Edge Animate constantly lagging but the other Adobe applications are not

This is the same problem as in the post : http://forums.adobe.com/message/5740804#5740804
But the only difference is that one is resolved but mine cannot be with the solution described. The solution to the edge animate lagging, as in the above post, is within the proxy server settings. But after talking to my ISP. I found out that the internet service they are provinding doesn't work on proxy servers. They said if i put any proxy server value then the internet will stop working. So, i cannot apply the solution described in the above post. I have tried restoring the preferences to default. Nothing works. So, what do i do now?
I am using Windows 8 Pro (64 Bit).

I am having another problem. I think it may have some connections.
These messages are coming when signing in to Creative Cloud & Muse.

Similar Messages

Why do I get a norwegian version of MUSE when all the other Adobe programs are in english version? I have setup the installer to English.

Why do I get a norwegian version of MUSE when all the other Adobe programs are in english version? I have setup the installer to English.

Muse uses AIR and if that is installed in Norwegian, so Muse will show stuff in that language. You may simply need to reinstall Adobe AIR in English.
Mylenium

HT4505 I have 4 accounts on my Mac Pro running Mavericks. From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner. Can print from all accounts.

Sorry, I was not given the option of posting to a Maverics community. I have 4 accounts on my Mac Pro running Mavericks. From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner. Can print from all accounts.

Hi there Ira Fletcher,
I would recommend taking a look at the troubleshooting steps found in the article below. Note: While the article was written for printer issues, many of the same troubleshooting steps apply to scanners as well.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
-Griff W.

Trying to PSE 8 as editor in IPHOTO 11 but the option "In application does not

I'm trying to use PS Elements 8 as an external editor in iphoto11, but the option "In application" does not appear as an option for Edit in:. This previously worked but now I only have the option of editing in iphoto. The move of the menu item from general to advanced seems to have screwed it up. Any one have a similar problem??

try renewing your iPhoto preference file -
A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
LN

Trying to sync but the 2 new songs are not adding, syncd ok yesterday

i synced all my songs recently, but bought 2 yesterday but they are not adding. They are ticked, i know i will be almost out of space but i think i have enough left as it is not erroring. The screen on itunes seems to sync successfully i.e no errors, but it does not show e.g. 1 of 2 songs loading.... etc. its as if it just doesnt find any new songs to load.

is the option ticked where it says sync all checked songs
and are both songs ticked

I recently got a 5S, and when I am using the phone, my cheek seems to tap the screen, and calls other people, or mutes, or enables some of the other features that are not shutting down when I am talking to someone. Can someone help, please!

I recently got the iPhone 5S, and when I am talking, my cheek will touch the various buttons on the scene, and I am calling, going mute, or touching the keypad, and such. How can I get the phone screen to stop doing this while I am talking. I have IOS 8. Thank you. Please reply in simple terms, as I am not the best at understanding how to fix things. Thanks again.

First, try a reset to see if that clears it up:
Hold down the home button and the power button together until the screen goes black and the Apple logo appears, then let go of the buttons. This will not cause any data loss and is like a reboot for your phone.

CS6 photoshop is lagging but the rest of CS6 is not, i don't think hardware is the issue.

Hardware specs:
Processor: Intel® CoreT i7-4710MQ, 6MBL3 Cache, 2.5-3.5GHz
Memory: (8GB) 8192MB, PC3-12800/1600MHz DDR3 - 2 SO-DIMM
Graphics Card: NVIDIA Quadro® K1000M 2GB DDR3
Hard Drive: 500GB 2.5" SATA3 Hybrid w/ 4GB NAND Flash
Operating System: Microsoft® Windows® 8.1; 64-bit
All of photoshop is lagging for me but my biggest issue with it is the brushstroke lag. I really need this program to work for my commissions and classwork, and have done all the troubleshooting I can on my own. I'm willing to even downgrade to CS4 if necessary, but if i can get cs6 to work that would be preferred. does anyone have a solution for this?

System requirements | Photoshop
Under Edit > Preferences > Performance, how much memory is available to PS. What is your scratch disk space? Is Use Graphics Processor checked or un-checked?
Nancy O.

HT204053 My connection Doctor says its connecting to I-Cloud but the SMTP sending accounts are not merging correctly! What do I change the settings to to merge my mail.me accounts across to this?

