Edge animate crashing while saving...

Edge animate always fails while saving one of my projects. I tried it in different systems but still the same issue. Does edge have a limit in no of symbols??? because i have about 100 symbols.... can you provide me with a patch or something for this issue. Please reply ASAP. I am attaching the project here..
http://1drv.ms/UWTgUS

In case any of the staff are trying to rectify this bug...here is something I noticed that may be helpful. When I discover that my recent change/addition has not been saved (because I must now check after each step by refreshing the html file in the browser, not just checking with control-enter) I have to close edge and restart it. When I close edge it asks if I want to save! It shouldn't be asking this, because I just saved!
I'm wondering if the issue has to do with not enough memory. It seems the problem occurs when there are too many operations during the creation of the new symbol. Edge has to remember each step, so it can give you the option of undoing. Perhaps if there are too many steps "memorized" there is not enough memory left for the save procedure?? Just a thought. If I had more ram would the problem go away? I only have 4 gigs of ram on the laptop I'm using. Do any of you guys who are having similar problems have more or less ram?

Similar Messages

  • CS Crashes While Saving

    There seems to be an incompatibility problem that causes PS CS to crash while saving under OSX 10.4.11. Crash reports say Exception: EXC_BAD_ACCESS (0x0001)
    Codes: KERN_INVALID_ADDRESS (0x0001) at 0xfffffff4 and strange folders ( ¬∂ßå∆∂´ ) are created in Home/Preferences. Apple blames Adobe. Adobe blames Apple. Either way - we're screwed.
    Any gurus out there with thoughts?

    Yes lower the allocation to about 75 -80 %.
    You need some memory for the system also before relaunching PS trash the settings folder to give yourself a clean start and also if you don't have another disk or partition as a scratch disk get one.
    To trash the settings folder
    1. Quit Illustrator.
    2.Go to User/username/Library/Preferences/ Adobe illustrator CS4 Settings and trash the settings folder, the whole folder not just the contents of the folder..
    3. Start Illustrator. Illustrator creates a new preferences file.

  • Garageband crashing while saving

    Hi all,
    I was working on a track on Garageband today on my ipad when it suddenly crashed while saving. Now whenever I open it up, it goes back to that song and won't save - so I can't access all my other files! There's an awful lot of work on those files and I really want to get them back but I've no idea how. I've tried switching ipad off and back on, but that hasn't worked - and the files aren't synced up to my PC as I haven't had access to it for a while.
    Is there a way to get back to the main screen on garageband? Please someone help, this is so frustrating!
    Thanks
    PS

    Sad to say this has now happended to me twice.
    Any help or ideas would be greatly appreciated.
    Cheers

  • Edge Animate crashes on mac laptop Yosemite

    All-
    Edge Animate has been crashing like a champ on my new Mac Laptop that runs Yosemite  OS
    Of course I'm in the middle of developing a web site for a client
    I've looked around for upgrades on the cloud...I'm up to date with version 2014.1  (there's a 2014.1.1 and a 2014.5.1) but my adobe cloud only is allowing me to download 2014.1)
    I saw a "patch" somewhere on the this site...couldn't find where to download it
    Whatever, clearly if it's this difficult to find a fix...it hasn't been fixed yet
    Can anyone help me with this problem?

    I'm experiencing the same behavior with the same setup -- New MBP running Edge Animate 2014.1.1 on Yosemite (OS X 10.10.2). I've uninstalled/reinstalled and that seemed to fix the issue but it's crashing often again. Sometimes when simply creating a new project or navigating to image files, sometimes while working in the Timeline. When it's in the Timeline, I often get 2 error popups. The first one reads "An error occurred. Please save your work and restart Edge Animate". The second reads "(unknown C++ exception)".  See images below.

