Edge Animate error message, possibly related to recent upgrade

Keep getting this error message =>This file was created using a previous version of Edge Animate. This file will be automatically upgraded and saved with the suffix 'upgraded'.
- After clicking "ok"
This error message appears => An error occurred while upgrading the file
- After clicking "ok"
Project closes back to the edge animate start page
What if anything can i do to open my project?

Ask in the Edge forum and provide details like what features you actually used. Could be a script that has been updated and you may need to apply some odd trick/ hack to get it opened.
Mylenium

Similar Messages

  • Error Message, possibly related to recent upgrade

    Keep getting this error message =>This file was created using a previous version of Edge Animate. This file will be automatically upgraded and saved with the suffix 'upgraded'.
    - After clicking "ok"
    This error message appears => An error occurred while upgrading the file
    - After clicking "ok"
    Project closes back to the edge animate start page
    What if anything can i do to open my project?

    Please share that particular composition with us in zipped form (upload it to dropbox etc.) to check out the issue.
    Thanks,
    Vivekuma

  • I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2:  "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." help!

    I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2:  "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." I have dug a little bit into possible problems but haven't found a solution yet, one note is that the network connection is OK. A response would be highly appreciated!  Thanks in advance.

    Hi c1r1g1,
    If you are having an issue connecting to the iTunes Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    - Brenden

  • Edge Animate error when trying to install

    I'm getting an incomplete install when I try to download and install Edge Animate:
    Exit Code: 6
    Please see specific errors below for troubleshooting. For example,  ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s)
    ----------- Payload: DirectX 10.0.0.0 {9DDAF699-BA5E-48e3-8A09-7AC369D6EEA1} -----------
    ERROR: Third party payload installer DXSETUP.exe failed with exit code: -9

    Re: Edge Animate error when trying to install
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Edward do you meet or exceed the system requirements listed at http://html.adobe.com/edge/animate/tech-specs.html?
    Jip I sure do!
    I checked the program in discussion just for the heck of it and it works. But when using the Adobe applications manager it says not correctly installed. So I don't know what is going on there!
    It is just unappreciated to have people like Mylenium give such unhelpful replies to customers who are really keen on learning and using your new products.
    (I must probably add that I have tried installing the demo version of Photoshop CS6 when it was just released and caused a serious error. And when I wanted to uninstall it, the uninstaller suggested I use Adobe removal software to remove the demo software... this also did not work properly and I’m still stuck with a error message every time I log on to my windows account)
    But thank for the prompt reply Jeff, keep it up.

