Edge and Images

All-
I have a few images I'm using as backgrounds in Edge. If I assign the hide() function does the computer still process it the image behind the scenes? I'm trying to maximize the usability of my site so I'd like the graphics to be processed efficiently. I was thinking that I might have to delete the image upon mouse click and then create it again on another mouse event. Another idea was to embed the image in another html page and pull it in dynamically
need help choosing the proper course
thx,
`Z

Hi there,
When you use jQuery's hide() method, then you're essentially setting the display property to off, which actually results in the element no longer being displayed in the DOM. The hide() method is handy to use if you want to reload the element later using show(), or if you just want it not rendered in the browser any more.
If you truly want to nuke the element from the page, then use the remove() method instead.
More info here:
http://api.jquery.com/hide/
http://api.jquery.com/remove/
hth,
Joe

Similar Messages

Edge and image sequences

Can you set a edge element (div) on the stage to play a image sequence? for example a frame animation rendered from AE or other source If so how?
If not can you play a video you host on your own site and can it be an element (layer) that you can animate, group, or mask like any other graphic ?
Thanks
Joel H

Mylenium is correct.
This might help you to understand better:
https://www.video2brain.com/en/lessons/frame-rates

EDGE and HTML dynamic text in a "box" with scroll bar

I'm new to EDGE, a win7pro master collection cs5.5 suite owner. I'm mainly in the Film/Video post production field (mostly AE, PPro, Pshop, IA) but have been branching into web design the last couple of years. I use Dreamweaver, Fireworks, Flash. While I'm a expert user with all the Film/video apps, I would say I only have intermediate ability with the web apps. While I understand a lot of programing logic bulding blocks I'm not a coder.
So since we're told "flash is dead", my interest in Edge is to try to do some of the things that I can currently do in flash in EDGE. I was excited when Edge first came out but lost interest when it became obvious that Adobe was not going to offer Edge and Muse to "suite owners" but only in their force feeding of the "Cloud". Better known as the "golden goose" for adobe stockholders and a never ending perpetual hole in the pocket for users. Anyway....
I spent the last couple of days doing some of the tuts and messing with the UI. It's matured a lot since I was here last.
I've been working on a flash site for a sports team where one of the pages is a player profile page where college recuriters and other interested parties can view recuriting relavent info/stats about players. This is how it works. While on the "Team" page a users clicks on a button labled "Player Profiles" . (Animation) A "page" flies in and unfurls from the upper right corner (3d page flips effect created in AE played by flash as a frame SEQ). Once it lands filling most of the center of the screen there is a bright flash. As the brightness fades we see the "page" is a bordered box with a BG image of a ball field(End). (Animation) from behind the border in fly small pictures (player head shots with name and jersey number). They stream in and form a circle like a wagon train and the team logo zooms up from infinity to the center of the circle(End). As the user mouses over a player's pic it zooms up a little and gets brighter (like mouseover image nav thumbs for a image slider). If the user clicks on a player's head shot it flips over and scales up to become a text box with a scrollbar. The content of the box is a mix of images, static and dynamic text fields populated from data in an "player info data base" XML file, and some hyperlinks. It's all kept updated dynamicaly with current stats, info and images from the XML file. There is also a "PDF" button that allows the user to open/save/print a PDF of the player's profile (the PDF's are static files for now but the choice of which pdf to retrive is dynamicaly supplied via the XML file.
So.... Is Edge now able to do something like this? Would it need to be a collection of small animations? could these be "assembled" and connected as an asset in dreamweaver ?
I thought I would approach this from the end (ie click on an image and display a box with dynamic TEXT fileds. ) since that is the most important part, ie displaying the dynamicaly updated profile info. Sooooo....
Can Edge display a scrolling text box with Images, static text, and html dynamic text in it??
Joel

The code is in composition ready. Click the filled {}

Embedding fonts and images for printing (press quality PDF)

I have a question about a document I have produced in InDesign that needs to go to the printers. They have told me to make sure it is a print ready document with all of the fonts and images embedded. When I convert an indd document for printing 'locally', I normally just use the Adobe PDF presets and select press quality. I thought ID works its magic and does everything required to make it print ready. Is there anything else I need to do regarding fonts and images to make the PDF ready for print?
Thanks
Mark

Thank you.
As to bleeds, the printers came back and said my pdf is okay but that yes, I need to set an extra bleed edge of minimum 3mm. Do I set this when converting to the print quality pdf or do I set this whilst working in the actual INDD document itself?
Is the bleed then on every page regardless of the content?
What are the steps for setting bleed and crop marks. Does that mean when I place an image for example on a page the image needs to hang slightly off the edges by 3mm or am I barking up the wrong tree?

Box containing text and image (fit frame to contents).

