ECXpert3.5- How to setup HTTP-SSL for xml protocol

Hi,
We are using ECXpert3.5 on Solaris box. One of our Trading Partner want to communicate through HTTP-SSL and we are doing XML/EDI mapping. Could you guide us what steps we need to take care to implement this.
How the external system will talk to ECXpert for transferring files.(We need the syntax for the URL). Could you suggest how to setup the HTTP SSL for XML protocol to receive xml files from remote system.
Thanks in advance for your help!
Regards,
Ravi.

Similar Messages

How to setup HTTP client for HTTP to File scenario

Hey guys
i have a scenario wherein one of our clients is sending invoices(as XML message) over HTTP(client is outside our landscape) and i have to to send this invoice to a File system from where it will be picked up by an ABAP code(picking of the file has to be done by ABAper so i m not concerned with that)
the way i m starting off this project is that
i will create a sender and receiver data type,message type and Message interface,Message mapping is 1-1 so its kinda simple and then Interface mapping.
in configuration i wont be creating and sender communication channel and sender Agreement,i need receiver communication channel,receiver determination and interface determination.
does my design and configuration looks good to you guys?
also i waz goin through some threads and it says that i need to setup HTTP client for this scenario and then specify a URL in a specific format.
where will i setup the HTTP client and where will i specify the URL?
thanx
ahmad

Ahmad,
><i>does my design and configuration looks good to you guys?</i>
Is correct.
><i>where will i setup the HTTP client and where will i specify the URL?</i>
Take a look at this thread and check the HTTP Client code.
Copy the code and save it as a HTML file and you have the HTTP Cliet ready. GIve the details of your server, sender service, interface etc and trigger the call to XI.
In a real time scenario, you will need to use the URL used in the HTTP Client code from your WebApplication to trigger the call to XI.
/message/266750#266750 [original link is broken]
Regards
Bhavesh

How to setup the RV120W for quickvpn

Hello,
The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
Thanks for any help

User Guides for thee rv120W are here:
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
and theres some more stuff over on my site:
http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
Below are the Windows 8.1 client IP Configuration
C:\Windows\system32>ipconfig
Windows IP Configuration
Wireless LAN adapter Local Area Connection* 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wi-Fi:
   Connection-specific DNS Suffix . : home
   Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
   IPv4 Address. . . . . . . . . . . : 192.168.1.5
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
Tunnel adapter isatap.home:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
   Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
   Default Gateway . . . . . . . . . :
Tunnel adapter iphttpsinterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
   Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
   Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
   Default Gateway . . . . . . . . . :
Below are the IPConfiguration details for Direct Access server
C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
   Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
   IPv4 Address. . . . . . . . . . . : 10.192.1.25
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
   Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
   Default Gateway . . . . . . . . . :
Tunnel adapter 6TO4 Adapter:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter IPHTTPSInterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
   Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
   Default Gateway . . . . . . . . . :
ipconfig exited on MURA01 with error code 0.
Below are the IPCONFIG Details for SCCM Server:
C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
   IPv4 Address. . . . . . . . . . . : 10.192.1.30
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
ipconfig exited on sccm01 with error code 0.
What will be the IPV6 values to configure boundary?

Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to setup Data guard for SAP database?

Can someone please tell me how to setup data guard for SAP databases?
Thanks,
Abhi

Hi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay

How Do I Configure SSL for RAC Installation.

Experts,
Requesting your inputs on configuring SSL for my RAC environment.
- Oracle DB version is 11.2.0.2
- RAC is with two nodes.
- Two nodes are : rac1.oracle.com and rac2.oracle.com
- RAC setup has SCAN feature configured. SCAN FQDN : racscan.oracle.com
- All clients talk to RAC DB using SCAN feature as shown below.
client applications -> racscan.oracle.com ---> rac1.oracle.com
---> rac2.oracle.com
- tnsnames.ora file on both RAC instances has hostname as "racscan.oracle.com" instead of their individual phyiscal host names.
How do I configure SSL for RAC:
1. Do I need to generate certificate request for individual hostnames or only for SCAN hostname ?.
2. If I generate a certificate based on SCAN hostname, how does SSL work since SCAN hostname is not a phyiscal host name ?
3. What is recommended strategy for configuring SSL for RAC environment ?
Thanks

The documentation on the creation of Oracle Wallets is not specific to RAC, and the RAC SCAN instructions for TCPS are very vague on the specific requirements for the certificates required in the wallets for proper operation. I too am struggling to get it to work. Does anyone have a more technical guide to the specific configuration of the certificates needed and what specific configuration file changes need to be made?
Also, the self signed documentation is getting REALLY old. Oracle, please stop giving instructions that demonstrate irresponsibility and show the proper method of certificate requesting and importing to wallets.
Edited by: user11338513 on Mar 21, 2012 2:23 PM

SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?