  • Form Error Message: Invalid relation attribute on pageSet xfa

    Hi,
    I've developed a form that many folks are using without any issues. However, I do have a small number of users that get the following error message when opening the form.
    Error Message:  Invalid relation attribute on pageSet xfa[0].template[0].form1[0].#pageSet[0]
    This error only appears to come up if they are using Adobe Acrobat Pro Version 8. No issues on versions 9 or 10 (X). The form is suppose to be compatible back to version 7.
    My main form is called (form1). Then there are 4 major sub forms under (form1), The top drop down (on the masterpage) hides or displays one of the major sub forms based on user selection.
    I have a hunch that something with the generated code not jiving well with Acrobat 8.
    Here's a snippet of the code if you'd like to look through it.
    form1.#pageSet[0].MasterPage1.FormActionDropDown::change - (JavaScript, client)
    //+ GENERATED - DO NOT EDIT (ID:D2FF16C4-6D1F-45D4-ACB7-0DB7CE14229F CRC:3650232787)
    //+ Type: Action
    //+ Result4: SetPresence("$Node5","hidden")
    //+ Result3: SetPresence("$Node4","visible")
    //+ Result2: SetPresence("$Node3","hidden")
    //+ Result1: SetPresence("$Node2","hidden")
    //+ Node5: form1[0].ChangePAForm[0]
    //+ Node4: form1[0].Non-PAForm[0]
    //+ Node3: form1[0].DeletePAForm[0]
    //+ Node2: form1[0].PAForm[0]
    //+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
    //+ Condition1: ListField("$Node1","textselected","ADD NON-PA User")
    //+ ActionName: DropDown.change.NonPA
    if ($.boundItem(xfa.event.newText) == "ADD NON-PA User") {
      this.resolveNode("PAForm").presence = "hidden";
      this.resolveNode("DeletePAForm").presence = "hidden";
      this.resolveNode("Non-PAForm").presence = "visible";
      this.resolveNode("ChangePAForm").presence = "hidden";
    //+ GENERATED - DO NOT EDIT (ID:662A28BD-A30A-4E6D-92CD-6FF22B0EFB5D CRC:2945493746)
    //+ Type: Action
    //+ Result4: SetPresence("$Node5","hidden")
    //+ Result3: SetPresence("$Node4","hidden")
    //+ Result2: SetPresence("$Node3","visible")
    //+ Result1: SetPresence("$Node2","hidden")
    //+ Node5: form1[0].ChangePAForm[0]
    //+ Node4: form1[0].Non-PAForm[0]
    //+ Node3: form1[0].DeletePAForm[0]
    //+ Node2: form1[0].PAForm[0]
    //+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
    //+ Condition1: ListField("$Node1","textselected","DELETE EXISTING PA")
    //+ ActionName: DropDown.change.DeletePA
    if ($.boundItem(xfa.event.newText) == "DELETE EXISTING PA") {
      this.resolveNode("PAForm").presence = "hidden";
      this.resolveNode("DeletePAForm").presence = "visible";
      this.resolveNode("Non-PAForm").presence = "hidden";
      this.resolveNode("ChangePAForm").presence = "hidden";
    //+ GENERATED - DO NOT EDIT (ID:66B7091F-75C5-4A73-8ACA-885AE42D0308 CRC:2169512649)
    //+ Type: Action
    //+ Result4: SetPresence("$Node5","visible")
    //+ Result3: SetPresence("$Node4","hidden")
    //+ Result2: SetPresence("$Node3","hidden")
    //+ Result1: SetPresence("$Node2","hidden")
    //+ Node5: form1[0].ChangePAForm[0]
    //+ Node4: form1[0].Non-PAForm[0]
    //+ Node3: form1[0].DeletePAForm[0]
    //+ Node2: form1[0].PAForm[0]
    //+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
    //+ Condition1: ListField("$Node1","textselected","CHANGE / MODIFY EXISTING PA")
    //+ ActionName: DropDown.change.ChangePa
    if ($.boundItem(xfa.event.newText) == "CHANGE / MODIFY EXISTING PA") {
      this.resolveNode("PAForm").presence = "hidden";
      this.resolveNode("DeletePAForm").presence = "hidden";
      this.resolveNode("Non-PAForm").presence = "hidden";
      this.resolveNode("ChangePAForm").presence = "visible";
    //+ GENERATED - DO NOT EDIT (ID:C87B58DB-765D-426C-81BB-5A7ECFF42B63 CRC:2949030955)
    //+ Type: Action
    //+ Result4: SetPresence("$Node5","hidden")
    //+ Result3: SetPresence("$Node4","hidden")
    //+ Result2: SetPresence("$Node3","hidden")
    //+ Result1: SetPresence("$Node2","visible")
    //+ Node5: form1[0].ChangePAForm[0]
    //+ Node4: form1[0].Non-PAForm[0]
    //+ Node3: form1[0].DeletePAForm[0]
    //+ Node2: form1[0].PAForm[0]
    //+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
    //+ Condition1: ListField("$Node1","textselected","CREATE NEW PA")
    //+ ActionName: DropDown.change.NewPA
    if ($.boundItem(xfa.event.newText) == "CREATE NEW PA") {
      this.resolveNode("PAForm").presence = "visible";
      this.resolveNode("DeletePAForm").presence = "hidden";
      this.resolveNode("Non-PAForm").presence = "hidden";
      this.resolveNode("ChangePAForm").presence = "hidden";

    You should post this question in the LiveCycle Designer forum here. This forum is for forms created in Acrobat (Acroforms).