Hi all,
The best way I can describe what I am trying to achieve is to show you a picture.
So essentially, I'm looking to create a grey box, containing some text with an image floating to the right hand side. I want about 2mm space (padding) inside the grey box so no content goes right to the edge and I want the text to wrap around the image. The bit I'm finding tricky is when I go to use the 'Fit frame to content' option. I'm trying to remove the space indicated by the red arrows but if I anchor the image inside the text frame, the grey box shrinks to the height of the text and the image overflows.
This would be incredibly simple to achieve on the web, am I doing something wrong?
Any help/direction would be greatly appreciated.

Sorry, been out for an hour.
I understood that you want to have some variable height text frame (the gray box), and that this box should reduce in height to fit the text contained therein, but not less than necessary for the bottom to be 2mm below the bottom edge of the variable height image (which I'm presuming is anchored to the first line of text in the frame) in a case where there is not sufficient text for fit frame to content to avoide making the frame shorter than the bottom of the image.
I believe this could be scripted, but that will still require you to run the script. You should ask over in InDesign Scripting
As far as a container that holds both text and image frames, yes, but only if you "paste into" a new frame after creating the two separately and grouping, which probably is not what you have in mind.

N96 native rss reader font size and images

Hi!
I love the native rss reader on my N96 and I use it a lot. However there are a few things that I would like to have better:
Font size. The font is huge. Although it works if you sit in a car on a bumpy road, it would be nice to be able to adjust it.
Images don´t always fit on to the screen. Scrolling sideways is impossible because then you jump to the next topic.
Links in the news don´t work. They just open the original item in the browser window.
Sometimes the text goes over the edge, and again scrolling sideways doesn´t work.
Someone had made a better html template for the news reader on n95, but it didn´t work on my n96 so I don´t know any way how to fix these problems.
Thanks

you probably have a security sandbox issue.
what's your url?

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?

The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be.

Lync Edge and Proxy server public DNS records port forwarding rules

Hi All
I have question in regards to port forwarding rules for port 443 of simple url.
I have 4 public ip addresses.
1 edge server (4 nics , 3 running with different ip for sip, meet and dialin in DMZ network, 1 connected to internal local network).
1 proxy server (2 nics, 1 running with an ip which is in DMZ same as edge, and 1 connected to internal local network)
1 front end (lync 2013 standard installed.) connected to internal local network
1 office web apps . connected to internal local network
The question is that I am using 3 public ip addresses respectively on public DNS records for sip, meet and dialin(av) and using port 443 which has been set on edge server. So , I can use 3 DMZ network ip address on edge for sip, meet
and dialin (av) port forwarding from 3 public ip addresses as per in Microsoft document.
However, I also have a reverse proxy .Hence, my understanding is all public DNS records except SIP and port 443 should be pointed and port forwarded to reverse proxy ip address which is in DMZ network as it would redirect 443 and 80 to 4443 and 8080 to front
end.
Now the question has been clear, if simple URLs public DNS record and port forwarding rules for port 443 should be pointed to reverse proxy server, why they need to be set on each ip address and port number in Front end server topology to edge server?
If anyone knows, please give a help how to set it correct and what is supposed to be a correct configuration for a topology lync 2013

Hi George
Thanks for your reply. Attached is my topology which could make my it bit clear. You may see the public dns host record from the image. I set sip, meet, dialin , and owa 4 host records. The first 3 records are pointed to lync edge by doing a NAT with port
443 which is the same as per you said. However my understanding is they should be pointed to reverse proxy instead as for instance, I need meet.xxx.com with port 443 to be redirected to port 4443 through reverse proxy server to the front end. So when the external
customers who do not have lync client installed to their machine then we can shoot a lync meeting and send to them via outlook and they just need to click on join lync meeting link in the email to join in such a meeting based on IE. (Is my understanding correct?)
If lync web meeting works like so , then the question is why I need to set three SAME addresses in front end topology builder for edge and make them point to edge server instead?　
１. Access Edge service (SIP.XXX.COM) ---> I understand that it is used for external login lync front end.
2. Webconf edge server(Can I set to meet.xxx.com which is the same as simple URL that points to reverse proxy?) ----> If I can set this address to be the same as simple url address that points to reverse proxy, why should it need to be NATed to edge
instead? TO BE HONEST, if I HAVE tested, if I set this url as sip.xxx.com which means to use a single FQDN and ip address with port 444 and points simple url meet.xxx.com to reverse proxy, it will still work to join lync meeting sent by
outlook.I DO NOT REALLY UNDERSTAND WHAT this URL used for at this stage.
3. AV edge --- same as webconf
Regards
Wen Fei Cao

[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)

Dear Experts,
i am getting the below error when i was giving * (Star) to view all the items in DB
[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)
As i was searching individually it is working fine
can any one help me how to find this..
Regards,
Meghanath.S

Dear Nithi Anandham,
i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
Regards,
Meghanath

Error in SQL Query The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. for the query

hi Experts,
while running SQL Query i am getting an error as
The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. for the query
select T1. Dscription,T1.docEntry,T1.Quantity,T1.Price ,
T2.LineText
from OQUT T0 INNER JOIN QUT1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN
QUT10 T2 ON T1.DocEntry = T2.DocEntry where T1.DocEntry='590'
group by T1. Dscription,T1.docEntry,T1.Quantity,T1.Price
,T2.LineText
how to resolve the issue

