EDGE animation plays before I come to the page in an Article

Hello,
I have created an EDGE animation, and, it plays before I get to the page in an Article.
I have created other animations and placed them into articles and other folios, but, on this, it does not play correctly. I would like it to play upon entering the page or going to the page. but, when I enter the page it has already palyed. Might you have some hints or answers?
Thank you,
L

Need to set a delay on it with Folio Overlays panel I believe, little tricky if
its in a smooth scrolling page as that maybe loaded in one go, even
though it should tile.

Similar Messages

  • DPS and Edge - animation plays before page loads

    Hi-
    I have had a continuing challenge with animations created in Edge and placed into an Adobe DPS document. Short animations that are intended to play when the viewer gets to the page (onload) are already finished playing when the page is viewed. Other CSS3 and jquery based animations load as expected only when the page is navigated to and "in view".
    I was excited for the latest Edge release and CS6 hoping that this issue had been resolved, but it is still happening for me.
    Has this been resolved? Using an event handler or not checking "Autoplay" and requiring user interaction to initiate the animation are not the effect I want.
    Did you find a resolution to this?
    I also posted this question to the Edge forum...
    Thank you!!
    Shawn

    I don't recall mentioning onLoad, but since you mention it...
    Edge triggers auto-play animations off the onLoad event right now. In DPS publications the correct event to trigger on is onAppear. We're working with the Edge team to make sure that when you publish for DPS the auto-play animations look for the right event.
    Neil

  • Bootstrap, height of edge animation and others div content in the page- overlay issue

    I’ve a problem with the position others div tags in a page with a edge animation in the top (in the below example, div “box-animation”… export it with “publish target: Web”).
    The static content (in the below example, class “content-static”) is always overlay to the animation, instead to view it below div “box-animation”.
    The first solution is to set an height for edge animation container (for example, #box-animation height: 500px) but its very complicate to manage it with responsive website.
    So, how to view the static content in a div tag after an animation create with edge animate, to avoid overlay effect?
    This my first animation with Edge Animate and I always thought that the animation would have been placed in the html order of the webpage...
    Thanks
    Example:
    <body>
    <div id=“box-animation”><div id="Stage" class=“animation1…”>[edge animation]</div></div>
    <div class="container">
      <div class="row">
        <div class="span12">
          <div class=“content-static”><p>Test content</p></div>
        </div>
      </div>
    </div>
    </body>

    Hi... put a trasparent gif image, with the same animations's width/height, in the first div after the edge code container.
    If you want responsive layout, remember to remove width/height values.
    <body>
    <div id=“box-animation”><div id="Stage" class=“animation1…”>[edge animation]</div></div>
    <div class="container">
      <div class="row">
        <div class="span12"><img src="images/spacer.gif" alt=""/>
          <div class=“content-static”><p>Test content</p></div>
        </div>
      </div>
    </div>
    </body>

  • Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

    Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.

  • Why won't my adobe edge animations play from the start each time they are loaded on an Adobe DPS layout?

    Hi there
    I have an adobe DPS document with several pages, and edge animations on each page. I want each animation to play from the start when each page is opened, however, the playback seems to be very inconsistent. Some animations play from the start, others half way through, and some playback incorrectly. I want to also be able to return to each page and have the animations reload, instead of just displaying the final frame of the animation.
    I have played around with the delay time which doesnt seem to fix it.
    Any advice would be greatly appreciated.
    Dan

    Hi, Im DPS projects medias like video, audio, animation html5 dosen´t reload inside the same article, just between the articles. Better produce articles just one page and change pages with horizontal swipe Regards

  • Edge animation  only plays when I arrive at the page from the next page

    Hi Everyone, I'm really at my wit's end. Everythign was working fine Friday and then on Sunday, it just stopped.
    I have several a 13 page Indesign CS6 file, one .OAM file per page. Page 1 plays fine, but when I advance to page 2, the box with the .OAM file flashes, then nothing. The rest of the pages play fine, but if I were to swipe to page 3, then back to page 2, page 2 now plays fine. But if I were to swipe from page 2 to page 1, page 1 does not play.
    What's even more odd is any animation I move to page 2 will not play. So if I were to put a blank page as page 2, the non-working page 2 will now animate when it is moved to page 3.
    This is an important job, is there a higher level of Adobe tech support I can subscribe to for 1 on 1 help?

