generation tool kit software(for vista Operating system) link .one of my friend has given me that software.He said he had got it from internet.can anyone give me the link so that I can download report generation toolkit software (for vista)
Thanks
kiranmayi

Hi Kiranmayi,
You can download Report generation toolkit from the following weblink:
https://lumen.ni.com/nicif/us/evaltlktrepgen/content.xhtml
or you can send a mail to [email protected] stating your full address and your requirement and we can send you evaluation DVD for free.
Thanx
Gaurav

Report generation tool kit not printing

I had the report generation tool kit version 1.01 for some time but never used it. I was comfortable with printing front panel vi 's.
But now I installed it on my computer with a windows 2000 and LabView 6.02 .
I created an application (executable) that will print (using the report
genartion tool kit). The application works fine in my development computer
(win 2000).
When I installed it on another computer with a win 2000, it prints as
expected
but when I try to exit I get a message from windows that the application is not responding (I have to go to task manager and terminate the application).
Both computers have word and Excell installed
I installed the application on a third computer (win 2000), but this com
puter does not have word or excell installed. The application does not print the
portion of the software that uses the report generation tool kit, but it can print the front panel of vi's (set to print an end of excution).
In all 3 computers, I have runtime engine 6.02 installed. My vi is simply
the example vi ""Sample test report.vi"", but customized to my application, printing standard report.
What is happening ?

Based on what you sent, the version of Excel and Windows that are being used is a non issue since none of the code makes any calls to either one. They all refer to the older version of the report generation VIs that use NI's proprietary report generator.
I can think of two explainations. First, you aren't using what you think you are. Second, NI retained the same VI names when they went to the Word/Excel version of the generator, and I am linked into the old version.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Problem with database tool kit, and MS Office Tool kit.

One of my programmer's who has the Office tool kit noticed this on Monday, and we haven't been able to find the problem yet.
We use the database connectivity reads and writes to a MS Access database. This program reads the data from a Symbol Scanner, and then inputs it into the database. He then has a query that to create a data table to pump into the MS Toolkit to build a MS World file (This is for a Bill of Lading).
What we found it that it works really well the first time, and on any further runs it will not update the database with any new data. It starts working again if we do a restart on the computer. It seems like something is not freeing up the database. He is freeing all the tables and closing the DB connection at each process, and everything else seems to be doing everything else right. I think the problem is that it goes into this MS Toolkit to make the table that goes on the Bill of Lading.
I did a modification that makes it read from an excel file on my desktop, and I found that it is doing the same thing. I deleted the report generator part of the program, and found that it will update the database properly. I have no clue.
here is the machine specs:
labview 8.6
Database connectivity toolkit 1.0.2
Report generator toolkit MS Office 1.1.3
MS Office 2007, the file is a Office 2003 format,

Given that the code still fails when talking to a excel file it sounds like this isn't really related to the database. Can you post a bit of your that shows the problem. Beyond that, be looking for things in the code that change between subsequent interations -- things like shift registers, globals, etc.
On the other hand, the fact that you have to restart the computer would tend to indicate that there is something going on with the MS Office side of things. To be clear: shutting down and restarting LV is NOT sufficient to clear the problem?
When the problem is occurring, if you shut down LV and open the Task Manager do you see (on the Processes tab) any MS Office components still running?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Excel MSGraph Axis Value w/ Report Gentration Tool kit help needed

Hello,
I am working on making all my Printed Data sheets dynamic so I don't need to have an Excel Template for each test I create. I have been able to make my own modifications to some of the Report Generation tool kit VIs to add little things I need or want changed, but I am stuck.
I currently have LabVIEW writing Charts in Excel, using the Insert Graph VIs from the tool kit but I want to be able to make the X Axis Values invisible but leave the Y values for this particular data sheet. I have looked through all my documentation but cannot find anything referring to setting that.
What is the correct ActiveX Method and/or Property that I need to incorporate to do this? I found that in Excel if I click on the Chart it is in the Chart Options Menu but I cannot find a way to control it through LabVIEW.
I am currently using 7.1.1 with Office 98 and the Report Generation Toolkit 1.1.0
Any ideas?
Thanks
Jeff
Jeff D.
OS: Win 7 Ultimate
LabVIEW Version: 2011,2010,2009 installed
Certified LabVIEW Architect

