ED NOT rounding

Dear Friends
ED is not rounding off in incoming Excise Invoice.
The settings in "Company code" are maintained for rounding.
where else to check?
Rgds
Sumanth.G

Hi
What do you mean by incoming invoice??
Check in LG GENERAL--TAX ON GOODS MVMT--maintain company code settings
Try by assigning the routine 17 in calculation type for your ED condition type in your pricing procedure.
regards
Prashanth
Edited by: Prashanth@SD on Jan 20, 2011 5:26 PM

Similar Messages

  • ITunes 10.4 window corners not rounded on Windows 7 (Aero)

    The window corners on the Windows version of iTunes 10, and earlier on version 9, are not rounded when running in Aero mode.
    There was feedback here and there, and no one at Apple seems to care. How dare you to just stand there and stare?

    Several major versions and the problem still exists. Did you not test on Win7 or something?
    This is pretty stupid. Sadly I will probably revert to the win7 basic theme it bothers me so much.
    Please Fix!!!!

  • Can Flash create dashed line with blunt not rounded dashes ?

    Hi,
    using Flash8
    I can select line tool and dashed line in properties and draw a dashed line and get a line of sausages. How do I get a line of dashes without rounded ends to each dash ?
    Line option has end caps option with None (gives straight or blunt tip to line, round gives rounded tip .
    Draw a line with None and its got blunt ends, select it and choose dashed line option and it gets round ends to the dashes, the end cap option is greyed out !
    Are dashed lines with blunt dashes now possible again with CS4, a forum poster also found that CS3 no longer gave blunt dashes ?
    Why do I ask:-
    I am trying to bring a map into Flash8 from Illustrator (Illus version 10 as it allows blunt tip lines to remain blunt it was said on the forum)... which has blunt ends to roads and has blunt type dashed lines. The roads remain blunt..GOOD !..but the dashed lines become what looks like a solid line. BAD !
    I do a right click - break apart,  then double click one of those now solid lines that should be dashed, and I am able to select a portion of the line, it is no longer a continual line as drawn in Illustrator. Properties shows it as solid line. Flash8 obviously having a problem with supporting Illustrator 10 dashed line then !
    Select dashed in properties box and I get a portion of the line as sausage dashes, but working my way along the line doing each bit sees a far from correct dashed line result as sausages dont start stop evenly as each line is a separate entity and ignores the previous line.
    Looks like I shall have to try and draw the line as one long line again in flash but unless I can give it blunt dashes when done, there is no point even trying that method, hence my question.
    Would the latest Illustrator and Flash versions (CS4) allow blunt type dashed lines to appear in Flash ?
    This is crucial for bringing maps into Flash.
    Envirographics

    I noticed one problem with my solution.
    If you look, very carefully, at the end of the stream, it's flat. Not rounded like it should be. After a bit of trial and error, I tried a different brush:
    Note that, in addition to the rounded rectangle (done with the new corner controls in the latest version of Illustrator CC that just came out) and the three circles, there is also a rectangle, with no stroke and no fill, to provide a space at the end of the three dots. Here is the result:

  • Windows bottom corner left and right edges are not rounded

    Hello,
    I have an issue with my macbook pro retina 13inch.
    The left and right bottom corner are not rounded like they are supposed to be, I can see the pixel.
    They do not always appear so it is not a display problem (dead pixel) but a software problem.
    For example with full screen mode in safari sometimes they appear sometiems they do not.
    A clean install of my mac did not solve the issues.
    Here is a picture to explain the issues :

    Hello Dominic,
    It is not normal.
    Sometimes my windows are rounded the way yours are and sometimes they are not.
    Click on the picture of my post to zoom and see the problem.
    Here is another screenshot, this time with a windows which has no issues :

  • [svn] 1183: compiler: Finished off generics warnings in graph, they' re bulletproof now (as long as they're not rounds of depleted uranium).

    Revision: 1183
    Author: [email protected]
    Date: 2008-04-10 14:10:12 -0700 (Thu, 10 Apr 2008)
    Log Message:
    compiler: Finished off generics warnings in graph, they're bulletproof now (as long as they're not rounds of depleted uranium).
    * Improved the generics in other places and took advantage of enhanced for loops in some nasty iterators
    Bugs: n/a
    QA: Yes, I'm done with the cleanup so it's a good time to run the suite and see what damage I have done!
    Doc: No
    Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/Assets.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/graph/Algorithms.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/graph/DependencyGraph.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/graph/Edge.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/graph/Graph.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/graph/Vertex.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/graph/Visitor.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/ConsoleApplication.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/linker/SimpleMovie.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/CompcPreLink.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/Mxmlc.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Project.java

    Did you read the comments, either on the AUR page or in the output that you posted? They explain it.