  • Error Message: Invalid relation attribute on pageSet xfa

    Hi,
    Searching through the forums and on the net, I cannot seem to locate an answer to this problem so I'm trying here...
    I've developed a form that many folks are using without any issues. However, I do have a small number of users that get the following error message when opening the form.
    Error Message:  Invalid relation attribute on pageSet xfa[0].template[0].form1[0].#pageSet[0]
    This error only appears to come up if they are using Adobe Acrobat Pro Version 8. No issues on versions 9 or 10 (X). The form is suppose to be compatible back to version 7.
    My main form is called (form1). Then there are 4 major sub forms under (form1), The top drop down (on the MasterPage1) hides or displays one of the major sub forms based on user selection.
    I have a hunch that something with the generated code not jiving well with Acrobat 8.
    Here's a snippet of the code if you'd like to look through it.
    form1.#pageSet[0].MasterPage1.FormActionDropDown::change - (JavaScript, client)
    //+ GENERATED - DO NOT EDIT (ID:D2FF16C4-6D1F-45D4-ACB7-0DB7CE14229F CRC:3650232787)
    //+ Type: Action
    //+ Result4: SetPresence("$Node5","hidden")
    //+ Result3: SetPresence("$Node4","visible")
    //+ Result2: SetPresence("$Node3","hidden")
    //+ Result1: SetPresence("$Node2","hidden")
    //+ Node5: form1[0].ChangePAForm[0]
    //+ Node4: form1[0].Non-PAForm[0]
    //+ Node3: form1[0].DeletePAForm[0]
    //+ Node2: form1[0].PAForm[0]
    //+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
    //+ Condition1: ListField("$Node1","textselected","ADD NON-PA User")
    //+ ActionName: DropDown.change.NonPA
    if ($.boundItem(xfa.event.newText) == "ADD NON-PA User") {
      this.resolveNode("PAForm").presence = "hidden";
      this.resolveNode("DeletePAForm").presence = "hidden";
      this.resolveNode("Non-PAForm").presence = "visible";
      this.resolveNode("ChangePAForm").presence = "hidden";
    //+ GENERATED - DO NOT EDIT (ID:662A28BD-A30A-4E6D-92CD-6FF22B0EFB5D CRC:2945493746)
    //+ Type: Action
    //+ Result4: SetPresence("$Node5","hidden")
    //+ Result3: SetPresence("$Node4","hidden")
    //+ Result2: SetPresence("$Node3","visible")
    //+ Result1: SetPresence("$Node2","hidden")
    //+ Node5: form1[0].ChangePAForm[0]
    //+ Node4: form1[0].Non-PAForm[0]
    //+ Node3: form1[0].DeletePAForm[0]
    //+ Node2: form1[0].PAForm[0]
    //+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
    //+ Condition1: ListField("$Node1","textselected","DELETE EXISTING PA")
    //+ ActionName: DropDown.change.DeletePA
    if ($.boundItem(xfa.event.newText) == "DELETE EXISTING PA") {
      this.resolveNode("PAForm").presence = "hidden";
      this.resolveNode("DeletePAForm").presence = "visible";
      this.resolveNode("Non-PAForm").presence = "hidden";
      this.resolveNode("ChangePAForm").presence = "hidden";
    //+ GENERATED - DO NOT EDIT (ID:66B7091F-75C5-4A73-8ACA-885AE42D0308 CRC:2169512649)
    //+ Type: Action
    //+ Result4: SetPresence("$Node5","visible")
    //+ Result3: SetPresence("$Node4","hidden")
    //+ Result2: SetPresence("$Node3","hidden")
    //+ Result1: SetPresence("$Node2","hidden")
    //+ Node5: form1[0].ChangePAForm[0]
    //+ Node4: form1[0].Non-PAForm[0]
    //+ Node3: form1[0].DeletePAForm[0]
    //+ Node2: form1[0].PAForm[0]
    //+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
    //+ Condition1: ListField("$Node1","textselected","CHANGE / MODIFY EXISTING PA")
    //+ ActionName: DropDown.change.ChangePa
    if ($.boundItem(xfa.event.newText) == "CHANGE / MODIFY EXISTING PA") {
      this.resolveNode("PAForm").presence = "hidden";
      this.resolveNode("DeletePAForm").presence = "hidden";
      this.resolveNode("Non-PAForm").presence = "hidden";
      this.resolveNode("ChangePAForm").presence = "visible";
    //+ GENERATED - DO NOT EDIT (ID:C87B58DB-765D-426C-81BB-5A7ECFF42B63 CRC:2949030955)
    //+ Type: Action
    //+ Result4: SetPresence("$Node5","hidden")
    //+ Result3: SetPresence("$Node4","hidden")
    //+ Result2: SetPresence("$Node3","hidden")
    //+ Result1: SetPresence("$Node2","visible")
    //+ Node5: form1[0].ChangePAForm[0]
    //+ Node4: form1[0].Non-PAForm[0]
    //+ Node3: form1[0].DeletePAForm[0]
    //+ Node2: form1[0].PAForm[0]
    //+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
    //+ Condition1: ListField("$Node1","textselected","CREATE NEW PA")
    //+ ActionName: DropDown.change.NewPA
    if ($.boundItem(xfa.event.newText) == "CREATE NEW PA") {
      this.resolveNode("PAForm").presence = "visible";
      this.resolveNode("DeletePAForm").presence = "hidden";
      this.resolveNode("Non-PAForm").presence = "hidden";
      this.resolveNode("ChangePAForm").presence = "hidden";

