Edge Animate and Chrome Cache Problem

Strang thing with Edge Animate in Chrome on a Mac or PC. You can not reload it. It plays the first time you go to site, but if you hit refresh or try going back to the page, it will not relaod. I have to delete the cache in order for it to Play again.

Any news? I have the same problem with my animation... it has embedded audio too.
My link: Sombras en las estrellas
It works fine in Safari and Firefox, but only displays the first time in Chrome.
I'd appreciate some help!!

Similar Messages

Edge Animate's OAM file problem placed in Muse or other unknown problem?? Please help!

Hi,
I need help please. Did anyone do a whole page animation in Edge Animate and place the OAM file into Muse, and somehow all the menu and social media icon buttons in Muse are blocked by the placed animation? All my menu buttons, social media icon buttons and a link are not working (blocked by the transparent AN stage). I can't go to any other pages because of this issue when previewed in browser. My animation is a slide-open page from center of the page to both right and left side, also text moved up to the top. All are moved out of the stage once animation finished to show the home page with contents, including menu and social media icon buttons. Thanks for your help in advance!!
Thanks,
mykw123

That answers why the two G4's talk normally! I do
have the TCP/IP settings set up manually.
Well, if they are already set manually, maybe you should change them to Auto-negotiate. You shouldn't have to use the Manual setting at all. If you so, then someone, usually the people who wrote the driver for the network card, have screwed something up. It then becomes your job to fix it.
The problems are just very slow document/file
transfer from either new to old or old to new
computer over network, which usually is great with
the two G4's.
That is probably the problem. You may want to go ahead and setup the new machine with manual settings to match the G4s. Otherwise, even the Internet will be noticeably slower.
As for Target Disk Mode...so reboot the old G4
holding the T key and the hard drive should show up
on the desktop of the new computer?
That will do it. It is the best and fastest option to transfer large amounts of data. But even target disk mode is kind of slow. A real, external firewire hard drive will be the fastest of all. It is an excellent idea for backups and this kind of thing.

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

Edge Animate and typekit

Hi,
Can anyone help me please with this.
I followed the video tutorial but couldn't add the font from typekit. It would show the new font as an available, but the look didn’t change.
Best,
Lana
P.S. I did try to contact the adobe chat and phone support but was told that the Edge Animate and typekit are only supported via forum

Hi Lana_Studio,
You most likely need to add "127.0.0.1" to the list of allowed domains on your kit in Typekit.
See these articles for more information:
http://blogs.adobe.com/edge/2012/01/27/web-fonts-and-edge-together-at-last/
(Scroll down to "How to Embed Web Fonts Using Typekit")
http://help.typekit.com/customer/portal/articles/6857-using-typekit-while-developing-local ly
Don't forget to publish your kit after adding 127.0.0.1. Also, note that it may take a few minutes (I noted up to about 15 minutes) before the changes to your kit will be completely published.

Edge Animate and Fancybox Conflict

Hi,
I've created a nice little splash animation for my company's website, which is working nicely on it's own. Further down the page, we have a section that I'm trying to manually call fancybox galleries on. It works if I delete the Edge Preloader Script tag in the head, but as soon as I paste it back in, fancybox does not work again. I have other jquery scripts running on the page while the Edge script is active, so I don't think it's from multiple jquery calls. I'm at a loss here as it seems that getting rid of one or the other is the only solution and I hope that isn't the case.
You can see the code at: http://brilliant-graphics.com/BrilliantJune2013/
The manual fancybox call is on the 'Clients Section' on the gallery button for Peter Sculthorpe.
Brendan

Thank you very much for your answer.
When I give exported as HTML at the end of the process opened me is the page of the Google search engine, but when I go to the folder where I keep the project in HTML and give click to INDEX up the page but only see the color background page and do not see the animations I did in EDGE ANIMATE . It seems to me that it is wrong EDGE ANIMATE , because when I look for the assets folder, there are two animations I did in Edge Animate , and when I enter one of them and I click the HTML document animation , raises with defects in the animation , it lacks a number of images to the project. However, these missing pictures ARE ON THE IMAGES FOLDER . Then I went to Edge Animate to see how Edge Animate published as Web (not as oam file) and when I clicked the HTML document created by Edge Animate gives the same error as in Muse . I really do not understand what's happening because the preview of Edge Animate and the Muse preview look perfect . And I do not miss any ' error code or something.
I do not know what else to do , my knowledge of the programs is limited , perhaps , to be able to locate an solution .
I will be very grateful to all who can help me on this case.
Thank you

Oh wow finally apart of a community im so excited. Hi everyone. I just got abode edge animate and am not so familiar wif this product though i sense a hint of flash buried there somewhere can you guys please assist me in the basics of edge? thanks.