Hello IDM-experts,
where can my customer find information about
SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
Customer situation description:
The situation is that we are using SAP IDM 7.2. We are using a functionality to allow our users to access a webpage from where they can gain
SSO access to the Abap systems via the SAPGui. See screenshot as an example.
Now what we want is to access the CRM and GRC WebUI also with the same SSO possibility. We cannot find any guide/best practice on how to do
this or if it is possible via SAP IDM 7.2.
You can see a weblink in the first screenshot but it does not work. It will ask you for a username and password, see second screenshot.
Kind regards,
Daniela

Do you know how the SAP GUI SSO is setup ? Is it using SNC/Kerberos ?
If it is (I suspect it is), then you will need to use similar method of authentication for the ICF Services. These cannot use SNC since they are accessed via browser, but what you want is possible.
Thanks
Tim

How to setup my airport for music streaming

Hi all
I would like to use my iPhone and or iPad to stream music from Pandora and Spotify to my 5.1 (Wired) Speakers.
This question is similiar to this thread https://discussions.apple.com/thread/4153687 however i wanted some clarity and thought best to start a new discussion before pulling my hair out doing this the wrong way.
I have an unused Airport Express basestation (A1408) My current home setup is as follows:
Modem Router: (Netgear DGND3700) N600 Wireless ADSL2+ Dual band Gigabit
Home Theatre Computer: Windows 7 (Cat6 LAN Ethernet connection) NO LAN port
AV Reciever: (Onkyo TX-SR309)
5.1 Speakers: Wired connection to AV Receiver (NOT Airplay capable)
Laptop: Windows 7 (Cat6 LAN Ethernet connection)
My question is how to setup the airport, i understand it can be used to enable airplay streaming of music over the existing WiFi network, as these music streaming apps download and play music concurrently i would not want to have to switch between to two seperate WiFi networks. Should i plug the airport into the HTPC? I would need to purchase a LAN Splitter as the only LAN socket is already taken up with my cat6 connection. OR would i plug it directly into the modem/router? This second option is prefereable.
I have attached an image of my setup below. Any advice would be great, Regards Steve
[URL=http://s1293.photobucket.com/user/steve7677/media/homesetup_zps63eaf61c.jpg.html][IMG]http://i1293.photobucket.com/albums/b599/steve7677/homesetup_zps63eaf61c.jpg[/IMG][/URL]

Still slightly confused, with the link you provided i chose scenario 2. All the other secanrios instructed i connect the airport express to my home stereo or powered speakers. As i dont have an aiport express only an airport extreme there is no audio jack and cannot connect it to the stereo/speakers.
option 2: Connecting to an existing Wi-Fi network as part of a roaming network
Ensure that the AirPort base station Ethernet cables are connected as above
I have done this and conected it via ethernet cat6 to the modem/router
Launch AirPort Utility 6.1. The Assistant will automatically configure the Roaming network
Im using windows 7 and cannot find this version of aiport utility, only 5.6.1 - The message comes up: Aiport utility was unable to find any airport wireless device. I am running this utility on my win7 HTPC (which is connected to my modem/router via cat6 LAN) The airport light is blinkng amber.
would you reccommend a hard reset of the airport? or can you provide a link for AirPort Utility 6.1.?
Regards

HTTPS (SSL) for an internal application: benefits? costs?

This is a traditional SAP R/3 customer, recently upgraded to ECC (ECC 6.0, Basis 7.0). We are still using the ABAP stack only, with no plans of installing the Java stack, installing SAP EP portal, .
A small "Web Dynpro for ABAP" (WDA) application has been developed, as an exploration into the world of WDA. It is intended for occasional users - users who rarely use the SAP system and who do not have the SAP GUI for Windows installed on their PC. It is purely an internal service (intranet) - not customer-facing, only available on the internal network.
It is currently using plain HTTP, but the question has been raised whether we should use HTTPS (in other words, set up for SSL).
What would be gained by doing this and how much would it cost?
If I understand correctly, it would enable server authentication. You would be certain that it is the genuine SAP server that is asking for your username and password, not some phishing scheme - not really a big issue on the internal network. (We could buy a server certificate from the SAP TC Trustcenter CA - 260 EUR excl VAT.)
It would also enable client authentication. If I understand correctly, this would remove the need for username/password log-in, but it would require the creation of certificates for each one of those users, to be distributed to each one of them and installed in their browser. No small undertaking! This sounds like the scheme used for the "SAP Passport" in the SAP Service MarketPlace.