    You should post this question in the LiveCycle Designer forum here. This forum is for forms created in Acrobat (Acroforms).

  • I get a error message when I try to upgrade Elements 12 to 12.1 [was:Upgrade]

    I get a error message when I try to upgrade Elements 12 to 12.1

    See if anything here helps:
    http://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-error.html

  • App Store Up-dates error message possible multiple Apple ID's

    I have just purchased a Macbook pro and have just seen on the Apps icon on the screen that I have 2 up-dates available, one for garageband and the other for iphoto. I tried logging in using my apple ID username and password but i keep getting an error message stating:
    "You have updates available for other accounts.To update this application, sign in to the account you used to purchase it."
    I googled the apple ID error and it led me to the apple support side where I could find out if i had multiple apple ID's linked to the same email address. It came back with 3 accounts linked to my email address.
    I have found the username's for all 3 accounts and changed the passwords to all the same and then tried to log in to Apps on the macbook but can't seem to do it.
    I was wondering if it's possible to delete Apple ID's so I only have one account. What i have noticed is that when using my iphone the old app's I have to log into my old Apple ID to download up-dates, whereas the newer apps on my phone I have to use my email address as the username.
    Wondering if anyone else has experienced the same thing as I am stumped

    Totally agree and will keep using the different login methods on my iphone.
    can't seem to still get up-dates on macbook pro apps yet I can login using my apple id and password and still purchase apps.
    crazy

  • How do i fix?I attempted to upgradeto FF27-got error message - Possibly unable to install XOR? - I found a log-it says error 32, 9 times-respond