    Good point, Alistair. I've started rebuilding each page in a new InDesign document and things were going smoothly, until I reached the 8th page, which contains the 8th .OAM (there's one per page). Now, some animations have stopped displaying—same as my original problem. The similarity is while I had 13 pages built up in the original document, it started getting buggy once the 8th .OAM went in. Maybe I've reached the limit to what InDesign/DPS can handle? And once the glitch was set in, it didn't matter if I reduced the file down to 2 pages, the error remained.
    Is it possible to divide up the document to two files, pages 1-7 and pages 8-13, then use DPS to combine them for the iPad?
    I have plenty of RAM and hard drive space. 16GB RAM, 5 TB storage space, 470 GB internal.

  • Why won't my Edge animation play in DPS?

    I've created a very simple animation of svg elements fading from 0-100% opacity (no code) in Adobe Edge. When I import it into folio (set for for iPad) the animation would not play. When I preview it on desktop, I would only see the poster image and then quickly fade to white. From what I've read in one of the other forums, I have the Edge animation set up for retina (2048x1536), and then in InDesign: 1024, in folio: 2048; however, still no luck. I published the animation for Animate Deployment Package (oam), really can't think of anything else that might have gone wrong...
    Please help, thanks!

    Hi Elaine,
    This is Annie, I just updated my account to the company's account.
    Thank you so much for for your help, I was able to download the zip file. As it turns out I wasn't using the latest edge animate and indesign. After updating everything, as well as downloading the DPS destop tool kit http://www.adobe.com/support/downloads/detail.jsp?ftpID=5571 I tried to open the file you sent me. I got the error message: An error has occured while generating article preview. Could not find the adobe content viewer. So I tried to download the content viewer again but still, same message. I really can't figure out why...
    .Annie

  • Stopping Edge animation play after page visit.

    I have an Edge animation as a banner on my homepage. I was wondering how, if for example someone landed on my homepage the animation plays out, then navigates to my portfolio page, then back to the homepage, the animation would not play again. I think I'm trying to go the more is less route, also I think it will increase overall page loading speed, than trying to replay the animation everytime you return to my homepage. I hope this made sense. Thanks.

    Hi there, the first thing that comes to mind is to use session storage. Set a variable "isFirstTime", and check it on Stage.compositionReady in Edge. You can then jump to the end of your timeline, effectively skipping the animation. Alternately, you could set and check session storage outside of Edge, and swap out the div's contents to either contain Edge content, or a static image, etc.
    Here is a good example:
    http://www.w3schools.com/html/html5_webstorage.asp
    Session storage stores data until the user closes the browser, so they would see the animation again if they closed the browser and visited your site they next day, but they wouldn't see it again on the same visit.

  • Edge Animation plays only after page refresh in Firefox

    There is an issue with animation playback in Firefox (I have the newest version - 27.0) - it works only after page reload or if you go to another page and come back to the home page.
    I've saved Edge animation as .oam package and placed into Muse. My animation is floating clouds right above roof on homepage.
    When I open html generated by Edge Animate in Firefox it works perfectly at once.
    Please help!
    I would appreciate any advice.
    Thanks!
    Here is my site http://www.digidom.kz.

    Same FF version here, your page loads fine here, upon first visit and subsequent visits.
    Have you tried clearing out browser cache; restart FF then reload/revisit your page.
    Darrell

  • Edge animation doesn't work when on the net

    Hi
    Built the Muse site. Placed the Edge Animate .oam file in the pages. Tested it in the browsers. All running great.
    BUT now when I upload the site to the net, the Edge Animate animation doesn't work in any of the browsers.
    Why not?
    Am I meant to be uploading other files with the animation?
    How can I remedy to make it all work…as it should?
    KR
    Steve

    Hi Vivek
    In the web checking section of my site, I've used the animation at the bottom of all the pages (under the rule) of this site :
    Home
    Hopefully you can tell me how to fix. BTW I don't use Dreamweaver. I only use Muse.
    Steve

  • With purchased music videos they will not play, an error comes up"The requested URP was not fopund on thsi server", and video doesn't play?

    I ahve purchased 5 music vidoes from iTunes and they will not play on my iPhone4. The error message that appears is:
    "The requested URL was not fopund on this server"
    I am not sure how to fix this so I can watch my videos?