  • Form Builder crashes while saving .fmb file when connected to db

    Hi,
    I am getting error The instruction at "0x679c352c" referenced memory at "0x0000001c". The memory could not be "read".
    Forms version is 6.0.8.11.3 and database version is 10.2.0.3.0
    I am doing the following steps:
    1) Open .fmb file in forms builder
    2) Connecting to database
    3) Making some changes in form
    4) Compiling (Ctrl+Shift+K) and generating form (Ctrl+t)
    5) Saving form <--- Here I am getting the error and form crashes
    If I do not connect to database then builder is allowing me to save the file
    1) Open .fmb file in forms builder
    2) Making some changes in form
    3) Saving form (Successful)
    I did some exercise just as a guess that may some part of the form is causing this error. I full expanded all components of the form i.e. blocks, canvases, triggers etc.
    This exercise produced that 3 program units were giving same error while full expending those. I deleted those 3 program units and re-created them. Now it is not showing me this memory error while full expanding all program units. I can now fully expand my full form.
    But I am still getting this error while saving the changes when I am connected to database.
    Please help.
    Regards,
    Edited by: rawat75 on Sep 2, 2011 7:13 PM

    Hi Experts,
    We are getting the same issue. Our form builder crashes once we open our custom form
    in form builder.
    Server shows:-
    Forms 6.0 (Forms Runtime) Version 6.0.8.28.0 (Production)
    Form Builder shows:-
    Forms [32 Bit] Version 6.0.8.11.3 (Production)
    How to upgrade the form builder version?

  • Adobe Edge Animate CC / 2014: Saving issue, program locks up when saving or Save-As

    Edge Animate CC (and CC 2014)  regularly freezes up when I hit save or save-as.
    When the programs does save without crashing/freezing it goes through a nail-biting screen flickering sequence, the mouse becomes inactive, the warning ‘( Not Responding)’ appears momentarily in the programme  bar, then the mouse becomes active again
    Also  as the project grew the programme became slow to respond when designing.
    The only way I can make any progress is to do incremental save-as every 10mins and half expect to loose what I’ve just worked on.
    I’ve tried updating from CC to CC 2014 , same issue.
    My system
    Alienware  Aurora R4
    Win 7 Pro
    Intel Core i7 3.60GHz
    16GB ram
    1TB HDD
    250BG SSD
    Any help would be greatly appreciated.
    Shaun

    Hi Sudeshna, thanks for replying.
    It's happening with a specific file, which is quite big, currently have around 90 graphics (png/jpeg) and 180 symbols in the project.
    In terms of features i've deliberately not used any Filters (invert, hue-rotate, contrast, etc) as they have issues in various browsers. I'm animating position and  along motion path, scale, rotation, skew, clipping, rectangle, circle rounded box, text, timeline-markers, code on symbols and code on timeline.

  • Edge animate crashes once video imported

    hi
    I'm trying to import a video into edge timeline. It imports fine and works exactly how i want on the timeline, but if i close and reopen the file edge immediately crashes, its only when i add video that this happens.
    can anyone help?
    Emily

    Hi,
    Thanks for getting back to me.
    As mentioned before, I know how to resize the video – the problem was that once it comes in incorrectly, the visible aspect ratio (black area) cannot be changed.  To help clarify, here’s a summary of exactly what happens:
    When I import the video, no matter what size or aspect ratio it actually is, it comes in at 320x45 – but the black image area is 90x45 (a 2:1 aspect ratio).  See attached image.
    When I resize the video to the correct frame size, the grab handles extend to the proper size, but the black image area remains at the 2:1 aspect ratio.  See the image in this discussion provided on October 2, showing a 720x405 video with the black area still at 2:1 (720x360).
    Since I didn’t hear back from you, I did some additional testing.  Even though the black area indicates an incorrect aspect ratio, if the video is resized to the proper frame size, it plays properly – filling the entire frame represented by the grab handles. So, the bug doesn’t affect how the video plays when previewing the project in a browser, it only affects how it appears when working with it in Edge Animate.
    At this point, I’ll consider the issue closed since I’ve discovered I can work around it.  I hope the info in this discussion can assist anyone else who encounters this issue.  However, I would appreciate your team looking into why video comes in at an incorrect size, and why the black image area appears incorrectly.  This makes it difficult to line things up when working with the video in Edge Animate.
    Thanks again for your attention to this issue and for your assistance.
    Regards,
    - Joel