    ''Email address removed by moderator Andrew (feer56). Please read [[Forum rules and Guidelines]]''
    I am running Windows 8 and don't really know it well.
    I need to keep all bookmarks - I don't have a back up or how to make them.
    I was attempting to update from ff26 (I think) to ff27. I received an error message saying that XOR?? objects could not be updated I THINK but am not sure of the exact message.
    I found a log called last-update.log in
    directory Owner\AppData\Local\Mozilla\updates\E7CF176E110C211B\updates
    The date of the file is 2/14/2014<br />
    This a copy of the log. (if it is the correct one)
    <pre><nowiki>****log start*****************************************************************************
    Could not disable token privilege value: SeAssignPrimaryTokenPrivilege. (1300)
    Could not disable token privilege value: SeAuditPrivilege. (1300)
    Disabled unneeded token privilege: SeBackupPrivilege.
    Disabled unneeded token privilege: SeCreateGlobalPrivilege.
    Disabled unneeded token privilege: SeCreatePagefilePrivilege.
    Could not disable token privilege value: SeCreatePermanentPrivilege. (1300)
    Disabled unneeded token privilege: SeCreateSymbolicLinkPrivilege.
    Could not disable token privilege value: SeCreateTokenPrivilege. (1300)
    Disabled unneeded token privilege: SeDebugPrivilege.
    Could not disable token privilege value: SeEnableDelegationPrivilege. (1300)
    Disabled unneeded token privilege: SeImpersonatePrivilege.
    Disabled unneeded token privilege: SeIncreaseBasePriorityPrivilege.
    Disabled unneeded token privilege: SeIncreaseQuotaPrivilege.
    Disabled unneeded token privilege: SeIncreaseWorkingSetPrivilege.
    Disabled unneeded token privilege: SeLoadDriverPrivilege.
    Could not disable token privilege value: SeLockMemoryPrivilege. (1300)
    Could not disable token privilege value: SeMachineAccountPrivilege. (1300)
    Disabled unneeded token privilege: SeManageVolumePrivilege.
    Disabled unneeded token privilege: SeProfileSingleProcessPrivilege.
    Could not disable token privilege value: SeRelabelPrivilege. (1300)
    Disabled unneeded token privilege: SeRemoteShutdownPrivilege.
    Disabled unneeded token privilege: SeRestorePrivilege.
    Disabled unneeded token privilege: SeSecurityPrivilege.
    Disabled unneeded token privilege: SeShutdownPrivilege.
    Could not disable token privilege value: SeSyncAgentPrivilege. (1300)
    Disabled unneeded token privilege: SeSystemEnvironmentPrivilege.
    Disabled unneeded token privilege: SeSystemProfilePrivilege.
    Disabled unneeded token privilege: SeSystemtimePrivilege.
    Disabled unneeded token privilege: SeTakeOwnershipPrivilege.
    Could not disable token privilege value: SeTcbPrivilege. (1300)
    Disabled unneeded token privilege: SeTimeZonePrivilege.
    Could not disable token privilege value: SeTrustedCredManAccessPrivilege. (1300)
    Disabled unneeded token privilege: SeUndockPrivilege.
    Could not disable token privilege value: SeUnsolicitedInputPrivilege. (1313)
    SOURCE DIRECTORY C:\Users\Owner\AppData\Local\Mozilla\updates\E7CF176E110C211B\updates\0
    DESTINATION DIRECTORY C:\Program Files (x86)\Mozilla Firefox
    NS_main: callback app open attempt 1 failed. File: C:\Program Files (x86)\Mozilla Firefox\firefox.exe. Last error: 32
    NS_main: callback app open attempt 2 failed. File: C:\Program Files (x86)\Mozilla Firefox\firefox.exe. Last error: 32
    NS_main: callback app open attempt 3 failed. File: C:\Program Files (x86)\Mozilla Firefox\firefox.exe. Last error: 32
    NS_main: callback app open attempt 4 failed. File: C:\Program Files (x86)\Mozilla Firefox\firefox.exe. Last error: 32
    NS_main: callback app open attempt 5 failed. File: C:\Program Files (x86)\Mozilla Firefox\firefox.exe. Last error: 32
    NS_main: callback app open attempt 6 failed. File: C:\Program Files (x86)\Mozilla Firefox\firefox.exe. Last error: 32
    NS_main: callback app open attempt 7 failed. File: C:\Program Files (x86)\Mozilla Firefox\firefox.exe. Last error: 32
    NS_main: callback app open attempt 8 failed. File: C:\Program Files (x86)\Mozilla Firefox\firefox.exe. Last error: 32
    NS_main: callback app open attempt 9 failed. File: C:\Program Files (x86)\Mozilla Firefox\firefox.exe. Last error: 32
    NS_main: callback app open attempt 10 failed. File: C:\Program Files (x86)\Mozilla Firefox\firefox.exe. Last error: 32
    NS_main: file in use - failed to exclusively open executable file: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
    ***** Log End ****************************************************************************
    </nowiki></pre>
    When I look up the version am running from Help about is shows 27.0.1.
    I tried checking for updates again and got the message that firefox is up to date.
    How do I fix this?
    I don't know where to get FF 27 download again.
    Where do I get the download?
    Do I need to uninstall and re-install or just reinstall over the existing copy.
    (reminder I can't lose my bookmarks and don't know how to back them up)
    I know little about Win8 so I dont know where things belong.
    Please reply to [email address removed]. and let me know where to find my answer
    Thanks AlfLinus

    ''Alf wrote:''
    When I look up the version am running from Help about is shows 27.0.1.
    That's the version you seem to be running, which is the latest. Although there doesn't seem to be a need for it, you can download the full 27.0.1 setup file, exit Firefox, then install on top of your current version.
    * http://www.mozilla.org/firefox/all/
    If you run into the same problem, then I suggest disabling your security software before running the setup file and re-enabling it afterwards.
    ''Alf wrote:''
    I need to keep all bookmarks - I don't have a back up or how to make them.
    Updating Firefox doesn't normally affect your bookmarks. To back them up, you can export them in HTML format as described below.
    * [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
    Email address removed by moderator
    Posting your e-mail address publicly will only lead to [https://en.wikipedia.org/wiki/Email_address_harvesting spambots] picking it up. By default, you receive e-mail updates whenever someone posts a reply to your questions, so it's unnecessary.