    It all depends on exactly how you move the library from one machine to the other. The database holding information about your library is normally in a folder called iTunes, with the media in a subfolder called iTunes Media. In this layout you can usually copy the entire iTunes folder from one machine to the other and it will work. If the media folder is split to a new location however then often the links to tracks will fail on a new computer.
    You shoud find that the FindTracks script is able to repair the links in your library.
    I'm not sure I know what is going on with the purchased music, however if you enable Edit > Preferences > Store > Automatic Downloads > Music you should be able to recover your past store purchases.
    tt2

  • Audio from youtube video continues playing after i have left the page. please help. thanks

    im pretty new to mac and not sure if this is the norm or not but want to know how to turn it off if possible. if im watching a video on youtube and i click back or the youtube icon to go back to the home page the audio continues playing from the video. this stops when i playing another video or close the tab. not sure if its a setting somewhere that i cant find or some sort of glitch. thanks

    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
    2. Safari > Preferences > Privacy
        Press the button “ Remove All Website Data”.
    3. Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        "Develop" menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.

  • Multiple Behaviours on EventTrigger, how to have an animation play and then navigate to new page?

    Hi
    Very new to this and coming from a VB6 background.  I have a Login Grid that I want to scroll off the screen on a successful login attempt and then navigate to a new page in a WPF application.  How do I achieve this please, I have added a ControlStoryboardAction
    that plays the animation and also a NavigateToPageAction but I don't seem to be able to get them to work in a sequence, i.e. do the ControlStoryBoardAction first and when the animation stops then do the NavigateToPageAction. Its the sequencing that I'm
    having trouble with.
    I'm used to different Forms for each 'screen' coming from my VB6 days so maybe my approach is off?  Any help is much appreciated.
    Thank you

    Split the button from the image of the button:
    Put your 'poster' graphic on a PDF entirely on its own and import it as a layer with print turned off, as you've done, but add the sound and the button to the PDF as normal - setting the button to the 'invisible rectangle' style. The button will still "print" but of course there's nothing visible.
    The Import as layer feature in Acrobat works, but to be blunt it's a bit of an afterthought, and doesn't like anything strange on the layers you bring in. OCGs (layers) came from Illustrator as a way to move files between applications, and Acrobat needed to have some basic grasp of them just to fiddle about with stuff like watermarks, but it's not a full-featured OCG editor.

  • My home page tells me I need to upgrade my browser before I can see the page contents. What do I do?

    www.insightbb.com sends me this message when I open 4.0 or enter he address in to the bar. What has to happen to get the homepage to open? here is the image address.
    http://www.insightbb.com/images/browser/upgrade-browser.gif

    You can try to spoof the user agent as Firefox 3.6.14
    *User Agent Switcher: https://addons.mozilla.org/firefox/addon/59
    *Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.14) Gecko/20110218 Firefox/3.6.14

  • Tried to buy on News Stand or in the App Store and Shutterfly comes on the page with no way to remove it???

    How can I remove Shutterfly from my App Store sight and it appears on my Newsstand sight also ,I evenbought it to later delete it and I can't get it off

    Close the Sam's Club app completely and then reboot your iPad.
    Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the Sam's Club app and then swipe "up" on the app preview thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for

  • Upgraded to Adobe Reader XI, and now can't print to PDF.

    I recently upgraded to XI, and now the option to print to PDF no longer appears in my print dialog box.  Help!

  • Itunes won't automatically update

    Just recently my computer deleted all my itunes songs, so I bought the program iTunes Jack to take all the songs from my ipod and put them back on itunes. Now when I plug in my ipod it tells me my ipod is synced with another library. when I ask it to

  • Problem installing J2SE - Error 1324

    For some reason the same error keeps apearing every time i try to run the installation, followed by "The path My Pictures contains an invalid character". I even tried moving the program to a different drive that's empty. After that didn't work i just

  • LR 2.1 Softproofing with CS3 Smart Object

    I have seen Jeff Schewe use a duplicate of the image to smart proof at least until Adobe gets this in LR (Can't Wait!) but some discussions say edit in a smart object. What advantage does this have over the way Jeff does this and is it done the same

  • Create reusable BPM Human Task Form across Projects

    Hi, I have a challange in my project. I have a BPM application with many BPM process inside, and each BPM process has its own human tasks. Is easy for each HT create a form in a jspx file, for that an independent project is created. The challange is: