Edge Animate's OAM file problem placed in Muse or other unknown problem?? Please help!

Hi,
I need help please. Did anyone do a whole page animation in Edge Animate and place the OAM file into Muse, and somehow all the menu and social media icon buttons in Muse are blocked by the placed animation? All my menu buttons, social media icon buttons and a link are not working (blocked by the transparent AN stage). I can't go to any other pages because of this issue when previewed in browser. My animation is a slide-open page from center of the page to both right and left side, also text moved up to the top. All are moved out of the stage once animation finished to show the home page with contents, including menu and social media icon buttons. Thanks for your help in advance!!
Thanks,
mykw123

That answers why the two G4's talk normally! I do
have the TCP/IP settings set up manually.
Well, if they are already set manually, maybe you should change them to Auto-negotiate. You shouldn't have to use the Manual setting at all. If you so, then someone, usually the people who wrote the driver for the network card, have screwed something up. It then becomes your job to fix it.
The problems are just very slow document/file
transfer from either new to old or old to new
computer over network, which usually is great with
the two G4's.
That is probably the problem. You may want to go ahead and setup the new machine with manual settings to match the G4s. Otherwise, even the Internet will be noticeably slower.
As for Target Disk Mode...so reboot the old G4
holding the T key and the hard drive should show up
on the desktop of the new computer?
That will do it. It is the best and fastest option to transfer large amounts of data. But even target disk mode is kind of slow. A real, external firewire hard drive will be the fastest of all. It is an excellent idea for backups and this kind of thing.

Similar Messages

Me edge animate project works when I test, but not when I publish. Please help.

I feel like this has happened to me in the past, but I just cannot get the thing to work when I post it online. It's just a blank page, all white. I think there might be something in the code of one of the .js files that I need to change.
?? I saw something about the phrase 'use strict' but I can't find that code anywhere.
There must be something I'm forgetting. I put all of the published files up on the server, and I just can't access it. Any help would be seriously appreciated.
Thanks.

Can you share the website link so that we can see what the issue is?
Regards,
Vivekuma

Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem :)

Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem

hello, this might be a preference in your google search settings. go to google.com/preferences and disable the option to ''Open search results in a new browser window''.

Attachments dont download from Gmail in Safari, They disappear,I even tried re-downloading Safari and that download disappeared, it is not in my downloads folder, I actually searched in finder for the file and it is nowhere on my computer. Please help!

Attachments dont download from Gmail in Safari, They disappear,I even tried re-downloading Safari and that download disappeared, it is not in my downloads folder, I actually searched in finder for the file and it is nowhere on my computer. Please help!

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)

I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)

I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable

I have treated photos in final cut using effects. The problem is I can not export them. Please help me. Thank you-

I have treated photos in final cut using effects. The problem is I can not export them. Please help me. Thank you-

Ernest,
This is how I do it: With all the video & still's in the time line, I click on each (even if I have to use the command key and click on each file). When each file is active I go under SHARE- go to EXPORT MEDIA- I use the Apple Pro Res codec 4:2:2. If you do not click on each file in the time line it will not be exported out.
Hope this helps.

HT1725 When I try downloading apps on my I pad it says additional information required. It then asks me to answer these questions that I have selected as my security questions. The only problem is I have forgot my answers, APPLE PLEASE HELP ME!!! Thank yo

When I try downloading apps from the app store it doesn't allow me until I have entered the security questions, the only problem is I have forgotten my answers. Please help me to find out how I can retrieve the answers back, thank you

Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me

My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me

Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy

After Effects SWF file appears black with no image. Only 2 layers in AE file (one that moves the other static). Please help!

After Effects 5.5.
I need this file as a swf but it appears black when I export.
Only 2 layers in AE file (one that moves the other static). Please help!
Thank you!

Thanks for your response. Is there no other way to get the swf file to work properly from After Effects?
What is the best way to go about using the MP4, F4V or FLV formats to save as a swf in Flash?
Can you advise how I can save it to MP4, F4V or FLV from After Effects Creative Cloud? they don't seem to be visible (I also have creative cloud)
Thank you very much

IPhoto app stops responding upon launch. Please help how I can fix this problem., iPhoto app stops responding upon launch. Please help how I can fix this problem.

iPhoto app stops responding upon launch. Please help how I can fix this problem., iPhoto app stops responding upon launch. Please help how I can fix this problem.

Please clarify:
What is your iPhoto version?
And what do you mean by "not responding"? Is iPhoto hanging and showing the spinning beachball?
Can you launch iPhoto, if you hold down the options key while launching and select or create a different library?