First you can turn on HTTPS without the use of client certificates. These are two different things. You can have HTTPS and still use basic authentication or forms based authentication. You could do certificates as well (which then would require HTTPS), but certificates are not a requirement if you just want to do HTTPS.
The main benefit of HTTPS is the encryption of the data as it travels through your network. With plain HTTP, anyone with a network sniffer could read any of the data across the network (including the user's password when they login). The question probably comes back to how much you trust the security of your internal network. But also you might consider what a rouge employee could do with some basic network knowledge - mainly gaining other users passwords.
That is also why SAP offers a hybrid approach called switch to HTTPS for logon. This is a setting in the logon configuration in the service nodes in transaction SICF. This way you switch into HTTPS just for the logon screen. The password is sent encrypted. Then for the application data itself, you switch back into HTTP. This way you don't pay the performance cost of encrypting all the data for every HTTP request/response.

How to setup separate rington for each contacts?

Will someone point me to a tutorial or show me how to setup separate ring-tone for each contacts?

http://support.apple.com/kb/HT1413
Assign a ringtone to a contact
From Phone, tap Contacts and choose a contact. Tap Ringtone and choose a ringtone. When that person calls, you hear that ringtone.

How to setup a KDC for Kerberos Authentication

Hi,
I am new to Kerberos. I am trying to execute the sample codes on Sun site but i am not understanding how to setup a KDC.
Please help me.
Regards.

Hi Alexander,
create the proxyauth.txt file in the roor directory of you MI Client installation and add the following paramters to the text file:
MobileEngine.Sync.Proxyuser= Username for Proxyserver
MobileEngine.Sync.Proxypw=Password for Proxyserver
Regards
Tahran

How to maintain HTTP Destinations for Adaptive WebService in Netweaver 7.1

hi ,
i am working with adaptive webservices. i hv created HTTP Destinations for Webservices on server. In Netweaver 04s i used to write code as follows
wdContext.currentNodeTest.modelObject()._setHTTPDestinationName("DESTINATION_NAME");
just b4 executing modelObject.
But in Netweaver 7.1 , no method _setHTTPDestinationName available for wdContext.currentNodeTest.modelObject() . I want to change host for wsdl , as my production and development servers are different. How can i use HTTP Destinations in Netweaver 7.1?

Kavita,
Are you creating adaptive webservice model, if so then you just need to import webservice model once in your code and when you deploy your application you must define two logical destinations in visual admin.
DEFAULT_WS_METADATA_DEST
DEFAULT_WS_EXECUTION_DEST
How to define logical destinations, check out following link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7
if you are running application in your development or production server just define these destinations and your application will run smoothly.
Regards,
Jawed Ali

How to setup Anonymous TP for Immediate ACK for HL7

All,
Can someone give me steps to setup Anonymous TP for Immediate ACK for HL7?
Dipal

Ramesh,
I follow the concept, I am not quite sure about the steps. I am outlining the steps as per my understanding correct me If i am wrong.
- update existing TP "A" for ex to remove business action for ack.
- update exiting TP "A" for ex to disable FA
- Create Anonymous TP with business action Generic Ack and validation off.
- Set oracle.tip.adapter.b2b.defaultTP = Anonymous in tip.properties
oracle.tip.adapter.b2b.hl7.singleDC=true
oracle.tip.adapter.b2b.hl7.genericMessageType=ACK
oracle.tip.adapter.b2b.hl7.immediateAck=default
Would this be it? or am I missing any steps?
I am still not quite sure how would b2b know to respond to incoming message from TP "A" and send the MSH.10 value in ACK and datetime format we need.
Please let me know.
Dipal

How to implement HTTP Streaming for Flash Player 10.1 ?

Hi there,
I have been developing a streaming video player application in Flash Builder 4, and have been really excited about the HTTP Streaming functionality now available in Flash Player 10.1.
Unfortunately, there seems to be an extreme dearth of materials on how to actually implement HTTP Streaming both server side and client side. Does anyone have a straightforward tutorial/example of how to implement HTTP Streaming from start to finish, or do any of the Adobe Developers plan on releasing documentation for this?
I've looked through the BETA Actionscript 3.0 API Documentation and noticed the new NetStream.appendBytes() and NetStream.appendBytesAction(), which I suspect are involved in HTTP streaming. I also saw a sketchy introduction from Ryan Shin on the Open Source Media Framework (OSMF) website (https://admin.na3.acrobat.com/_a204547676/p96986524?launcher=false&fcsContent=tr ue&pbMode=normal), but it seems to be lacking in details regarding how to actual implement a "file packager" on the server or how to open an HTTP Stream on the client side.
Any help would be much appreciated.
Thanks!
Ho Tuan

It is unlikely that you will get an answer here in the Flash Player (release version) forum. Better try in the appropriate Flash, Actionscript, or FP 10.1 beta forum http://forums.adobe.com/community/labs/flashplayer10/flashplayer10.

Can anyone tell how to setup audit trials for opm

HI,
how to setup audit trials function available in sys admin for OPM modules.
can any one provide steps to hav audit trials.

Does the jaxp direcory have a jaxp.jar?
Add jaxp.jar to Classpath.

ECXpert3.5- How to setup HTTP-SSL for xml protocol

Similar Messages

Maybe you are looking for