Edge animate composition not working properly on bc

Hi,
I have placed an adge animate composition into the home page of a bc template site (www.w-o-o.me). When i view the home page in safari, the animation can take up to ten seconds before it loads. The business owner says they cannot see it at all. The same with a site i built in muse, (www.thisiscrap.co.uk) the home page marquee is an edge composition, this does not show at all sometimes and is just a blank space at the top of the screen.
Has anyone had a similar problem and if so how did you fix it?
Thank you.

Hi Liam,
Thank you very much yes that what i thought too, sorry i can't leave a link out in the forum coz the client wants to keep the project confidential at this stage, but i can PM you a link...
So you mean i have to edit the links in edge animate too? at first i couldn't get the shop template's css to load in subcategories, so i changed the links like that (/filename.css) and it worked but the edge animation wouldn't load when changing the paths for the files referred in the edge code that you put inside the head tag. So i'm guessing there must be some other paths that can't find its way around... and i found the below link last night, maybe this will work but I'm not sure how to put the javascripts and how to add the variable declaration to the root of my website like how they have mention in the below article, I'm more of a designer then a programer, but I'm learning on it, it would be great if you could tell me exactly whats that code and how to do it properly.
Adobe Edge: Embedding Animations in a Page | Daniel Hanly

Similar Messages

Edge animate is not working on a samsung note

Edge animate is not working on a samsung note
anyone have a solution ?

the older andriod browsers dont support html5 and css3.
use phonegap to make a andriod app of your edge animate web project

Edge animate composition not loading on Business Catalyst catalogue's sub-catalogues...

Hi,
I need urgent help on this one... I have this edge animation slider on the all the pages of the website and its loading perfectly on all the other pages accept the sub-catalouges of our online shop, i believe this issue is caused because if the relative URL thing, but I'm not sure how to correct this, which code should i add and to which files, please help, i have an urgent deadline to meet and i couldn't fix it, i hope you guys here would help as we paying every month for your services.
Thank you very much..
Cheers,
Sam

Hi Liam,
Thank you very much yes that what i thought too, sorry i can't leave a link out in the forum coz the client wants to keep the project confidential at this stage, but i can PM you a link...
So you mean i have to edit the links in edge animate too? at first i couldn't get the shop template's css to load in subcategories, so i changed the links like that (/filename.css) and it worked but the edge animation wouldn't load when changing the paths for the files referred in the edge code that you put inside the head tag. So i'm guessing there must be some other paths that can't find its way around... and i found the below link last night, maybe this will work but I'm not sure how to put the javascripts and how to add the variable declaration to the root of my website like how they have mention in the below article, I'm more of a designer then a programer, but I'm learning on it, it would be great if you could tell me exactly whats that code and how to do it properly.
Adobe Edge: Embedding Animations in a Page | Daniel Hanly

Buttons created with edge animate are not working on android and windows devices

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

Edge animate will not work, loads with screen gibberish

When I start Edge animate I cannot do anything with it. I can't open a file, create a new file and I see a bunch of gibberish and weird paths on the home screen. I have re-installed the program numerous times and it doesn't help the matter.
Any assistance would be appreciated.
Here is what my screen looks like when I open edge.

I may have the answer. I had the same problem - same router and iphone 4 - and after months of fishing for advice found a tip to switch the mode to 'b only'. I did this and wireless works perfectly!
Log into the router (192.168.1.1 and use admin/password) and the mode is set on the Wireless Settings page.

Edge Animate Content not working in DreamWeaver

I already insert>media>EdgeAnimateContent into the div I wanted it in. I uploaded all my supporting files to my server. Not showing up in preview or when I make the page live.

When I go to DW Live View It automatically logs me into the site and I don't get to see the index page that I am trying to put this on. This is what I see in design view...
When I publish it the An file doesn't show. When I refresh the page the "Log In" div is in the correct place for a fraction of a second and then snap up to the top (where the An should be).

Edge animate composition is not an option on insert media menu, and I subscribe to the cloud

edge animate composition is not an option on insert>media menu, and I subscribe to the cloud

If your product was installed via the Creative Cloud, you should be able to update it using the Creative Cloud. If your product was installed via other media (like from the DVD), you will not be able to update it using the Creative Cloud. Now that CC has launched, you might want to look at upgrading now and try it out now.
Thanks,
-Elaine

My edge animation is not working on Google chrome

Hii..
My edge animation composition is working absolutely fine on Mozila on google chrome it starts well but all of sudden my background image disappear and animation looks ugly without background image..
My animation link is
Untitled