Hello,
LabVIEW should have access to everything that the excel ActiveX object publishes. One way to discover how to do it would be to record a macro in excel, where your recorded actions are on the x-axis as you desire. This way you will have a macro which you can run that will do this for you. Perhpas more importantly, you will then be able to look at the code for that macro you recorded, and make the equivalent calls in LabVIEW, which should basically expose which ActiveX calls on that object achieve the axis modification. In any event, to help you with this process, below are some useful links. Also, you will find other threads on this matter if you search the discussion forums.
Excel and LabVIEW Integration Tutorial:
http://zone.ni.com/devzone/conceptd.nsf/webmain/4d86c9752c658da78625689300730c10
Here are links to examples of using macros in Excel from LabVIEW:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DD2F56A4E034080020E74861&p_...
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3D9D856A4E034080020E74861&p_...
I hope this helps!
Best Regards,
JLS
Best,
JLS
Sixclear

Pareto Chart using Report Generation Tool kit

Hi,
Please help me to get clarification for the following:
I need to log data into MS Excel Report and generate Pareto Chart using LabVIEW for the Logged data.
I have Report Generation Tool kit. but i couldnt find the an option to generate Pareto chart with it.
Thanks,
Thirumala.

One way is to Create a Excel template in the predefined format with the rows/colums linked for the Chart.
Use this template with report generation toolkit to populate data in the predefined cells.Based on that the chart will be automatically updated.

Why can't I print to a Zebra 2746e using the report tool kit?

I have read on here how peoople have printed barcodes from LV by sending commands directly to a zebra printer. I am using LV8.2.1 on a windows xp computer. I am sending EPL2 messages to the printer using the report tool kit, but all I get is a couple of line feeds. If I send the commands from a command prompt by coping a test file to the printer port it prints fine. Any thoughts. I have attached my program.
Attachments:
zebra tester.vi ‏22 KB

I tried your code against my printer and it works as advertised. Can you print to other printers with it?
By the way, when assembling a string you should use the Format Into String function instead of a string concatenator with a bunch of inputs. It takes up less room and is easier to interpret when troubleshooting.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to add License Key For Integration Tool kit For SAP in Linux Server

Dear Experts,
We are Using BO XI R3.1 SP3 Enterprise Version ,Integration Tool Kit For SAP,Live Office.
The Server is Linux Server.
But while generating reports in Infoview it is giving error like ""_check that you are licensed to access SAP Data Source_".
So we came to know that license Key might Expire for Integraton Tool Kit For SAP in Bo Server.
So can you tell me how to add the license key For BO XI R3.1 SP3 Integration Tool Kit For SAP in Linux Server.
Thanks & Regards,
Venkat

On Unix / Linux you should be able to leverage the response from Raphael and change:
Location＝%BOBJDIR%/bobje/data/.bobj/registry/software/business objects/suite 11.5/sap/keycode/.registry
For more information verify the below link
[How do you update the SAP Integration Kit license?;
Regrads
Pardhu

How to read a passward protected excel file with the help of database connectivity tool kit

hi, i was reading an excel file with the help of database connectivity tool kit in labview 8.0
i made tabels in the excel file nand made odbc connection and specified the workbbok name.
now my problem is how to read the same file if i specife a pasword to that excel file ?

Hi,
Check out this thread about opening a password-protected Excel file using ActiveX. This should take care of it for you!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

How to create a table in mysql tool kit

Hello Sir/Madam,
H
How to create a table in mysql using the labview tool kit,,,I need the hyperlink to download this tool kit,
Thanks and regards
Jack
Jayavel

quick search
study and ask if further specific help needed

FF17.0.1, Java 7 U9 outdated message. Removed/re-installed.Picked up 10 & tool kit. OS Win7SP1 64 bit. FF keeps crashing. Plugin Disabled OK

FF 17 initial crash prior to update with Shockwave Flash 11.5.502.135 which RESOLVED.
Then Java 7 U9 began crashing. Bios updated, All Software/Hardware updated as well. Installed U10 from Oracle and still crashing. Got rid of U10 and went back to U9.
At least it's not crashing every 3-5 minutes as U9 did before. Do not want to stay in safe mode forever. HELP....I'm missing something? Where I'm at now with Add-ons Manager stating U9 outdated....plus many other Plugins are listed as "unknown":
Java(TM) Platform SE 7 U9
Next Generation Java Plug-in 10.9.2 for Mozilla browsers Outdated Version Update
Plugin Icon
Java Deployment Toolkit 7.0.90.5
NPRuntime Script Plug-in Library for Java(TM) Deploy Outdated Version Update
Since this began happening, the following plugins became unknown and suggested "research".
Microsoft Office 2010
The plug-in allows you to open and edit files using Microsoft Office applications Unknown plugin Research
Plugin Icon
Windows Live Photo Gallery
NPWLPG Unknown plugin Research
Plugin Icon
Simple Pass
Website Logon Plugin Unknown plugin Research
Plugin Icon
Intel® Identity Protection Technology
Intel web components updater - Installs and updates the Intel web components Unknown plugin Research
Plugin Icon
Google Update
Google Update Unknown plugin