Dear Meghanath,
Please use the following query, Hope your purpose will serve.
select T1. Dscription,T1.docEntry,T1.Quantity,T1.Price ,
CAST(T2.LineText as nvarchar (MAX))[LineText]
from OQUT T0 INNER JOIN QUT1 T1 ON T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
QUT10 T2 ON T1.DocEntry = T2.DocEntry --where T1.DocEntry='590'
group by T1. Dscription,T1.docEntry,T1.Quantity,T1.Price
,CAST(T2.LineText as nvarchar (MAX))
Regards,
Amit

Text and images not displaying, but some are

I've uploaded my site, and images and text are missing. 4 pages are great, but the individual property pages are half empty (missing images, icons and text) Its a school project, so, yikes! www.icm-mp3.net/group17/
thank you in advance

I should clarify, it all worked fine on my own server. Now, on the schools site, its missing photos going across horizontally, the lightbox that goes with, a text box, an image embedded with links. The remaining elements are in their places. Could this be a server issue?
And, clever me, it is due tomorrow.

On YouTube, I can't play playlists there. It says I need to update my Java and it is updated already. When I go to different sites like Yahoo! the links and images are all distorted. This is the second time this has happened to me now

Hello Firefox,
I am having problems with my Firefox's image processor I believe. My web browser is fine but then a few minutes later I get some weird look on my page. It then just stays here and I can't fix it. When I go to Yahoo all the links and images do not look normal. I really cannot explain this and wish I could send a picture instead. When I go to the Log in page for Facebook I do not see the image of the small faces networking around the world. It's blank and the links are widely spread apart. With YouTube the page is also distorted. Nothing is arranged properly. I can watch videos. However when I go to someone's profile or a playlist videos cannot play or show up. It says I need to update my Java player and it is already updated. It still happens when I uninstall and re install back. I was only able to fix this problem by uninstalling everything related to Firefox. I do not know how to solve this any other way. I don't like it when all my information is lost such as saved passwords and bookmarks. If there is any way to solve this thanks. I don't want to uninstall this again.

Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
You can use this manual download link:
*http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

Conditional Text and Image based on Excel column values

Hi,
I have an excel file which contains data that needs to be imported/merged in an InDesign document. I have converted that file into a CSV... I'm unable to figure out how to create document using Data Merge after evaluating some conditions on data ... Example InDesing document layout is like below and will be repeated for say 200 data rows...
Heading 1
Text 1, Text 2
Text 3
Image
Heading 1, Text 1 and Text 2 even Image value will be set after checking some condition like below
if ( column 'A' == ' ' && column 'B' == '1')
Set 'Heading 1' == column X
if ( column 'C' == '0' && file.exist(column C & '.jpg'))
Set 'Image' == column C & '.jpg'
Can someone please guide me how to create document when CSV and Images are given based on this scenario? and even if Data Merge is the right solution for this.
-- Thanks.

Data merge can only reproduce one layout, so you can't merge 200 rows and then change things unless you do it in separate documents and then combine them. Of course anything you can do via scripting or manually on a regular document you can also do to a merged document after the merge is complete.
It sounds like this is a multiple-records-per-page scenario. TO do that you set up ONE instance only of what you want to merge, in the upper left position on the page. ID then duplicates EVERYTHING that is on the page as many times as will fit using the spacing parameters you provide. This means you need to be careful with frame sizes so they don't extend beyond where they should, but it also means you can add a no-fill, no-stroke frame as a border or bounding box to make it easier to get a precise size to be used by each record. Frames in merged documents are not threaded from record to record (though there are methods for doing that after the merge, if desired), so deleting a record normally leaves a hole in the page.
If you have master page items, it's probably best to us the "none" master before the merge, then apply the correct master page after.
Peter

Preview and image capture don't save imported scanned image

Hi. Both preview and image capture aquire the scanner and displays the image overview. But when proceeding
to scan, the application simply hangs and no image is saved.
Maybe some prefs file is corrupted. Tried removing the com.apple.Preview from ~/Library/Containers, but didn't help....
What to do???

Not sure if this is relevant:
1) TWAIN-BRIDGE is installed otherwise mavericks won't talk to the scanner.
2) recently added an HP printer (no scanner). Shouldn't conflict with the scanner driver, but then again.....

Preview and Image Capture Not Recognising Scanner

Preview and Image capture have stopped recognising my networked Canon MX350 scanner. It seemed to occur after I used PhotoScore to scan some sheet music but that could be coincidence. I deleted the scanner driver and reinstalled it from the Canon website together with the MP Navigator software, and I am now able to scan from MP Navigator but not Image Capture or Preview. I have run Software Update but no updates are available.

Apple's official documentation only provides an information about printing by using this device - scanner is not listed. I would suggest to look for specific drivers on Canon's official webpage.
OS X: Printer and scanner software available for download - Apple Support

Edge and Images

Similar Messages

Maybe you are looking for