Hi Newton ,
Can you try out one thing. We suspect this issue is caused because of the anti-scaling which we apply.
Just try to disable anti scaling.Follow the steps below :
This scale factor can be changed from:
1. Close Animate
2. Open the preference folder:
a. Windows: C:\Users\{username}\AppData\Roaming\Adobe\Edge Animate\4.0.0\
b. Mac: /Users/{username}/Library/Prefrences/Adobe/EdgeAnimate/4.0.0/
3. Open the AppPrefs.xml file in a text editor.
4. Search for the Current line in AppPrefs.xml:
<key>SvgAntiScaleFactor</key>
<float>10</float>
Update this to:
<key>SvgAntiScaleFactor</key>
<float>1</float>
5. Launch Animate.
However note: This setting will work only for new animate content that you create after this setting is applied - i.e it will work only for newly pasted SVG’s in a new composition.
Exiting Animate compositions opened after applying the setting(Step 5 above) will still show the same problem. You will need to delete the SVG and copy-paste again.
Do let us know if this solution helps in your case too.
Thanks and Regards,
Sudeshna Sarkar

DirectAccess on Server 2012 R2 with Single NIC behind NAT on IPv4 only Corporate Network Results in "DNS Not Working Properly"

I hit this problem at a customer site and can re-produce it in a simple lab. Lab environment: servers:
1x Server 2012 R2 DC and DNS server - DC1 - 10.0.0.1
1x Server 2012 R2 DirectAccess (DA) server - DA1 - 10.0.0.100
Servers are running "Update" (KB2919355) and following DA hotfixes:
KB2929930
KB2966087
I configured DA (via advanced wizard) as follows:
DA and remote access
AD group
directaccess-webprobehost DNA (A) record pointing to 10.0.0.100
behind an edge device (with a single network adapter)
SSL certificate from enterprise root CA issued to directaccess.contoso.com
NLS on remote server using https://nls.corp.contoso.com
DNS: corp.contoso.com = 10.0.0.1; nls.corp.contoso.com = ""
DNS suffix search list = corp.contoso.com
The DNS server validates successfully in the configuration UI.
With this configuration, I get a static IPv6 address of fd79:7a37:cbd9:3333::1/128 assigned to the NIC
The operations status is all green apart from DNS which displays the following error:
"DNS: Not Working Properly"
Error:
None of the enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 used by DirectAccess clients for name resolution are responding. This might affect DirectAccess client connectivity to corporate resources.
Causes:
Enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 are not responding.
I can, however ping fd79:7a37:cbd9:7777::a00:1 (which is the DNS64 translation of 10.0.0.1)
I would like to know what checks are failing as there are no failures in Event Viewer.
I have come across forums where people have the same issue and fix it by specifying the local IP (in this case 10.0.0.100) as the DNS server, however Richard Hicks has confirmed with me that the DNS server should be set to the DNS server, not the DA server's
IP.

Thanks for the post Matt,
ISATAP has been disabled on my DA server, so the results of a "ROUTE PRINT -6" command yields:
===========================================================================
Interface List
12...00 15 5d 01 03 64 ......Microsoft Hyper-V Network Adapter
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 IPHTTPSInterface
===========================================================================
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
12 261 fd79:7a37:cbd9::/48 On-link
14 306 fd79:7a37:cbd9:1000::/64 On-link
14 306 fd79:7a37:cbd9:1000::/128   On-link
14 306 fd79:7a37:cbd9:1000::1/128     On-link
14 306 fd79:7a37:cbd9:1000::2/128    On-link
14 306 fd79:7a37:cbd9:1000:814c:28be:46b5:52c1/128   On-link
12 261 fd79:7a37:cbd9:3333::1/128 On-link
12 261 fd79:7a37:cbd9:7777::/96 On-link
12 261 fe80::/64 On-link
14 306 fe80::/64 On-link
12 261 fe80::20c0:e848:d304:9f01/128   On-link
14 306 fe80::814c:28be:46b5:52c1/128     On-link
1 306 ff00::/8 On-link
12 261 ff00::/8 On-link
14 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
If Metric Network Destination Gateway
0 4294967295 fd79:7a37:cbd9:1000::/64 On-link
0 4294967295 fd79:7a37:cbd9::/48 On-link
0 4294967295 fd79:7a37:cbd9:7777::/96 On-link
===========================================================================

Responsive scaling of Edge Animate composition in Dreamweaver Fluid Grid Layout

I have created an animation in Edge Animate and have placed it in the header of a Dreamweaver Fluid Grid Layout. I have put it in a div by itself so it can be turned off in the mobile layout. When I test the layout in a browser, the Edge Animate composition scales responsively to the window size, but the height of the div it is in does not. The width of the div changes with the width of the window, but the height of the div remains the same. Because the height of the div doesn't change, as the animation responds and resizes it leaves a large empty space between the bottom of the animation and the content that follows it on the page.
The div itself does not have a rule for it's height associated with it. It seems to me that the div is getting its height from the original size of the html object which is the animation. I tried removing the height rule for the object, but then the div clips the bottom of the animation, and again, it doesn't resize with the window.
Is there a way I can get the div's height to resize with the size of the animation as it changes?