Oh wow finally apart of a community im so excited. Hi everyone. I just got abode edge animate and am not so familiar wif this product though i sense a hint of flash buried there somewhere can you guys please assist me in the basics of edge? thanks.

That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer.

Setting OF LD_LIBRARY_PATH AND WEB CACHE PROBLEM [SHOWING PREVIOUS PAGE ]

Dear Members,
I would request for help regarding setting of LD_LIBRARY_PATH in Oracle 11G Application server and web cache problem when any single text file edit and save the result should not be changed . it shows previous page result.
*1. Where to set LD_LIBRARY_PATH in Oracle11g Application Server (10.3.0) ? [ like in 9ias we set in opmn.xml . ] Where is opmn.xml file in oracle11g or which files contained LD_LIBRARY_PATH?*
*2. When we created program generated report it shows correct result after some changes in file and generate again it shows first means previous page result as it is not take changes in that file. Even we tried out side made one .text file and open edit and save. It's given same result. So What is the problem regarding it?*
It is the matter of Browser Cache or WEB Cache. Where is the settings of it?
*3. How to connect database (oracle11g Release 2) through OCI driver?*
Regards
Vipul Patel

If you're compiling it yourself, you should set the library path then. If not, you can try something like this:
env DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH:/path/to/add-on-libraries orca ...
but I'm not sure it will work.

Problem with Edge animate and epub3.

Greetings
I created some interactive web pages using adobe edge animate cc for a book that will be displayed on ipad (Epub 3)
when I test the web pages on pc they are displayed exactly as I want them to be.
But when I try them on Ipad It shows no images.
So I tried to append the images using some JQuey code
$('#Stage').append("<img src = '....' />");
and then when I tried to test this on Ipad all images where invisible too but when I rotated the device 90 degrees
all images became visible.
So when viewing those pages all images are invisible until rotating the device 90 degrees images become visible
any suggestions where the problem could be
I need the images to be visible when I open the page without the need of rotating the ipad
I appreciate any help.

Hello,
Please double click on the symbol and make sure "autoplay " is unchecked in the stage properties. then republish the OAM file and then try.
If the issue still persist please share the compressed project file with us to take a look at it.
Regards
Vivek

Problems with Edge Animate and back button ios and firefox

I've put a bit of Edge content in a draft webpage:
http://cassidausa.com/indexy
..and am noticing a couple of issues:
1
When viewing in ios, I click through the content (there are links to products within the Edge animation), and then press the back button on mobile safari, only the Edge content is displayed, not the rest of the page.
2
When viewing in firefox, after clicking through a link within the Edge content and pressing the back button on the browser, the animation is paused from the point it was clicked. Other browsers that I've tested this on refresh the animation.
Ideally the edge content would continue to play from where it was.This is what seems to happen when I preview the animation in the browser from Edge animate.
Any help would be appreciated.
I really need to have this working or else I'll have to abandon creating the content in Edge.

This has always been the case for any animation in CP to be on top. Please
file a feature request. Same for communication between OAM and CP, none
for the moment. You van have transparent background and pause/play button
in OAM, could be a workaround.

Constant crashes with Edge Animate and Yosemite

I'm using Edge Animate running on a macbook pro and it is crashing every few minutes (like many others are reporting).
The program is up-to-date. I have uninstalled and reinstalled it.
Sometimes after a minute or two of working, the display features disappear. Old bounding boxes remain but, with some careful cursor action, I can still manipulate the image or symbol. . . until the entire program freezes. Other times things just stop working (e.g., motion paths). The only solution is to force quit the program -- the button on the crash notice rarely works.
Each time it crashes, it seems to create another Adobe Edge Animate CC 2014.1 Helper in the Activity Monitor (don't know what that means). I've tried deleting them but it doesn't help.
In the console, I get
2/18/15 9:16:30.612 AM Adobe Edge Animate CC 2014.1[4172]: *** Assertion failure in -[NSEvent subtype], /SourceCache/AppKit/AppKit-1343.16/AppKit.subproj/NSEvent.m:2427
There are 43 lines (!!!) that are identical to the one above.
This is obviously a known problem and needs to be acknowledged and fixed!

Hi L Nordstrom,
- If you have Dropbox installed, uninstall the software and retry.
- If you are accessing files from a remote network, copy them to your local computer, and retry.
Let us know if you still face issues.
Thanks,
Preran

Edge Animate and ExCanvas.js?