  • Flash CS5 crashed while saving (unexpected error)

    When working on a flash project in cs5 my computer crashed. When I re opened it i got a text box saying unexpected file type.
    Any help, advice or answers would be great. I've been working on this project for almost a hundred hours and I would hate to lose it over a system crash. Even telling me that its gone would be a relief.
    Also I do have a swf file from the almost completed flash. Is there anyway to convert it back to flash so I can finish editing? I tried using sothink swf decompiler but when I ran it through all I got was a blank fla.
    I would greatly appreciate any words or help. Thank you

    This has happened to me twice. This time it happened with a file that crashed several times before while moving a MC attached to a IK rig. The final crash was while saving.  All I get now is "An error occurred while opening" and can not open the file.

  • PS Elements 11 crashing while saving

    Hi everyone,
    I have a problem with PSE 11 : each time I try to save a picture I made, PS crashes or just show me a "broken" window (without background or "save" button).
    When it crashes, it shows me a detailled report (I pasted the very first part of it next to that) but as i'm not very codes friendly, I don't get a line of it.
    Could someone help me please ? (I already restarted my macbook, checked for any update, deleted and re-installed PSE).
    Process:    
    Adobe Photoshop Elements 11 Editor [498]
    Path:       
    /Applications/Adobe Photoshop Elements 11 Editor.app/Contents/MacOS/Adobe Photoshop Elements 11 Editor
    Identifier: 
    com.adobe.pse11editor
    Version:    
    11.0 (11)
    App Item ID:
    571583293
    App External ID: 11641628
    Code Type:  
    X86 (Native)
    Parent Process:  launchd [153]
    Responsible:
    Adobe Photoshop Elements 11 Editor [498]
    User ID:    
    501
    Date/Time:  
    2014-04-24 23:32:31.273 +0200
    OS Version: 
    Mac OS X 10.9.2 (13C1021)
    Report Version:  11
    Anonymous UUID:  D468120D-10B6-A07C-7E6D-D204C85A5F94
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    *** CFRelease() called with NULL ***
    Performing @selector(performAction:) from sender S4WCocoaPushButton 0x11cb4510

    Go to your username>library>preferences and delete:
    com.adobe.PhotoshopElements.plist
    Adobe Photoshop Elements 11 settings
    Adobe Photohop Elements 11 paths
    To see the library,  click the Go menu in the finder and hold down the option key and it will appear below the little house for your user account. While you're in there go to the Saved Application States folder and delete any for PSE.
    Repair permissions and try again.

  • Muse crashed while saving my file, now the file is corrupt.

    I was making some new changes to my Muse site (literally 2) and went to save it. Muse, even though it opened the file from recent sites, asked me to locate the file when I said "Save." So I navigated to where the file was saved and hit "Save" again. Muse crashed. Upon re-opening Muse it asked if I wanted to re-open the file and I said yes. I get the error "Cannot Open File" with "This Adobe Muse site cannot be opened." and no records in main.active table followed by an OK button.
    So now, I am assuming I have to re-build my Muse site from scratch, or leave it unchanged on the business catalyst site. Is there any way to recover it from where it is hosted? If I rebuild it, will that cause a problem with that host space?
    Ugh.