Hello,
Yesterday under sufference I moved across to I-Cloud from my Mobile me accounts.
I had a deadline of 30th June to merge my email accounts or they would of ceased.
In order to remain compatible I also bought the Lion OSX platfrom which was upgraded from Snow Leopard.
I have moved all my .mac and .me accounts across to I-Cloud and the Connection Doctor recognises them to allow email to be downloaded,
but its seems when the SMTP part of the loggin tries to connect its booted off the mail server.
Im know that I have probably not managed to merge across competely to I-Cloud successfully and wondered if any one can please tell me the
setting I need to change under the mail preference account profiles to ensure this will work correctly.
Thanks
Denise

Hi Roger, Thanks for your suggestions. Do you think in fact that I could delete the SMTP part of the mailservers. It appears that they are dedundant as it now says it used Icloud only?
Thanks
Denise

I need to download some video but the realplayer dowload button are not showing to me..what i have to do?

in youtube we download video's using the realplayer bottun..so why we can not see it when we use the mozzila..but i can see it when i use the internet explorer

Look at Video DownloadHelper: https://addons.mozilla.org/firefox/addon/3006

I have enabled cookies but the website says they are not therefore cannot acitivate virgin security.

I have followed all the instructions to enable cookies but this site does not agree!
I know that I have because after deleteing all old cookies new ones are now appearing as i use Firefox.

I have followed all the instructions to enable cookies but this site does not agree!
I know that I have because after deleteing all old cookies new ones are now appearing as i use Firefox.

My network, based on modem, wifi router (Airport Extreme),Time Capsule and Airport Express simply disconnects with all the lights green on the modem and Extreme, but the other components offline, 5 or so times per day. I suspect the Extreme.

I have a Cisco System3 modem, feeding an Airport Extreme, which connects wirelessly a Timecapsules and an Airport Express both of which extend the network, ie send out more WiFi signal. The system worked well for a long time, say a year and a half and then it started dropping out. All the lights on the modem and airport Extreme stay green, but the other two components are blinking yellow. I've tried limiting the channels, but there are few sources in my neighborhood. I have tried resetting the Extreme which worked for a week and now it's back to its random disconnect behavior. I have read some of these blogs and no one seems to know what to do, especially not Apple. Do I just get another router or what? What do I lose if I use a non Apple router and what would you suggest?

Welcome to the discussion area, Junkcanoe!
I don't have a setup like yours, but might be able to offer some assistance.
Basically I have two jacks, a TC and an AE and I'd like to create a roaming network. Both of them are set to bridge mode with the same SSID, WPA2 security, same password, etc.
This would be the normal way to set up a roaming network, but the wild card here is that we don't know anything about how the main router that supplies the ethernet connections (valid IP addresses) to the condos might be configured.
For example, most apartments, hotels, etc that provide ethernet jacks usually limit the number of devices that can connect to each jack. Hotels tend to limit this to one or two devices. I counted six devices that you say will work properly plus a few more. Since you have two separate ethernet jacks, you may be looking at a situation where each jack is allocated a total of 4 devices, or valid IP addresses.
The bottom line here is that we won't be able to make much progress until we know more how the main router there has been configured. Is it possible for you to ask the complex manager (who will probably need to ask the IT guy) how many devices are allowed to connect per ethernet jack? Another way to ask the same question is how may valid IP addresses will each ethernet jack allow?
If you can, could I ask you to perform an experiment? Rather than have both the AirPort Extreme and Time Capsule each connect to a separate ethernet jack, can you temporarily move one device near the other and connect them together using an ethernet cable? (Or, use a long ethernet cable if you don't want to move either device) LAN <-> port on one to LAN <-> port on the other. In other words, you'll only be using one of the ethernet ports in the condo for this experiment.
Any difference in performance or number of devices allowed to connect?
Message was edited by: Bob Timmons

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

Can I replace several elements of an array within one time? The number of elements are not fixed

Hi all,
I want to replace some elements of a 2D array, but the number of elements are not known beforehand. I dont want to do it with a loop, which may slow down the speed, and the update of elements will not happen simultaneously. The indexes of elements to be updated are not continuous. I wonder if there is a way to do that efficiently? Do I have to programme it in LabWindows/CVI? Thank you.
Best wishes,
Bo
My blog Let's LabVIEW.