  • Error message F0604 related to F.5D

    Hi
    A customer payment that consist of several inoivce line items had been reset (via FBRA without reversal). Subsequently, except one payment line item reset were cleared against. I.e. as open items there is one line item remaining while the reset are in cleared section.
    Now when we are trying to execute F.5d the following error message comes up.
    Document 1400000213 3010 2008 is not a clearing document
    Message no. F0604
    Assistance with this regardis appreciated.
    Thanks
    Nadini

    Hi
    Check any entry is created in table RF048. For releases 4.7 to 5.0, no entry gets generated in that table when you reset the Clearing document. Pls see whether the note 673989 relevant to you
    Jayaram

  • CmSNXeye.exe application error message Targus related

    My computer was attacked by a virus and  MS antivirus fixed the problem.  After re-booting I keep getting the following error message-  "0x7c910f29" referenced memory at "0x000000000". The memory could not be read. CmSNXeye.exe application error.        I called for service and was told it had to do with my Targus docking station and USB replicator.  This error message comes up about every minute or so.  When I click on it, it goes away, but it is annoying.  Is there a solution to this problem that a computer illiterate person like me can solve?

    This has been covered in the forums before, but instead of searching, try this:
    Search for the file "cmsnxeye.exe" yields three locations:
    1) C:\Program Files\TARGUS\ACP50\Driver\CMdrv
    2) C:\windows\system
    3) C:\windows\prefetch\cmsnxeye.exeXXXXX.pf
    Delete the files in BOTH 2) and 3) and reboot. Let the board know how you do.
    T520 4239-CTO
    T61/p 6459-CTO (Gone but not forgotten)
    A31/p XP Pro 1 gig memory
    A30/p XP Pro 1 gig memory
    TP600 Win 2K 288 mb memory
    701C Win 98 Don't ask

  • Error Message- Sound  related

    Hi
    I am using my dual 1 gig as a dj rig. Have been using a Keyspan remote to control both iTunes and Traktor. I added an Echo/ Gina24 sound card w/ breakout box for better output control. It worked ok for a while but now the remote refuses to work and occasionally the machine will give a high pitch whistle on one channel and lock up. I have downloaded the Keyspan driver and still can't get the remote to work. The error message I am getting is : 600 unable to load DRM (for Digital remote)classickext ... ANy ideas anyone?
    Tha nks
    Enio

    I have this EXACT problem as well. I'd like to add that when either 'level' of crash occurs, when I attempt to play a video or audio file through Windows Media Player, I receive the error message: "Your computer is running low on memory. Quit other programs, and then try again" I checked on the task manager and I have plenty of RAM remaining and this error message only occurs when I am experiencing this issue so I am sure that it is caused by this.
    Flash Version: 16_0_0_235
    Operating System
        Windows 7 Enterprise 64-bit SP1
    CPU
        Intel Core i7 4770K @ 3.50GHz    44 °C
        Haswell 22nm Technology
    RAM
        8.00GB Dual-Channel DDR3 @ 666MHz (9-9-9-24)
    Motherboard
        Gigabyte Technology Co., Ltd. H97-D3H-CF (SOCKET 0)    28 °C
    Graphics
        BenQ E900HD (1366x768@60Hz)
        S24D300 (1920x1080@60Hz)
        Intel HD Graphics 4600 (Gigabyte)
        3071MB NVIDIA GeForce GTX 780 (Gigabyte)    34 °C
    Storage
        931GB Western Digital WDC WD1002FAEX-00Y9A SCSI Disk Device (SATA)    38 °C
    Optical Drives
        HL-DT-ST DVDRAM GH22NS70 SCSI CdRom Device
    Audio
        NVIDIA Virtual Audio Device (Wave Extensible) (WDM)

  • I receive an error message whenever I text recently entered contacts. It says the number is invalid. I have tried entering the number with the area code and without the area code.

    I receive an error message whenever I try to send text messages to new contacts. It says the number is invalid and to enter a 10 digit number. I have tried entering the phone number with the area code and without the area code. Any ideas?

    Same problem here. I've deleted the contact and had them text me, but when I try to text them back I get the same invalid number message! So frustrating! Please help!

  • Error messages after new MobileMe Calendar upgrade. Solved?