OK, I've used Edge Animate to make a killer landing page prototype for a really big e-commerce/retail company and everyone whose seen it has flipped out. That's the good part. The bad part is that none of this will work in IE 7/8. SInce the mouthbreathers that use these out-dated, POS browsers makes up about 1/3 of their customers, telling them to come back after they upgrade to a real browser isn't an option.
I've tried using ExCanvas to no success to get what is essentially a timeline animation using 10 images to work. I'm missing something here, but have no idea what is is.
Will Edge Animate output work with ExCanvas.js for use in IE7/8 or is this just a pipe dream?
Please be advised: at current, I'm using EA 1.5 (CS) not 2.0 (CC).
Thanks,
jeff

Hi Jeff,
With IE <8 on the decline, we have no plans to add support for these browsers. It would take a huge amount of effort to polyfill for these and you would end up with an obnoxious payload - nobody wants that
Have you tried Chrome frame? In the publish options, you can select Chrome Frame which will prompt older IE users to run a Chrome emulation. It only needs to be run once for it to work and could be the trick to getting your clients on board.
Sarah

Edge Animate and Windows Vista?

Having tried to install and use Edge Animate I have had no success at all. The programme does not work with this operating system, and I would like a fix for this, as I want to use the programme. I am dissapointed as having just joined the Creative Cloud system I find this programme is available to me. I have seen that many others suffer from the same problem, and wonder what Adobe will do about it.

Hi, Tony-
We're using the other thread regarding the Vista issue to discuss Adobe's response. Thanks!
-Elaine

Edge Animate and iBooks Author

Hello,
Let me start by saying that I love Edge Animate! It is easy to learn with plenty of support and examples. However, I am having difficulty publishing my file to iBooks Author. After publishing my animation file, when I drop it into iBooks Author it will not animate. In this particular animation I use GreenSock GSAP exclusively. Thinking it might be my file, I published one of Adobe's example files and it does not animate either in iBooks. My animation is below:
https://files.acrobat.com/preview/9f94f319-56d2-43f6-a8b1-ff9acbc2cd1a

Ok Sarah, I'm trying to solve the problem slicing the pictures and it seems the animation get more speed but I have to slice more.
In meantime, I have a question: why if I use the 1MB size picture in an animation without symbol it works smoothly on Safari-iPad but, if I "wrap" the same image in a symbol, the animation is ver very slower?
Many thanks for your help!!
Davide

Edge Animate and PhoneGap Build

I'm using Edge Animate together with PhoneGap Build to make an iPhone app. There are several buttons that should scroll up and down and yet remain "tap-able" What is the best way to achieve scrolling effect for button?

Not sure if this helps you. I'm going through the same problem. Even raised this issue here in the forum and nobody could help me. So I sought help forum PhoneGapBuild. Looks like PhoneGapBuild not recognize <audio> of html5, so need to use api audio PhoneGapBuild own. Here's a link to my post. Tutorial on how to make by Chris Griffith. I hope this helps you too.
http://community.phonegap.com/nitobi/topics/phonegap_build_audio_and_edge_animate_problem? utm_content=reply_link&utm_medium=email&utm_source=reply_notification&reply[id]=14089620#r eply_14089620

Edge animate and Cordova build

So recently I was trying out some edge commons functions and have gotten them to work on browsers. So I wanted to do a little experiment so I've decided to try compile the project with cordova build. Well was hoping for it to work but it seems like somewhere went wrong and when I run the apk, it wasn't even able to retrieve the list of items from the JSON file.
basically the program just loads a list of items from the click of a button and you can also click on the black box on the right to display an image.
//get json information and display
$.getJSON("content.JSON")
.success(
function(data){ console.log("incoming data: ", data);
$.each(data.shoes, function(index, item){
var s = sym.createChildSymbol( "template", "content");
s.$("title").html( item.item );
s.$("description").html( item.description );
s.play(index * -500);
s.setVariable("spotlight", item.spotlight );
});//each
});//success
btw thanks joel pau for helping out previously.
does anyone here have any similar experiences when trying out cordova build with edge animate?
here are my files..
Dropbox - index.zip
Dropbox - test-debug.apk
Perhaps there's still some cordova api I'll need to add before compiling??

Not sure if this helps you. I'm going through the same problem. Even raised this issue here in the forum and nobody could help me. So I sought help forum PhoneGapBuild. Looks like PhoneGapBuild not recognize <audio> of html5, so need to use api audio PhoneGapBuild own. Here's a link to my post. Tutorial on how to make by Chris Griffith. I hope this helps you too.
http://community.phonegap.com/nitobi/topics/phonegap_build_audio_and_edge_animate_problem? utm_content=reply_link&utm_medium=email&utm_source=reply_notification&reply[id]=14089620#r eply_14089620

Edge Animate and Chrome Cache Problem

Similar Messages

Maybe you are looking for