    Please send me the original file (before being opened and resaved with the latest Muse). Given it's size, e-mail should likely work, but using a service such as WeTransfer, Adobe SendNow, Dropbox, etc. may be more convenient. Please send it to [email protected] along with a link to this thread.
    It would be helpful if you could also send the MuseLog.txt file from your Document folder. Muse may have logged some relevant errors along the way.
    Am I correct the .muse file was stored on an SMB mounted file server while being opened and worked on in Muse?
    A few bits of information that may be helpful:
    - The speed of Save is proportional to the scope of the changes since the last Save, thus Save is usually very fast.
    - The speed of Save As is proportional to the total size of your file and currently runs fairly exhaustive diagnostics prior to the actual save and also compacts the file after the save, thus it's very slow compared to Save.
    - Whenever a file is converted from an older version of Muse when you next go to Save, Muse will bring up a Save As dialog. This is to encourage you to save to a new file name, so you have the old file should you need to go back to the prior version of Muse for any reason. If you proceed to overwrite the file from the previous version of Muse, Muse should display a warning message discouraging you from overwriting but providing the choice to continue. It sounds like you never received this dialog? Regardless, overwriting should work without a problem.
    - Working on a .muse file stored on a file server will be hundreds of times slower than working on the same file stored on your local hard drive. The underlying database library Muse uses for creating and accessing .muse files has not been optimized or use an a file server. It makes many many small reads and writes. These are fast when a file is stored locally, but painfully slow over a network to a file server.
    Small world... more than 25 years ago I was installing Webasto sunroofs/moonroofs.

  • CS4 Crashing while Saving (I believe)

    Hi,
    Was wondering if anybody else has experienced this.  Pro CS4 (PC), & I doubt this has anything to do with it, but just in case - my assets have recently reached just over 1,000 (mostly quite short clips)...from say 700 a couple weeks ago.
    Pro has crashed on me a few times now, and it seems to be when I am saving (hitting CTRL + S).  I often Save the updated changes every few minutes by this process (not using automatic saving) & then I know I am good!
    However, like I said - recently, Pro has been crashing seemingly randomly (except that it is while I am Saving again).  No idea why.  And just to be clear, the "Save Project" bar (in the middle of the screen is 'saving' partially when suddenly another small screen comes up reading:
    Runtime Error!
    Program: C:\Progra...
    This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
    And one time (at least), Pro also just suddenly closed/crashed without even this notification.  Again, I believe they are all happening while I am saving (CTRL + S) my (most recent, from a few minutes before) updated version!
    and ps - I believe...that when I look in my explorer folder to see the most recent Saved edition after a crash of this sort, it turns out that Pro did not in fact save my most recent edition but perhaps the one 2 minutes before that.  Not positive on this, but 95% sure.
    Thank you for your help!

    I have only been working on 1 project (for a couple of months), & it just started a few days ago.
    And the only difference I am aware of is the additional assets, & went from using about 15 minutes on the Timeline to about 50 now (with the new assets).
    ...And unless Pro is still saving perhaps, or something.. a couple minutes after the "Save Project" tab shows it is done, and I am conflicting with it by saving again a few minutes later (even though it is 2-4 minutes later), then I don't know!
    And Hunt, no DLA options on HD in Properties, so didn't help unfortunately.
    Still hoping....

  • Program crashes while saving to documents/desktop RDS2012R2

    Hi,
    A costumer of mine has an RDs2012r2 server. There around 17 users on it.
    The server is part of domain (also 2012R2) and uses office 2013 SP1 and some thirdparty apps.
    IN total 4 servers (ad/file, exchange, database, RDS)
    But I have an issue that I cant figure out somehow.
    Most things work normal, when a User want to save something (a document from word/excel, an download from IE11 etc) to an folder in his/her Documents or Desktop, it fails. In word/excel the program get stuck, the file is created, together with an .tmp file.
    You can open the file, but its empty. When you rename the tmp file to docx, the data of the document is there.
    Downloading files to Downloads of Desktop will get stuck at 99% and if you want to cancel the download, or close IE, it gets stuck and Explorer crashes afterwards.
    When saving it to an Shared folder on the other server, there are no problems. Also you can copy those same files to Documents or Desktop without problems.
    It's only affecting users, new or existing, but not the admin accounts somehow.
    So it has probably has to something with userrights, or maybe Grouppolicies. The latter has no restriction in there own folders. Also if i check there folders/documents, that user has full access. Eventviewer has an Application Hang eventid 1001 with no useable
    info if Word/Excel crashes. Can someone help? If you need more info, please let me know.