Resolved.....Java is green on Add-ons Manager. I pulled up the Java Control Panel and clicked on UP-Date. Damn if it didn't do it beautiful and now tool kit is gone and this is what the plugin profile shows with only ONE ENTRY NOW:
Java(TM) Platform SE 7 U10
Next Generation Java Plug-in 10.10.2 for Mozilla browsers 1.7.0.10 Up to Date.
What I learned --- Do not use update from Oracle, regardless if U9 completely removed.
Let the "Java Control Panel" on your computer do the work.
Can't wait to see if my "crash days" are over!
I'm not out of the woods yet. Profile page still shows GREY---Plugins UNKNOWN and RESEARCH for the following:
MS Office, Windows Live Photo Gallery, Simple Pass, Intel ID Protection Tech., and Google Update
'''Does anyone know why the above plugins are listed as "unknown" on the Add-ons Manager?'''

Issue in Data Admin Tool Kit

Hi,
I am modifying the Signature email body under workflow in Cutom Translations in Data Admin Tool Kit. When I am trying to write in new line, I am not able to write.
I used HTML tags like \n but then also it is not writing in to new line.It is coming as below.
Action needed at the following status\nINPUTand REVIEW\n Data Owner can enter content.Refer to the Ownership Grid on the Helix SharePoint for field ownership and instructions.\nData Reviewers can review and sign off to approve the spec.\n\nPLANT TRIAL\nData Owner can Modify, Update, Review owned content.\nData Reviewers can review and sign off to approve.
Please help and let me know how to write the text into new line in Override translations under Custom translations .

What is the sql you are using? Is this Sql Server or Oracle?
You can try a double back slash like this
Action needed at the following status\\nINPUTand REVIEW\\n Data Owner can enter content.Refer to the Ownership Grid on the Helix SharePoint for field ownership and instructions.\\nData Reviewers can review and sign off to approve the spec.\\n\\nPLANT TRIAL\\nData Owner can Modify, Update, Review owned content.\\nData Reviewers can review and sign off to approve.
If it is sql server Ive used the following in the past with SQL Server Studio, and just included the new line/Carriage return in the editor and it worked:
INSERT INTO TysonTranslationItemValues (pkid, fkTranslationItem, langValue, langID) SELECT '2167d3fa954c-2ab3-4e7e-bb06-5bda86eba661', '2166b8a82f69-b243-4d2b-a380-ffdd542e01d6', N'Attention: @PERSONTOSIGNOFF
Your ''@FUNCAREA'' signature has been requested for the activity ''@TITLE.'' (on project ''@PROJECT''). Please review the document and use the ''Workflow'' signpost icon in the upper toolbar to submit your approval (or return with comments) once you have reviewed the supporting documents:
@URL', 0 FROM DUAL;
Hope that helps.
--Trey

Calibration tool for 24" LED Display

Greetings, I'm currently using the 24" display with my MacBook Pro and am looking for calibration tool recommendations. I went to the Apple store and they sold me the Huey Pro from Pantone. I haven't opened it yet as I saw it had mixed reviews. It also says it's for CRT's and LCD's. Has anyone tried it on the 24" LED monitor? Successes/failures appreciated.
Thanks.

Brightness and Contrast settings are both dictated by ambient light in the room. There is no set point, and so day and night modes are used for this reason. For this properly setup, you need to use a test pattern which shows the greyscale detail and increments from black to white. Typically "pluge" or blinking patterns are used as well.
After setting those up, you DO NOT want ambient light present when using your meter. Meter's don't have peripheral vision like we do to compensate for room lighting tones... therefore, either work in the dark, or drape something over the sensor & screen.
Here is a free download to get some patterns:
http://spectracal.com/download_HTPC.html
Good luck.

ECU Calibration Tool Kit

Similar Messages

Maybe you are looking for