    Quick rundown of what I've been through and how I have solved my problem.
    I have a MacBook running 10.5.6 and I also have Bento 3. Recently Bento (Filemaker) told me that I would have to complete a few steps before upgrading to the new MobileMe calendar. So I followed the steps exactly. (URL: http://help.filemaker.com/app/answers/detail/a_id/7846/~/setting-up-bento-for-th e-new-mobileme-calendar)
    After completing the steps. I proceeded to upgrade to the new calendar. Upgraded in less than a minute and then after opening up iCal on my mac & importing my calendars, thats when things started to go wrong. I kept getting error messages on almost every even I have ever created. I could barely even quit iCal due to all the error messages. Also, many of my events werent there after importing and the progress wheel kept spinning. Complete DISASTER! (*Luckily, I made plenty of backups before doing any of this so I was safe*) But Still I had NO iCal!
    I searched and searched and could not find a complete solution. So what I did was the following and so far I believe it could be the solution to all of you guys's problems.
    I followed these instructions on this website (URL: http://answers.makeitwork.com/how-to-reset-ical-on-your-mac-or-how-to-clean-up-y our-ical/) **I followed these exactly**
    They are below:
    +Export any Calendars you wish to retain after you reset by clicking on the Calendar you wish to retain and go to File > Export… > Export…+
    +Repeat the above process for every Calendar you wish to keep. (Make sure you remember where you saved them)+
    +Quit out of iCal+
    +Go to Finder and click on your Home icon to display the Library folder.+
    +Open that folder+
    +Open the Calendars folder in the subsequent window+
    +Delete all the contents within that folder+
    +NOTE: If you open iCal at this point, it will initially appear that you cleared everything. Within minutes, however, everything will come back.+
    +Go to your Utilities folder and open the Terminal application+
    +Enter the following command: rm -rf ~/Library/{Caches,Caches/Metadata,Preferences,Application\ Support}/iCal+
    +Exit out of Terminal+
    +Open iCal and…Voila! Brand new iCal!+
    But that did not completely work. So before doing this again, I went to my iPhone and quit syncing calendars on my mobile me account. And chose to ERASE every calendar on my iPhone.
    After doing that and repeating the process above, I opened up iCal and boom, it worked. Then after I had the calendars setup the way I wanted on my MacBook, I proceeded to go to Preferences>MobileMe>Sync> and then chose to sync
    I then went to Me.com and checked to see if the calendar was operable and it was 100%. I could do everything like before. Then I went back to my iPhone and just turned Calendar syncing back on in my mobileme preferences.
    This has solved all my problems 100%. Hope this helps someone. Just remember that as long as you created a backup of your Calendar you should be safe.
    -Cody-

    Well... seems I didn't have any answer on this. I fiddled a bit more but I have to say that I really came to wits' end at this stage. A couple of observations though:
    * I don't really understand this notion of a keyboard issue. My keyboard and its layout work properly but I will not be able to login regardless of login through GDM, KDM or Slim. Yet it's worth noting that in the case of GDM and SLIM the X server starts; I see the graphical interface, I click, etc. but when I type the trouble starts.
    * I tried to check my xsessions-errors file. The file is really big under a frame buffer, and it wasn't clear to me, but I found strange that the log was reporting all sorts of attempts to start KDE. I don't exactly know what's going on.
    If anybody has any clue, let me know... It's becoming very frustrating.
    Thanks!

  • ERROR MESSAGE IN PPOME TCODE AFTER UPGRADE TO ECC 6.0

    Hi Experts,
    I have a question.
    Recently our system went for upgrade and during testing phase we have found one issue.
    Error message is appearing in PPOME transactio code after upgrade to ECC 6.0
    The screen is getting defaulted to Budget section and unable to find the subtype as there are no subtypes available there and showing error message as "Fill in all required fields".
    Please let me know your solution on this.
    Regards,
    Sekhar.

    Hi,
    - you can deactivate the budget tab in the IMG-activity 'Hide/Show Tab Page'
    (SIMG_CFMENUOHP1HFW20 alternatively use SM30 on view 'T77OCTABUS')
    1. Create new entries for the following KEY:
    a) Scenario OME0
    b) Object type 'P', 'O', 'S'
    c) Tab Page 'PBC_ORIG'
    2. for each of this entries, set the 'Exclude Tab Page'-Flag.
    - in case you do not want to deactivate the Budget tab:
    The error occurs due to missing entries for subtypes in table T778U
    for infotype 1516.
    Please maintain the according subtyes you want to use if you create a
    budget.
    Regards,
    Ana

Maybe you are looking for