    Hi,
    Thank you for posting in Windows Server Forum.
    As per you comment, regarding any GPO setting. Have you placed any setting related to it.
    This issue can occur if the %SystemRoot%\SYSVOL\Domain\Policies Group Policy directory structure is missing or is incorrect. The Replication service is trying to replicate the directory but cannot locate it.
    To resolve this issue, the directory must be restored to allow replication between domain controllers. This directory can either be restored from a backup or it can be recreated. You can troubleshoot missing sysvol and Netlogon shares on domain controller with
    the help of this link.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Crash while saving

    Hi,
    I am facing this problem with LV2010. I am using windows 7 32-bit.
    Please refer to my attached vis. 6dof_v10 is the main vi while TCP init_stop and TCP start are both sub vis inside 6dof_v10. I have extracted much of the algorithms inside the control and simulation loop due to sensitivity of the details.
    If you open the main vi, you will notice that the run icon is in grey as there is an unwired terminal. Once you wire up that terminal and the icon turns white, when you try to save it, it will crash and auto shutdown.
    I also notice that the problem is not unique doesnt lies with just that particular terminal. eg. i wire up that terminal and then remove another wiring, so that the run icon is in grey, i am able to save it with no problem at all.
    I am not sure what is the problem here. If you have experienced that before, please advise how i can resolve this problem. Thank you.
    Attachments:
    6dof_v10.vi ‏59 KB
    TCP init_stop.vi ‏10 KB
    TCP start.vi ‏27 KB

    anyone can offer any suggestion?

  • Illustrator CC crashes while saving anything.

    I am a graphic design student in college in my last semester and I have many projects invovling Illustrator I need to get done. Since a few weeks ago, both my Illustrator CS6 and CC have been crashing only when I save my progress. I have since uninstalled the CS6 and only have the CC version, but I go to save anything and it tells me Illstrator has stopped working and shuts down every time. I need these projects saved for Monday. Does anyone have any advice for me?

    You should know if you have installed plugins?
    In your description I see 4 different possible causes (there might be more):
    - preferences are corrupt.
    rebuild them
    Jacob has a problem solving link for that:
    See "Move the folder" on this page: http://www.bugge.com/Family-and-friends/Illy/illy.html
    - the missing printer. Illustrator saves this information into the file and if the printer is missing next time you open the file, you might run into trouble. Same if there's no printer or no printer driver or driver and printer not matching. See this one: http://helpx.adobe.com/illustrator/kb/troubleshoot-problems-printing-non-postscript.html (step 8)
    - corrupt fonts.
    You need to check them. Or simply uninstall every non-standard font and see if it works.
    - a font management application such as Suitcase or FontExplorer.
    Illustrator simply doesn't like them all too much.

  • Crash while saving Custom Datalink without matching plugin.

    Hi,
    I'm writing a plugin that is able to fetch the data required for a datalink via network connection.
    Now here's my problem:
    As long as i got my plugin installed everything works fine, opening... saving... a document you name it.
    The Problem occures after disabling the plugin opening the document (which contains my custom datalinks) and saving it again. InDesign seems to crash during the saving operation.
    Also my customlinks are not recognized in the link list without my plugin.
    Do I have to implement some sort of "backwards compatibility"? If yes, is there any kind of documentation for this?
    I'd be glad for any hints!
    Thanks and Regards,
    Michael
    p.s.: even after embedding the images and doing the open/save-procedure without the plugin InDesign goes down the drain.

    Michael,
    The SDK programming guide in the SDK has a chapter on Persistent Data and Data Conversion, it discussed topic about missing plug-in, you might want to check it out.
    Thanks1
    lee

Maybe you are looking for