  • Rounding Off is not rounding the net value in Debit/Credit Memo

    Dear Experts,
    Please guide me in the below mentioned situation:
    I have used  "Rounding Off" i.e. DIFF condition type in the pricing procedure and it is giving the desired result. But when I am creating Credit/Debit Memo, the Rounding Off is taking that value which it has taken to round the total value in creating billing document. As a result in many cases, while creating Credit/Debit Memo the Rounding Off is not rounding the net value of the document.
    Please guide me how to solve this problem.
    With regards,
    Jhelum Roy.

    Thank you sir for this information. this is really helpful.
    Further
    My requirement is to capture this rounding value also and show it in the print and carry to GL account. So that client can generate a report on this extra revenue by rounding values.
    I ahve only condition type in my rpicing procedure as per my requirement. details maintained are below
    condition typr: ZPPC
    Mandatory:  X
    print : X
    requirement : 2(Item with pricing)
    cal type: 17 (Rounding as perT001R)
    Acc Key: ERL
    in the table T001R table the calue maintained for Co.Code is+currency is 5(so that system is alsays round up 5)
    tha t means if the value is 26.03 then it will become 26.05. This is working fine. but how to capture this 0.02 seperatly and carry to gl accouns
    Thanks you in advance
    Kiran Musuku

  • Compensation Workbench - Amount not rounded when uploaded from spreadsheet

    Hi,
    In CWB Allocate Merit and Lump Sum page, the Target Amount field has been defined to rounding code of 'Round to Nearest One'.
    All amount with decimal value entered on the worksheet are rounded to the nearest one.
    However, when downloaded to spreadsheet, Target Amount field can be entered with decimal value. And when uploaded, the decimal value is captured on the worksheet. Amount was not rounded. Only when change is triggered on the amount, the rounding works.
    Please help.
    Thanks.

    Hi,
    I am fairly new to CWB but from what I have seen, you can write formulas in the "Default Values" fields in the basic layout section from the desktop integrators. Below is a formula that is written that rounds the value. It is set to constant so I am not sure if you can get it to work on an entry field. but you may know how.
    =IF(ISERROR(HANDLE_ROW_P_PL_XCHG_RATE),IF(OR(RC[-1]="",OR(RC[+1] =0,RC[+1] ="")),"",ROUND(RC[-1]/RC[+1]*100,2)),IF(OR(RC[-3]="",OR(RC[+1] =0,RC[+1] ="")),"",ROUND(RC[-3]/RC[+1]*100,2)))

  • Quantity from PR should not rounded off in PO

    Hi Friends,
                                    If suppose PR quantity is 1.65 SFT. While adopting data from PR, system is showing 1SFT in PO.But I want it to be 1.65 ASFT only. So please suggest, what customizations I have to do?...
    Regards,
    Edited by: k prasanna on Mar 5, 2009 4:19 AM

    Hi,
                        I have maintained EX as lotsize for PD items and HB as lotsize for VB items.        other than this I have not maintained any rounding off in MRP Screens. Please suggest, what else fields I have to check?
    Regards,..
    Edited by: k prasanna on Mar 17, 2009 6:42 PM

  • Sales order item quantity not rounded and allowing decimals with UoM EA

    Hi gentlemens,
    I noticed something strange in our SAP ERP system.
    When we enter a material in a new sales order item, we are allowed to enter quantity 1,5 EA (1 and half Each).
    But when I check the config of the UoM EA in table T006, the number of decimals (field DECAN) is 0 and the decimal place for rounding (field ANDEC) is also 0.
    As far as I remember from other other SAP system, there should be an error message when entering the quantity 1,5 EA saying that decimals are not allowed for this unit of measure.
    Can someone help and tell me wich error message or which rounding program should normally be active when entering decimals with uom EA ?
    Thanks and regards,
    BDT

    Hi Mani,
    Thanks for the thread reference. I found the related OSS notes yesterday evening but this was for procurement.
    Here the question I have is more for a sales item.
    The strange case we are facing is:
    In a sales order, we can enter a particular material as a standalone item with a quantity of 1.5 EA without any problem.
    But if we create the same new item as a sub-item of a previous one (filling UEPOS), with qty 1,5 EA, then a rounding is triggered by the system based on the T006 config.
    I am wondering if this is a problem with the SAP standard program or if we did anything wrong in the past in our system?
    Best regards,
    BDT

  • Forecasting Spreading NOT rounding the Qty(We DONT want DECIMALS) in Foreca

    Hi ,
    I want oracle will "round" the forcast Qty.Is there any Profile Option? Or setup ?
    Please help me
    Lokesh

    You can try to use the round order quantities item attribute.
    The ASCP UG says :
    For items under rounding control, the planning engine rounds a spread forecast quantity up and applies its cumulative remainder to the next bucket. It uses the item-organization item attribute.
    However, ASCP dev did say recently that they do not support rounding during spreading of forecast.
    Inline forecasting engine rounds the forecast quantities based on item attribute. The issue here is that forecast spreading is done after inline forecasting has completed and rounding control attribute is not respected during forecast spreading.
    It's a bit contradictory to what development says and as to what is in the UG. They will probably say is a Doc bug.
    Best regards
    Geert

  • Possible to make line corner not jagged, but not round?