Thanks for your reply. You're right about most people not resizing their viewport during a session, but unfortunately the problem exists whether the screen is being resized or not. Refreshing the screen doesn't solve the problem.
The width of the div adjusts to the width of the screen as expected and the Edge Animate composition inside it does too, but the height of the div doesn't adjust. As the animation gets smaller to fit the width, the height of the div that contains it remains the same, leaving empty space at the bottom of the div. What is needed is for the div to scale to fit the page width proportionally. Instead, only the width is adjusting.
So I guess I need to know if there's either a way to force the div to scale proportionally or a way to tell it to adjust to the animation that it contains.

Upload javascript files for edge animate banner to work in Content Management System (was: how do upload...)

how do upload the javascript files for the html edge animate banner to work in my Content Management System module. At present, the html cannot function because the reference javascript files are missing.

I am not very sure how the CMS manage their content but basically the javascript files need to be in the same folder as the HTML file for Animate content to play.

Import Edge Animate compositions into In Design

Hi, how do I import Edge Animate compositions into In Design..? Cheers
p.s. perhaps i should have added: my main interest is to have the animate project imported to have it load in the adobe viewer for digital publishing. up until now I'd linked the html overlay from the standard Edge app. One of the things that caught my eye under the features for Edge animate was:
Digital Publishing support
Import Edge Animate compositions into the Adobe Digital Publishing Suite with Adobe InDesign CS6, or into Apple iBooks Author.
How I proceed: as per the help/resources:
Publish as Animate Deployment Package (.oam)
Select this export option to create a package file of your project for use in other Adobe tools. The following tools support Animate Deployment Packages: Adobe Digital Publishing Suite (DPS), InDesign CS6, Dreamweaver CS6, and Muse.
Select File > Publish Settings.
In the Publish Settings dialog box, make sure Animate Deployment Package is selected as the publish target.
Note or change the target directory.
(Optional) Specify a poster image.
Click Save to save the publish settings, or click Publish.
but all i get is
Content generation error.
[Error: Invalid URL for Web Content Overlay]

Here is a walkthrough on Adobe Dev Connectings - http://www.adobemarketing.com/devnet/digitalpublishingsuite/articles/enhancing-your-dps-fo lios-with-edge-animations.html
The only difference in that walthrough is the reference to in the Publish Settings: in Adobe Edge Animate v1, its now called 'Animate Deployment Package' instead of 'Indesign/DPS'.
Darrell

Edge Animate could not find the associated html file - anyway

We have another thread discussing this issue at http://forums.adobe.com/message/5331743
But it is out of date and marked with a green-icon positive solution, so..
still I try to reopen the issue about an error of "Edge Animate could not find the associated html file"
for me, this error remains even after opening and saving corresponding html file.
in fact I don't remember any successful launch of .an file for all my projects
working at win 7, 64 bit

ok I shared this via dropbox
https://www.dropbox.com/sh/gwknsik2j5i4pe0/TB8WGNNLMU

What can I do to solve 3G service that does not work properly on iPad3?

Hi, I have problem with my new iPad3. the thing is that 3G service does not work properly, while Edge service is ok. I realize that it is not because of my Sim, but the device itself. What can I do? any idea? thank in advance.

I wish it was that. When I turn on 3G, the signal is full. Then, when I connect internet using 3G, its signal turn to 2G, Searching, No service, searching, and finally go back to 3G agian. This happen every minute although I tried to move to a hight 3G signal.

Integrated camera not working properly

Hej hej,
I just bought a new Thinkpad E540 laptop and my integrated camera was not working properly since the begining. I used Winodws 8 before, upadated it to 8.1, installed the last drivers (at least I think I did), but the problems stays the same. Camera is not working properly as it can clearly be seen from this picture:
Link to image
It used to work for few days froperly but only when using Windows Camera application, but never in skype or other applications, so it has to be software issue.
Thanks for your help.
Kind regards,
Matej
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Lenovo has not yet released camera drivers for Windows 8.1. Below link gives list of camera drivers for Thinkpad E540. Select 'Camera and Card reader' and you get list of camera drivers.
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-edge-laptops/thinkpad-edge-e5...
In this case, you need to downgrade your OS to Windows 8 or contact Lenovo service center for Windows 8.1 camera driver.

Edge animate composition not working properly on bc

Similar Messages

Maybe you are looking for