Problem with Edge Animate oam file's autoplaying inside Muse

Hi,
I have created a Donut Chart animation in Edge Animate. It has 6 donut charts. Each chart is a symbol with animation inside. Everything looks good in edge animate. But, the problem is the .oam file is not working like I want inside Muse. The scroll effect function of is not working. It autoplays every time, regardless of the scroll settings applied. I am using Edge Animate 2014.1.1 and Muse 2014.3.1. So, it's kind of the latest versions.
I tried several different methods. I found out that the animation works fine in Muse if I don't use any symbol in Edge Animate. Then the scroll function works like a charm. But if I use symbols, then the scroll function stops working. I want to use symbols for a reason. Because, I am making the website as a template to sell and want to include Edge Animate animations in it. Without using the symbols, it will create several objects in one place. And it would be too hard for people, with less knowledge of the program, to edit them.
What should I do now? Please help!
Best Regards

Hello,
Please double click on the symbol and make sure "autoplay " is unchecked in the stage properties. then republish the OAM file and then try.
If the issue still persist please share the compressed project file with us to take a look at it.
Regards
Vivek

How do I keep an Edge Animate banner ad file size small?

Most publishers cap the file size of banner ads at 30 KB to 50 KB. Is that possible using Edge? I know someone asked a question like this two years ago, and the reply was to use a CDN to serve the larger .js files. Is there a more direct approach now that Edge is no longer in preview? Thanks!

Hi SGPGirl,
We were just forming what became the Edge Animate team two years ago, so many questions were asked at that time. The 30k-50k ad standards were built with Flash in mind; HTML advertising standards are still emerging. In the meanwhile, we are making a continuing investment to improve the form factor of Animate output. Here are a few things we've done so far in "Publish":
- Frameworks via CDN (for jQuery)
- "Polite" preloader - this allows you to sneak-in under 30k size limits. It shows a light-weight "preloader" and then pull in a larger payload after the page has loaded. The preloader UI contains a meter that indicates the gzipped size of the preloader including its resources.
- Compressed composition output. When published, the animation (xyz_edge.js) is written in an efficient/compact form that shaves as much as 80% from the composition size.
I'd be grateful for your perspective on the "polite preloader" approach vs. trying to fit the entire composition into 30k. If Animate were to support an "areo-gel weight" output format, what kinds of experiences would you expect to produce with it? If you have any examples, please share!
- Josh

Text Edge preview 6, .oam files

Hi Adobe Team
I am creating a folio. I have text on top of an imported edge .oam file in InDesign.
When I launch the folio, the text appears for awhile then disappears when the animated edge runs.
My only other choice is to not place the text in the image but that would defeat the purpose. How can I solved this issue?
Angelique Anderson

They’re called overlays for a reason. You cannot put static content above them.
You can try turning the text into a button that, IMO, is a rather dangerous workaround. Why not just put that text right into the Edge file?
Bob

Edge Animate loads JS files twice

HI,
Does anyone know why Edge animate loads all the javascript files and JQuery and Edge Libraries twice. Is there a way to prevent or override this?
When profiling my animation with Safari and Chrome, in the Network requiements you can see that these file are loaded twice, increasing the network requirements.
It seems that the first time the format is not recognized given that the icon next to the files is for IMG. The second time it is loaded then it gets the icon for JS.
Has anyone seen this?

Sarah,
Yes, this is the only way Yepnope 1.0.x works and 1.5.x still does such things. There are changes in this area in 1.5.x though. Yepnope exposed two direct methods to inject JS and CSS files. So yepnope({load: ...}) will preload files first and inject them after. Direct methods don't preload files. As far as Edge Animate doesn't use full power of yepnope, there is good chance that direct method will work good:
yepnope.injectJs( scriptSource [, callback ] [, elemAttributes ] [, timeout ]);
yepnope.injectCss( stylesheetSource [, callback ] [, elemAttributes ] [, timeout ]);
Simplest testcase:
<!DOCTYPE html>
<html>
<head>
          <script src="http://cdnjs.cloudflare.com/ajax/libs/yepnope/1.5.4/yepnope.min.js"></script>
          <script>
                    yepnope.injectCss('http://cdnjs.cloudflare.com/ajax/libs/1140/2.0/1140.css');
                    yepnope.injectJs('http://cdnjs.cloudflare.com/ajax/libs/Base64/0.1.3/base64.min.js')
          </script>
</head>
<body>
</body>
</html>

Oam file wont loop in muse?

Hello there,
I just ran into a small problem with Muse where an adobe edge animate file I placed in fails to loop when previewing in the browse. The file loops fine when I preview it in adobe edge animate but
for some reason Muse only plays it once.
any suggestions?
Thanks

Does it loop when you publish it to the web?

Edge Animate's OAM file problem placed in Muse or other unknown problem?? Please help!

Similar Messages

Maybe you are looking for