    If you look at the attached image, you can the upper line is very jagged.  Is it possible to retain the object's shape but make that point, less pointy?

    There are three black partial segments in your screenshot. I will refer to them as the Upper Segment, Middle Segment, and Lower Segment.
    The unwanted outboard point is due to the mitering of the accute corner formed by the Upper Segment and Middle Segment, which are part of the same path. You can correct this by instead making the Upper Segment and Lower Segment parts of a single path, and let the Middle Segment be a separate path.
    Depending on the rest of the paths, which are beyond view, this may or may not require treating the Strokes as separte paths from the Fillls.
    JET

  • Double buffering circle not round anymore

    I am making an applet where some circles are painted to the screen. When not using the double buffering scenario, the shapes appear correctly.
    The problem is when i use the double-buffering technique, the circles are still there, but they look like very ugly. I would call that some "squarcles".
    What is the bug here and how to get some decent double buffering with thoses circles?

    Ok, i had some problem with the running thread when closing the applet viewer, but now this situation is corrected by setting the animation thread to null before calling stop().
    Maybe explanation of the problem is not clear, so i made two versions of the same applet with only 2 lines of code different so that there is one applet that is not double buffered.
    You can check these by yourself at this place:
    Double buffered circles: http://www.geocities.com/xeneve/cooltrail/ demo_cooltrail.htm
    No double buffer:
    http://www.geocities.com/xeneve/cooltrail/demo_cooltrail_ndb.htm
    This is just annoying to get this result. I realise that maybe not many peoples are coding applets so i guess there is few people that may have a workaround for this.

  • Double buffering circle not round

    I am making an applet where some circles are painted to the screen. When not using the double buffering scenario, the shapes appear correctly.
    The problem is when i use the double-buffering technique, the circles are still there, but they look like very ugly. I would call that some "squarcles".
    What is the bug here and how to get some decent double buffering with thoses circles?

    Here is the code so far i have that is used for painting on the screen:
    // Declaration
    private BufferedImage ecran;
    private Graphics2D buffer_ecran;
    // Instantiation
    this.ecran = new BufferedImage(getSize().width, getSize().height, BufferedImage.TYPE_INT_ARGB);
    this.buffer_ecran = ecran.createGraphics();
    // In paint() method
    Graphics be = buffer_ecran;
      // Clean the surface
    be.setColor(Color.WHITE);
    be.fillRect(0, 0, getSize().width, getSize().height);
      // Draw the circles
    be.setColor(Color.RED);
    be.drawOval(x, y, ra, rb);
      // Output the buffer to the screen
    g.drawImage(ecran, 0, 0, this);I was previously using Image and changed to BufferedImage with the hope it would resolve the situation. I can't tell a significant change in image display.

  • Count Age - Datediff (not rounding up age)

    How would you write the formula to calculate the age so that it doesn't round up?
    DateDiff ("yyyy",{member_current_demographics.member_birthdate},{history_member_svc.date_of_service})
    Ex:
    Date of birth       Date of Service         Age
    07/5/91               7/4/09                        ???
    My age calculation should be 17, and it isn't.  It' s coming up at 18. 
    How can I write the formula different?  
    Please help!!
    Edited by: TrangN on Aug 21, 2009 8:28 PM

    if cstr({member_current_demographics.member_birthdate}, "MMdd") > cstr(history_member_svc.date_of_service, "MMdd") then
      formula = datepart("yyyy", history_member_svc.date_of_service) _
                  - datepart("yyyy", {member_current_demographics.member_birthdate}) - 1
    else
      formula = datepart("yyyy", history_member_svc.date_of_service) _
                  - datepart("yyyy", {member_current_demographics.member_birthdate})
    end if
    HTH,
    Carl

  • Audio from Sony EX1r Camera will not round trip from Audition

    With Premier CC15 the audio from my Sony EX1R Video Camera comes back from Audition after the edit  just as a loud buzz.  It works fine in Premier 6 and also CC.  My Panasonic camera Audio, as well as all others work fine. 
    Can someone help?

    Giving up? Four product releases in nine months. That's a pretty aggressive development schedule for a new product.
    Motion is a separate development track and always has been. Roundtripping to Motion was not available in its first releases. Apple has taken a new approach with publishing and rigging, which has great benefits. It basically meant that the entire effects, transitions, generators, and titling architecture didn't have to be rebuilt in FCP and that the two applications can work together. There are a lot of things this allows. For instance, if you want to add effects from Motion to clips in FCP, roundtripping is quite unnecessary; simply publish the effect with the parameters you need and apply the effect inside FCP.
    Roundtripping is really useful for a lot of things and will probably be implemented. In the interim third party soluations using XML hooks are available.

Maybe you are looking for