Use the replace elements function. For non-continuous replacements of of multiple elements you would nee to iterate at least the number of continous pieces.
For example:
1,2,3,4,5,6,7,8,9
Replace elements 1,2,5,6,8
You would need 3 iterations in which you can replace (1,2), (5,6) and (8).
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

DNS not resolving on one Mac but the other works fine in same local network

Snow Leopard is doing something strange to the DNS or the permission to ping.
I have 2 Macs on the same local network, connect through the same ISP (verizon FIOS). One has no problem resolving any domain, but the other is constantly not resolving some domains.
The problem progresses like this:
* All of a sudden, DNS is not resolving from Ethernet (when it did perfectly well a minute ago).
* Then I switched to wireless (using the same LAN), and it resolved fine.
* Then it failed completely a few minutes later.
* Then I reboot my Mac, and it seemed to clear that, and worked for a day.
* Then it failed again in both Ethernet and Wireless; rebooting does not fix it.
* I cleared all the caches using Onyx, did "dscacheutil -flushcache", zapped the PRAM, reinstalled 10.6.2 combo update, repaired the permission, nothing works.
* Since the unresolved domain is my own domain, I changed the nameserver, and waited for it to propagate to see if that may be the problem, since it appeared that it is not resolving the A Record, and I waited 72 hours, and it is not resolved or propagating to the local DNS, but it worked perfectly well on my other Mac within the same network.
* Then I added other DNS, such as google DNS 8.8.8.8 or openDNS servers to it, but it didn't fix anything.
* Then I "ping" either the unresolved domain or my own Mac .local, and it gave me the error "permission denied". (Whereas I have no problem pinging my own Mac or the unresolved domain in my other Mac that works!).
* Then I "sudo ping" the unresolved domain or my own Mac, and it pinged perfectly well.
* Then I tried "ping6" my own Mac or the unresolved domain on the broken Mac, and it worked fine!
* Also, I used http://network-tools.com to ping it, and noticed that during the trace, somewhere along the route through te7-2.dsr02.dllstx3.theplanet.com and po2.car04.dllstx5.theplanet.com, it timed out along the route, so I don't know if the timeout could have been causing the reject, but I doubted, because "sudo ping" locally will get through but "ping" does not.
So I think I traced the Snow Leopard DNS problem as follows:
* Why does "ping6" works, but "ping" permission is denied unless the user is root?
* I tried to "chmod 4755 ping" but it won't let me.
* Is it because DNS is resolving using IPv6 but not IPv4?
* Or is Snow Leopard somehow screwed up the permission to access ping or similar DNS service?
* Why DNS has no problem in one Mac but caused problem on the other Mac, even though they are in the same local network?
* The only difference between the Macs maybe because I have Parallels installed in the Mac that failed to resolve DNS (with the extra Parallels Shared Ethernet), which may be interfering with it, but I tried to turn Parallels Shared Ethernet off, and it did not fix the problem.
Can anyone help or have any idea that I can fix this nagging bug with DNS? The DNS had worked before, but it simply quit working all of a sudden, and nothing can resurrect it.
Thanks.

Shut down Parallels and restart w/o letting any of Parallels TCP/IP stack resurrect itself. So many network issues with VM solutions. See if the problem persists. Create a new account and ping from there. Are your search domains manually entered on the 10.6 box?

Reading PDF in large screen mobile phone is often the horizontal screen reading,but the new adobe reader for Android mobile phone needs to be set to automatically turn screen, this is very inconvenient.

Reading PDF in large screen mobile phone is often the horizontal screen reading,but the new adobe reader for Android mobile phone needs to be set to automatically turn screen, this is very inconvenient.I strongly suggest that the adobe reader Android version add manually rotating screen function, the best is the default horizontal screen reading.

Reading PDF in large screen mobile phone is often the horizontal screen reading,but the new adobe reader for Android mobile phone needs to be set to automatically turn screen, this is very inconvenient.I strongly suggest that the adobe reader Android version add manually rotating screen function, the best is the default horizontal screen reading.

Edge Animate constantly lagging but the other Adobe applications are not

Similar Messages

Maybe you are looking for